EGR 334 Thermodynamics Chapter 4: Section 10-12 Lecture 18: Integrated Systems and System Analysis...
-
Upload
abraham-easter -
Category
Documents
-
view
231 -
download
1
Transcript of EGR 334 Thermodynamics Chapter 4: Section 10-12 Lecture 18: Integrated Systems and System Analysis...
EGR 334 ThermodynamicsChapter 4: Section 10-12
Lecture 18: Integrated Systems and System Analysis Quiz Today?
Today’s main concepts:• Be able to explain what an integrated system is• Be able to describe the components of some common
integrated systems • Apply mass balance, energy balance, and continuity to
streams of flow through integrated systems.
Reading Assignment:
Homework Assignment:
• No New Reading Assignment for Wed.• Read Chap 5 for Friday.
Problems from Chap 4: 95, 98, 102
3
Terms for Chap 5 Class Discussion :
• Spontaneous Heat Transfer•Clausius Statement•Kelvin-Planck Statement• Entropy Statement• Irreversible vs. Reversible• Internally Reversible Process•Carnot Corollaries•Carnot Efficiency•Max. heat pump efficiency•Max. refrigeration cycle COP•Carnot Cycle•Clausius Inequality
You may want to create a summary sheet to help you discuss each of the concepts.
►Engineers creatively combine components to achieve some overall objective, subject to constraints such as minimum total cost. This engineering activity is called system integration.
System Integration
►The simple vapor power plant of Fig 4.16 provides an illustration.
5Sec 4.11: System Integration
System Integration : Combine components to make a useful cycle Some common systems:
- Power Plant- Refrigerator- Heat Pump
Components:PipesNozzles/DiffusersTurbinesCompressors/PumpsHeat ExchangerThrottling
Integrated Thermodynamics Systems:
6Sec 4.11: System Integration
Power Plant Cycle
1. Boil WaterBurn somethingNuclear ReactionGeothermal
2. Use the steam as it rises to turn a turbine.
7Sec 4.11: System Integration
Power Plant Cycle
3.Condense Steam(to recycle water)
using a heat exchanger
4. Pump water back to boiler.
8Sec 4.11: System Integration
Power Plant Cycle
1. Boiler
2. Turbine
3. Condenser
4. Pump
9
WCV
.
Sec 4.11: System Integration
Power Plant Cycle
1. Boiler
2. Turbine
3. Condenser4. Pump
QCV
QCV
WCV
10Sec 4.11: System Integration
1.CondenserWe know that condensing something will remove heat from the fluid.
3. Evaporator
Refrigeration cycle
To have something to condense, we must have evaporated something.
(Both are heat exchangers)
11Sec 4.11: System Integration
Refrigeration cycle
1. Condenser
2. Throttling valve/ Expander
3. Evaporator
4. Compressor
12Sec 4.11: System Integration
Refrigeration Cycle 1. Condenser
2. Throttling valve/ Expander
3. Evaporator4. Compressor
WCV
QCV
QCV
13
Example: (4.103) A simple gas turbine power cycle operating at steady state with air as the working substance is shown in the figure. The cycle components include an air compressor mounted on the same shaft as the turbine. The air is heated in the high-pressure heat exchanger before entering the turbine. The air exiting the turbine is cooled in the low-pressure heat exchanger before returning to the compressor. KE and PE effects are negligible. The compressor and turbine are adiabatic. Using the ideal gas model for air, determine the
Sec 4.11: System Integration
(a) Power required for the compressor, in hp,
(b) Power output of the turbine, in hp,
(c) Thermal efficiency of the cycle
14
state 1 2 3 4
AV (ft3/min)
30,000
p (atm) 1 p2>p1 p3=p2 1
T (°R) 520 650 2000 980
h (BTU/lb) 124.27
155.51
504.71
236.02
Example: (4.103)
Sec 4.11: System Integration
(a) Power required for the compressor, in hp,(b) Power output of the turbine, in hp,(c) Thermal efficiency of the cycle
state 1 2 3 4
AV (ft3/min)
30,000
p (atm) 1 p2>p1 p3=p2 p4=p1
T (°R) 520 650 2000 980
h (BTU/lb)
state Q W
Compressor
0 ?
Heat Ex 1 0
Turbine 0 ?
Heat Ex 2 0
From Table A-22E : Ideal Gas Properties of Air Assumptions•Steady State•KE= PE = 0•Turbine and compressor are Adiabatic (QCV= 0)
•No work in Heat Ex. (WCV = 0)
•Air is modeled as an ideal gas
15
Example: (4.103)
Sec 4.11: System Integration
(a) Power required for the compressor, in hp,(b) Power output of the turbine, in hp,(c) Thermal efficiency of the cycle
state Q W
Compressor
0 ?
Heat Ex 1 0
Turbine 0 ?
Heat Ex 2 0
state 1 2 3 4
AV (ft3/min)
30,000
p (atm) 1 p2>p1 p3=p2 1
T (°R) 520 650 2000 980
h (BTU/lb) 124.27
155.51
504.71
236.02
11
VAm
v
3 2 2
2
(30,000 / min)(14.7 / )(28.97 / ) 144 60 min
(1545 / )(520 ) 1 1f m mol
f mol
ft lb in lb lb inm
ft lb lb R R ft hr
1
1
RTv
P
11
1
AV p Mm
RT
and so
137,394lb
hr
Using Continuity Eq. Ideal Gas Eq.
16
Example: (4.103)
Sec 4.11: System Integration
(a) Power required for the compressor, in hp,(b) Power output of the turbine, in hp,(c) Thermal efficiency of the cycle
state Q W
Compressor
0 ?
Heat Ex 1 0
Turbine 0 ?
Heat Ex 2 0
state 1 2 3 4
AV (ft3/min)
30,000
p (atm) 1 p2>p1 p3=p2 1
T (°R) 520 650 2000 980
h (BTU/lb) 124.27
155.51
504.71
236.02
2CV V
2CV CV
dEQ W m h gz
dt
Energy Balance (Compressor):
1 2CVW m h h
12545 /137 394 124.27 155.51 1687m
m
lb hpBTUCV hr lb Btu hrW hp
state Q W
Compressor
0 -1687
Heat Ex 1 0
Turbine 0 ?
Heat Ex 2 0
17
Example: (4.103)
Sec 4.11: System Integration
(a) Power required for the compressor, in hp,(b) Power output of the turbine, in hp,(c) Thermal efficiency of the cycle
state Q W
Compressor
0 -1687
Heat Ex 1 0
Turbine 0 14,505
Heat Ex 2 0
state 1 2 3 4
AV (ft3/min)
30,000
p (atm) 1 p2>p1 p3=p2 1
T (°R) 520 650 2000 980
h (BTU/lb) 124.27
155.51
504.71
236.02
Energy Balance (Same as Compressor): 43 hhmWCV
12545 /(137394 ) 504.71 236.02 14,505m
m
lb hpBTUCV hr lb Btu hrW hp
18
Example: (4.103)
Sec 4.11: System Integration
(a) Power required for the compressor, in hp,(b) Power output of the turbine, in hp,(c) Thermal efficiency of the cycle
state Q W
Compressor
0 -1687
Heat Ex 1 0
Turbine 0 14,505
Heat Ex 2 0
state 1 2 3 4
AV (ft3/min)
30,000
p (atm) 1 p2>p1 p3=p2 1
T (°R) 520 650 2000 980
h (BTU/lb) 124.27
155.51
504.71
236.02Find Q23 Energy Balance around heat exchanger:
gz
vhmWQ
dt
dECVCV 2
2
CV 3 2CVQ m h h
2545 /137394 504.71 155.51 18,851m
m
lb hpBTUCV hr lb Btu hrQ hp
state Q W
Compressor
0 -1687
Heat Ex 1 18,851 0
Turbine 0 14,505
Heat Ex 2 0
68.0851,18
1687505,14
HeatEx
CompressorTurbne
Q
WW
19
Example: (4.78) As sketched in the figure, a condenser using river water to condense steam with a mass flow rate of 2x105 kg/h from saturated vapor to saturated liquid at a pressure of 0.1 bar is proposed for an industrial plant. Measurements indicate that several hundred meters upstream of the plant, the river has a volumetric flow rate of 2x105 m3/h and a temperature of 15°C. For operation at steady state and ignoring changes in KE and PE, determine the river-water temperature rise, in °C, downstream of the plant traceable to use of such a condenser, and comment.
Sec 4.9: Heat Exchangers (Revisited)
20
Example: (4.78)
Sec 4.9: Heat Exchangers (Revisited)
state Pl,i Pl,e R,i R,e
Av (m3/h) 2x105
2x105
m (kg/h) 2x105 2x105
x 1 0 0 0
P (bar) 0.1 0.1
T (°C) 15 ?
h (kJ/kg)From Table A-2 : Properties of Saturated Water
state Pl,i Pl,e R,i R,e
Av (m3/h) 2x105
2x105
m (kg/h) 2x105 2x105
x 1 0 0 0
P (bar) 0.1 0.1
T (°C) 45.81 45.81 15 ?
h (kJ/kg)
state Pl,i Pl,e R,i R,e
AV (m3/h) 2x105
2x105
m (kg/h) 2x105 2x105
x 1 0 0 0
p (bar) 0.1 0.1
T (°C) 45.81 45.81 15 ?
h (kJ/kg) 2584.7
191.83
62.99
3
3
58
3R
V 2 102 10 /
1.0009 10
mhR
R mkg
Am kg hr
v
Look up intensive propertiesfor water from Tables based on known property values
21
Example: (4.78)
Sec 4.9: Heat Exchangers (Revisited)
From Table A-2 : Properties of Saturated Water (p817 & 819)
state Pl,i Pl,e R,i R,e
Av (m3/h) 2x105
2x105
m (kg/h) 2x105 2x105 2x108 2x108
x 1 0 0 0
P (bar) 0.1 0.1
T (°C) 45.81 45.81 15 ?
h (kJ/kg) 2584.7
191.83
62.99
gz
vhmWQ
dt
dECVCV 2
2
CV
, , , ,0 Pl Pl i Pl e R R i R em h h m h h
Using the energy balance simplified for a heat exchanger
, , , ,Pl
R e R i Pl i Pl eR
mh h h h
m
22
Example: (4.78)
Sec 4.9: Heat Exchangers (Revisited)
From Table A-2 : Properties of Saturated Water (p817 & 819)
state Pl,i Pl,e R,i R,e
Av (m3/h) 2x105
2x105
m (kg/h) 2x105 2x105
x 1 0 0 0
P (bar) 0.1 0.1
T (°C) 45.81 45.81 15 ?
h (kJ/kg) 2584.7
191.83
62.99
ePliPlR
PliReR hh
m
mhh ,,,,
5
, 8
2 10 /62.99 2584.7 191.83 65.38
2 10 /R e
kg hrkJ kJ kJh
kg kg kgkg hr
Using this value, the exit temperature may be found from Table A-2. TR,e = 15.6°C giving a temperature rise of 0.6 °C
Plugging known values:
23
end of Lecture 18 Slides