Eewa foam welding
-
Upload
anish-patel -
Category
Engineering
-
view
206 -
download
1
Transcript of Eewa foam welding
FOAM WELDING
PRESENTATION
• Established in 1967• Export to more than 55 + countries• Experience of more than 45 years• Above 250 + Models• More than 30,000 satisfied customers from all over
India and Overseas• Primary focus on developing custom-made machinery
to suit all applications and of vast industry.
DRIVE FORCE OF EEWA
www.eewaengineering.com
Hot Plate WeldingHot Plate welding is widely used for the most challenging materials and large part assembly with high strength and hermetic requirements. During hot plate welding, both part halves are held rigidly in position against/near a thermally heated platen to melt the joining surfaces. The materials are then quickly separated from the heated source, driven together and allowed to re-solidify under pressure.
www.eewaengineering.com
TECHNOLOGY
• PU Foam• Cross linked Polyurethane Foam
www.eewaengineering.com
MATERIAL
• Programmable Logic controllers• Interlock for safety• Electrically Operated Continuous Hot Plate welding Operation• 2 Meter Long Welding Jaw• Special treated jaw with Cartridge Type Electric Heater• Both Clamping Device adjustable through pneumatic system• Fully Auto Cycle System• Mild Steel Angle frame structure• Cabinet from sheet metal works• Pneumatic products like air cylinder, filter, regulator, lubricator &
gauge• Digital temperature indicating controller• Electrical accessories like contactor, main switch, fuse• Painted with epoxy coated double mat finish
www.eewaengineering.com
SALIENT FEATURES
• Welding (Joining) of two foam sheet or such other sheet
• Can be used for welding different Length and thickness
www.eewaengineering.com
APPLICATION
CROSS SECTION VIEW AFTER WEDLING
COMMUNICATION