EDM - Screen Shot for Profile Creation
-
Upload
soumyajit1986 -
Category
Documents
-
view
64 -
download
2
description
Transcript of EDM - Screen Shot for Profile Creation
1) Profile Header –
Crate Profile – T-code EEDM06 – 1. Quantity
Mandatory Field – Profile Desc., Location of PVs, Profile type, Valid from, Interval Length, PV category, Meas. Unit for MR, Currency.
Crate Profile – T-code EEDM06 – 2. Price
Mandatory Field – Profile Desc., Location of PVs, Profile type, Valid from, Interval Length, PV category, Meas. Unit for MR, Currency.
Go to SPRO
2) Create RTP Component – (SPRO Setting)
Mandatory Field – Desc., Block Category, Block, then COPY, Click Generated Component Code.
Define RTP Component –
Define RTP Interface –
3) Create RTP Interface – (SPRO Setting)
Mandatory Field – Formula Profile Calculation, Interval Length, Division, Day Offset, Result number, Res.param.desc., Operand cat., Result function, then COPY, RTP Component activation, On peak & Off Peak - Create Input Parameter, then COPY , Output Parameter, then COPY.
4) Create Billing Master Data –
Create Rate – T-code EA30
Create Schema – T-code EA35
Create Rate Category – T-code EA53
Create Rate Type – T-code EA56
Create Rate Determination – T-code EA87
5) Create Register Group – T-code EG04
6) Create Material – T-code MM01
7) Create Device Category – T-code EA01
8) Create Device – T-code IQ01
9) Create Installation – T-code ES30
10) Full Installation – T-code EG31
11) Move-in – T-code EC50E
12) Profile Allocation – T-code EEDMO4
Select Date click on Profile no. and Select Profile Allocation Role then assign Device
13) Profile Values – T-code EEDMO1
Define Quantity Value & Price Value
14) Create Meter Reading Order - T-code EL01
15) Create Billing Document – T-code EASIBI
16) Create Invoicing – T-code EA19