eldoLED Lichtsteuerungen

© 2012 eldoLED. All rights reserved. V3.3 More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.

Datasheet POWERdrive 562/S, 562/A, 561/M AC Series

50W Full-Colour Dimmable LED DriverPOWERdrive 562 and 561 are constant current, DMX/RDM compatible LED drivers with three and four LED outputs respectively. Targeted at a wide range of full-colour, dynamic LED lighting applications, POWERdrive’s dynamic response can be tuned to fit any content - from exceptionally smooth fades in architecture to fast-paced video in entertainment. POWERdrive - Beyond Colour.

Applications

• Entertainment lighting• Stage lighting• Full-colour architectural lighting

• Signage / advertising lighting• Façade lighting• Retail display lighting

• Full-colour / tunable white applications• Decorative lighting

Features & benefits

Input• Voltage: 120 - 277 VAC• Current, max: 0.7A• Frequency: 50/60Hz

Output• Voltage: 55V typ• Current range: settable from 200mA to 1,050mA

for each LED output separately• Power: 50W max

General• Power factor: > 0.9 • DMX / RDM and LedSync compatible• Hybrid HydraDrive: efficient, smooth and flicker-free dimming • Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve• High efficiency over a wide power and voltage range:

89% at full load, ≥ 85% above 67% load• Maximum (rated) power available over wide LED voltage (30-55V) and

LED current range (200-1,050mA)• LEDcode/NTC interface for robust thermal management• Programmable with TOOLbox pro and FluxTool software via DMX/LedSync

Product offering

Description Product Order no.POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 60V LED outputs, square metal POWER 562/S PW0562S1POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 60V LED outputs, square metal/plastic POWER 562/A PW0562A1POWERdrive AC, 50W, DMX, 4 control channels, constant current, 4x 60V LED outputs, long metal POWER 561/M PW0561M1


Datasheet POWERdrive 45D, 90D, 180D DC Series

45/90/180 Watt Full-Colour Dimmable LED DriverPOWERdrive DC is a constant current LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power full-colour static or dynamic LED lighting. POWERdrive DC is DALI, DMX/RDM and LedSync compatible.

Applications




Features & benefits

Input• Voltage: 12 - 32 VDC• Current, max:

POWERdrive 45D: 2.2APOWERdrive 90D: 4.62APOWERdrive 180D: 6.16A

Output• Voltage: 11 - 31 VDC (Vsup - 1V)• Current range:

POWERdrive 45D configurable from 200 - 500mAPOWERdrive 90D configurable from 200 - 1,050mAPOWERdrive 180D configurable from 200 - 1,400mA

• Power: 45W, 90W, 180W max

General• DALI, USITT DMX512A / RDM (explore & address, ANSI E1.20) and LedSync compatible• HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1%, gamma-corrected curve• High efficiency • LED current configurable for each output separately • Intuitive 3-button user interface for on-the-fly configuration• Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software• NTC interface for robust thermal management

Product offering

Description Product Order no.POWERdrive DC, 45W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs POWER 45D PWR045D2POWERdrive DC, 90W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs POWER 90D PWR090D2POWERdrive DC, 180W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs POWER 180D PWR180D2

© 2012 eldoLED

. All rights reserved. V1.1 More product docum

entation and eldoLED

’s terms and conditions are available at w

ww

.eldoled.com.

Datasheet PO

WER

drive 6060/RA

C Series

600W 32-C

hannel Dim

mable LED

Driver

PO

WE

Rdrive 6060/R

is a 19” rackmount, rem

ote mounted constant current LE

D driver. Targeted at both dynam

ic full-colour and white lighting

applications, PO

WE

Rdrive 6060/R

supports various control protocols: it can be set up as one to four DA

LI ballasts for general white lighting or as

a 4-channel DM

X driver, offering 8x R

GBW

outputs. PO

WE

Rdrive’s dynam

ic response can be tuned to fit any use case - from exceptionally sm

ooth fades in architecture to fast-paced video in entertainm

ent. PO

WE

Rdrive - B

eyond Colour.

Applications

•E

ntertainment lighting

•Full-colour architectural lighting

•Façade lighting

•R

etail display lighting•

Full-colour / tunable white applications

•G

eneral white lighting

Features & benefits

Input•

Voltage per LED

output: 120 - 240 VAC

•C

urrent, max: 9A

at 120VAC

, 5A at 230V

•Frequency: 50/60H

z

Output

•Voltage: 5 - 48V

•C

urrent range: every LED

output isprogram

mable from

200mA to 1,050m

A

•P

ower: 600W

max

General

•P

ower factor: > 0.95

•U

SITT D

MX

512A / R

DM

(explore & address, A

NS

I E1.20) and LedS

ync compatible

•D

ALI com

patible (IEC

62386-101/102/207)•

Hybrid H

ydraDrive: efficient, sm

ooth and flicker-free dimm

ing •

Full dimm

ing control: 100% to 0%

, choice of dimm

ing curve type•

High efficiency over a w

ide power and voltage range: 84%

at full load•

Maxim

um (rated) pow

er available over wide LE

D voltage and LE

D current range (200-1,050m

A)

•N

TC interface for robust therm

al managem

ent per LED

output group•

Show

Master: 9 default show

s, up to 20 user-defined shows, uploadable w

ith TOO

Lbox and TOO

Lbox software

Product offering

Description

ProductO

rder no.P

OW

ER

drive AC

, 600W, D

MX

, DA

LI, 8x 4 control channels, constant current, 32x 55V LE

D outputs, m

etalP

OW

ER

6060/RP

W6060R

1


Datasheet POWERdrive 106/A, 106/S, 106/M AC Series

100W Full-Colour Dimmable LED DriverPOWERdrive AC is a constant current LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power full-colour static or dynamic LED lighting. POWERdrive AC is DALI, DMX/RDM and LedSync compatible.

Applications




Features & benefits

Input• Voltage: 120 - 277 VAC• Current, max:

1A at 120V/60Hz0.5A at 230V/50Hz0.45A at 277V/60Hz

• Frequency: 50/60Hz

Output• Voltage: 60V max, 57V typ• Current range: configurable from 200mA to 1,050mA• Power: 100W max

General• Power factor: > 0.94• DALI, DMX/RDM and LedSync compatible• Hybrid HydraDrive: 20-bit resolution • Dimming control: smooth dimming from 100% to 0%,

choice of linear or logarithmic dimming curve• High efficiency over a wide power and voltage range:

90% at full load, ≥ 87% above 50W output• Maximum (rated) power available over wide LED voltage (30-60V) and LED current range (200-1,050mA)• LED current configurable for each output separately• Intuitive 3-button user interface for on-the-fly configuration• Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch• LEDcode/NTC interface for robust thermal management• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

Product offering

Description Product Order no.POWERdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, long metal/plastic POWER 106/A PWR106A1POWERdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, square metal POWER 106/S PWR106S1POWERdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, long metal POWER 106/M PWR106M1

Stand 03-2013

LED SteuerungstechnikStrom und Spannung in Perfektion


Datasheet SOLOdrive 561/M, 561/S, 561/A AC Series

50W 0-10V Dimmable LED DriverSOLOdrive 561 is a 0-10V dimmable, constant current LED driver. Dimming is beautiful - smooth all the way down to 0. Its two LED outputs offer the possibility of driving a very high power 50W LED array connected to a single output, or driving two strings of 15 LEDs at 350mA. SOLOdrive is programmable to suit a wide application area and LEDcode allows easy extension of the SOLOdrive’s feature set with time, motion and bright-ness based intelligence.

Applications

• Office lighting• Next-generation ‘T5’ luminaires• Architectural lighting

• Hospitality lighting• Low Bay lighting• Signage / advertising lighting

• Retail lighting• Public area / park / street lighting• Display lighting

Features & benefitsInput• Voltage: 120-277VAC• Current, max: 0.7A• Frequency: 50/60Hz• 0-10V dimmer input

Output• Class 2 LED outputs (x2)• Voltage: 55V typ• Current range: settable from 200mA to 1,050mA for each LED output separately• Power: 50W max

General• Power factor: > 0.9 • 0-10V compatible (IEC 60929 Annex E). SOLOdrive 561 is a current source driver,

compatible with both current sink and current source controllers. For a list of compatible 0-10V dimmers, please visit www.eldoled.com/compatibilityNote that the driver’s 0-10V interface is not insulated from the LED outputs, meaning the insulation class (basic or double) of the dimmer will determine the final insulation class of the LED outputs. If the 0-10V dimming signal is only basic insulated, LED outputs are considered ELV (not SELV).

• Hybrid HydraDrive: efficient, smooth and flicker-free dimming• Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve• Highly efficient over a wide power and voltage range: 89% at full load, ≥ 85% above 67% load• Maximum (rated) power available over wide LED voltage (30-55V) and LED current range (200-1,050mA)• NTC interface for robust thermal management• LEDcode: programming interface (LED output current, NTC temperature, dimming curve, minimum dimming level)

and sensor/extended feature set interface

Product offering

Description Product Order no.SOLOdrive AC, 50W, 0-10V, 1 control channel, constant current, 2x 60V LED outputs, long metal SOLO 561/M SL0561M1SOLOdrive AC, 50W, 0-10V, 1 control channel, constant current, 2x 60V LED outputs, square metal SOLO 561/S SL0561S1SOLOdrive AC, 50W, 0-10V, 1 control channel, constant current, 2x 60V LED outputs, square metal/plastic SOLO 561/A SL0561A1


444 mm / 17.48”

29.9 mm1.18”

21 mm / 0.83”436 mm / 17.17”

ø 5.0 mm / 0.2”

SOLOLdrive 561/M

76 mm2.99”

66.4 mm2.61”

130 mm / 5.12”

118.8 mm / 4.68”

30 mm / 1.18”

ø 5 mm / 0.19”(M4/M5)

76 mm2.99”

66.4 mm2.61”

152.5 mm / 6.00”

118.8 mm / 4.68”

30.1 mm / 1.19”

ø 5 mm / 0.19”(M4/M5)

SOLOdrive 561/A


Dimensions, weight, packaging

SOLOdrive 561/M• Weight: 360 g, 12.7 oz• Packaging: 4, 10 or

40 pcs/carton

SOLOdrive 561/S• Weight: 350 g, 12.35 oz• Packaging: 6, 10 or 45 pcs/carton

SOLOdrive 561/A• Weight: 372 g, 13.12 oz• Packaging: 6, 10 or 45 pcs/carton

Connections

Connectors• LED outputs: + and - (x2)• LEDcode / NTC: + and - • 0-10V: + and - • Power: Line, Neutral and Ground

Wiring• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16 • Strip length: 9 mm / 0.35 in.

LEDcode configuration

• USB-LEDcode interface: TOOLbox pro (part number: TLU20502) • FluxTool software: for Mac and PC freely downloadable from www.eldoled.com/fluxtool

Other information

Certifications• CE• IEC 61347, IEC 62384, EN 55015, EN 55022,

IEC 61000-3-2, IEC 61547, IEC 60929 Annex E • UL: Recognized Component for US and Canada (file no. E333135),

according to UL1310 and UL8750. US: Class 2 output. Canada: Non-Class 2 output. (SOLOdrive 561/M pending)

Environmental ratings• Ta range: -20°C...+50°C / -4°F...+122°F• Tc max: 85°C / 185°F • For use in damp and dry locations

Control compatibility• Standard 0-10V wall mount dimmers and switch controls

Europe, Rest of World North AmericaeldoLED Europe bv eldoLED America, Inc.Luchthavenweg 18a 1762 Technology Drive #226NL-5657 EB Eindhoven San Jose, CA 95110The Netherlands USAT: +31 40 2054050 T: +1 408 451 9333F: +31 40 2054058 F: +1 408 451 9335

Sales support EU & Rest of World: [email protected] support US/Canada: [email protected]

Other documentation and supportVisit www.eldoled.com/ACsupport for further documentation such as quick start guide, wiring diagram, tech sheet and 3D IGES files.

WarrantyeldoLED represents and warrants that for a period of 3 (three) years, as of the date of invoice, Products materially meet the specifications and specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly designated by eldoLED as "warranted specifications". For the complete warranty text, visit www.eldoled.com/terms.



50W Dimmable DALI LED DriverSOLOdrive 560/S is a DALI compatible, constant current LED driver with two LED outputs that are controlled as a single ballast. Dimming is beautiful - smooth all the way down to 0. SOLOdrive is programmable to suit a wide application area. Its two LED outputs offer the possibility of driving a very high power 50W LED array connected to a single output, or driving two strings of 15 LEDs at 350mA. LEDcode allows easy extension of the SOLOdrive’s feature set with time, motion and brightness based intelligence.

Applications

• Office lighting• Next-generation ‘T5’ luminaires• Architectural lighting

• Hospitality lighting• Low Bay lighting• Signage / advertising lighting

• Retail lighting• Public area / park / street lighting• Display lighting

Features & benefits

Input• Voltage: 120 - 277 VAC• Current, max: 0.7A • Frequency: 50/60Hz

Output• Class 2 LED outputs (x2)• Voltage: 55V typ• Current range: settable from 200mA to 1,050mA for each LED output separately• Power: 50W max

General• Power factor: > 0.9 • DALI compatible (IEC 62386-101/102/207)• Hybrid HydraDrive: efficient, smooth and flicker-free dimming• Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve• Highly efficient over a wide power and voltage range: 89% at full load, ≥ 85% above 67% load• Maximum (rated) power available over wide LED voltage (30-55V) and LED current range

(200-1,050mA)• NTC interface for robust thermal management• LEDcode: programming interface (LED output current, NTC temperature, dimming curve,

minimum dimming level) and sensor/extended feature set interface

Product offering

Description Product Order no.SOLOdrive AC, 50W, DALI, 1 ballast, constant current, 2x 60V LED outputs, long metal SOLO 560/M SL0560M1SOLOdrive AC, 50W, DALI, 1 ballast, constant current, 2x 60V LED outputs, square metal SOLO 560/S SL0560S1SOLOdrive AC, 50W, DALI, 1 ballast, constant current, 2x 60V LED outputs, square metal/plastic SOLO 560/A SL0560A1


444 mm / 17.48”

29.9 mm1.18”

21 mm / 0.83”436 mm / 17.17”

ø 5.0 mm / 0.2”

SOLOLdrive 560/M

76 mm2.99”

66.4 mm2.61”

152.5 mm / 6.00”

118.8 mm / 4.68”

30.1 mm / 1.19”

ø 5 mm / 0.19”(M4/M5)

SOLOdrive 560/A

76 mm2.99”

66.4 mm2.61”

130 mm / 5.12”

118.8 mm / 4.68”

30 mm / 1.18”

ø 5 mm / 0.19”(M4/M5)



SOLOdrive 560/M• Weight: 360 g, 12.7 oz• Packaging: 4, 10 or

40 pcs/carton

SOLOdrive 560/S • Weight: 350 g, 12.35 oz• Packaging: 6, 10 or 45 pcs/carton

SOLOdrive 560/A• Weight: 372 g, 13.12 oz• Packaging: 6, 10 or 45 pcs/carton

Connections

Connectors• LED outputs: + and - (x2)• LEDcode / NTC: + and - • DALI: + and - (x2)• Power: Line, Neutral and Ground

Wiring• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16• Strip length: 9 mm / 0.35 in.



Other information

Certifications• CE• IEC 61347, IEC 62384, EN 55015, EN 55022,

IEC 61000-3-2, IEC 61547, IEC 62386-207 • UL: Recognized Component for US and Canada (file no. E333135),

according to UL1310 and UL8750. US: Class 2 output. Canada: Non-Class 2 output. (SOLOdrive 560/M pending)

• ENEC by VDE (SOLOdrive 560/M pending)


Control compatibility• DALI control gear






Datasheet SOLOdrive 106*/A, 106*/S, 106*/M AC Series

100W Dimmable LED DriverSOLOdrive AC is a constant current LED driver with multiple LED outputs that are controlled over a single channel. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power, general white LED lighting. SOLOdrive AC is available in a DALI and 0-10V compatible version.

Applications

• Office lighting• Architectural lighting• Hospitality lighting

• High and Low Bay lighting• Signage / advertising lighting• Retail lighting

• Public area / park / street lighting• Display lighting

Features & benefits





General• Power factor: > 0.94• DALI or 0-10V compatible• Hybrid HydraDrive: 20-bit resolution• Dimming control: smooth dimming from 100% to 0%,


90% at full load, ≥ 87% above 50W output• Maximum (rated) power available over wide LED voltage (30-60V) and LED current range (200-1,050mA)• Programmable NTC temperature, dimming curve, minimum dimming level and - per output - LED current

Product offering

Description Product Order no.SOLOdrive AC, 100W, DALI, 1 ballast, constant current, 4x 60V LED outputs, long metal/plastic SOLO 1060/A SL1060A1SOLOdrive AC, 100W, DALI, 1 ballast, constant current, 4x 60V LED outputs, square metal SOLO 1060/S SL1060S1SOLOdrive AC, 100W, DALI, 1 ballast, constant current, 4x 60V LED outputs, long metal SOLO 1060/M SL1060M1

SOLOdrive AC, 100W, 0-10V, 1 control channel, constant current, 4x 60V LED outputs, long metal/plastic SOLO 1061/A SL1061A1SOLOdrive AC, 100W, 0-10V, 1 control channel, constant current, 4x 60V LED outputs, square metal SOLO 1061/S SL1061S1SOLOdrive AC, 100W, 0-10V, 1 control channel, constant current, 4x 60V LED outputs, long metal SOLO 1061/M SL1061M1


388 mm / 15.27”

42 mm1.65”

354 mm / 13.94”

ø 5.0 mm / 0.2”

30 mm / 1.18”

230 mm / 9.06”

15 mm / 0.59”

50 mm / 1.97”

15 mm / 0.59”

219.5 mm / 8.64”

ø 5.0 mm / 0.2”

80 mm3.15”

30 mm / 1.18”

370 mm / 14.57”

361 mm / 14.21”

ø 5.0 mm / 0.2”

41 mm1.61”

30 mm / 1.18”

Datasheet SOLOdrive 106*/A, 106*/S, 106*/M AC Series


SOLOdrive 106*/A• Weight: 705 g, 26 oz• Packaging: 20 pcs/carton

SOLOdrive 106*/S• Weight: 880 g, 31 oz• Packaging: 20 pcs/carton

SOLOdrive 106*/M• Weight: 880 g, 31 oz• Packaging: 20 pcs/carton

Connections

Connectors• Power: Line, Neutral and Ground• DALI or 0-10V: + and - (x2)• LED outputs: 1 ballast: + and - (x4)• LEDcode / NTC: + and -


Other information

Certifications• IEC 61347-1, IEC 61347-2-13, IEC 62384 + A1, EN 55015 + A1,

EN 55022 + A1, IEC 61000-3-2, IEC 61547 + A1, IEC 62386-207• CE• ENEC by VDE• UL: Recognized Component for US and Canada (file no. E333135),

according to UL1310 and UL8750. US: Class 2 output. Canada: Non-Class 2 output.

Environmental ratings• Ta range: -40°C...+50°C / -40°F...+122°F• Tc max: 90°C / 194°F (106*/A), 85°C / 185°F (106*/M),

83°C / 181°F (106*/S)• For use in damp and dry locations

Control compatibility• DALI control gear• Standard 0-10V wall mount dimmers and switch controls






Datasheet DUALdrive 560/M, 560/S, 560/A AC Series

50W Dimmable DALI LED DriverDUALdrive 560 is about two separately controllable LED outputs - whether used in dual-head fixtures or dynamic white applications, DUALdrive offers DALI compatible, beautiful dimming all the way down to 0% brightness. DUALdrive, like all eldoLED AC series products, is programmable, has a wide application area and is ready for LEDcode-based feature extensions.

Applications

• Office lighting• Architectural lighting

• Signage and advertising lighting• Tunable white lighting

• Combined task / ambient lighting• Retail display lighting

Features & benefits


Output• Class 2 LED outputs (x2)• Voltage: 55V typ• Current range: settable from 200mA to 1,050mA


General• Power factor: > 0.9• DALI compatible (IEC 62386-101/102/207)• Hybrid HydraDrive: efficient, smooth and flicker-free dimming• Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve• Highly efficient over a wide power and voltage range: 89% at full load, ≥ 85% above 67% load• Maximum (rated) power available over wide LED voltage (30-55V) and LED current range

(200-1,050mA)• NTC interface for robust thermal management• LEDcode: programming interface (LED output current, NTC temperature, dimming curve, minimum dimming level)

and sensor/extended feature set interface

Product offering

Description Product Order no.DUALdrive AC, 50W, DALI, 2 ballasts, constant current, 2x 60V LED outputs, long metal DUAL 560/M DL0560M1DUALdrive AC, 50W, DALI, 2 ballasts, constant current, 2x 60V LED outputs, square metal DUAL 560/S DL0560S1DUALdrive AC, 50W, DALI, 2 ballasts, constant current, 2x 60V LED outputs, square metal/plastic DUAL 560/A DL0560A1


444 mm / 17.48”

29.9 mm1.18”

21 mm / 0.83”436 mm / 17.17”

ø 5.0 mm / 0.2”

DUALdrive 560/M

76 mm2.99”

66.4 mm2.61”

152.5 mm / 6.00”

118.8 mm / 4.68”

30.1 mm / 1.19”

ø 5 mm / 0.19”(M4/M5)

DUALdrive 560/A

76 mm2.99”

66.4 mm2.61”

130 mm / 5.12”

118.8 mm / 4.68”

30 mm / 1.18”

ø 5 mm / 0.19”(M4/M5)

Datasheet DUALdrive 560/M, 560/S, 560/A AC Series


DUALdrive 560/M• Weight: 360 g, 12.7 oz• Packaging: 4, 10 or

40 pcs/carton

DUALdrive 560/S• Weight: 350 g, 12.35 oz• Packaging: 6, 10 or 45 pcs/carton

DUALdrive 560/A• Weight: 372 g, 13.12 oz• Packaging: 6, 10 or 45 pcs/carton

Connections

Connectors• LED outputs: + and - (x2)• LEDcode / NTC: + and - • DALI: + and - (x2)• Power: Line, Neutral and Ground




Other information

Certifications• CE• IEC 61347, IEC 62384, EN 55015, EN 55022, IEC 61000-3-2,

IEC 61547, IEC 62386-101/102/207 • UL: Recognized Component for US and Canada (file no. E333135),

according to UL1310 and UL8750. US: Class 2 output. Canada: Non-Class 2 output. (DUALdrive 560/M pending)

• ENEC by VDE: pending


Control compatibility• DALI control gear






Datasheet DUALdrive 1060/A, 1060/S, 1060/M AC Series

100W Dimmable LED DriverDUALdrive AC is a constant current LED driver with multiple LED outputs that are controlled over two channels. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power general white LED lighting. Thanks to its two control channels, this driver is ideal for tunable white applications or luminaires that combine ambient and task lighting. DUALdrive AC is DALI and switch-dim compatible.

Applications

• Office lighting• Architectural lighting

• Signage and advertising lighting• Tunable white lighting

• Combined task / ambient lighting• Retail display lighting

Features & benefits





General• Power factor: > 0.94• DALI (2 ballasts) and switch-dim compatible• Hybrid HydraDrive: 20-bit resolution• Dimming control: smooth dimming from 100% to 0%,


90% at full load, ≥ 87% above 50W output• Maximum (rated) power available over wide LED voltage (30-60V) and LED current range (200-1,050mA)• Programmable NTC temperature, dimming curve, minimum dimming level and - per output - LED current

Product offering

Description Product Order no.DUALdrive AC, 100W, DALI, 2 ballasts, constant current, 4x 60V LED outputs, long metal/plastic DUAL 1060/A DL1060A1DUALdrive AC, 100W, DALI, 2 ballasts, constant current, 4x 60V LED outputs, square metal DUAL 1060/S DL1060S1DUALdrive AC, 100W, DALI, 2 ballasts, constant current, 4x 60V LED outputs, long metal DUAL 1060/M DL1060M1


388 mm / 15.27”

42 mm1.65”

354 mm / 13.94”

ø 5.0 mm / 0.2”

30 mm / 1.18”

230 mm / 9.06”

80 mm3.15”

15 mm / 0.59”

50 mm / 1.97”

15 mm / 0.59”

219.5 mm / 8.64”

ø 5.0 mm / 0.2”30 mm / 1.18”

370 mm / 14.57”

41 mm1.61”

30 mm / 1.18”361 mm / 14.21”

ø 5.0 mm / 0.2”

Datasheet DUALdrive 1060/A, 1060/S, 1060/M AC Series


DUALdrive 1060/A• Weight: 705 g, 26 oz• Packaging: 20 pcs/carton

DUALdrive 1060/S• Weight: 880 g, 31 oz• Packaging: 20 pcs/carton

DUALdrive 1060/M• Weight: 880 g, 31 oz• Packaging: 20 pcs/carton

Connections

Connectors• Power: Line, Neutral and Ground• DALI: + and - (x2)• LED outputs: ballast 1: + and - (x2)

ballast 2: + and - (x2)• LEDcode/NTC: + and -


Other information




Environmental ratings• Ta range: -40°C...50°C / -40°F...122°F• Tc max: 90°C / 194°F (1060/A), 85°C / 185°F (1060/M),

83°C / 181°F (1060/S)• For use in damp and dry locations

Control compatibility• DALI control gear• Momentary light switches for switch-dim functionality







45/90/180 Watt Full-Colour Dimmable LED DriverPOWERdrive DC is a constant current LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power full-colour static or dynamic LED lighting. POWERdrive DC is DALI, DMX/RDM and LedSync compatible.

Applications




Features & benefits


POWERdrive 45D: 2.2APOWERdrive 90D: 4.62APOWERdrive 180D: 6.16A

Output• Voltage: 11 - 31 VDC (Vsup - 1V)• Current range:

POWERdrive 45D configurable from 200 - 500mAPOWERdrive 90D configurable from 200 - 1,050mAPOWERdrive 180D configurable from 200 - 1,400mA


General• DALI, USITT DMX512A / RDM (explore & address, ANSI E1.20) and LedSync compatible• HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1%, gamma-corrected curve• High efficiency • LED current configurable for each output separately • Intuitive 3-button user interface for on-the-fly configuration• Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software• NTC interface for robust thermal management

Product offering

Description Product Order no.POWERdrive DC, 45W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs POWER 45D PWR045D2POWERdrive DC, 90W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs POWER 90D PWR090D2POWERdrive DC, 180W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs POWER 180D PWR180D2


M

ø 4.2 mm / 0.17”

23 mm / 0.91”

50 mm / 1.97”

10 mm / 0.39”

10 mm / 0.39”

30 mm / 1.18”

21.5 mm / 0.85”150 mm / 5.90”

193 mm / 7.60”

12-32V / 180W Constant current LED driver

Ext i

n +

Max | Vdc+

32V | Vdc-

Ext i

n

DMX in +DMX in -

LedSync out +LedSync out -LedSync shield

DMX in shield

TC

1+

2

Group

Group

NTC

NTC

POWERdrive 180D

-

DA +DA -

DA -DA +

Group

+

2Group -

3Group +

3Group -

4Group +

4Group -



• Weight: 191 g, 6.7 oz • Packaging: 12 pcs/carton

Connections

Connectors• VDC: + and - • DALI: + and - (x2)• DMX in: +, - and shield• LedSync out: +, - and shield• Ext in: + and -

Connectors (cont’d)• LED outputs: + and - (x4)• NTC: + and -


Other information

Certifications• CE• IEC 61347, EN 55015, IEC 61003, EN 61547 • UL: UL Recognized Component (file no. E333135).

POWERdrive 40D and 90D are Class 2 output.

Accessories• LEC4 LED engine with CREE® MC-E Color• LEW4 LED engine with CREE® MC-E White

Environmental ratings• Ta range: -20°C...50°C / -4°F...122°F• Tc max: 65°C / 149°F• For use in dry locations

Control compatibility• DALI control gear • DMX512A and RDM explore & address (ANSI E1.20) control gear• Standard 0-10V switch controls



Other documentation and supportVisit www.eldoled.com/support for further documentation such as quick start guide, wiring diagram, tech sheet and 3D IGES files.




50W Full-Colour Dimmable LED DriverPOWERdrive 562 and 561 are constant current, DMX/RDM compatible LED drivers with three and four LED outputs respectively. Targeted at a wide range of full-colour, dynamic LED lighting applications, POWERdrive’s dynamic response can be tuned to fit any content - from exceptionally smooth fades in architecture to fast-paced video in entertainment. POWERdrive - Beyond Colour.

Applications




Features & benefits


Output• Voltage: 55V typ• Current range: settable from 200mA to 1,050mA


General• Power factor: > 0.9 • DMX / RDM and LedSync compatible• Hybrid HydraDrive: efficient, smooth and flicker-free dimming • Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve• High efficiency over a wide power and voltage range:

89% at full load, ≥ 85% above 67% load• Maximum (rated) power available over wide LED voltage (30-55V) and

LED current range (200-1,050mA)• LEDcode/NTC interface for robust thermal management• Programmable with TOOLbox pro and FluxTool software via DMX/LedSync

Product offering

Description Product Order no.POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 60V LED outputs, square metal POWER 562/S PW0562S1POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 60V LED outputs, square metal/plastic POWER 562/A PW0562A1POWERdrive AC, 50W, DMX, 4 control channels, constant current, 4x 60V LED outputs, long metal POWER 561/M PW0561M1


444 mm / 17.48”

29.9 mm1.18”

21 mm / 0.83”436 mm / 17.17”

ø 5.0 mm / 0.2”

POWERdrive 561/M



POWERdrive 561/M• Weight: 360 g, 12.7 oz• Packaging: 4, 10 or

40 pcs/carton

POWERdrive 562/S• Weight: 350 g, 12.35 oz• Packaging: 6, 10 or 45 pcs/carton

POWERdrive 562/A• Weight: 372 g, 13.12 oz• Packaging: 6, 10 or 45 pcs/carton

Connections

Connectors• LED outputs: + and - (562: x3 and 561: x4)• LEDcode/NTC: + and -• DMX in: +, - and shield• Power: Line, Neutral and Ground


DMX/LedSync configuration

• FluxTool software: for Mac and PC, freely downloadable from www.eldoled.com/fluxtool

• USB-DMX interface: TOOLbox pro (part number: TLU20502)

Other information

Certifications• CE• IEC 61347, IEC 62384, EN 55015,

EN 55022, IEC 61000-3-2, IEC 61547 • UL: pending• ENEC by VDE (pending for 561/M)

Environmental ratings• Ta range: -20°C...+50°C / -4°F...+122°F• Tc max: 85°C / 185°F• For use in damp and dry locations

Control compatibility• DMX512A and RDM explore & address (ANSI E1.20) control gear

Europe, Rest of World North AmericaeldoLED Europe bv eldoLED America, Inc.Luchthavenweg 18a 1762 Technology Drive #226NL-5657 EB Eindhoven San Jose, CA 95110The Netherlands USAT: +31 40 2054050 T: +1 408 451-9333F: +31 40 2054058 F: +1 408 451-9335




76 mm2.99”

66.4 mm2.61”

130 mm / 5.12”

118.8 mm / 4.68”

30 mm / 1.18”

ø 5 mm / 0.19”(M4/M5)

76 mm2.99”

66.4 mm2.61”

152.5 mm / 6.00”

118.8 mm / 4.68”

30.1 mm / 1.19”

ø 5 mm / 0.19”(M4/M5)

POWERdrive 562/A



100W Full-Colour Dimmable LED DriverPOWERdrive AC is a constant current LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power full-colour static or dynamic LED lighting. POWERdrive AC is DALI, DMX/RDM and LedSync compatible.

Applications




Features & benefits





General• Power factor: > 0.94• DALI, DMX/RDM and LedSync compatible• Hybrid HydraDrive: 20-bit resolution • Dimming control: smooth dimming from 100% to 0%,


90% at full load, ≥ 87% above 50W output• Maximum (rated) power available over wide LED voltage (30-60V) and LED current range (200-1,050mA)• LED current configurable for each output separately• Intuitive 3-button user interface for on-the-fly configuration• Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch• LEDcode/NTC interface for robust thermal management• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

Product offering

Description Product Order no.POWERdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, long metal/plastic POWER 106/A PWR106A1POWERdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, square metal POWER 106/S PWR106S1POWERdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, long metal POWER 106/M PWR106M1


M

388 mm / 15.27”

LedS

ync

DM

X

42 mm1.65”

354 mm / 13.94”

ø 5.0 mm / 0.2”

30 mm / 1.18”

370 mm / 14.57”

M

361 mm / 14.21”

ø 5.0 mm / 0.2”

41 mm1.61”

30 mm / 1.18”

M

230 mm / 9.06”

15 mm / 0.59”

50 mm / 1.97”

15 mm / 0.59”

219.5 mm / 8.64”

ø 5.0 mm / 0.2”

80 mm3.15”

30 mm / 1.18”



POWERdrive 106/A• Weight: 705 g, 26 oz• Packaging: 20 pcs/carton

POWERdrive 106/S• Weight: 880 g, 31 oz• Packaging: 20 pcs/carton

POWERdrive 106/M• Weight: 880 g, 31 oz• Packaging: 20 pcs/carton

Connections

Connectors• Power: Line, Neutral and Ground• DALI: + and - (x2)• DMX in: +, - and shield• LedSync out: +, - and shield• Ext in: + and -

Connectors (cont’d)• LED outputs: + and - (x4)• LEDcode/NTC: + and -


Other information




Environmental ratings• Ta range: -40°C...50°C / -40°F...122°F• Tc max: 90°C / 194°F (106/A), 85°C / 185°F (106/M),

83°C / 181°F (106/S)• For use in damp and dry locations

Control compatibility• DALI control gear• DMX512A and RDM explore & address (ANSI E1.20) control gear• Standard 0-10V switch controls






Datasheet POWERdrive 6060/R AC Series

600W 32-Channel Dimmable LED DriverPOWERdrive 6060/R is a 19” rackmount, remote mounted constant current LED driver. Targeted at both dynamic full-colour and white lighting applications, POWERdrive 6060/R supports various control protocols: it can be set up as one to four DALI ballasts for general white lighting or as a 4-channel DMX driver, offering 8x RGBW outputs. POWERdrive’s dynamic response can be tuned to fit any use case - from exceptionally smooth fades in architecture to fast-paced video in entertainment. POWERdrive - Beyond Colour.

Applications

• Entertainment lighting• Full-colour architectural lighting

• Façade lighting• Retail display lighting

• Full-colour / tunable white applications• General white lighting

Features & benefits

Input• Voltage per LED output: 120 - 240 VAC• Current, max: 9A at 120VAC, 5A at 230V• Frequency: 50/60Hz

Output• Voltage: 5 - 48V• Current range: every LED output is

programmable from 200mA to 1,050mA • Power: 600W max

General• Power factor: > 0.95 • USITT DMX512A / RDM (explore & address, ANSI E1.20) and LedSync compatible• DALI compatible (IEC 62386-101/102/207)• Hybrid HydraDrive: efficient, smooth and flicker-free dimming • Full dimming control: 100% to 0%, choice of dimming curve type• High efficiency over a wide power and voltage range: 84% at full load• Maximum (rated) power available over wide LED voltage and LED current range (200-1,050mA)• NTC interface for robust thermal management per LED output group• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable with TOOLbox and TOOLbox software

Product offering

Description Product Order no.POWERdrive AC, 600W, DMX, DALI, 8x 4 control channels, constant current, 32x 55V LED outputs, metal POWER 6060/R PW6060R1


Datasheet POWERdrive 6060/R AC Series


POWERdrive 6060/R• Weight: 6.1 kg,

13 lb, 7.2 oz• Packaging: 1 pc

Connections

Connectors• LED outputs: 32 outputs (+ and -): e.g. 8x RGBW• NTC: + and - per 4 LED groups (8x)• DMX in: +, - and shield (RJ45)• LedSync out: +, - and shield (RJ45)• LedSync thru: +, - and shield (RJ45)• DALI: + and -

Connectors cont’d• 0-10V: • Power: Line, Neutral and Ground

LED wiring• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16• Strip length: 9 mm / 0.35 in. • Max length: 100m / 328ft


• FluxTool software: for Mac and PC, freely downloadable from www.eldoled.com/fluxtool

• USB-LEDcode interface: TOOLbox pro (part number: TLU20502)

Other information

Certifications• CE• IEC 61347, IEC 62384, EN 55015,

EN 55022, IEC 61000-3-2, IEC 61547 IEC 62386-101/102/207

Environmental ratings• Ta range: -20°C...40°C / -4°F...104°F• Tc max: 85°C / 185°F• For use in damp and dry locations

Control compatibility• DMX512A and RDM explore & address (ANSI E1.20) control gear• DALI control gear

Europe, Rest of World North AmericaeldoLED Europe bv eldoLED America, Inc.Luchthavenweg 18a 1762 Technology Drive #226NL-5657 EB Eindhoven San Jose, CA 95110The Netherlands USAT: +31 40 2054050 T: +1 408 451-9333F: +31 40 2054058 F: +1 408 451-9335




482.6 mm / 19.00”

44.5 mm1.75”

Depth:329mm / 12.95”

30.0 mm1.18”

428 mm / 16.85”

ø 5.0 mm / 0.2”


Datasheet ECOdrive 15D, 30D, 45D DC Series

15/30/45 Watt Full-Colour Dimmable LED DriverECOdrive DC is a constant current LED driver that runs multiple LED outputs over a single, high-precision current source, resulting in a high effi-ciency. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power, full-colour static or dynamic LED lighting. ECOdrive DC is DMX and LedSync compatible.

Applications




Features & benefits


ECOdrive 15D: 0.55AECOdrive 30D: 1.16AECOdrive 45D: 1.54A

Output• Voltage: 11 - 31 VDC (Vf LEDs < Vsup - 1V)• Current range:

ECOdrive 15D configurable from 200 - 500mAECOdrive 30D configurable from 200 - 1,050mAECOdrive 45D configurable from 200 - 1,400mA


General• USITT DMX512A and LedSync compatible• HydraDrive: 15-bit resolution• Dimming control: smooth dimming from 100% to 0.1%, gamma-corrected curve• High efficiency of up to 95% due to ‘multiple group - single current source’ technology• Intuitive 3-button user interface for on-the-fly configuration• Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software • NTC interface for robust thermal management (ECOdrive 30D and 45D)

Product offering

Description Product Order no.ECOdrive DC, 15W, DMX/0-10V, 4 control channels, constant current, 4x LED outputs ECO 15D ECO015D1ECOdrive DC, 30W, DMX/0-10V, 4 control channels, constant current, 4x LED outputs ECO 15D ECO030D1ECOdrive DC, 45W, DMX/0-10V, 4 control channels, constant current, 4x LED outputs ECO 15D ECO045D1


M

ø 4.2 mm / 0.17”

23 mm / 0.91”

50 mm / 1.97”

10 mm / 0.39”

10 mm / 0.39”

30 mm / 1.18”

21.5 mm / 0.85”110 mm / 4.33”

153 mm / 6.02”

12-32V / 45W Constant current LED driver

Ext i

n +

Ext i

n

DMX in +

DMX in -

LedSync thru +

LedSync thru -

LedSync shield

DMX in shield

TC

ECOdrive 45D

-

1

2

3

4

Group

Group

Group

Group

NTC +

NTC -

Datasheet ECOdrive 15D, 30D, 45D DC Series


• Weight 15D: 128.5 g, 4.5 oz Weight 30D: 128.5 g, 4.5 ozWeight 45D: 140 g, 4.9 oz

• Packaging: 12 pcs/carton

Connections

Connectors• VDC: + and - • DMX in: +, - and shield• LedSync thru: +, - and shield• Ext in: + and - • LED outputs: 4 outputs with common +• NTC: + and - (only on ECOdrive 30D and 45D)


Other information

Certifications• CE• IEC 61347, EN 55015, IEC 61003, EN 61547 • UL: UL Recognized Component, Class 2 output (file no. E333135).

Accessories• Starboard LED engine:

CREE® MC-E Color (RGBW with warm or neutral white)CREE® MC-E White (4x neutral white or 4x warm white)


Control compatibility• USITT DMX512A control gear• Standard 0-10V switch controls






Datasheet LINEARdrive 100D, 180D, 720D DC Series

4/6/24A Full-Colour Dimmable LED DriverLINEARdrive DC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, low-power full-colour static or dynamic LED lighting. LINEARdrive DC is DALI, DMX/RDM and LedSync compatible.

Applications


• Signage / advertising lighting• Cove lighting

• Decorative lighting• Dynamic colour panel lighting

Features & benefits

Input• Voltage: 12 - 28 VDC for LINEARdrive 100D/180D/720D1

12 - 48 VDC for LINEARdrive 720D2• Current, max:

LINEARdrive 100D: 4A at 24V, 6A at 12VLINEARdrive 180D: 6A, irrespective of PSU voltageLINEARdrive 720D: 24A, irrespective of PSU voltage

Output• Voltage: 5V, 12V, 24V or 48V (5V and 48V: LINEARdrive 720D2 only)• Max load per output:

General• DALI (LINEARdrive 720D only), USITT DMX512A / RDM (ANSI E1.20) and LedSync compatible• HydraDrive: 15-bit resolution• Dimming control: smooth dimming from 100% to 0.1%, gamma-corrected curve• Intuitive 3-button user interface for on-the-fly configuration• Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

RGBW @ 12V RGB @ 12V RGBW @ 24V RGB @ 24V RGBW @ 48V RGB @ 48V

LINEARdrive 100D 1.5A 2A 1A 1.3A n.a. n.a.LINEARdrive 180D 1.5A 2A 1.5A 2A n.a. n.a.LINEARdrive 720D1 6A 6A 6A 6A n.a. n.a.LINEARdrive 720D2 6A 6A 6A 6A 6A 6A

Product offering

Description Product Order no.LINEARdrive DC, 100W, DMX/0-10V, 4 control channels, constant voltage, 4x LED outputs LINEAR 100D LIN100D2LINEARdrive DC, 180W, DMX/0-10V, 4 control channels, constant voltage, 4x LED outputs LINEAR 180D LIN180D2LINEARdrive DC, 720W, 48V, DMX/DALI/0-10V, 4 control channels, constant voltage, 4x LED outputs LINEAR 720D LIN720D2


M

ø 4.2 mm / 0.17”

23 mm / 0.91”

50 mm / 1.97”

10 mm / 0.39”

10 mm / 0.39”

30 mm / 1.18”

21.5 mm / 0.85”110 mm / 4.33”

153 mm / 6.02”

LINEARdrive 720D12-28V / 24A Direct voltage controlled LED driver

TC

Group 1Group 1 GND

Group 2

Group 2 GND

Group 3

Group 3 GND

Group 4

Group 4 GND

Ext

in +

Ext

in -

DMX in +DMX in -DMX in shieldLedSync out +LedSync out -LedSync shield

DA -DA +DA -DA +

M

ø 4.2 mm / 0.17”

23 mm / 0.91”

50 mm / 1.97”

10 mm / 0.39”

10 mm / 0.39”

30 mm / 1.18”

21.5 mm / 0.85”110 mm / 4.33”

153 mm / 6.02”

Ext

in +

Ext

in

DMX in +

DMX in -

DMX in shield

LedSync thru +

LedSync thru -

LedSync shield

1

2

3

Group

Group

Group

Group

LED supply +

LINEARdrive 180D4

12-28V / 6A Direct voltage controlled LED driver

TC

Datasheet LINEARdrive 100D, 180D, 720D DC Series


LINEARdrive 100D/180D• Weight: 120 g, 4.2 oz • Packaging: 12 pcs/carton

LINEARdrive 720D• Weight: 144 g, 5.0 oz • Packaging: 12 pcs/carton

Connections

Connectors LINEARdrive 100D/180D• VDC: + and - • DMX in: +, - and shield• LedSync thru: +, - and shield• Ext in: + and - • LED outputs: 4 outputs with common +


Connectors LINEARdrive 720D• VDC: + and - • DMX in: +, - and shield• LedSync out: +, - and shield• DALI: + and - (x2)• Ext in: + and - • LED outputs: + and - (x4)

Other information

Certifications• CE• IEC 61347, EN 55015, IEC 61003, EN 61547 • UL: UL Recognized Component (file no. E333135)

LINEARdrive 100D is Class 2 output.


Control compatibility• DALI control gear (LINEARdrive 720D)• DMX512A and RDM explore & address (ANSI E1.20) control gear• Standard 0-10V switch controls






Datasheet LINEARdrive 100/A, 100/S, 100/M AC Series

8A Full-Colour Dimmable LED DriverLINEARdrive AC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, low-power full-colour static or dynamic LED lighting. LINEARdrive AC is DALI, DMX/RDM, LedSync, and 0-10V compatible.

Applications




Features & benefits




Output• Load per output:

RGBW @ 12V: 2.08A per outputRGBW @ 24V: 1A per outputRGB @ 12V: 2.76A per outputRGB @ 24V: 1.33A per output

• Power: 100W max• Current: 2.8A max per output

General• Power factor: > 0.94• DALI, DMX/RDM, LedSync and 0-10V compatible• Hybrid HydraDrive: 15-bit resolution• Dimming control: smooth dimming from 100% to 0.1%, gamma-corrected curve• Intuitive 3-button user interface for on-the-fly configuration• DIP switch for 12V or 24V operation• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

Product offering

Description Product Order no.LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, long metal/plastic LINEAR 100/A LIN100A1LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, square metal LINEAR 100/S LIN100S1LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, long metal LINEAR 100/M LIN100M1

LINEARdrive AC - long metal/plastic - LINEAR 100/A

LINEARdrive AC - square metal - LINEAR 100/S

LINEARdrive AC - long metal - LINEAR 100/M




LINEARdrive 100/AWeight: 705g, 26 ounce

Packaging: 20pcs/carton

LINEARdrive 100/SWeight: 880g, 31 ounce


LINEARdrive 100/MWeight: 880g, 31 ounce


Connections


Connectors (cont’d)• LED outputs: 4 outputs with common +• LEDcode/NTC: + and -


Other information



according to UL1310 and UL8750. Class 2 output for US and Canada.

Environmental ratings• Ta range: -20°C...50°C / -4°F...122°F• Tc max: 90°C / 194°F (100/A) and 85°C / 185°F (100/M and 100/S)• For use in dry locations

Control compatibility• DALI control gear • DMX512A and RDM explore & address (ANSI E1.20) control gear• Standard passive 0-10V switch controls

Europe, Rest of World North AmericaeldoLED Europe bv eldoLED America, Inc.Luchthavenweg 18a 1762 Technology Drive #226NL-5657 EB Eindhoven San Jose, CA 95110The Netherlands USAT: +31 40 2054050 T: +1 408 451-9333F: +31 40 2054058 F: +1 408 451-9335E: [email protected]

Sales support US/Canada: [email protected] support Rest of the World: [email protected]



M

388 mm / 15.27”

42 mm1.65”

354 mm / 13.94”

ø 5.0 mm / 0.2”

30 mm / 1.18”

M

230 mm / 9.06”

15 mm / 0.59”

50 mm / 1.97”

15 mm / 0.59”

219.5 mm / 8.64”

ø 5.0 mm / 0.2”

80 mm3.15”

30 mm / 1.18”

M

370 mm / 14.57”

361 mm / 14.21”

ø 5.0 mm / 0.2”

41 mm1.61”

30 mm / 1.18”



4x2A Full-Colour Dimmable LED DriverLINEARdrive AC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, low-power full-colour static or dynamic LED lighting. LINEARdrive AC is DALI, DMX/RDM and LedSync compatible.

Applications




Features & benefits




Output• Voltage: 12VDC or 24VDC, selectable via DIP switch• Current: 2.8A absolute max rating per output• Power: 100W max• 4 LED outputs and 1 common anode

For a description of various use cases at different output voltages and loads, refer to the driver’s tech sheet.

General• Power factor: > 0.94• DALI, DMX/RDM and LedSync compatible• Hybrid HydraDrive: 15-bit resolution• Dimming control: smooth dimming from 100% to 0%, choice of linear or logarithmic dimming curve• Intuitive 3-button user interface for on-the-fly configuration• Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch• DIP switch for 12V or 24V operation• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

Product offering

Description Product Order no.LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, long metal/plastic LINEAR 100/A LIN100A1LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, square metal LINEAR 100/S LIN100S1LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, long metal LINEAR 100/M LIN100M1


M

388 mm / 15.27”

42 mm1.65”

354 mm / 13.94”

ø 5.0 mm / 0.2”

30 mm / 1.18”

M

230 mm / 9.06”

15 mm / 0.59”

50 mm / 1.97”

15 mm / 0.59”

219.5 mm / 8.64”

ø 5.0 mm / 0.2”

80 mm3.15”

30 mm / 1.18”

M

370 mm / 14.57”

361 mm / 14.21”

ø 5.0 mm / 0.2”

41 mm1.61”

30 mm / 1.18”



LINEARdrive 100/A• Weight: 705 g, 26 oz• Packaging: 20 pcs/carton

LINEARdrive 100/S• Weight: 880 g, 31oz• Packaging: 20 pcs/carton

LINEARdrive 100/M• Weight: 880 g, 31 oz• Packaging: 20 pcs/carton

Connections


Connectors (cont’d)• LED outputs: 4 outputs with common +• LEDcode/NTC: + and -


Other information



according to UL1310 and UL8750. Class 2 output for US and Canada.

Environmental ratings• Ta range: -40°C...50°C / -40°F...122°F• Tc max: 90°C / 194°F (100/A) and 85°C / 185°F (100/M and 100/S)• For use in damp and dry locations

Control compatibility• DALI control gear • DMX512A and RDM explore & address (ANSI E1.20) control gear• Standard passive 0-10V switch controls






Datasheet LINEARdrive 2**D DC Series

8A Dimmable Constant Voltage LED DriverLINEARdrive 2**D is an 8A constant voltage LED driver with two LED outputs that are controlled over one or two channels. Targeted at larger (up to 8A), smoothly dimmable linear LED applications as in accent and cove lighting. Available in DMX/RDM and DALI compatible versions.

Applications

• Accent and cove lighting• Office lighting• Architectural lighting

• Hospitality lighting• Signage / advertising lighting• Retail lighting


Features & benefits

Input• Voltage: 12 - 28 VDC• Current, max: 8A, irrespective of PSU voltage

Output• Voltage: 12V - 28V• Max load per output: 8A• Total max load: 8A

General• DALI compatible: LINEARdrive 210D and 220D• USITT DMX512A / RDM (ANSI E1.20) and LedSync compatible: LINEARdrive 212D and 222D• HydraDrive: 15-bit resolution• Dimming control: smooth dimming from 100% to 0.1% • LEDcode: sensor / extended feature set interface• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and ShowMaster DMX software

(DMX compatible version only)

Product offering

Description Product Order no.LINEARdrive DC, 8A, 12-24VDC, DALI, 1 ballast, constant voltage LINEAR 210D LIN210D1LINEARdrive DC, 8A, 12-24VDC, DMX, 1 control channel, constant voltage LINEAR 212D LIN212D1LINEARdrive DC, 8A, 12-24VDC, DALI, 2 ballasts, constant voltage LINEAR 220D LIN220D1LINEARdrive DC, 8A, 12-24VDC, DMX, 2 control channels, constant voltage LINEAR 222D LIN222D1


ø 4.2 mm / 0.17”

23 mm / 0.91”

50 mm / 1.97”

10 mm / 0.39”

10 mm / 0.39”

30 mm / 1.18”

21.5 mm / 0.85”110 mm / 4.33”

153 mm / 6.02”

TC

LINEARdrive 220D

Datasheet LINEARdrive 2**D DC Series


• Weight: 120 g, 4.2 oz • Packaging: 12pcs / carton

Connections

Connectors LINEARdrive 2*2D• VDC: + and - • AUX VDC: +• Ext in: + and - • DMX in: +, - and shield• LedSync thru: +, - and shield• LED outputs: LED supply + and Group - (x2)

Connectors LINEARdrive 2*0D• VDC: + and - • AUX VDC: +• Ext in: + and -

Connectors LINEARdrive 2*0D (cont’d)• DALI: + and - (x2)• LED outputs: LED supply + and Group - (x2)

Wiring for LED group connectors• Cross section: 0.2 - 1.5 mm2, AWG 24 - 16• Strip length: 9 mm / 0.35 in.

Wiring for other connectors• Cross section: 0.2 - 0.5 mm2, AWG 24 - 20 (LINEARdrive 2*2D)

0.2 - 1.5 mm2, AWG 24 - 16 (LINEARdrive 2*0D)• Strip length: 9 mm / 0.35 in.

Other information

Certifications• CE• IEC 61347, EN 55015, IEC 61003, EN 61547 • IEC 60929 Annex E, IEC 62386-101/102/207 (LINEARdrive 210D

and 220D)


Control compatibility• DALI control gear• DMX512A and RDM explore & address (ANSI E1.20) control gear





© 2009 eldoLED. All rights reserved.For more information, visit www.eldoled.com

Datasheet V-Strip Power V Series

32A Voltage Controlled RGB(W) LED Driver/Controller

V SeriesThe V Series products are cost-effective driver/controllers for direct voltage controlled linear LED lighting applications.

The V Series driver/controllers can be used in a network or as standalone devices. ShowMaster, supported on all eldoLED driver/controllers, allows you to upload show sequences for use in standalone mode. Create and manage your own show sequences using the TOOLbox and freely available PC soft-ware.

The V Series driver/controllers are DMX- and LedSync-com-patible, allowing 15-bit dimming and colour control and bidirec-tional communication for driver configuration and temperature read-out.

V-Strip PowerThe V-Strip Power is the ideal choice for powering all kinds of low-brightness LED packages requiring up to 32A (8A per channel) and is available in a 4-channel version.

Thanks to LedSync Out, the V-Strip Power allows daisy-chain-ing of linear SSL fixtures and can broadcast running show se-quences to all connected V Series devices.

Example of an LED group wiring schematic

Small form factorThe V-Strip Power has asmall footprint:68 mm x 50mm x 14mm or 2.68” x 1.97” x 0.55”.

High control resolutionThe V-Strip Power supports a 15-bit control resolution per output channel for accurate dimming and fine colour mixing.

Low EMISlew-rate controlled dimming and shielded conductors keep the driver’s EMI emissions at a very low level.

Features• USITT DMX512A- and LedSync-compatible• Small form factor: 68mm x 50mm / 2.68” x 1.97”• Operating supply voltage range: 12V - 28V DC• Delivers up to 32A (8A per channel) • High control resolution: 15-bit• DIN Rail (EN50022) mounting set available (optional)

Advantages• Highly integrated: no external boxes• Accurate, smooth dimming and high-res colour mixing• Drive and control per fixture • Easy network setup• Low EMI• Screw terminals allowing easy connection of leads

eldoLED Europe B.V. Luchthavenweg 18a 5657 EB Eindhoven The Netherlands T +31 40 2054050 F +31 40 2054058 [email protected] America, Inc. 1762 Technology Drive # 22 San Jose, CA95110 USA T +1 408 451 9333 F +1 408 451 9335 [email protected]

Datasheet V-Strip Power V Series

Electrical data• Delivers up to 32A (8A per channel)• Power output: 0 - 800W• Operating supply voltage range:

12V-28V DC• Reverse polarity protection• Processor: eldoLED FluxLogic 800

Series• Independent LED groups: 4

Dynamic effects• Hydra Drive Algorithm Based Modula-

tion• Control of channel 1 (R), 2 (G), 3 (B)

and 4 (W/A): 0 - 100% in 15-bit set point resolution

• Contrast ratio: up to 2,000:1

Thermal data• Passive cooling• Built-in protection against overheating

Network control• Network input: USITT DMX512A or

LedSync• Network output: LedSync• Network input/output: based on RS485

specification• Input signal update rate: 8ms

Network control (continued)• Network resolution: 8 or 16 bit, set at

factory or with TOOLbox and PC soft-ware

• Network channels used by driver in 8-bit resolution: 4

• Network channels used by driver in 16-bit resolution: 8

• Communication: bidirectional for driver configuration and temperature readout

• Start address configuration: manually with TOOLbox and PC software or auto-addressing if daisy-chained (LedSync only)

ShowMaster • Nine standard shows or up to 20 cus-

tomer-defined shows set at factory.• User-defined shows (ShowMaster): up

to 20 shows, via TOOLbox and PC software.

• Show selection: via TOOLbox and PC software or via external/remote or onboard switch

Connections• Power: screw terminals (4)• Data: screw terminals (6)• External switch: screw terminals (1)• LED groups: screw terminals (8)• Network termination: jumper (1)

Environmental ratings• Maximum ambient temperature:

60C (140F)

• Minimum ambient temperature:

0C (32F)

• Storage ambient temperature:

-40C to 95C (-40F to 203F)

• Relative humidity: non-condensing

Mounting data• Mounting orientation: any• Mounting holes: for M3 screw (2) and

M4 screw (2)• Mounting kit: DIN rail mounting

Dimensions• LxWxH: 68mm x 50mm x 14mm

2.68” x 1.97” x 0.55”

Ordering information

V2.0More information, application notes and eldoLED’s terms and conditions are available at www.eldoled.com. © 2009 eldoLED. All rights reserved.

Description Product Order nr

V-Strip Power 4 Channel voltage controlled V-Strip/P 4045 VSP40451

DIN rail clip with alu spacer (optional) DIN rail clip DRC10101


Datasheet V Series In-fixture DC Series

Highly Integrated 4A/8A/32A Dimmable LED DriversThe V Series products are constant voltage LED drivers targeted at larger networked and smaller standalone installations that require dimmable, low-power (LED strips), general white or full-color LED lighting. The V-Strip Power and V-Strip Network are DMX and LedSync compatible, V-Strip Standalone is targeted at standalone setups. The drivers’ small size makes them ideally suited for in-fixture installation, leading to less cabling, increased design freedom and improved system cost.

Applications

General white applications• Office lighting• Architectural lighting• Hospitality lighting

• Signage / advertising lighting• Retail lighting


Static/dynamic full-colour applications• Entertainment lighting• Stage lighting• Full-colour architectural lighting



Features & benefits

Input• Voltage range: 12-28VDC

Output• Voltage range: automatically selected• Load: V-Strip Power 32A (8A per group), V-Strip Network 8A (2A per group)

V-Strip Standalone 4A (1A per group)

General• Breakthrough form factors for in-fixture installation• Drive, control and thermal protection per fixture• DMX512A and LedSync compatible *• HydraDrive: 15-bit resolution• Dimming control: smooth dimming from 100% to 0.1%• Programmable parameters via TOOLbox and free software *• ShowMaster: 9 default shows, up to 20 user-defined shows,

uploadable via TOOLbox and PC software *

* does not apply to V-Strip Standalone

Product offering

Description Product Order no.V-Strip Power, 32A, DMX, 4 control channels, constant voltage, 4x LED outputs, in-fixture V-Strip/P 4045 VSP40451V-Strip Network, 8A, DMX, 4 control channels, constant voltage, 4x LED outputs, in-fixture V-Strip/N 4045 VSN40451V-Strip Standalone, 4A, constant voltage, 4x LED outputs, in-fixture V-Strip/S 4040 VSS40401


Datasheet V Series In-fixture DC Series

Dimensions and weight

V-Strip Power / V-Strip Network• Weight V-Strip/P (left): 28 g, 0.99 oz• Weight V-Strip/N (right): 22 g, 0.78 oz

V-Strip Standalone• Weight: 2.5 g, 0.09 oz

Connections

V-Strip Power and V-Strip Network

Connections • Power: screw terminals (4)• Data: screw terminals (6)• External switch: screw terminals (2)• LED groups: screw terminals (8)

Wiring• Cross section: 0.25 - 1 mm2, AWG 24 - 18• Strip length: 4.5 mm / 0.18 in.

Mounting• Mounting holes: for M3 screws (x2) and M4 screws (x2) • Ensure proper heat dissipation using e.g. a heat sink

V-Strip Standalone

Connections• Power: solder pads (2)• LED groups: solder pads (6)

Wiring • Cross section: 0.25 - 1 mm2, AWG 24 - 18• Strip length: 4.5 mm / 0.18 in.

Mounting• Mounting holes: for M3 screw (1)

Other information

Control compatibility• DMX512A control gear (does not apply to V-Strip Standalone)

Certifications• CE

Environmental ratings• Ta range: 0°C...+50°C / 32°F...+122°F• For use in dry locations• Relative humidity: non-condensing





eldoLED V-Strip-P

50 mm / 1.97”

14 mm / 0.55”

68 mm / 2.68”

eldoLEDV-Strip Network

50 mm / 1.97”

14 mm / 0.55”

68 mm / 2.68”

eldoLED 16.5 mm / 0.65”

10 mm / 0.39”

40 mm / 1.57”


Datasheet L Series In-fixture DC Series

Highly Integrated 15/20/30/50 Watt Dimmable LED DriversThe L Series products are constant current LED drivers with multiple LED outputs that are controlled over a one, two, three or four channels. They are targeted at larger networked and smaller standalone installations that require dimmable, high-power, general white or full-color LED lighting. The L Series LED drivers are renowned for their high efficiency (95%) and are DMX and LedSync compatible. The drivers’ small size makes them ideally suited for in-fixture installation, leading to less cabling, increased design freedom and improved system cost.

Applications







Features & benefits

Input• Voltage range: 12-32VDC, see page 2 for data per model

Output• Current range: selectable current settings depending on model,

see page 2• Power: 15W, 20W, 30W or 50W max, depending on model

General• Breakthrough form factors for in-fixture installation• Drive, control and thermal protection per fixture• DMX512A and LedSync compatible• HydraDrive: 15-bit resolution• Dimming control: smooth dimming from 100% to 0.1%• High efficiency: 95% at full load due to single, high-precision current source• Programmable parameters via TOOLbox and FluxTool software • NTC thermistor interface

39.6 mm / 1.56”

6 mm / 0.24”

29.9 mm / 1.18”

6 mm / 0.24”

eldoLEDL-Dot/C

50 mm / 1.97”

16 mm / 0.63”

68 mm / 2.68”

eldoLEDL-Strip/C

24 mm / 0.94”

10.6 mm / 0.41”

105 mm / 4.13”

24 mm / 0.94”

14 mm / 0.55”

34 mm / 1.34”

Datasheet L Series

Operatingsupply voltage

Poweroutput

LED output currentsettings

Weight

L-Dot Standard 24V-32V DC 0-50W Default: 350mA 5.0 g

Onboard (over solder pads): 0.18 oz

350mA, 460mA, 700mA,

900mA, 1,100mA,1,200mA

With external resistor: all

in-between values up to

1,500mA

L-Dot Nano 24V-28V DC 0-30W Default: 350mA 2.5 g

Onboard: n.a. 0.09 oz

With external resistor:

700mA - 1,000mA

L-Dot Pico 12V-28V DC 0-15W Default: 350mA 2.5 g


With external resistor: 700mA

L-Strip Connector 24V-28V DC 0-30W Default: 350mA 17.5 g

Onboard (over jumper block): 0.62 oz

350mA, 460mA, 700mA, 900mA


up to 1,000mA

L-Strip Standard 24V-28V DC 0-20W Default: 350mA 6 g



L-Dot Connector 24V-32V DC 0-50W Default: 350mA 26 g


350mA, 460mA, 700mA,

900mA, 1,100mA, 1,200mA



1,500mA

25.4 mm / 1.00”

4.5 mm / 0.18”

In-fixture DC Series

Connections Description Product Ordernumber

Power: solder pads (2) L-Dot Standard, 50W, DMX, 1 control channel, constant current L-Dot/S 1055 LDS10552

Data: solder pads (5) L-Dot Standard, 50W, DMX, 2 control channels, constant current L-Dot/S 2055 LDS20552

NTC: solder pads (2) L-Dot Standard, 50W, DMX, 3 control channels, constant current L-Dot/S 3055 LDS30552

Switch (in-fixture): solder pads (2) L-Dot Standard, 50W, DMX, 4 control channels, constant current L-Dot/S 4055 LDS40552

LED current setting: solder pads (2)

LED groups: solder pads (5)

Power: solder pads (2) L-Dot Nano, 30W, DMX, 1 control channel, constant current L-Dot/N 1025 LDN10252

Data: solder pads (3) L-Dot Nano, 30W, DMX, 2 control channels, constant current L-Dot/N 2025 LDN20252

NTC: solder pads (2) L-Dot Nano, 30W, DMX, 3 control channels, constant current L-Dot/N 3025 LDN30252

Switch: n.a. L-Dot Nano, 30W, DMX, 4 control channels, constant current L-Dot/N 4025 LDN40252



Power: solder pads (2) L-Dot Pico, 15W, DMX, 1 control channel, constant current L-Dot/P 1015 LDP10151

Data: solder pads (3) L-Dot Pico, 15W, DMX, 2 control channels, constant current L-Dot/P 2015 LDP20151

NTC: solder pads (2) L-Dot Pico, 15W, DMX, 3 control channels, constant current L-Dot/P 3015 LDP30151

Switch: n.a. L-Dot Pico, 15W, DMX, 4 control channels, constant current L-Dot/P 4015 LDP40151



Power: screw terminals (4) L-Strip Connector, 30W, DMX, 1 control channel, constant current L-Strip/C 1025 LSC10252

Data: screw terminals (6) L-Strip Connector, 30W, DMX, 2 control channels, constant current L-Strip/C 2025 LSC20252

NTC: pins (2) L-Strip Connector, 30W, DMX, 3 control channels, constant current L-Strip/C 3025 LSC30252

Switch (external): solder pad (1) L-Strip Connector, 30W, DMX, 4 control channels, constant current L-Strip/C 4025 LSC40252

LED current setting: pin (2)

LED groups: pins (5)

Power: pins (2) L-Strip Standard, 20W, DMX, 1 control channel, constant current L-Strip/S 1025 LSS10251

Data: pins (5) L-Strip Standard, 20W, DMX, 2 control channels, constant current L-Strip/S 2025 LSS20251

NTC: pins (2) L-Strip Standard, 20W, DMX, 3 control channels, constant current L-Strip/S 3025 LSS30251

Switch (external): pin (1) L-Strip Standard, 20W, DMX, 4 control channels, constant current L-Strip/S 4025 LSS40251



Power: screw terminals (2) L-Dot Connector, 50W, DMX, 1 control channel, constant current L-Dot/C 1055 LDC10552

Data: screw terminals (5) L-Dot Connector, 50W, DMX, 2 control channels, constant current L-Dot/C 2055 LDC20552

NTC: screw terminals (2) L-Dot Connector, 50W, DMX, 3 control channels, constant current L-Dot/C 3055 LDC30552

Switch (in-fixture): screw terminals (2) L-Dot Connector, 50W, DMX, 4 control channels, constant current L-Dot/C 4055 LDC40552

LED current setting: jumper block (1)

LED groups: screw terminals (5)



Other information

Wiring L-Dot/C and L-Strip/C• Cross section: 0.25 - 1 mm2, AWG 24 - 18• Strip length: 4.5 mm / 0.18 in.

Wiring L-Dot/S, L-Dot/N, L-Dot/P, L-Strip/S• Cross section: 0.25 - 0.75 mm2, AWG 24 - 20• Strip length: 4.5 mm / 0.18 in.


Control compatibility• DMX512A control gear

Mounting• Ensure proper heat dissipation using e.g. a heat sink • Mounting holes:

L-Dot Standard: for M3 screws (x2)L-Dot Nano: for M3 screws (x1)L-Dot Pico: for M2 screws (x1)L-Strip Connectors: for M3 screws (x2)L-Strip Standard: for M3 screws (x1)L-Dot Connector: for M3 screws (x2) and M4 screws (x2)

Certifications• IEC 61347-1, IEC 61347-2-13• CE






Datasheet L-Dot Connector L Series

Highly Integrated 50 Watt LED Driver/Controller

L SeriesThe L Series products are highly integrated, constant current driver/controllers for high-brightness LED lighting applications, targeted at in-fixture installation. The L Series driver/control-lers can be used in a network or as standalone devices. Show-Master, supported on all eldoLED driver/controllers, allows you to upload show sequences for use in standalone mode. Create and manage your own show sequences using the TOOLbox and freely available PC software. The L Series driver/controllers feature one LED current source for up to 4 LED groups. They are DMX- and LedSync-compat-ible, allowing 15-bit dimming and colour control and bidirec-tional communication for driver configuration and temperature read-out.

L-Dot ConnectorThe L-Dot Connector is the ideal choice for powering 350mA - 1.5A, high-brightness LEDs and is available in a 1-, 2-, 3- and 4-channel version. Thanks to LedSync Out, the L-Dot Connec-tor allows daisy-chaining of SSL fixtures and can broadcast running show sequences to all connected L Series devices.

Single current source, multiple LED colour groupseldoLED technology drives up to 4 LED (colour) groups from a single, high-precision LED current source, which not only gives the L Series driver/controllers a power efficiency of up to 95% but has also resulted in a break-through form factor.

Example of an LED group wiring schematic

High control resolutionThe L-Dot Connector supports a 15-bit control resolution per output channel for accurate dimming and fine colour mixing.

Small form factor: in-fixture installationThe small size of thedriver/controller makes itideally suited for in-fixtureinstallation, leading to less cabling, increased design freedom and improved system cost for luminaire manufacturers.

Low EMIShorter LED wires due to in-fixture installation, slew-rate con-trolled dimming, shielded conductors and the use of a single LED current source all contribute to keeping the driver’s EMI emissions at a very low level.

Robust thermal managementThe L Series’ high efficiency results in less heat at the same light output. This means you can have an equal light output from a smaller package - the driver/controller can even share the heat sink of the LED engine, lowering total system costs. Furthermore, its NTC interface enables various ways of ther-mal protection, including LED throttling, a graceful decrease of light output until normal operating temperatures are reached.

Features• USITT DMX512A- and LedSync-compatible• Break-through form factor: 68mm x 50mm / 2.68” x 1.97”• Power output of up to 50W• Onboard thermal interface for NTC

Advantages• In-fixture installation• Accurate, smooth dimming and high-res colour mixing• Power efficiency of up to 95%• Drive, control and thermal protection per fixture • Easy network setup• Low EMI


Datasheet L-Dot Connector L Series

Electrical data• LED current settings:

with onboard jumper block: 350mA, 460mA, 700mA, 900mA, 1.1A, 1.2Awith external resistor: all in between values up to 1.5A

• Power output range: 0-50W• Operating supply voltage range:

24V-32V DC• Reverse polarity protection• Efficiency: up to 95%• Processor: eldoLED FluxLogic 1600

Series• Independent LED groups: 1, 2, 3 or 4,

depending on driver version

Dynamic effects• Hydra Drive Algorithm Based Modula-

tion• Control of channel 1 (R), 2 (G), 3 (B)

and 4 (W/A): 0 - 100% in 15-bit set point resolution

• Contrast ratio: up to 8,000:1

Thermal data• Passive cooling: heat sink mounting.

Heat sink for driver must be able to dissipate 10% of power consumed by LED engine. E.g. If LEDs consume 50W, driver requires a 5W heat sink.

• Built-in protection against overheating• NTC interface: for connection of nega-

tive temperature coefficient (NTC). NTC enables temperature read-out of driver or LED engine and can be used for thermal throttling function.

Network control• Network input: USITT DMX512A or

LedSync• Network output: LedSync• Network input/output: based on RS485

specification• Input signal update rate: 8ms • Network resolution: 8 or 16 bit, set at

factory or with TOOLbox and PC soft-ware

• Network channels used by driver in 8-bit resolution: 1, 2, 3, or 4

• Network channels used by driver in 16-bit resolution: 2, 4, 6 or 8

• Communication: bidirectional for driver configuration and temperature readout

• Start address configuration (LedSync): manually with TOOLbox and PC soft-ware or auto-addressing if daisy-chained

• Start address configuration (DMX): manually with TOOLbox and PC soft-ware

ShowMaster • Nine standard shows or up to 20 cus-

tomer-defined shows set at factory.• User-defined shows (ShowMaster): up

to 20 shows, via TOOLbox and PC software.

• Show selection: via external or onboard switch or TOOLbox and PC software

Connections• Power: screw terminals (2)• Data: screw terminals (5)• NTC: screw terminals (2)• In-fixture switch: screw terminals (2)

Connections (continued)• LED current setting: jumper block (1)• LED groups: screw terminals (5)

Sample schematic of a Lamina Titan RGB


60C (140F)


0C (32F)


-40C to 95C (-40F to 203F)


Mounting data• Mounting orientation: any• Mounting holes: for M3 screws (2) and

M4 screws (2)


2.68” x 1.97” x 0.55”




L-Dot Connector 1 Channel 50W L-Dot/C 1055 LDC10552



L-Dot Connector 4 Channel 50W L-Dot/S 4055 LDS40552



Highly Integrated 15/20/30/50 Watt Dimmable LED DriversThe L Series products are constant current LED drivers with multiple LED outputs that are controlled over a one, two, three or four channels. They are targeted at larger networked and smaller standalone installations that require dimmable, high-power, general white or full-color LED lighting. The L Series LED drivers are renowned for their high efficiency (95%) and are DMX and LedSync compatible. The drivers’ small size makes them ideally suited for in-fixture installation, leading to less cabling, increased design freedom and improved system cost.

Applications







Features & benefits

Input• Voltage range: 12-32VDC, see page 2 for data per model

Output• Current range: selectable current settings depending on model,

see page 2• Power: 15W, 20W, 30W or 50W max, depending on model

General• Breakthrough form factors for in-fixture installation• Drive, control and thermal protection per fixture• DMX512A and LedSync compatible• HydraDrive: 15-bit resolution• Dimming control: smooth dimming from 100% to 0.1%• High efficiency: 95% at full load due to single, high-precision current source• Programmable parameters via TOOLbox and FluxTool software • NTC thermistor interface

39.6 mm / 1.56”

6 mm / 0.24”

29.9 mm / 1.18”

6 mm / 0.24”

eldoLEDL-Dot/C

50 mm / 1.97”

16 mm / 0.63”

68 mm / 2.68”

eldoLEDL-Strip/C

24 mm / 0.94”

10.6 mm / 0.41”

105 mm / 4.13”

24 mm / 0.94”

14 mm / 0.55”

34 mm / 1.34”

Datasheet L Series

Operatingsupply voltage

Poweroutput

LED output currentsettings

Weight

L-Dot Standard 24V-32V DC 0-50W Default: 350mA 5.0 g

Onboard (over solder pads): 0.18 oz

350mA, 460mA, 700mA,

900mA, 1,100mA,1,200mA



1,500mA

L-Dot Nano 24V-28V DC 0-30W Default: 350mA 2.5 g



700mA - 1,000mA

L-Dot Pico 12V-28V DC 0-15W Default: 350mA 2.5 g



L-Strip Connector 24V-28V DC 0-30W Default: 350mA 17.5 g


350mA, 460mA, 700mA, 900mA


up to 1,000mA

L-Strip Standard 24V-28V DC 0-20W Default: 350mA 6 g



L-Dot Connector 24V-32V DC 0-50W Default: 350mA 26 g


350mA, 460mA, 700mA,

900mA, 1,100mA, 1,200mA



1,500mA

25.4 mm / 1.00”

4.5 mm / 0.18”

In-fixture DC Series

Connections Description Product Ordernumber

Power: solder pads (2) L-Dot Standard, 50W, DMX, 1 control channel, constant current L-Dot/S 1055 LDS10552

Data: solder pads (5) L-Dot Standard, 50W, DMX, 2 control channels, constant current L-Dot/S 2055 LDS20552

NTC: solder pads (2) L-Dot Standard, 50W, DMX, 3 control channels, constant current L-Dot/S 3055 LDS30552

Switch (in-fixture): solder pads (2) L-Dot Standard, 50W, DMX, 4 control channels, constant current L-Dot/S 4055 LDS40552



Power: solder pads (2) L-Dot Nano, 30W, DMX, 1 control channel, constant current L-Dot/N 1025 LDN10252

Data: solder pads (3) L-Dot Nano, 30W, DMX, 2 control channels, constant current L-Dot/N 2025 LDN20252

NTC: solder pads (2) L-Dot Nano, 30W, DMX, 3 control channels, constant current L-Dot/N 3025 LDN30252

Switch: n.a. L-Dot Nano, 30W, DMX, 4 control channels, constant current L-Dot/N 4025 LDN40252



Power: solder pads (2) L-Dot Pico, 15W, DMX, 1 control channel, constant current L-Dot/P 1015 LDP10151

Data: solder pads (3) L-Dot Pico, 15W, DMX, 2 control channels, constant current L-Dot/P 2015 LDP20151

NTC: solder pads (2) L-Dot Pico, 15W, DMX, 3 control channels, constant current L-Dot/P 3015 LDP30151

Switch: n.a. L-Dot Pico, 15W, DMX, 4 control channels, constant current L-Dot/P 4015 LDP40151



Power: screw terminals (4) L-Strip Connector, 30W, DMX, 1 control channel, constant current L-Strip/C 1025 LSC10252

Data: screw terminals (6) L-Strip Connector, 30W, DMX, 2 control channels, constant current L-Strip/C 2025 LSC20252

NTC: pins (2) L-Strip Connector, 30W, DMX, 3 control channels, constant current L-Strip/C 3025 LSC30252

Switch (external): solder pad (1) L-Strip Connector, 30W, DMX, 4 control channels, constant current L-Strip/C 4025 LSC40252



Power: pins (2) L-Strip Standard, 20W, DMX, 1 control channel, constant current L-Strip/S 1025 LSS10251

Data: pins (5) L-Strip Standard, 20W, DMX, 2 control channels, constant current L-Strip/S 2025 LSS20251

NTC: pins (2) L-Strip Standard, 20W, DMX, 3 control channels, constant current L-Strip/S 3025 LSS30251

Switch (external): pin (1) L-Strip Standard, 20W, DMX, 4 control channels, constant current L-Strip/S 4025 LSS40251



Power: screw terminals (2) L-Dot Connector, 50W, DMX, 1 control channel, constant current L-Dot/C 1055 LDC10552

Data: screw terminals (5) L-Dot Connector, 50W, DMX, 2 control channels, constant current L-Dot/C 2055 LDC20552

NTC: screw terminals (2) L-Dot Connector, 50W, DMX, 3 control channels, constant current L-Dot/C 3055 LDC30552

Switch (in-fixture): screw terminals (2) L-Dot Connector, 50W, DMX, 4 control channels, constant current L-Dot/C 4055 LDC40552

LED current setting: jumper block (1)

LED groups: screw terminals (5)



Other information

Wiring L-Dot/C and L-Strip/C• Cross section: 0.25 - 1 mm2, AWG 24 - 18• Strip length: 4.5 mm / 0.18 in.

Wiring L-Dot/S, L-Dot/N, L-Dot/P, L-Strip/S• Cross section: 0.25 - 0.75 mm2, AWG 24 - 20• Strip length: 4.5 mm / 0.18 in.



Mounting• Ensure proper heat dissipation using e.g. a heat sink • Mounting holes:

L-Dot Standard: for M3 screws (x2)L-Dot Nano: for M3 screws (x1)L-Dot Pico: for M2 screws (x1)L-Strip Connectors: for M3 screws (x2)L-Strip Standard: for M3 screws (x1)L-Dot Connector: for M3 screws (x2) and M4 screws (x2)

Certifications• IEC 61347-1, IEC 61347-2-13• CE






Datasheet LM Series In-fixture DC Series

Highly Integrated 40/50/150 Watt Dimmable LED DriversThe LM Series products are constant current LED drivers with multiple LED outputs that are controlled over three or four channels. They are targeted at larger networked and smaller standalone installations that require dimmable, high-power, general white or full-colour LED lighting. The LM Series LED drivers are renowned for their high power output and are DMX and LedSync compatible. The drivers’ small size makes them ideally suited for in-fixture installation, leading to less cabling, increased design freedom and improved system cost.

Applications


• Signage / advertising lighting• Retail lighting





Features & benefits

Input• Voltage range: 24-32VDC

Output• Current range: via onboard jumper block per LED group.

350mA and 700mA (LM-Dot/P) or 350mA, 700mA, 1,000mA and 1,400mA (LM-Dot/C and LM-Dot/S)

• Power: max 40W, 50W or 150W

General• Ideal form factors for in-fixture installation• Drive, control and thermal protection per fixture• USITT DMX512A and LedSync compatible• HydraDrive: 15-bit resolution• Dimming control: smooth dimming from 100% to 0.1%• ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software • Reverse polarity protection• NTC thermistor interface

Product offering

Description Product Order no.LM-Dot Connector, 150W, DMX, 3 control channels, constant current, 4x LED outputs, in-fixture LM-Dot/C 3155 LMC31551LM-Dot Connector, 150W, DMX, 4 control channels, constant current, 4x LED outputs, in-fixture LM-Dot/C 4155 LMC41551LM-Dot Standard, 150W, DMX, 3 control channels, constant current, 4x LED outputs, in-fixture LM-Dot/S 3155 LMS31551LM-Dot Standard, 150W, DMX, 4 control channels, constant current, 4x LED outputs, in-fixture LM-Dot/S 4155 LMS41551LM-Dot Pico, 40W, DMX, 3 control channels, constant current, 4x LED outputs, in-fixture LM-Dot/P 3045 LMP30451LM-Dot Pico, 50W, DMX, 4 control channels, constant current, 4x LED outputs, in-fixture LM-Dot/P 4055 LMP40551


Datasheet LM Series In-fixture DC Series

Dimensions and weight

LM-Dot Connector / LM-Dot Standard• Weight LM-Dot/C (left): 37.5 g, 1.32 oz• Weight LM-Dot/S (right): 29 g, 1.02 oz

LM-Dot Pico• Weight: 27.5 g, 0.97 oz

Connections

Connections LM-Dot/C and LM-Dot/P• Power: screw terminals (2)• Data: screw terminals (6)• NTC: screw terminals (2)• Extermal switch: screw terminals (2)• LED groups: screw terminals (8)

Connections LM-Dot/S• Power: solder pads (2)• Data: solder pads (5)• NTC: solder pads (2)

Connections LM-Dot/S - cont’d• External switch: solder pads (2)• LED groups: solder pads (8)

Wiring • Cross section: 0.25 - 1 mm2, AWG 24 - 18• Strip length: 4.5 mm / 0.18 in.

Mounting• Mounting holes: for M3 screws (x2) and M4 screws (x2) • Mounting kit: DIN rail mounting• Ensure proper heat dissipation using e.g. a heat sink

Other information


Certifications• IEC 61347-1, IEC 61347-2-13 • CE






eldoLEDLM-Dot/C

50 mm / 1.97”

14 mm / 0.55”

92 mm / 3.62”

eldoLEDLM-Dot/C

50 mm / 1.97”

7.78 mm / 0.31”

92 mm / 3.62”

eldoLEDLM-Dot/Pico

50 mm / 1.97”

14 mm / 0.55”

68 mm / 2.68”


Datasheet Dimmable 12VAC LED Drivers eldoLED Technologies

Dimmable 12VAC LED Drivers

Dimmable 12VAC LED driverseldoLED 12VAC technology focuses on general white lighting applications in both retrofit and new LED luminairs. In both markets, light quality, efficiency and lifetime are important ele-ments. In addition, compatibility with existing infrastructure such as existing lamp form factor, transformers and dimmers is a key requirement for retrofit applications. The 12VAC platform is highly scalable in both power and fea-ture set. It is the basis for 5W, 8W and 10W drivers and is pre-pared for advanced features like taking in sensor inputs. The ‘multiple group - single current source’ approach is available as an option to enable dimming dependent colour tempera-ture.

High efficiency and high power factorIn AC operation, eldoLED’s 12VAC drivers run at a typical ef-ficiency of around 85% (92% typ in DC operation). Most retrofit form factors are thermally constrained. Higher energy efficien-cy in these applications will lead to either lower operating tem-peratures with similar light output - increasing expected lifetime, or to similar operating temperatures with higher light output. The eldoLED 12VAC driver power factor is > 0.8 typi-cal. Power factor is becoming a key parameter in many regu-lations. The higher power factor leads to lower apparent power - helping counter grid congestion.

No ‘off’ - no flickerLEDs have a very fast response time, especially compared to incandescent bulbs. Where a halogen lamp will still emit a - to the human eye - stable light output at line cycles of 50-60Hz, an LED-based lamp at full on will show visible flicker in the 100-120Hz range. Dimming prolongs the ‘off’ periods with not-icably more flicker. eldoLED 12VAC solutions rely on Hybrid dimming technology. This means that the LED is on through-out the entire line cycle - no off means no flicker - even when dimming through triac or phase-cut dimmers.

5W 12VAC driver

Retrofit applications: transformers and dimmersThere is a lot of existing infrastructure in 12VAC applications. In terms of compatibility, LED-based lamps for retrofit applica-tions need to be compatible with a wide variety of transformers - electronic as well as magnetic - and triac or phase-cut (lead-ing and trailing edge) dimmers. The energy efficiency of LEDs means the load for the transformer and dimmers changes: a much lower and less resistive load. eldoLED 12VAC technol-ogy works well with most transformers and dimmers.

Robust thermal managementThermal control is important in ensuring expected lifetimes. eldoLED 12VAC technology uses several methods to ensure electronics and LEDs maintain normal operating tempera-tures. The electronics have built-in over temperature protec-tion. Optionally, an NTC thermistor can be used to accurately monitor system temperatures and control LED power. When needed, a graceful decrease of power (light output) will ensure that normal operating temperatures are respected.

Features• LED current: 425mA - 1,000mA• LED Vf: up to 13.2V• Optional interface for occupancy sensor or daylight control

device• Dimming dependent colour temperature

Advantages• Flicker-free dimming down to 10% • Available in retrofit form factors• Fast custimization for customer-specific applications

eldoLED Europe bv Luchthavenweg 18a 5657 EB Eindhoven The Netherlands T +31 40 2054050 F +31 40 2054058 [email protected] America, Inc. 1762 Technology Drive # 226 San Jose, CA95110 USA T +1 408 451 9333 F +1 408 451 9335 [email protected]

Datasheet Dimmable 12VAC LED Drivers eldoLED Technologies

Electrical data: input• Line voltage: 11-15VAC

11-18VDC• Maximum line current: 1A (10W)• Line frequency: 50/60 Hz• Efficiency: 85% (AC operation)

92% (DC operation)• Power factor: 0.8

Electrical data: output• Maximum power output: 5W, 8W, 10W• Voltage output: typical 7-10VDC,

max. 13VDC• LED output current range:

425mA - 1,000mA• Independent LED groups: up to 2

Dynamic effects• Hybrid HydraDrive• Contrast ratio: > 100 : 1

12VAC LED driver demo board with LEDs

Thermal data• Life/MTBF at Ta +50C:

MTBF: 700,000 hrs Life expectancy: 35,000 hrs

Design choice• LED topology:

2 LEDs in series: Vf: 6.4V Efficiency: 83% Power factor: 0.89 3 LEDs in series: Vf: 9.6V Efficiency: 87% Power factor: 0.844 LEDs in series: Vf: 13.2V Efficiency: 91% Power factor: 0.8

10W 12VAC LED driver

Environmental ratings• Ambient temperature range:

-20C ... +50C (-4F ... +122F)


-40C ... +85C (-40F ... +185F)


Compatibility• For the most recent transformers com-

patibility list, go to www.eldoled.com/12VAC_compatibility

5W 12VAC LED driver

V1.0More information, application notes and eldoLED’s terms and conditions are available at www.eldoled.com. © 2010 eldoLED. All rights reserved


Datasheet DALI-to-DMX Bridge Accessories

DALI-to-DMX Bridge

eldoLED bridgeseldoLED network features are based on the LedSync protocol. All eldoLED products support LedSync and have built-in DMX compatibility. A number of bridges are offered that allow (1) the default LedSync/DMX universe to communicate with other network protocols such as DALI and 0-10V, or (2) networking over RF instead of wired solutions.

DALI-to-DMX bridgeThe eldoLED DALI-to-DMX bridge translates up to 32 DALI ballast values into DMX signals. The bridge is ideally suited to extend existing DALI lighting installations with a DMX uni-verse, combining the best of both worlds in one hybrid network consisting of DALI and DMX luminaires.

The bridge’s input side is completely DALI-compatible, mean-ing you can use all popular DALI control devices and commis-sioning tools to control and configure groups and scenes in DALI the way you are used to. The advantages of the DMX output side of the DALI-to-DMX bridge include the possibility of c hoosing the network resolu-tion and using the same DMX address for multiple luminaires. The DALI-to-DMX bridge autoconfigures the number of DMX channels to the number of configured DALI ballasts.

Configuring network resolution on DMX side DMX network resolution (number of bits used to send a set point over the network) can be set to either 8 or 16 bit via the bridge’s DIP switch. In 8-bit mode, every DALI ballast value is translated into one 8-bit DMX channel. In 16-bit mode, two DMX channels are used per DALI ballast value. 16-bit mode enables a 15-bit resolution fade, resulting in a smooth transi-tion between set points, invisible to the human eye.

Broadcast mode for daisy-chainingThe bridge broadcasts and replicates the DALI ballast settings over a maximum of 256 DMX channels with a 16ms update rate. The broadcast mode and set point replication gives you the advantage of daisy-chaining and auto-addressing lumi-naires, which is especially useful when networking over long cable distances.

The DALI-to-DMX bridge

Allocating a start address to multiple luminairesGrouping luminaires with exactly the same behavior is easy in DMX. All it takes is setting those luminaires to the same DMX start address. In short, combining the advantages of DALI and DMX allows you to build a far larger yet easy-to-control net-work.

Form factor The DALI-to-DMX bridge measures 68mm by 50mm or 2.68” by 1.97”. DIN rail clip and backing plate are available for easy installation in standard electric boxes.

Features• Conversion of 32 DALI ballasts into DMX512-compatible

signals• Broadcast and replication mode• Operating supply voltage range: 12V - 32V DC• DMX network resolution configurable by way of DIP switch

Advantages• Enables hybrid DALI-DMX network• Allows daisy-chaining /auto-addressing of luminaires• Smooth transition between set points• Easy connection of power, DALI and DMX• Easy setup and installation


Datasheet DALI-to-DMX Bridge Accessories

Electrical data• Operating supply voltage range:

12V - 32V DC IN• Processor: eldoLED BridgeLogic 600• Reverse polarity protection: yes• Galvanically isolated from DALI

Connections• Power: screw terminals (2)• DALI IN: screw terminals (2)• DMX OUT: screw terminals (3)

Dynamic effects• DMX control channels: 0 - 100%

Environmental ratings• Ta range:

0C to 60C (32F to 140F)


-40C to 95C (-40F to 203F)


Mounting data• Mounting orientation: any• Mounting holes: for M3 screws (2) and

M4 screws (2)

Network control• Network input: DALI• Network output: USITT DMX512A-

compatible, based on RS485 specifi-cation

• DALI network resolution: approxi-mately 5 bit (3% increments)

• USITT DMX512A network resolution: 8 bit and 16 bit

• DALI ballasts used (8-bit): 1...32• DMX channels used (8-bit): 1...32• DMX channels used (16-bit): 2...64

Thermal data• Cooling: passive


2.68” x 1.97” x 0.55”



Description Order nr

DALI-to-DMX Bridge BDD10101


Datasheet Analog-to-DMX Bridge Accessories

Analog Dimmer to DMX Bridge

eldoLED bridgesThe analog-to-DMX bridge is part of the series of bridgesdeveloped by eldoLED to interface between DMX/LedSync networks and other network protocols.

Analog-to-DMX bridgeThe analog-to-DMX bridge translates analog dimmer signals into DMX- and LedSync-compatible control signals.

The bridge comes in a DMX bridge and 5DMX bridge version. The first one allows you to pass on the converted signal to one DMX universe, the latter one to up to five DMX universes.

The eldoLED analog-to-DMX bridges are ideally suited to ret-rofit existing analog lighting installations. They allow you to make use of all the advantages offered by the digital LedSync network signals, such as prime signal integrity over long cable lengths.

Calibrating dimming valuesThe output of the dimmers that are available on the market to-day varies. eldoLED’s analog-to-DMX bridges have solved this problem: they let you calibrate dimming values, offering you maximum flexibility and the possibility of optimum system integration.

5DMX: 0-10V analog inputIn addition to the dimmer connection, the 5DMX version sup-ports a 0-10V signal. Typically, this type of signal is generated by building automation systems or light controllers and can be used to set the output of all connected LEDs.

Example of dimmer wiring schematic

Analog-to-DMX bridge

Features• Plug-and-play solution for LED dimming in existing

applications• Screw terminals allowing easy connection of leads• Operating supply voltage range: 12V - 32V DC• 0-10V interface

Advantages• Conversion of DC dimmer into USITT DMX512 or

LedSync signals• Accurate dimming solution• Easy network setup• Simplifies total system solution

StandardDimmer

Out

InIn In

Analog-to-DMX bridge

Out

68 mm2.68''


Datasheet Analog-to-DMX Bridge Accessories

Electrical data• Operating supply voltage range:

12V - 32V DC IN• Processor: eldoLED BridgeLogic 400• Reverse polarity protection: yes

Connections DMX bridge• Power: screw terminals (2)• Data: screw terminals (3)• Dimmer input: screw terminals (2)

Connections 5DMX bridge• Power: screw terminals (2)• Data: screw terminals (15)• Dimmer input: screw terminals (2)• Analog input: screw terminals (3)

Dynamic effects• Control channel 1-512: 0 - 100%


60C (140F)


0C (32F)


-40C to 95C (-40F to 203F)


Mounting data• Mounting orientation: any• Mounting holes for DMX bridge: for M3

screws (2) and M4 screws (2)• Mounting holes for 5DMX bridge: for

M4 screws (4) and M4.5 screws (2)

Network control (DMX bridge)• Network output: USITT DMX512A-

and LedSync-compatible, based on RS485 specification

• Network channels: 512• Update rate: 22ms• Communication: bi-directional for con-

figuration and temperature read-out

Network control (5DMX bridge)• Network output: USITT DMX512A-

and LedSync-compatible, based on RS485 specification

• Network channels: 5x 512• Update rate: 22ms• Communication: bi-directional for con-

figuration and temperature read-out

Thermal data• Cooling: passive

Dimensions (DMX bridge)• LxW: 68mm x 50mm / 2.68” x 1.97”

Dimensions (5DMX bridge)• LxW: 94mm x 49mm / 3.7” x 1.93”




Analog to 1x512 DMX, parameter controlled DMX Bridge Pro BDA10501

0-10V to 5x512 DMX, parameter controlled 5DMX Bridge Pro BDA50501

© 2011 eldoLED. All rights reserved. Third-party brand names mentioned are (registered) trademarks of their respective owners. V3.1More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.

Datasheet DimWheel Colour Accessories

DMX Compatible Integrated Network Dimmer

DimWheel SeriesThe DimWheel is a powerful one-button DMX controller that lets you set dim level, colour and show for LED drivers and DMX compatible luminaires. It is easy-to-install and meets EU, UK and US wall box size requirements. Also, it is compatible with most dimmer face plates available on the market.

DimWheel ColourThe DimWheel Colour features the following operation modes:• for general white LED lighting applications, the 1-channel

mode lets you dim the light and turn it on or off.• for applications requiring colour temperature control, e.g.

mixing warm and cool white light, the DimWheel features a 2-channel mode. In this mode, you can set the colour tem-perature, dim the light and turn it on or off.

• for static and dynamic full colour applications (RGB and RGBW/A), the 3- and 4-channel modes offer complete colour or show control plus dimming and on/off control. Colour control allows you to create any hue and pick a sat-uration level for this hue. Show control lets you run a show in DMX broadcast or chase mode and set the show speed.

Dimming and colour: high control resolution The DimWheel offers a large dynamic range from 100% down to 0.5%. For most applications, it suffices to have an 8-bit control resolution. In 8-bit DMX mode, DimWheel offers a gamma-corrected dimming curve. The 16-bit resolution guar-antees extremely smooth brightness control and fine colour mixing, making the DimWheel the perfect one-button digital LED dimmer.

Shows: broadcast and chaseDimWheel Colour offers two types of show modes: broadcast and chase. You can use broadcast mode for mood lighting where all connected luminaires receive the same set point (=colour) and use chase mode for linear dynamic applications. You can define and upload show sequences to the DimWheel Colour yourself by connecting the eldoLED TOOLbox to the DimWheel’s LedSync-in interface and using the freely avail-able TOOLbox PC software.

DimWheel Colour EU/UK (DLC40201) and US version (DLC40301)

Easy installationThe DimWheel fits into EU, UK and US industry-standard wall boxes and is compatible with most dimmer faceplates. The DimWheel’s mounting plate ensures easy installation into the wall box, and its push-in connectors and strain reliefs guaran-tee easy and tidy connection of wires.

Setup is a breeze!The DIP switches, which are accessible after mounting, allow you to set the operation mode, select the show mode (broad-cast or chase) and set the network resolution to 8 or 16 bit.

Features• USITT DMX512A compatible• One-button on-off/dimming/colour/show control• Operating supply voltage range: 12V-32V DC• DIP switches for configuration, accessible after mounting• External switch interface allows remote show selection• All settings saved to memory when light is switched off or

when a power glitch occurs• Front indicator LED for local show (speed), colour and dim

level feedback

Advantages• Complete functionality solution offering LED show

sequences, colour, dimming and on/off control • Can be mounted/used like standard household dimmer• Integrated back box and mounting plate simplify total sys-

tem setup and installation

eldoLED Europe bv Luchthavenweg 18a 5657 EB Eindhoven The Netherlands T +31 40 2054050 F +31 40 2054058 [email protected] America, Inc. 1762 Technology Drive # 226 San Jose, CA95110 USA T +1 408 451 9333 F +1 408 451 9335 [email protected]

Datasheet DimWheel Colour Accessories

Electrical data• Supply voltage: 12-32 VDC, SELV equiva-

lent• Maximum power: 2W• Reverse polarity protected• Processor: eldoLED DimLogic 4400 Series

DIP switches• 1 and 2: set the controller for 1, 2, 3 or 4

channel operation mode• 3: toggles between show and color mode

(3 and 4 channel mode only)• 4: sets show mode to broadcast or chase• 5: sets DMX network resolution to 8 or

16 bit

Connectors• V sup: + and - (2)• External switch input: + and - (2)• DMX in: +, - and shield (3)• LedSync out: +, - and shield (3)

User interface• Encoder type: endless• Ballistic effect: yes

Network control• Network input/output: USITT DMX512A,

based on RS485 specification• Output signal update rate: 8ms• Number of network channels: 128• Network resolution: 8- or 16-bit• Communication: bi-directional for configura-

tion and uploading of shows

Operating modes• On/off • Dimming: with gamma corrected dimming

curve (8-bit resolution)• Colour selection • Show: broadcast and chase• Show speed selection

Environmental ratings• Ta: -20C ... +60C (-4F... +140F)

• Ta storage: -40C ... +95C (-40F ...

+203F)• Relative humidity: non-condensing

Dynamic effects• Control channel 1 - 128: 0 - 100%• Control channel 129 - 256: 0 or 100%

Mounting data• Wall box compatibility: universal EU/UK

and US single gang wall box• Fixation DLC40201: fasten with two M3

screws. Choice of 8x M3 mounting hole positions.

• Fixation DLC40301: fasten with two #6 tapping screws. 2x 4.5mm/0.177” mounting holes provided.

• Faceplate compatibility: EU: universal face-plates (Gira, Busch Jaeger, Berker, Jung), UK: BS4662 compatible faceplates, US: standard single gang duplex receptacle wall plate or coax wall plate (e.g. Cooper, Leviton, Lutron, Pass & Seymour)

• Faceplate fixation DLC40201: M10 nut• Faceplate fixation DLC40301: 2x holes for

6/32 UNC threaded screws• Strain relief: provision for wire straps on

both sides (wire straps not included)

DimWheel Colour US dimensions DimWheel Colour EU/UK dimensions (DLC40301) (DLC40201)

16.35 mm0.64”

4 mm/0.16”

22.91 mm0.90”

51.0 mm / 2.00”

104.7 mm4.12”

69.2 mm / 2.72”

69.2 mm2.72”

15.8 mm0.62”

10.5 mm / 0.41”4.0 mm / 0.16”

21.8 mm0.86”


For special form factors, connectors or other customized solutions, please contact us at [email protected]. Please note that faceplate, wallbox and screws are not included with the DimWheel Colour.

Description Product Order no.DimWheel Colour, wall mount DMX controller, fits in standard EU wall box DimWheel Colour DLC40201

DimWheel Colour, US version, US wall mount DMX controller, fits in US single gang wall box DimWheel Colour DLC40301

DimWheel faceplate kit, colour: white, BS4662 standard wall box faceplate, for use with DLC40201 Faceplate DLA101W1

Leeren Teich 1333154 Salzkotten

Tel. +49 5258 / 93 51 343Fax +49 5258 / 93 51 682

www.creative-led.com

www.will-licht.de

mailto:aw%40creative-led.com?subject=Kontaktanfrage

http://www.creative-led.com

eldoLED Lichtsteuerungen

Documents

Transcript of eldoLED Lichtsteuerungen