EDM VDM/EDM Series - Steven EngineeringVDM/EDM Series Laser Displacement Sensors • Short-,...
Transcript of EDM VDM/EDM Series - Steven EngineeringVDM/EDM Series Laser Displacement Sensors • Short-,...
-
P
hoto
ele
ctric
Laser Disp
lacemen
t Sen
sorsPhotoelectric Sensors
697Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
VDM/EDMSeriesLaserDisplacementSensors
• Short-, medium-, and long-range laser displacement sensors
• High accuracy and resolution
• Several standard interface and output options
See page 706-710 for Laser Displacement Sensor dimensions and accessories.
VDM35 Series Medium RangeSee pages 700-701
Features:• Class1infraredlaserforsensingwithClass2
visibleredalignmentlaser• Simplepushbuttonprogramming
Sensing Range:6m,30m
Outputs:PNPandanalog
VDM18 Series Short RangeSee pages 698-699
Features:• Class2visibleredlaser• Triangulationtechnologyprovidescolor
insensitivity
Sensing Range:100mm,300mm
Outputs:PNPandanalog,RS-485
EDM Series Long RangeSee pages 704-705
Features:• Class1infraredlaserforsensingwithClass2
visibleredalignmentlaser• Resolutiondownto0.1mm
Sensing Range:50m,120m,240m
Outputs:SSI,PROFIBUS-DP,INTERBUS-S
VDM70 Series Long RangeSee pages 702-703
Features:• Class1infraredlaserforsensingwithClass2
visibleredalignmentlaser• 2-lineLCDdisplayprovideseasyprogramming
andcontinuousdistancemonitoring
Sensing Range:10m,250m
Outputs:PNP,analog,RS-422,SSI
VDM35VDM18
VDM70
EDM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctr
ic
Lase
r D
isp
lace
men
t S
enso
rsPhotoelectric Sensors
698 Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
VDM18SeriesShort-RangeLaserDisplacementSensors
Specifications Diffuse ModeSENSING RANGE 30-100 mm 30-100 mm 80-300 mm 80-300 mmSENSITIVITY ADJUSTMENT Yes, pushbutton Yes, pushbutton Yes, pushbutton Yes, pushbutton
MODEL NUMBER(S) VDM18-100/32/105/122 VDM18-100/20/122/151 VDM18-300/32/105/122 VDM18-300/20/122/151
— VDM18-100/20/88/122/151 — VDM18-300/20/88/122/151
INTERFACE — RS-485 (/88 model only) — RS-485 (/88 model only)
ANALOG OUTPUT 4-20 mA 4-20 mA 4-20 mA 4-20 mA
MAXIMUM LOAD RESISTANCE 500 Ω 500 Ω 500 Ω 500 Ω
SHORT CIRCUIT AND OVERLOAD PROTECTION Yes Yes Yes Yes
DISCRETE OUTPUT 1 PNP 2 PNP 1 PNP 2 PNP
OPERATING MODE Light on/dark on Light on/dark on Light on/dark on Light on/dark on
LOAD CURRENT 100 mA 100 mA 100 mA 100 mA
VOLTAGE DROP ≤ 2.4 V ≤ 2.4 V ≤ 2.4 V ≤ 2.4 V
SWITCHING FREQUENCY ≤ 1 kHz ≤ 1 kHz ≤ 1 kHz ≤ 1 kHz
SHORT CIRCUIT AND REVERSE POLARITY PROTECTION Yes Yes Yes Yes
SUPPLY VOLTAGE 18-30 VDC 18-30 VDC 18-30 VDC 18-30 VDC
VOLTAGE RIPPLE 10% 10% 10% 10%
LED(s) Yes (8)* Yes (8)* Yes (8)* Yes (8)*
CURRENT CONSUMPTION ≤ 40 mA ≤ 40 mA ≤ 40 mA ≤ 40 mA
ACCURACY 0.5 mm 0.5 mm 0.5 mm 0.5 mm
RESOLUTION < 0.1% of the measuring range < 0.1% of the measuring range < 0.1% of the measuring range < 0.1% of the measuring range
RESPONSE TIME 0.4 ms 0.4 ms 0.4 ms 0.4 ms
READINESS DELAY ≤ 300 ms ≤ 300 ms ≤300 ms ≤300 ms
STANDARDS EN 60947-5-2 EN 60947-5-2 EN 60947-5-2 EN 60947-5-2
PROTECTION (IEC) IP67 IP67 IP67 IP67
LIGHT SPOT DIAMETER 1.5 x 3.25 mm at a distance of 100 mm 1.5 x 3.25 mm at a distance of 100 mm 2 x 4.5 mm at a distance of 300 mm 2 x 4.5 mm at a distance of 300 mm
LIGHT SOURCE Visible red laser 650 nm Class 2 Visible red laser 650 nm Class 2 Visible red laser 650 nm Class 2 Visible red laser 650 nm Class 2
AMBIENT LIGHT RESISTANCE < 5,000 lux < 5,000 lux < 5,000 lux < 5,000 lux
TEMPERATURE RANGE
WORKING +14 ºF to +140 ºF +14 ºF to +140 ºF +14 ºF to +140 ºF +14 ºF to +140 ºF
STORAGE -4 ºF to +176 ºF -4 ºF to +176 ºF -4 ºF to +176 ºF -4 ºF to +176 ºF
HOUSING MATERIAL ABS ABS ABS ABS
LENS PMMA PMMA PMMA PMMA
WEIGHT 1.5 oz 1.5 oz 1.5 oz 1.5 oz
APPROVALS
ELECTRICAL CONNECTION
5-pin quick disconnect type V15
8-pin quick disconnect type V19
5-pin quick disconnect type V15
8-pin quick disconnect type V19
ADDITIONAL DATA See pages 706-710
*See VDM18 Programming for LED functions.
StockeditemTypicaldelivery4weeksorlessConsultfactoryforallothermodels
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctric
Laser Disp
lacemen
t Sen
sorsPhotoelectric Sensors
699Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
VDM18SeriesShort-RangeLaserDisplacementSensors
WiringDiagrams
DC
Note: Wiringdiagramsshowquick disconnectpinnumbers.
QuickDisconnect
V15 Type
1 24 5 3
/32/122
Light On/Dark OnPNPandAnalogOutputs
/20/122
Light On/Dark OnPNPandAnalogOutputs
(+)
(+)
(–)
(–)
Male Receptacle End View
Male Receptacle End View
*Control Input: Laserdeactivatedwhenconnectedto(+) orkeypadlockwhenconnectedto(–)
5 Gray
Switch output 1 (PNP)
RS-485 Y/A (/88 models only)
Switch output 2 (PNP)
RS-485 Z/B (/88 models only)
Analog output 4-20 mA +
Analog output 4-20 mA –
2 Brown
1 White
3 Green4 Yellow
6 Pink7 Blue8 Red
1
234
5
68
7
Load
Load
Load
5 Gray
Analog output 4-20 mA
Switch output (PNP)
Control input*
2 White
1 Brown
3 Blue4 Black
Load
Load
VDM18-.../32 Programming:
Open Programming MenuPressthebuttons S and T simultaneouslyfor3seconds(orlonger)untiltheLED"BA"(green)flashes.Duringthistime,thepilotlaserusedforaligningthesensorisswitchedonautomatically.
Leave Programming MenuFirstpress T ,then S .Allsettingsaresavedandthesensorreturnstorunmodeafterreleasingthebuttons.Theoperatingindicator"BA"lightssteadily.Whenleavingtheprogrammingmenu,thepilotlaserisswitchedoffautomatically.
Switch Point SetupSetting of switching point QPositiontheobjectatthedesiredswitchingpoint.The"OK"LEDmustlight.Press T untilthe"Q"LEDlights.Press S once.Iftheobjectisdetectedandinoperatingrange,the"ZA"LED(red)flashesat1Hz.
Setting of window mode QPositiontheobjectatthedesiredsecondswitchingpoint.The"OK"LEDmustlight.Press S once.Thedistanceissavedasthesecondswitchingwindowlimit,iftheobjectisdetectedandinoperatingrange.The"ZA"LEDlightsforconfirmationforaslongas S ispressed.
Note:Iftheobjectwasnotmovedafterteachingtheswitchingpoint,aminimumswitchingwindow(1%oftheoperatingrange)islaidaroundthetaughtswitchpoint.
Analog SetupPositiontheobjectatthedesired0%point(4mA).The"OK"LEDmustlight.Press T untilthe"QA"LEDlights.Press S once.Iftheobjectisdetectedandintheoperatingrange,thedistanceissavedasthe0%point(4mA).The"ZA"LED(red)flashesat1Hz.Positiontheobjectatthedesired100%point(20mA).The"OK"LEDmustlight.Press S once.Iftheobjectisdetectedandintheoperatingrange,thedistanceissavedasthe100%point(20mA).The"ZA"LEDlightsforconfirmationforaslongasS ispressed.
Note:Ifthedistancebetweenthe0%pointislessthan5%oftheoperatingrange,theanalogoutputisautomaticallyscaledto5%ofthemaximumoperatingrange.Themiddleoftherangeisplacedbetweentheset0%and100%points.
Switching Between Speed and Averaging ModesPress T untilthe“Av”LEDlightsup.Theoperatingmode(speed/averaging)ischangedbypressing S repeatedly.Lookatthe"ZA"LED(red)."ZA"lights=averagingmodeisactive."ZA"doesnotlight=speedmodeisactive.
Switching Between Light and Dark ModesPress T untilthe"Nc"LEDlights.Theswitchingfunction(light/dark)ischangedbypressing S repeatedly.Lookatthe"ZA"LED(red)."ZA"lights=switchingtypedarkonisactive."ZA"doesnotlight=switchingtypelightonisactive.
Activate Factory SettingPress T untillthe"FS"LEDlights.PressS once.Thesensorisresettothefactorysettings.The"ZA"LEDlightsforconfirmationforaslongas"S"ispressed.
VDM18-.../20 Programming:ForacompletemanualcoveringtheoperationandsetupoftheVDM18-.../20laserdisplacementsensors,pleasevisitwww.pepperl-fuchs.com.
S
T
QAVNC
QAOKFS
tixE
fnoC
BA ZA
QAVNC
QAOKFS
QAVNC
QAOKFS
QAVNC
QAOKFS
QAVNC
QAOKFS
QAVNC
QAOKFS
V19 Type
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctr
ic
Lase
r D
isp
lace
men
t S
enso
rsPhotoelectric Sensors
700 Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
Specifications Diffuse Mode Retro-Reflective ModeSENSING RANGE 200 mm-6 m 200 mm-30 mSENSITIVITY ADJUSTMENT Yes, pushbutton Yes, pushbutton
MODEL NUMBER(S) VDM35-6-L/20/105/122 VDM35-30-R/20/105/122
ANALOG OUTPUT 4-20 mA 4-20 mA
MAXIMUM LOAD RESISTANCE 500 Ω 500 Ω
SHORT CIRCUIT AND OVERLOAD PROTECTION Yes Yes
DISCRETE OUTPUT 2 PNP 2 PNP
OPERATING MODE Light on/dark on Light on/dark on
LOAD CURRENT 100 mA max. 100 mA max.
VOLTAGE DROP ≤ 2.4 V ≤ 2.4 V
SWITCHING FREQUENCY Fast: 40 Hz, Slow: 16 Hz Fast: 17 Hz, Slow: 8 Hz
SHORT CIRCUIT PROTECTION Yes Yes
SUPPLY VOLTAGE 18-30 VDC 18-30 VDC
VOLTAGE RIPPLE 10% 10%
LED(s) Yes (8)* Yes (8)*
CURRENT CONSUMPTION ≤ 125 mA at 24 VDC ≤ 125 mA at 24 VDC
ACCURACY Fast: ≤ 15 mm, Slow: ≤ 10 mm Fast: ≤ 10 mm, Slow: ≤ 5 mm
RESOLUTION max. span - min. span 1024
max. span - min. span 4096
RESPONSE TIME Fast: 13 ms, Slow: 80 ms Fast: 30 ms, Slow: 65 ms
READINESS DELAY ≤ 300 ms ≤ 300 ms
STANDARDS EN 60947-5-2 EN 60947-5-2
PROTECTION (IEC) IP67 IP67
LIGHT SPOT DIAMETER 4 x 12 mm at a range of 6 m 45 x 60 mm at a range of 30 m
LIGHT SOURCE SENSING Infrared laser 905 nm Class 1 Infrared laser 905 nm Class 1
ALIGNMENT Visible red laser 650 nm Class 2 Visible red laser 650 nm Class 2
AMBIENT LIGHT RESISTANCE 5,000 lux 5,000 lux
TEMPERATURE RANGE
WORKING +14 ºF to +122 ºF +14 ºF to +122 ºF
STORAGE -40 ºF to +176 ºF -40 ºF to +176 ºF
HOUSING MATERIAL ABS ABS
LENS PMMA PMMA
WEIGHT 7 oz 7 oz
APPROVALS
ELECTRICAL CONNECTION
Quick disconnect type V15
Quick disconnect type V15
ADDITIONAL DATA See pages 706-710
*See VDM35 Programming for LED functions.
Light Spot Diameter VDM35-30-R
27.5mm
10x5mm
15x20mm
10m
30m
20m
30x40mm
45x60mm
VDM35SeriesMedium-RangeLaserDisplacementSensors
SensingCharacteristics
Light Spot Diameter VDM35-6-L
27.5mm
4x7mm
10x5mm 2m
6m
4m
3x10mm
4x12mm
DistanceX[m]
Min
imum
Ob
ject
Siz
e[m
m]
Minimum Target Size vs. Distance VDM35-6-L
0 1 2 3 4 5 60
2
4
6
8
10
x
0 1 2 3 4 5 6x
DistanceX[m]
white
gray
black
Ob
ject
col
or
Detection Ranges VDM35-6-L
StockeditemTypicaldelivery4weeksorlessConsultfactoryforallothermodels
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctric
Laser Disp
lacemen
t Sen
sorsPhotoelectric Sensors
701Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
WiringDiagrams
DC
Note: Wiringdiagramsshowquick disconnectpinnumbers.
QuickDisconnect
V15 Type
VDM35 Programming TheVDM35isoperatedby2buttons:theSetbuttonandtheTogglebutton.TheSetbuttonisforsettingorresettingtheselectedfunction.TheTogglebuttonisfortogglingthroughthemenufunctions.
Open programming menuPressSetbuttonfor3seconds.Forallsettingsgivenbelow,thesensorhastobeintheprogrammingmenu.Duringthistime,thepilotlaserusedforaligningthesensorisswitchedonautomatically.Inthismode,thesensorworksonlywithareducedswitchingfrequency.
Leave programming menu (-ESC-)Themenucanbeleftatanypoint.PresstheSetandTogglebuttonssimultaneouslyfor1second.Whenleavingtheprogrammingmenu,thepilotlaserisswitchedoffautomatically.
Switch Point 1 SetupSetting of switching point QAPressTogglebuttonuntilthemenuLEDSA1lightsup.Positionobjectatthedesiredswitchingpoint,thenpressSetbuttonfor3seconds.
Setting of window mode QAPressTogglebuttonuntilthemenuSA2lightsup.Moveobjecttothedesired“switchingoff”point,thenpressSetbuttonfor3seconds.
Invert switching output QAPressTogglebuttonuntilthemenuLEDsSA1andSA2lightup.PressSetbuttonfor3seconds,theoutputsignalisinverted.
Switch Point 2 SetupSetting of switching point QBPressTogglebuttonuntilthemenuLEDSB1lightsup.Positionobjectatdesiredswitchingpoint,thenpressSetbuttonfor3seconds.
Setting of window mode QBPressTogglebuttonuntilthemenuSB2lightsup.Positionobjectatdesired“switchingoff”point,thenpressSetbuttonfor3seconds.
Invert switching output QBPressTogglebuttonuntilthemenuLEDsSB1andSB2lightup.PressSetbuttonfor3seconds,theoutputsignalisinverted.
Analog SetupSetting of analog outputPressTogglebuttonuntilthemenuLEDsSA1andSB1lightup.Positionobjectatdesired0%point(4mA),thenpresstheSetbuttonfor3seconds.
PressTogglebuttonuntilthemenuLEDsSA2andSB2lightup.Positionobjectatdesired100%point(20mA),thenpresstheSetbuttonfor3seconds.
Ifthesetdistancebetweenthe0%andthe100%pointislessthan600mm,thesensorsetstheanalogoutputautomaticallyto600mm.Themiddleofthemeasuringrangeisplacedautomaticallybetweenthetwosetpositions.
Switching Between Fast and Slow ModePressTogglebuttonuntiltheLEDSLOWlightsup.PressSetbuttonfor3seconds,thesensorswitchesbetweenFastandSlowmode
LEDSLOWisflashingslowly->SLOWmodeLEDSLOWisflashingquickly->FASTmode
IntheSLOWmode,thesensorreachesahigherrepeatabilitywithalowerswitchingfrequency.
QA QB
S T
QA QB
S T
QA QB
S
12
T
QA QB
S
12
T
QA QB
S
12
T
QA QB
S
12
T
QA QB
S
12
T
Pin 2 Switch(PNP)output2Pin 4 Switch(PNP)output1Pin 5 Analogoutput4-20mA
1 24 5 3
Blue
Black
Brown
Gray
White
(+)
(–)/122
Light On/Dark OnPNPandAnalogOutputs
1 Brown2 White
5 Gray3 Blue
(+)
(–)
4 Black
LoadLoad
Load Load
Load
Load
Male Receptacle End View QA QB
S
12
T
QA QB
S
12
T
VDM35SeriesMedium-RangeLaserDisplacementSensors
QA QB
S
12
T
QA QB
S
12
T
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctr
ic
Lase
r D
isp
lace
men
t S
enso
rsPhotoelectric Sensors
702 Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
VDM70SeriesLong-RangeLaserDisplacementSensors
Specifications Diffuse Mode Retro-Reflective ModeSENSING RANGE 500 mm-10 m 500 mm-250 mSENSITIVITY ADJUSTMENT Yes, pushbutton Yes, pushbutton
REFERENCE TARGET – OFR-100/100 reflective tape
MODEL NUMBER(S) VDM70-10-L/87/122/160 VDM70-250-R/20/87/160
INTERFACE RS-422, SSI RS-422, SSI
ANALOG OUTPUT 4-20 mA –
MAXIMUM LOAD RESISTANCE 500 Ω –
SHORT CIRCUIT AND OVERLOAD PROTECTION Yes –
DISCRETE OUTPUT 2 PNP 2 PNP
OPERATING MODE Light on/dark on Light on/dark on
LOAD CURRENT 100 mA 100 mA
VOLTAGE DROP < 2.4 V < 2.4 V
SHORT CIRCUIT AND REVERSE POLARITY PROTECTION Yes Yes
ALARM OUTPUT 2 PNP 2 PNP
LOAD CURRENT 50 mA 50 mA
SHORT CIRCUIT PROTECTION Yes Yes
SUPPLY VOLTAGE 18-30 VDC 18-30 VDC
VOLTAGE RIPPLE 10% 10%
LED(s) Yes (4) Yes (4)
CURRENT CONSUMPTION 190 mA 190 mA
ACCURACY ± 4 mm ± 2 mm
RESOLUTION 0.1 mm or 0.125 mm 0.1 mm or 0.125 mm
RESPONSE TIME 12 ms 12 ms
STANDARDS EN 60947-5-2 EN 60947-5-2
PROTECTION (IEC) IP67 IP67
LIGHT SPOT DIAMETER 3 x 10 mm at a distance of 4 m 20 x 20 mm at a distance of 10 m
LIGHT SOURCE SENSING Infrared laser 900 nm Class 1 Infrared laser 900 nm Class 1
ALIGNMENT Visible red laser 650 nm Class 2 Visible red laser 650 nm Class 2
TEMPERATURE RANGE
WORKING +14 ºF to +122 ºF +14 ºF to +122 ºF
STORAGE -22 ºF to +167 ºF -22 ºF to +167 ºF
HOUSING MATERIAL ABS ABS
LENS PMMA PMMA
WEIGHT 8 oz 8 oz
APPROVALS
ELECTRICAL CONNECTION Quick disconnect type M16 12-pin
Quick disconnect type M16 12-pin
ADDITIONAL DATA See pages 706-710
SensingCharacteristics
0 2 4 6 8 10 12x
DistanceX[m]
white
gray
black
Ob
ject
col
or
Detection Ranges VDM70-10-L
Light Spot Diameter VDM70-10-L
27.5mm
3x10mm
1x5mm 4m
10m
6m
4x12mm
10x20mm
Light Spot Diameter VDM70-250-R
27.5 mm
20 x 20 mm
10 x 5 mm 10 m
100 m
50 m
100 x 100 mm
200 x 200 mm
250 m
500 x 500 mm
For VDM70 operation and programming, visit www.pepperl-fuchs.com
StockeditemTypicaldelivery4weeksorlessConsultfactoryforallothermodels
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctric
Laser Disp
lacemen
t Sen
sorsPhotoelectric Sensors
703Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
VDM70SeriesLong-RangeLaserDisplacementSensors
WiringDiagrams
DC
QuickDisconnect
12-Pin M16 Type
A RedB BrownC OrangeD YellowE GreenF BlueG PurpleH GrayJ WhiteK PinkL Light BlueM Black
Male Receptacle End View
Load
Load
Load
Load
Load
F G M
E D C L
H J K
B A
Tx+Switch (PNP) Output 1Rx+Analog output 4-20mA (only on VDM70-10-L)Service outputPlausibility outputV+Rx-No ConnectionTx-Switch (PNP) Output 2V-
Principles Of OperationsTheVDM70seriesareanalogdisplacementphotoelectricsensorsusingtimeofflighttechnologytomeasuredistance.ThemeasuredvaluesaremadeavailablethroughstandardRS-422interfaceorSSIcompatibleinterfacewhicharecapableofprovidingprecisepositioningwithmillimeteraccuracyandhighresolution.TheVDM70seriesfeaturea3-buttonkeypadwhichcontrolsallfunctionsandparameters.TheVDM70seriesalsofeaturea2-lineLCDdisplaywhichshowsprogramminginformationanderrorcodesaswellasprovidingcontinualdistancemonitoring.
ForacompletemanualcoveringtheoperationandsetupoftheEDMseries,pleasevisitwww.pepperl-fuchs.com.
For VDM70 operation and programming, visit www.pepperl-fuchs.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctr
ic
Lase
r D
isp
lace
men
t S
enso
rsPhotoelectric Sensors
704 Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
EDMSeriesLong-RangeLaserDisplacementSensors
Specifications Retro-Reflective ModeSENSING RANGE 500 mm-50 m 500 mm-120 m 500 mm-240 mREFERENCE TARGET Reflector 1000mm x 1000mm Reflector 1000mm x 1000mm Reflector 1000mm x 1000mm
MODEL NUMBER(S) EDM50-SSI EDM120-SSI EDM240-SSI
EDM50-P EDM120-P EDM240-P
EDM50-IBS EDM120-IBS EDM240-IBS
INTERFACE EDM...-SSI Synchronous Serial Interface Synchronous Serial Interface Synchronous Serial Interface
EDM...-P PROFIBUS-DP PROFIBUS-DP PROFIBUS-DP
EDM...-IBS INTERBUS-S INTERBUS-S INTERBUS-S
SUPPLY VOLTAGE 18-30 VDC 18-30 VDC 18-30 VDC
VOLTAGE RIPPLE 10% 10% 10%
LED(s) Yes (2) Yes (2) Yes (2)
CURRENT CONSUMPTION 0.5 A 0.5 A 0.5 A
VOLTAGE DROP < 2.4 V < 2.4 V < 2.4 V
OPERATING MODE Light on/dark on Light on/dark on Light on/dark on
ACCURACY ± 1 mm ± 1 mm ± 1 mm
RESOLUTION 0.1 mm 0.1 mm 0.1 mm
RESPONSE TIME 12 ms 12 ms 12 ms
DATA RATE 1.5 MBit/s Max. 1.5 MBit/s Max. 1.5 MBit/s Max.
STANDARDS EN 60947-5-2, EN 50082-2, EN 50081-1
EN 60947-5-2, EN 50082-2, EN 50081-1
EN 60947-5-2, EN 50082-2, EN 50081-1
PROTECTION (IEC) IP65 IP65 IP65
LIGHT SPOT DIAMETER 210 x 210 mm at 50 m 500 x 500 mm at 50 m 1 x 1 m at 50 m
LIGHT SOURCE Infrared laser 880 nm Class 1 Infrared laser 880 nm Class 1 Infrared laser 880 nm Class 1
TEMPERATURE RANGE
WORKING +50 ºF to +104 ºF +50 ºF to +104 ºF +50 ºF to +104 ºF
STORAGE -4 ºF to +167 ºF -4 ºF to +167 ºF -4 ºF to +167 ºF
HOUSING MATERIAL Aluminum, black Aluminum, black Aluminum, black
LENS Glass Glass Glass
WEIGHT 105 oz 105 oz 105 oz
APPROVALS
ELECTRICAL CONNECTION Screw Terminal
Screw Terminal
Screw Terminal
ADDITIONAL DATA See pages 706-710
For EDM operation and programming, visit www.pepperl-fuchs.com
StockeditemTypicaldelivery4weeksorlessConsultfactoryforallothermodels
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctric
Laser Disp
lacemen
t Sen
sorsPhotoelectric Sensors
705Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
EDMSeriesLong-RangeLaserDisplacementSensors
WiringDiagrams
DC
TerminalConnection
1
2
3
4
5
6
7
9
10
8
11
12
14
n.c.DATA +DATA -CLK +CLK -n.c.
GND (ISOL)
+ 24 VDC + 24 VDC
GND
GND
n.c.n.c.n.c.
n.c.
SSI
n.c.
n.c.
13 n.c.
1
2
3
4
P (B)n.c.n.c.N (A)P (B)n.c.
GND (ISOL)
n.c.n.c.n.c.
n.c.
PROFIBUS-DP
n.c.
n.c.
N (A)
1
2
3
4
5
6
7
9
10
8
11
12
14
13n.c./DO1DO1/DI1DI1/DO2
GND 1
DO2/DI2DI2
n.c.
INTERBUS-S
n.c.
GND 2
n.c.
1
2
3
4
5
6
7
9
10
8
11
12
14
13
Principles Of OperationsTheEDMseriesareanalogdisplacementphotoelectricsensorsusingtimeofflighttechnologytomeasuredistance.Themeasuredvaluesaremadeavailablethroughstandardintegratedinterfaceswhicharecapableofprovidingprecisepositioningwithmillimeteraccuracyandhighresolution.EachEDMsensorfeaturesanInfraredClass1laserforsensingandabuilt-invisibleredClass2laserforalignmentandareavailablein50m,120mor240mranges.
EDMseriessensorscomepackagedwiththefollowing:
•OMH-EDMbracket
•OperatingManual
•FloppydiskwithGSDfile(PROFIBUS-DPmodelsonly)
ForacompletemanualcoveringtheoperationandsetupoftheEDMseries,pleasevisitwww.am.pepperl-fuchs.com.
For EDM operation and programming, visit www.pepperl-fuchs.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctr
ic
Lase
r D
isp
lace
men
t S
enso
rsPhotoelectric Sensors
706 Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
VDM35
94.39 12.3
5.75
81.5
ø 5.8
42
20
42 43
93
M12
x 1
Dimensions (mm)
Emitter
Receiver
Version X (mm)VDM18-100 18.4VDM18-300 21.5
4.3
4.3
13.5
174
50
X11
450
4M12 x 1
4044
1844 4
6
VDM18
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctric
Laser Disp
lacemen
t Sen
sorsPhotoelectric Sensors
707Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
Dimensions (mm)
VDM70
95 9.5
5.75
81.5
¯ 5.8
27.4
3
42
20
42 43
93
M16
42
24 52
M5 x 8
24
50
28
43
10R
T
EDM
E
S
E
S
Vertical adjustment
Direction of measurement
Monitoring display
Diagnostic display (PROFIBUS-DP, INTERBUS-S)
Reference point
Lock screw
Receiver
Laserpointer
Transmitter
Front LED
Front viewPROFIBUS-DP
TensUnits
Plug
DIP switch no. 1
2 rotary switches(for setting the PROFIBUS address)
8 DIP switches(for setting measurement modes)
16.2
7.2
8.2
(2x)
307.2
89.5
90
3033
44
19
70
70
190
4 x PG9
SSI, INTERBUS-S
Plug
DIP switch no. 1 4 DIP switches
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctr
ic
Lase
r D
isp
lace
men
t S
enso
rsPhotoelectric Sensors
708 Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
Accessories(Dimensionsinmm)
Mounting Bracket Model OMH-VDM35for VDM35 and VDM70 series sensors.
53
90.5
140.
5
28
ø 3.1
R 2.6
ø 3.1
R 2.6
4
14
11
25
50
3
45
4
18
32
Alignment Aid Model VDM35-ARfor VDM35 and VDM70 series sensors.
See pages 855-896 for additional accessories
See pages 797-802 for reflectors
Mounting Bracket Model OMH-VDM18-01for VDM18 series sensors.
Mounting Bracket Model OMH-VDM18-02for VDM18 series sensors.
Fine Adjustment Aid Model OMH-VDM35-01for VDM35 and VDM70 series sensors. Includes both vertical and horizontal adjuster. Shown with bracket OMH-VDM35 (not included).
Cordset Model 42312A-05M-12P-SCSfor VDM70 series sensors. 5-meter length.
Cordset Model 42312A-08M-12P-SCSfor VDM70 series sensors. 8-meter length.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
P
hoto
ele
ctric
Laser Disp
lacemen
t Sen
sorsPhotoelectric Sensors
709Singapore:[email protected]:[email protected] Germany:[email protected]+FuchsGroupwww.pepperl-fuchs.comSubjecttomodificationswithoutnotice CopyrightPepperl+Fuchs
Accessories(Dimensionsinmm)
Reflector 500 mm x 500 mmReflective tape on metal plate with (4) mounting holes
Mounting Bracket Model OMH-EDM(Included with each EDM50, EDM120 and EDM240)
Lock screw
Vertical adjustment
8.2
8.2
9033
44
ø 5.3
500
480
500
480
Reflector 1000 mm x 1000 mmReflective tape on metal plate with (4) mounting holes
ø 5.3
1000
960
1000
960
OFR-100/100100 mm x 100 mm reflective tape.
OFR-1000/10001000 mm x 1000 mm reflective tape.
Reflector R140Required for EDM240 to achieve 240 m range
OMH-R140Mounting bracket for Reflector R140
M8;
16
dee
p
125.8137.5
4819
20.5
170+0.3
4?25
4
25
85
50
4
9
190
410
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com