EJC pedestrian controlled trucks are designed for intensive applications. They feature high lift heights, high residual capacities and long operating times. The powerful three-phase AC drive motor, combined with our internally developed electric controller is your guarantee for outstanding performance as well as the lowest possible energy consumption. This in turn ensures maximise produc-tivity. Exceptional user friendliness also contributes to performance and efficiency:• Loads are raised precisely and sensi-

tively by the electronically controlled lift motor. This makes the stacking of large loads in tight aisles easier.

• Proportional hydraulics ensure loads are deposited very gently on the floor and in the rack.

• Minimal noise is produced during lifting.

• With LiftPlus (optional), the EJC 214/216 can reach a lifting speed almost twice that of standard equipment when rais-ing the forks with a light load (up to 200 kg).

• Electrical tiller steering (optional) requires minimal steering force, which prevents driver fatigue – even when driving with the tiller vertical (crawl mode).

• Numerous storage options for pens, tools and documents.

After user-friendliness comes safety: The long safety tiller combined with the rounded chassis and very low apron provide maximum safety for the user.

The power is supplied to the EJC from batteries with capacities of up to 375 Ah. Battery compartments that allow for lateral battery removal are available for the EJC 214/216/220 to facilitate multi-shift operation. An on-board charger (optional) allows easy and reliable charg-ing at any 13Amp socket. The EJC 212 optionally offers a built-in charger with quick charge function.

Powerful and efficient with maintenance free 3-phase AC drive motor

Sensitive lifting and lowering with quiet, speed-controlled hydraulic motor

Sturdy chassis and four-wheel design ensure high residual capacities

Easy, effortless steering with electric tiller (optional)

Fast lifting of light loads with LiftPlus (optional)

EJC 212/214/216/220Electric pedestrian controlled truck (1200, 1400, 1600 and 2000 kg)

EJC 212/214/216/220

h4

h1

h14

max.

h14

min. 900

l2y

l1

m2 h13

h2

s

lx

c

Q h3

l6

e

b5b11 b12

a/2a/2

Ast

b1 b10

Wa

170

Mast table EJC 212–220

Designa- tion

Closed height h1 * mm

Free lift h2

mm

Lift height h3

mm

Extended height h4

mm

Closed height h1 * mm

Free lift h2

mm

Lift height h3

mm

Extended height h4

mm

EJC 212 EJC 220

Two-stage mast ZT

1750 100 2500 2975 1950 100 2500 3165

1850 100 2700 3175 – – – –

1950 100 2900 3375 2100 100 2800 3465

2100 100 3200 3675 – – – –

2300 100 3600 4075 2450 100 3500 4165

Three-stage mast DZ

1700 1227 2500 2975 1900 1235 2500 3165

1900 1427 2900 3375 2050 1385 2800 3465

2050 1577 3200 3675 – – – –

2250 1777 3600 4075 2400 1735 3500 4165

Three-stage mast DZ

1915 1408 4300 4807 1850 1150 3510 4210

2050 1543 4700 5212 2080 1380 4200 4900

– – – – 2280 1580 4800 5500

EJC 214 EJC 216

Two-stage mast ZT

1750 100 2500 2975 1750 100 2400 2925

1850 100 2700 3175 1850 100 2600 3125

1950 100 2900 3375 1950 100 2800 3325

2100 100 3200 3675 2100 100 3100 3625

2300 100 3600 4075 2300 100 3500 4025

– – – – 2450 100 3800 4325

2550 100 4100 4575 2550 100 4000 4525

2650 100 4300 4775 2650 100 4200 4725

Two-stage mast ZZ

1700 1225 2500 2975 1700 1175 2400 2925

1900 1425 2900 3375 1900 1375 2800 3325

2050 1575 3200 3675 2050 1525 3100 3625

2250 1775 3600 4075 2250 1725 3500 4025

2500 2025 4100 4575 2500 1975 4000 4525

2600 2125 4300 4775 2600 2075 4200 4725

Three-stage mast DZ

1830 1348 4090 4572 1830 1298 3990 4522

1900 1418 4300 4782 1900 1368 4200 4732

2030 1548 4690 5172 2030 1498 4590 5122

2250 1768 5350 5832 2250 1718 5250 5782

* ZT masts with 100 mm free lift

Technical data in line with VDI 2198 as at: 10/2012Id

enti

fica

tio

n

1.1 Manufacturer (abbreviation) Jungheinrich Jungheinrich Jungheinrich Jungheinrich

1.2 Manufacturer‘s type designation EJC 2123) EJC 2143) EJC 2163) EJC 2203)

1.3 Drive electric electric electric electric

1.4 Operator type pedestrian pedestrian pedestrian pedestrian

1.5 Load capacity/rated load Q (t) 1.2 1.4 1.6 2.0

1.6 Load centre distance c (mm) 600 600 600 600

1.8 Load distance (Centre of load axle to fork face) x (mm) 6882) 6892) 6892) 6892)

1.9 Wheelbase y (mm) 1336 1277 1277 1357

Wei

gh

ts 2.1 Service weight incl. battery (see line 6.5) kg 1010 1039 1044 1207

2.2 Axle loading, laden front/rear kg 750/1460 794/1645 814/1830 878/2329

2.3 Axle loading, unladen front/rear kg 680/320 721/318 724/320 805/402

Wh

eels

, Ch

assi

s

3.1 Tyres PU PU PU PU

3.2 Tyre size, front mm 230 x 70 230 x 70 230 x 70 230 x 70

3.3 Tyre size, rear mm 85 x 110 85 x 110 85 x 110 85 x 85

3.4 Additional wheels (dimensions) mm 140 x 54 140 x 54 140 x 54 140 x 54

3.5 Wheels, number front rear (x = driven wheels) 1x + 1/2 1x + 1/2 1x + 1/2 1x + 1/2

3.6 Track width, front b10 (mm) 507 507 507 507

3.7 Track width, rear b11 (mm) 400 400 400 400

Bas

ic D

imen

sio

ns

4.2 Closed mast height h1 (mm) 1950 1950 1950 2100

4.3 Free lift h2 (mm) 100 100 100 100

4.4 Lift (standard mast) h3 (mm) 2900 2900 2800 2800

4.5 Height, mast extended h4 (mm) 3375 3375 3325 3465

4.9 Height of tiller in drive position min./max. h14 (mm) 850/1305 850/1305 850/1305 850/1305

4.15 Height, lowered h13 (mm) 90 90 90 90

4.19 Overall length l1 (mm) 19672) 19081) 19081) 19882)

4.20 Length to face of forks l2 (mm) 8172) 7581) 7581) 8672)

4.21 Overall width b1 / b2 (mm) 800/– 800/– 800/– 820/–

4.22 Fork dimensions s /e / l (mm) 56/185/1150 56/185/1150 56/185/1150 61/195/1150

4.25 Width across forks b5 (mm) 570 570 570 570

4.32 Ground clearance, centre of wheelbase m2 (mm) 30 30 30 20

4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 22165) 21495) 21495) 22295)

4.34 Aisle width for pallets 800x1200 lengthways Ast (mm) 22666) 21996) 21996) 22796)

4.35 Turning radius Wa (mm) 1554 1488 1488 1568

Per

form

ance

Dat

a 5.1 Travel speed, laden/unladen km / h 6.0/6.0 6.0/6.0 6.0/6.0 5.3/5.4

5.2 Lift speed, laden/unladen m / s 0.13/0.22 0.16/0.25 0.16/0.25 0.10/0.18

5.3 Lowering speed, laden/unladen m / s 0.43/0.37 0.37/0.34 0.37/0.34 0.37/0.34

5.8 Max. gradeability, laden/unladen % 8/16 8/16 8/16 5/16

5.10 Service brake regenerative regenerative regenerative regenerative

E-M

oto

r

6.1 Drive motor rating S2 60 min kW 1.0/1.64) 1.6 1.6 1.6

6.2 Lift motor rating at S3 10 %   kW 2.07) 3.0 3.0 3.0

6.3 Battery acc. to DIN 43531/35/36 A, B, C, no B/3 PzS A/3 PzB A/3 PzB B/3 PzS

6.4 Battery voltage, nominal capacity K5 V/Ah 24/375 24/300 24/300 24/375

6.5 Battery weight kg 288 243 243 288

6.6 Energy consumption acc. to VDI cycle kWh/h 0.93 1.25 1.25 1.35

Oth

ers 8.1 Type of drive control AC AC AC AC

8.4 Sound level at the driver‘s ear according to EN 12 053 dB(A) 62 63 63 63

1) DZ: x –42 mm; l1 +42 mm; l2 +42 mm; with battery compartment L (375 Ah) + 80 mm 2) DZ: x –42 mm; l1 +42 mm; l2 +42 mm3) Values for standard mast 280 ZT, 290 ZT with battery 4) 1.6 kW output with electric steering option5) Diagonal according to VDI +214 mm6) Diagonal according to VDI +138 mm7) with S3 12 %

This specification sheet according to VDI regulation 2198 only provides technical values for the standard truck. Non-standard tyres, different masts, additional equipment etc. could produce other values. Right reserved for technical changes and improvements.

Make use of the advantages

Intelligent control and drive technologyOur motors use three-phase AC technol-ogy with electronic controllers perfectly optimised to your application offering more performance while reducing oper-ating costs. Make use of these benefits:• High efficiency with excellent energy

management.• Powerful acceleration.• Fast direction change.• Maintenance free AC drive motor.

Safe stacking and retrieval All lifting and lowering functions can be controlled intuitively on the multi-func-tion tiller head. This allows the operator to concentrate fully on stacking and retrieving.• Precise, sensitive load lifting with

speed controlled hydraulic motor with low noise.

• Gentle load depositing with propor-tional hydraulics.

• Automatic reduction of travel speed when the load is raised.

• Four-wheel concept for maximum stability.

• LiftPlus (optional): The EJC 214/216 achieves a lift speed almost twice that of standard equipment with a light load (up to 200 kg).

Practical storage compartmentsThe EJC provides ample storage space keeping the drivers workplace tidy at all times:• Paper storage on the chassis compart-

ment in the front cover.• Extra storage area next to the control

area.• Clip board.

Sturdy designThe EJC features an especially sturdy design:• Box section forks made from a single

hot-rolled piece of steel.• Steel chassis 8 mm thick.• Robust mast is especially torsion re -

sistant and has high residual capacities.• Battery cover made of strong sheet steel.• Chassis front is reinforced with

additional steel.

Service-friendly technology• Service access ports on the front of

the chassis for fast tyre change.• Castor wheel with bayonet mechanism

for easy wheel change with the truck raised only slightly.

• Easy to install mast with screw con-nection.

• Tiller electronics are completely sealed to protect against humidity and dirt according to the IP65 standard.

• Electronic controller sealed according to IP54 protection.

• Built-in charger for the EJC 212 (optional) is protected against humidity and dirt according to the IP54 protec-tion.

Long duty cycleLarge battery capacities and low energy consumption ensure long operating times. The truck can be easily charged at any 13Amp mains socket with the built-in 24-volt charger (optional) for wet cell batteries and maintenance-free batteries. The EJC 212 built-in charger is also available with a quick charge function for rapid charge times within one shift. The EJC 212 can also be used with an on-board charger in the cold store.• Battery compartment L: 3 PzS 375 Ah.• Battery compartment M: 2 PzS 225 Ah/

2 PzB 300 Ah (EJC 214/216).• Sideways battery removal (optional)

with EJC 214/216/220 for multi-shift operation.

Optional equipment• Twin load wheels.• CanDis: discharge indicator and

battery hour meter.• CanCode: access authorisation via PIN.• Load backrest.• Loads are gentled lowered and

deposited on the floor.• Cold store version.• Connection available for

terminal, scanner or printer, etc.

Precise and easy load stacking

Built-in charger cable and plugPlenty of storage options to keep important items close to hand

35

75.U

K.1

0.2

012

.r.s

.

Jungheinrich UK Ltd.

Head Office:Sherbourne House ·Sherbourne DriveTilbrook · Milton Keynes MK7 8HX

Phone 01908 363100Fax 01908 363180

info@jungheinrich.co.ukwww.jungheinrich.co.uk

Jungheinrich trucks conform to the European

Safety Requirements.

Jungheinrich Plants, Sales and Services Europe

ISO 9001/ISO 14001