egeplast international GmbH - Kiwa Nederland · · 2017-05-04BS EN 12201 :" Plastics piping...
1
Number K21267/06 Replaces K21267/05 Issued 2013-04-01 First issue 2001-07-06 Kiwa Nederland B.V. Sir Winston Churchilllaan 273 Postbus 70 2280 AB RIJSWIJK The Netherlands Tel. +31 70 414 44 00 Fax +31 70 414 44 20 [email protected] www.kiwa.nl Company egeplast international GmbH Robert-Bosch-Strasse 7 48268 GREVEN Duitsland Tel. 25759710-0 Fax 25759710-110 [email protected] www.egeplast.de DECLARATION OF CONFORMITY Kiwa declares that, based on tests, the products complying with the model as certified by Kiwa and manufactured by egeplast international GmbH may, on delivery, be relied upon to comply with ; BS EN 12201 :" Plastics piping systems for water supply – Polyethylene (PE)" SPECIFICATION The following dimensions are covered under this declaration of conformity. PE63 PE80 PE100 Ø 20 mm – Ø 630 mm SDR 11 PN 10 PN 12,5 PN 16 Ø 25 mm – Ø 800 mm SDR 13,6 PN 10 PN 12,5 Ø 32 mm – Ø 1000 mm SDR 17 PN 8 PN 10 Ø 40 mm – Ø 1200 mm SDR 21 PN 6,3 PN 8 Ø 50 mm – Ø 1200 mm SDR 26 PN 4 PN 5 PN 6,3 MARKING The marking must be in compliance with BS EN 12201. Compulsory marks following this Declaration of conformity are: • Kiwa BS EN 12201 • Production dated or code. RECOMMENDATIONS FOR CUSTOMERS Check at the time of delivery whether: • the products show no visible defects as a result of transport etc. • the declaration of conformity is valid. Publication of this declaration is allowed and consists of 1 pages. Bouke Meekma Kiwa 277/130110
Transcript of egeplast international GmbH - Kiwa Nederland · · 2017-05-04BS EN 12201 :" Plastics piping...
Number K21267/06 Replaces K21267/05 Issued 2013-04-01 First issue 2001-07-06
Kiwa Nederland B.V.
Sir Winston Churchilllaan 273
Postbus 70
2280 AB RIJSWIJK
The Netherlands
Tel. +31 70 414 44 00
Fax +31 70 414 44 20
www.kiwa.nl
Company egeplast international GmbH Robert-Bosch-Strasse 7 48268 GREVEN Duitsland Tel. 25759710-0 Fax 25759710-110 [email protected] www.egeplast.de
DECLARATION OF CONFORMITY Kiwa declares that, based on tests, the products complying with the model as certified by Kiwa and manufactured by
egeplast international GmbH may, on delivery, be relied upon to comply with ; BS EN 12201 :" Plastics piping systems for water supply – Polyethylene (PE)" SPECIFICATION The following dimensions are covered under this declaration of conformity. PE63 PE80 PE100 Ø 20 mm – Ø 630 mm SDR 11 PN 10 PN 12,5 PN 16 Ø 25 mm – Ø 800 mm SDR 13,6 PN 10 PN 12,5 Ø 32 mm – Ø 1000 mm SDR 17 PN 8 PN 10 Ø 40 mm – Ø 1200 mm SDR 21 PN 6,3 PN 8
Ø 50 mm – Ø 1200 mm SDR 26 PN 4 PN 5 PN 6,3 MARKING The marking must be in compliance with BS EN 12201. Compulsory marks following this Declaration of conformity are: • Kiwa BS EN 12201 • Production dated or code.
RECOMMENDATIONS FOR CUSTOMERS Check at the time of delivery whether: • the products show no visible defects as a result of transport etc. • the declaration of conformity is valid.
Publication of this declaration is allowed and consists of 1 pages.
Bouke Meekma Kiwa
277/
1301
10
