ELECTRICAL TOOLSBENEFITS• Crimps up to 750 kcmil

(MCM) cable• Slim, ergonomic latching

system allows tool to accesstighter spaces

• 360° head rotation increasesmaneuverability

• Easy to use; no dies required• Combine with other heads

in the RIDGID QuickChangeSystem to maximizeefficiency and productivityon the job site

SPECIFICATIONS• Crimps #8AWG to 750 kcmil (MCM) copper lugs and 500 kcmil (MCM) aluminum

cable or fine stranded wire• Interchangeable head is compatible with 6-ton RIDGID Electrical Tools featuring

the RIDGID QuickChange System• Approximate Crimp Time: 5 seconds• Weight: 5.8 lbs. (2.6 kgs)• Includes 4P-6 4PIN Dieless Crimp Head and instruction sheet; available as

standalone head or in a RE 6 Tool Kit.

The 4P-6 4PIN Dieless Crimp Head, compatible with the exclusive RIDGID® QuickChange System™, delivers unparalleled efficiency to contractors and electricians.

999-

997-

273.

10

RIDGID.COM

4P-6 4PIN™ DIELESS crImP hEaD

Featuring the RIDGID QuickChange System

Ordering infOrmatiOn CATAlOG

DESCRIPTIONwEIGhT

NO. (lb.) (kg)44343 RE 6 Electrical Tool Kit w/SC-60C Scissor Cutter, 4P-6 30.4 13.8

4PIN Dieless Crimp Head and PH-60B Punch Head* 44348 RE 6 Electrical Tool Kit w/SC-60C Scissor Cutter Head 26.8 12

4P-6 4PIN Dieless Crimp Head*46828 RE 6 Electrical Tool Kit w/4P-6 4PIN Dieless Crimp Head 22 1043518 RE Electrical Tool Kit (No Heads) 19 8.446818 RE 6 Electrical Tool Only 6.41 2.9146823 RE 6 Electrical Tool Case Only 9.45 4.343548 4P-6 4PIN Dieless Crimp Head Only 5.8 2.647763 PH-60B Knockout Punch Head Only 3.5 1.647918 SC-60C Cutter Head with Copper/Aluminum Wire Blades 4.75 2.1549408 SC-60C Cutter Head with ACSR Blades 4.75 2.1544693 18V Advanced Lithium 2 Battery 1.0 0.544698 18V Advanced Lithium 4 Battery 1.5 0.743458 Advanced Lithium Battery Charger 1.8 0.844798 Advanced Lithium Battery Charger Replacement Cord 0.3 0.1

Cut

Crimp Punch

* Includes SC-60C Scissor Cutter Head for Copper/Aluminum Wire.

All sales subject to Ridge Tool Company Terms and Conditions of Sales. Catalog Sheet No. R-13-K (914) Effective Date: October 1, 2014©2014, RIDGID, Inc. The Emerson logo and RIDGID logo are registered trademarks of Emerson Electric Co. or RIDGID, Inc. in the U.S. and other countries.

All other trademarks belong to their respective holders.

99 Washington Street Melrose, MA 02176 Phone 781-665-1400Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

RE 6 Electrical Tool, Attachments & Accessories

How the RIDGID® QuickChange System™ Works

1. Select the appropriateinterchangeable head for the job. 2. Pull back the collar and insert

the head until you hear a click confirming the connection.

3. Complete the job–cut, crimp orpunch. 4. Remove the head by pulling the

movable collar toward the base of the tool.

RE 6 Electrical Tool Cat. No. Description

43518 Cut wire, crimp lugs and punch boxes with just one tool via the patent-pending RIDGID® QuickChange System

PH-60B Knockout Punch Head

SC-60C Scissor Cutter Head Cat. No. Description

47918 Cuts up to 750 kcmil (MCM) copper and aluminum building wire and 500 kcmil (MCM) copper fine stranded wire

49408 Cuts up to 477 kcmil (MCM) ACSR

Knockout Punch Sets

Cat. No. Description

47763 Punches up to 3.5" holes in 12 gauge mild steel and 14 gauge stainless steel

Punches sold separately

Cat. No. Description

23487 KOPD-52 Set with 1/2", 3/4", 1", 11/4", 11/2", 2" Punches, Dies and Case

23492 KOPD-254 Set with 21/2", 3", 31/2", 4" Punches and Dies and Case

47178 PH-60B Spacers, Draw Bolts and Drill Bit Accessory Kit

49423 PH-60B Large Capacity Adapter

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com