Electroless nickel stripping process

Product Stripping Additional free information on any of these items can be obtained by circling the appropriate number on the reader service card. Turn-Key Stripping System Pressure Blast System Blu-Surf Inc. Guyson Corp. Parma, Mich. Sara toga Springs, N. Y: Blu-Surf Inc. designs and manufactures a turn-key stripping system for the removal of cured hydrocarbon coatings from hooks, racks, fixtures, and parts. This system addresses both primary and secondary clean up. Blu-Surf systems include burn-off ovens (batch and continuous), wash booths, cure ovens (powder and liq- uid), stress relieving ovens, dry-off ovens, and thermal oxidizers. Along with heat process equipment, Blu-Surf offers complete design and manufacturing services for washers, spray booths, and conveyors. Guyson Corp. has introduced a new line of lower-cost pressure blast cabinets for coating removal and other applications. The enhanced design incorporates efficient dust/media separation and an ASME-certified pressure vessel in a more compact, cabinet-mounted media de- livery module. The manually operated system is com- patible with all types of polymer media for rapid, non- destructive stripping and cleaning. Circle 101 on reader information card Electroless Nickel Stripping Process Pate/in Chemical Co. Inc. Yonkers, N. Y Circle 103 on reader information card Patstrip 1OOlF is a noncyanide alkaline stripping process that was specifically developed to remove electroless nickel plate from steel by immersion. Operating at the temperature of 17.5 to 195”F, the new Patstrip lOOIF stripping solution will strip at the rate of 0.0005 to 0.0015 inches per hour for nonheat-treated deposits of conventional electroless nickel. Stripping rates of high phosphorus and high-corrosion-resistant deposits are slower. One gallon of lOOIF Electroless Nickel Stripper will dissolve from 2.5 to 5 mils of electroless nickel deposit. Electroless Nickel Stripper Fidelity Chemical Products Corp. Newark, N. J. Circle 102 on reader information card Fidelity 3 136 has been specifically formulated to strip all types of electroless nickel coatings, including high- phosphorus deposits, by simple immersion. It is suitable for use on ferrous, copper, brass, and Monel substrates. The 3136 has been used for many electronic packages that contain glass-to-metal seals and brazed parts. Circle 104 on reader information card METAL FINISHING ?? JULY 1996 0 Copyright Elsevier Science Inc. 23

Upload
phamnguyet
Category

Documents
view
221
download
4

Embed Size (px):

Transcript of Electroless nickel stripping process

Page 1: Electroless nickel stripping process

Product Stripping

Additional free information on any of these items can be obtained by circling the appropriate number on the reader service card.

Turn-Key Stripping System Pressure Blast System Blu-Surf Inc. Guyson Corp. Parma, Mich. Sara toga Springs, N. Y:

Blu-Surf Inc. designs and manufactures a turn-key stripping system for the removal of cured hydrocarbon coatings from hooks, racks, fixtures, and parts. This system addresses both primary and secondary clean up. Blu-Surf systems include burn-off ovens (batch and continuous), wash booths, cure ovens (powder and liq- uid), stress relieving ovens, dry-off ovens, and thermal oxidizers. Along with heat process equipment, Blu-Surf offers complete design and manufacturing services for washers, spray booths, and conveyors.

Guyson Corp. has introduced a new line of lower-cost pressure blast cabinets for coating removal and other applications. The enhanced design incorporates efficient dust/media separation and an ASME-certified pressure vessel in a more compact, cabinet-mounted media de- livery module. The manually operated system is com- patible with all types of polymer media for rapid, non- destructive stripping and cleaning.

Circle 101 on reader information card

Electroless Nickel Stripping Process Pate/in Chemical Co. Inc. Yonkers, N. Y

Circle 103 on reader information card

Patstrip 1OOlF is a noncyanide alkaline stripping process that was specifically developed to remove electroless nickel plate from steel by immersion. Operating at the temperature of 17.5 to 195”F, the new Patstrip lOOIF stripping solution will strip at the rate of 0.0005 to 0.0015 inches per hour for nonheat-treated deposits of conventional electroless nickel. Stripping rates of high phosphorus and high-corrosion-resistant deposits are slower. One gallon of lOOIF Electroless Nickel Stripper will dissolve from 2.5 to 5 mils of electroless nickel deposit.

Electroless Nickel Stripper Fidelity Chemical Products Corp. Newark, N. J.

Circle 102 on reader information card

Fidelity 3 136 has been specifically formulated to strip all types of electroless nickel coatings, including high- phosphorus deposits, by simple immersion. It is suitable for use on ferrous, copper, brass, and Monel substrates. The 3136 has been used for many electronic packages that contain glass-to-metal seals and brazed parts.

Circle 104 on reader information card

METAL FINISHING ?? JULY 1996 0 Copyright Elsevier Science Inc. 23