EDPAC International Close Control Air Conditioning Products
Transcript of EDPAC International Close Control Air Conditioning Products
Commissioning & Service Close Control AC Units
EDPAC InternationalClose Control Air Conditioning
Products
E4.19-04-04-04
Commissioning & Service Close Control AC Units
The Ranges of Close Control Products comprise of :
Close Control Modular Range : Modular units, using R407C/R410A & Chilled Water with capacities from 10 - 80 kW.
Close Control Twin Circuit Air Cooled Range : A range of Twin Circuit Air Cooled units, using R407C/R410A, from 30 - 100 kW in a single frame.
Close Control Small Systems Range : Small Systems Range units, using R407C/R410A and Chilled Water, in 2 sizes providing nominal capacities of 6 - 18 kW.
DCS/FCS Chilled Water Units : Chilled Water units in 4 sizes providing nominal capacities of 60-120 kW.
EC Plug Fan Range Units : Chilled Water & DX Air Cooled Units, using R410A, in 7 sizes providing nominal capacities of 15-175 kW.
Packaged Cooling Units : DX Air Cooled packaged units from 3-20 kW using R407C/R410A with optional freecooling.
Commissioning & Service Close Control AC Units
Close Control Modular Range
Commissioning & Service Close Control AC Units• Cooling by DX using Air
or Water/Glycol & Chilled Water.
• Glycol units available with Freecooling & Dual Cooling.
• Air Cooled units available also asDual Cool units.
• Capacities of 10-80 kW cooling in single and twin circuits.
• 10-40 kW in 5 kW increments in one Module ( Single Circuit).
• 20-80 kW in 10 kW increments in two Modules ( Twin Circuit).
Commissioning & Service Close Control AC Units
Commissioning & Service Close Control AC Units
Twin Circuit Air Cooled Units
Commissioning & Service Close Control AC Units
• A range of Twin Circuit Air Cooled units in a single frame.
• Capacities of 30-100 kW Cooling.
• 4 Frame sizes giving 30,40 - 50,60 & 70,80 kW & 100 kW.
• All units are Twin Circuit with 2x external air cooled condensers.
• Dual Cooling version available with addition of chilled water coil.
Commissioning & Service Close Control AC Units
Commissioning & Service Close Control AC Units
Close Control Small Systems Range
Commissioning & Service Close Control AC Units
• A range of small DX Air Cooled & Chilled Water units.
• The Small Systems range comprises 2 unit sizes providing nominal capacities of 6, 12 and 18 kW.
• Units are available in downflow with top return and upflow with front return. Upflow rear & bottom return also available.
• There is an option for a dual cooling version of Air Cooled & Chilled Water.
Commissioning & Service Close Control AC Units
Commissioning & Service Close Control AC Units
DCS/FCS Chilled Water Units
Commissioning & Service Close Control AC Units
• The Large Systems range of Chilled Water units comprises 4 sizes of nominal capacities of 60, 80, 100& 120 kW.
• Units are available in upflow and downflow configurations with top, bottom, front and rear return options.
• Ideal for very large data center applications where air cooled or water/glycol cooled units would be impractical due to load size.
Commissioning & Service Close Control AC Units
Commissioning & Service Close Control AC Units
EC Plug Fan Range Units
Commissioning & Service Close Control AC Units
EC Plug Fan Range Units
• The EC Plug fan range of Chilled Water & DX Air Cooled units comprises 7 sizes with nominal capacities from 20 – 140 kW
• Units are available in upflow and downflow configurations with top, bottom, front and rear return options.
• Chilled water units also have an option to place the fan under the floor increasing capacity
Commissioning & Service Close Control AC Units
EC Plug Fan Range Units
Commissioning & Service Close Control AC Units
Packaged Cooling Units
Commissioning & Service Close Control AC Units
Packaged Cooling Units
• A range of packaged DX Air Cooled units for Telecom cellular site applications.
• The ESCU range comprises 3 unit sizes providing nominal capacities of 3 - 20 kW.
• R410A & R407C refrigerants
• EC evaporator plug fans
• Units are available with an airside economiser for freecooling using outside air.
Commissioning & Service Close Control AC Units
Packaged Cooling Units
• For Telecom cellular site applications.
• R410A & R407C refrigerants
•
• EC evaporator plug fans
Commissioning & Service Close Control AC Units
Key Components
Commissioning & Service Close Control AC Units
Cabinet
Standard• 2.0mm Zintec Frame.• Interior Metal all Galvanised.• 1.2mm Zintec Exterior Panels.• Textured Epoxy Powder Paint
Finish to RAL 9018.
Optional• Other Paint Colours
Commissioning & Service Close Control AC Units
Cooling Coils
Standard• 3/8” (10mm) & 1/2” (12mm) OD Copper• Aluminium Fins• 1.8mm & 2.1mm Fin Spacings
Optional• Blygold Coating• Thermoguard Coating• Epoxy Coating• Copper Fins
Commissioning & Service Close Control AC Units
Scroll CompressorsSanyo - Japan
Scroll CompressorsCopeland – Belgium
Danfoss - France
Commissioning & Service Close Control AC Units
VSD Scroll Compressors
Danfoss – France/Denmark
Commissioning & Service Close Control AC Units
Forward Curved FansNicotra - UK
Chaysol - Spain
EC Plug FansZiehl Abegg - Germany
EBM - Germany
Commissioning & Service Close Control AC Units
Standard• Electrode Steam Boiler
• Disposable Cylinder• Capacity Adjustable 30-100%
Humidifier
Optional• Servicable Cylinder
• Low Conductivity Cylinder
Commissioning & Service Close Control AC Units
Reheat
Standard• Electric Type Reheat• Stainless Steel Tubular Element• Stainless Steel Helicoidal Fins• Balanced 2 Stage• Airstream overheat stat
Optional• 3 Stage. • Increased Reheat Capacity.• 0-10V Thyristor Control.• LPHW Reheat on/off or modulating.• Hot Gas Reheat.
Commissioning & Service Close Control AC Units
Electric MotorsSiemens - Germany
Weg - BrazilMotors
Standard• Foot Mounted• IE2 Efficiency
Optional• EC Fan / Motor • IE3 Efficiency• IE4 Efficiency (EC Fan)
Commissioning & Service Close Control AC Units
Water Control ValvesHoneywell - Germany
Johnson Controls -Holland
Head Pressure ControlJohnson Controls - Holland
Commissioning & Service Close Control AC Units
Water Cooled Condensers
Alfa Laval - SwedenGEA - Sweden
Standard• Brazed Plate Heat Exchanger• Stainless Steel Pressed Plates
Commissioning & Service Close Control AC Units
Filters
Standard• Pleated Media Disposable Type
• 30-40% Dust SpotG4 to EN 779
•Mounted in Return Airstream
Optional• Up to 70% Dust Spot Panel
F5&F6 to EN779• Up to 90% Dust Spot Bag Filters
F7&F8 to EN 779• H10 & Carbon Also Available
50mm F7 60% Panel Filter
50mm G3 20% Washable Filter
50mm G4 30% Panel Filter
100mm G4 30% Panel Filter
Commissioning & Service Close Control AC Units
Microprocessor - ControlsCarel – Italy
Johnson Controls - Italy
Standard
• DIN Rail Mounted• 4Mb Flash Memory• 4x20 Backlit LCD Display• Run / Standby Control• EC Fan Control Strategies• PID Control• EXV Valve Control• Condenser Head Pressure Control• Sensor Calibration• User Time Delays Adjustable• User Set & Hysteresis Adjustment• System Auto Restart• Manual Procedure
Commissioning & Service Close Control AC Units
Microprocessor - ControlsCarel – Italy
Johnson Controls - Italy
Optional
• Communication Cards for:MODBUSBACnet MSTPBACnet TCP/IPLON FTT10SNMP TCP/IPMetasys
• 128x64 Pixel Graphic Display• Touch Screen Graphic Displays• Additional Remote Displays• Trend Logs in .csv Format
Commissioning & Service Close Control AC Units
Optional Features
Commissioning & Service Close Control AC Units
• 3 Way Discharge Plenum• Dual Cooling• Water Warning• Condensate Pump• F5,F6,F7 Panel Filter• F8,F9 Rigid Bag Filter• F8 Rigid Carbon Filter• Return Air Attenuator• Rear / Bottom Return
• Upsized Motor• Smoke / Fire Detector• Filter Clog Switch• Floorstand• Inlet / Outlet Damper• Liquid Receiver• Oil Separator• Fresh Air Connection• Compressor Acoustic Jacket
Commissioning & Service Close Control AC Units
• Double Skin Panels• Twin Belt Drive• Volt Free Contacts• Other Voltages• Hot Gas Bypass• Hot Gas Reheat• LPHW Reheat• Steam Reheat
• Loss of Water Flow• Water Regulating Valves• Supply Air Temperature• Supply Air Humidity• Cleanable Humidifier• Low Conductivity Humidifier• Comms. Cards
Commissioning & Service Close Control AC Units
PROCESS QUALITY• ISO9001/EN29001 Certification since
March 1992• All partners certified to ISO9002
/EN29001PRODUCT CONFORMANCE• Product Designed and Manufactured in
accordance with ISO9001/EN29001• All Product CE marked through self-
certificationDESIGN CONTROL• Use of CAD /CAM facilities• 2 Solid Edge & 2 Inventor 3D Stations• Product Test & Verification
Commissioning & Service Close Control AC Units
System under Test
Load Bank
Chiller
IBM Denmark Test
Commissioning & Service Close Control AC Units
Vistakon J&J Test
Commissioning & Service Close Control AC Units
For more information concerning EDPACClose Control Products please contact :
Mr. Ciaran Coughlan - Director , Sales & MarketingEDPAC International - Cork, IrelandPh : + 353 - 21 - 4372850Fax : + 353 - 21 - 4373975E-mail : [email protected] Site : http://www.edpac.com