Editorial Board
of 1
/1
Embed Size (px)
Transcript of Editorial Board
Cement andConcreteResearch
Keith BaldieLab. of Construction Materials, MXG232, Section 12,École Polytechnique Fédérale de Lausanne (EPFL),EPFL, Ecublens, CH-1015 Lausanne, SwitzerlandE-mail: [email protected]
Della RoyMaterials Research Institute, Pennsylvania State UniversityHastings Road, University Park, PA 16802USA
H. UchikawaEtchujima Koto-Ku Tokyo 135-0044Japan
EDITOR-IN-CHIEFKaren ScrivenerLab. Of Construction Materials, MXG232Section 12École Polytechnique Fédérale de Lausanne (EPFL), EPFL, EcublensCH-1015 Lausanne, SwitzerlandE-mail: [email protected]
MANAGING EDITOR FOUNDING EDITOR
ASSOCIATE EDITORS
HONORARY EDITORIAL BOARD
E. Gartner, Lafarge Lab Central De Rech, St Quentin Fallavier, FranceC.M. Hansson, University of Waterloo, Waterloo, ON, CanadaJ.L. Provis, University of Sheffield, Sheffield, UKM. Thomas, University of New Brunswick, Fredericton, New Brunswick, CanadaR. Torrent, Materials Advanced Services Ltd., Buenos Aires, Argentina
M. AlexanderUniversity of Cape Town, Cape Town, South Africa
C. AndradeInst Eduardo Torroja, Madrid, Spain
P. BanfillHeriot-Watt University, Edinburgh, UK
A. BenturTechnion – Israel Institute of Technology, Haifa, Israel
L. BlackUniversity of Leeds, Leeds, UK
A.K. ChatterjeeThe Chatterjee Group, Calcutta, India
G. de SchutterGhent University, Ghent, Belgium
S. DiamondPurdue University, West Lafayette, IN, USA
C. FerrarisNational Institute of Standards and Technology, USA
R. FlattETH Zurich, Switzerland
E. GarbocziNational Institute of Standards and Technology, Gaithersburg, MD, USA
M. GeikerNTNU, Trondheim, Norway
F.P. GlasserUniversity of Aberdeen, Aberdeen, UK
S. HaneharaTaiheiyo Cement Corp, Sakura, Chiba, Japan
D. HerfortAalborg Portland A/S, Aalborg, FO, Denmark
D.W.S. HoThe University of Melbourne, Melbourne, Australia
H. JenningsMassachusetts Institute of Technology, MA, USA
M. JirasekCzech Technical University in Prague (Ceské Vysoké Ucení Technické), Czech Republic
B. LothenbachMaterials Science and Technology (EMPA), Dübendorf, Switzerland
D.E. MacpheeUniversity of Aberdeen, Aberdeen, UK
S. MindessUniversity of British Columbia, Vancouver, BC, Canada
P.J.M. MonteiroUniversity of California at Berkeley, USA
L.-O. NilssonLund Institute of Technology, Lund, Sweden
J. PlankTechnical University of Munich, Garching, Germany
C. QianSoutheast University, Nanjing, China
H.-W. ReinhardtUniversität Stuttgart, Stuttgart, Germany
I. RichardsonUniversity of Leeds, Leeds, UK
N. RousselUniversité Paris Est, LCPC, Paris, France
E. SamsonSIMCO Technologies Inc., Quebec, QC, Canada
G. SchererPrinceton University, Princeton, NJ, USA
C. ShiHunan University, Hunan, China
F.-J. UlmMassachusetts Institute of Technology, Cambridge, MA, USA
H. van DammeESPCI: École Supérieure de Physique et de Chimie Industrielles, Paris, France
J. WeissPurdue University, West Lafayette, IN, USA
F.H. WittmanUnterengstringen, Switzerland
K. YamadaTaiheyo Cement Corp., Japan
BOARD OF EDITORS
