Electro-Flow Controls Ltd Design, Manufacture and Support · PDF fileDesign, Manufacture and...
-
Upload
doannguyet -
Category
Documents
-
view
214 -
download
0
Transcript of Electro-Flow Controls Ltd Design, Manufacture and Support · PDF fileDesign, Manufacture and...
The use of the UKAS Accreditation Mark indicates accreditation in respect of those activities covered by the accreditation certificate number 015 held by NQA.NQA is a trading name of NQA Certification Limited, Registration No. 09351758. Registered Office: Warwick House, Houghton Hall Park, Houghton Regis, Dunstable Bedfordshire LU5 5ZX, United Kingdom. This certificate is the property of NQA and must be returned on request.
Page 1 of 2
This is to certify that the Quality Management System of:
Electro-Flow Controls Ltd
Hareness Road, Altens Industrial Estate, Altens, Aberdeen, AB12 3LE, United Kingdom
(Central function listed above. See appendix for additional locations)
applicable to:
Design, Manufacture and Support of instrumentation, Control and Monitoring Systems for Safe and
Hazardous areas encompassing Drilling, Well Control, Riser Gas Handling/Managed Pressure
Drilling and CCTV systems for Drilling Rigs & Platform (Onshore and Offshore) and Marine
applications
has been assessed and registered by NQA against the provisions of:
BS EN ISO 9001:2015
This registration is subject to the company maintaining a quality management system, to the
above standard, which will be monitored by NQA
FManaging Director
Certificate No. 18360
13 August 2004ISO Approval Date
Reissued 8 September 2016
Valid Until: 8 September 2019
EAC Code: 19
The use of the UKAS Accreditation Mark indicates accreditation in respect of those activities covered by the accreditation certificate number 015 held by NQA.NQA is a trading name of NQA Certification Limited, Registration No. 09351758. Registered Office: Warwick House, Houghton Hall Park, Houghton Regis, Dunstable Bedfordshire LU5 5ZX, United Kingdom. This certificate is the property of NQA and must be returned on request.
Page 2 of 2
ISO Approval Date 13 August 2004
Reissued 8 September 2016
Valid Until: 8 September 2019
Appendix to Certificate Number 18360
Includes Facilities Located at:
Electro-Flow Controls Ltd
Certificate Number 18360
Hareness Road Altens Industrial Estate, Altens
Aberdeen AB12 3LE
United Kingdom
Electro-Flow Controls Ltd
Certificate Number 18360
Unit 1a Station Court, Station Road
Leeds Yorkshire LS20 8EY
United Kingdom
Electro-Flow Controls Ltd
Certificate Number 18360
Horizon Scotland The Enterprise Park
Moray IV36 2AB
United Kingdom
EFC-Americas Inc.
Certificate Number 18360
1424 West Sam Houston Parkway Way North
Suite 140
HOUSTON TX 77043
United States of America
The use of the UKAS Accreditation Mark indicates accreditation in respect of those activities covered by the accreditation certificate number 015 held by NQA.NQA is a trading name of NQA Certification Limited, Registration No. 09351758. Registered Office: Warwick House, Houghton Hall Park, Houghton Regis, Dunstable Bedfordshire LU5 5ZX, United Kingdom. This certificate is the property of NQA and must be returned on request.
Page 1 of 1
This is to certify that the Quality Management System of:
Electro-Flow Controls Ltd
Horizon Scotland, The Enterprise Park, Forres, Moray, IV36 2AB, United Kingdom
(This certificate is part of a multi site registration refer to certificate 18360 for additional info.)
applicable to:
Manufacture and Support of Mechanical Handling, Instrumentation, Control and Monitoring Systems
for Safe and Hazardous Areas, encompassing Drilling, Well Control, Riser Gas Handling/Managed
Pressure Drilling and CCTV systems for Drilling Rigs & Platform (Onshore & Offshore) and Marine
applications
has been assessed and registered by NQA against the provisions of:
BS EN ISO 9001:2015
This registration is subject to the company maintaining a quality management system, to the
above standard, which will be monitored by NQA
FManaging Director
Certificate No. 18360/3
10 September 2013ISO Approval Date
Reissued 8 September 2016
Valid Until: 8 September 2019
EAC Code: 19
The use of the UKAS Accreditation Mark indicates accreditation in respect of those activities covered by the accreditation certificate number 015 held by NQA.NQA is a trading name of NQA Certification Limited, Registration No. 09351758. Registered Office: Warwick House, Houghton Hall Park, Houghton Regis, Dunstable Bedfordshire LU5 5ZX, United Kingdom. This certificate is the property of NQA and must be returned on request.
Page 1 of 1
This is to certify that the Quality Management System of:
Electro-Flow Controls Ltd
Unit 1a, Station Court, Station Road, Guiseley, Leeds, Yorkshire, LS20 8EY, United Kingdom
(This certificate is part of a multi site registration refer to certificate 18360 for additional info.)
applicable to:
Design, Supply & Project Management of Mechanical Handling and Associated Equipment
has been assessed and registered by NQA against the provisions of:
BS EN ISO 9001:2015
This registration is subject to the company maintaining a quality management system, to the
above standard, which will be monitored by NQA
FManaging Director
Certificate No. 18360/2
21 January 2011ISO Approval Date
Reissued 8 September 2016
Valid Until: 8 September 2019
EAC Code: 19
The use of the UKAS Accreditation Mark indicates accreditation in respect of those activities covered by the accreditation certificate number 015 held by NQA.NQA is a trading name of NQA Certification Limited, Registration No. 09351758. Registered Office: Warwick House, Houghton Hall Park, Houghton Regis, Dunstable Bedfordshire LU5 5ZX, United Kingdom. This certificate is the property of NQA and must be returned on request.
Page 1 of 1
This is to certify that the Quality Management System of:
EFC-Americas Inc.
1424 West Sam Houston Parkway Way North, Suite 140, HOUSTON, TX 77043, United States of America
(This certificate is part of a multi site registration refer to certificate 18360 for additional info.)
applicable to:
Sales, Support and Distribution of Mechanical Handling, Instrumentation, Control and Monitoring
Systems for Safe and Hazardous Areas, encompassing Drilling, Well Control, Riser Gas
Handling/Managed Pressure Drilling and CCTV systems for Drilling Rigs & Platform (Onshore &
Offshore) and Marine applications
has been assessed and registered by NQA against the provisions of:
BS EN ISO 9001:2015
This registration is subject to the company maintaining a quality management system, to the
above standard, which will be monitored by NQA
FManaging Director
Certificate No. 18360/1
28 January 2013ISO Approval Date
Reissued 8 September 2016
Valid Until: 8 September 2019
EAC Code: 19