Edition 04-2010 • EAME John Deere Werke Mannheim · avoid dirt on your tractor and following...
Transcript of Edition 04-2010 • EAME John Deere Werke Mannheim · avoid dirt on your tractor and following...
FENDER, SIDE EXTENSIONS, MUD GUARDS
5020, 5M, 5R, 5000, 5010, 5015, 5G,6000, 6010, 6020, 6030, 6030 Premium, 7030 & 7030 E Premium,7000, 7010, 7020, 7030, 8000, 8010, 8020, 8030, 8R Series
John Deere Werke MannheimEdition 04-2010 • EAME
TRACTORS
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 2
TURNABLE and RIGID FRONT fenders,REAR fenders, REAR Fender side extensions,
Mud flaps, Mud guards
CATALOGUE INDEX
TRACTOR SERIES PAGE
6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium.................. 3-8
6000, 6010........................................................................................................... 9-12
5020, 5M, 5R.…………………………………………………………………………. 13-14
5000 & N, 5010 & N, 5015, 5015 F&V, 5G, 5GH, 5G F&V………………………. 15-18
7000, 7010, 7020, 7030, 8020, 8030, 8R……………………………..................... 19-24
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 3
Front fenders, rear fenders, side extensions, mud guards6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium Series tractors
FRONT FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
For safer high speed roadtransport and reduced tractorsoiling. Large, full-coveragefront fenders are available with awide range of adjustments toadapt to the different treadsettings to protect the cab frommud and debris.
Description Tractor Series Part No.
W 265 mm, L 1000 mm - RH or LH (2WD) 6020 & SE, 6015, 6030, 6025 AL180331
W 320 mm, L 1070 mm - RH or LH (MFWD) 6020 & SE, 6015 AL180328
W 370 mm, L 1280 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium,6025, 7030 & 7030 E Premium AL180330
W 420 mm, L 1440 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium,6025, 7030 & 7030 E Premium AL180327
W 420 mm, L 1315 mm - RH or LH (MFWD) 6020 & SE AL180329
W 480 mm, L 1440 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium,6025, 7030 & 7030 E Premium AL180326
W 540 mm, L 1540 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium,6025, 7030 & 7030 E Premium AL180325
W 620 mm, L 1560 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium,6025, 7030 & 7030 E Premium AL180332
W = Width, L = Length
Length
Width
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 4
TURNABLE FRONT FENDERS - FIELD INSTALLATION KITSKits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Turnable front fenders allow a better steering angle - for easier and fasterturning e.g. on the headland - and therefore significantly bettermanoeuvrability of the tractor.
Please find on the next page more information regarding front fender widths andcorresponding tyre sizes.
Description Tractor Series Part No. Remark
W 370 mm, L 1280 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025,7030 & 7030 E Premium AL205773
W 420 mm, L 1440 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025,7030 & 7030 E Premium AL205774
W 480 mm, L 1440 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025,7030 & 7030 E Premium AL205776
W 540 mm, L 1540 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025,7030 & 7030 E Premium AL205779
W 620 mm, L 1560 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025,7030 & 7030 E Premium AL205781
For tractors with frontloader, please orderin addition if required:
Fender stop panel4 cyl.: 1 x AL1653356 cyl.: 1 x AL165336
Conversion kit fromRIGID to TURNABLE front fenders
- with MFWD axle 730: 6020-6220- with MFWD axle 730: 6320-6420S, 6020SE-6420SE- with MFWD axle 740: 6520 & SE, 6620 & SE- with MFWD axle 745/750: 6820-6920S- for tractors with MFWD: 6030 Premium, 7030 & 7030 E Premium
AL205783
Depending on thetractor optionsadditional parts maybe required, pleasecheck correspondingparts catalogue.
W = Width, L = Length
RIGID FRONT FENDERS - FIELD INSTALLATION KITSKits include rigid front fenders (RH & LH) plus the necessary hardware for field installation.
Please find on the next page more information regarding front fender widths and corresponding tyre sizes.
Description Tractor Series Part No.
W 265 mm, L 1000 mm (2WD only) 6020 & SE, 6015, 6030, 6025 AL180215
Base mounting kit for rigid front fenders (MFWD) 6020 & SE, 6015 AL71218
W 370 mm, L 1280 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180095
W 420 mm, L 1440 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180097
W 480 mm, L 1440 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180099
W 540 mm, L 1540 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180101
W 620 mm, L 1560 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180103
W = Width, L = Length
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 5
Overview of TURNABLE front fender widths in combination with corresponding tyre sizes
TURNABLEfender width Tyre sizes
370 mm4 cyl.: 11.2R24, 280/85R24, 12.4R24, 320/85R24, 13.6R24, 340/85R24, 11.2R28, 280/85R28, 12.4R28,320/85R28, 13.6R28, 340/85R28
6 cyl.: 13.6R24, 340/85R24, 12.4R28, 320/85R28, 13.6R28, 340/85R28
420 mm4 cyl.: 380/70R24, 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28
6 cyl.: 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28
480 mm4 cyl.: 440/65R24, 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28
6 cyl.: 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28, 16.9R28, 420/85R28, 480/70R28,16.9R30, 420/85R30, 480/70R30
540 mm4 cyl.: 540/65R24, VF 520/60R28
6 cyl.: 540/65R24, VF 520/60R28, 540/65R28, 540/65R30, 540/75R28
620 mm 6 cyl.: VF 600/60R28, 600/65R28, VF 600/60R30
Overview of RIGID front fender widths in combination with corresponding tyre sizes
RIGIDfender width Tyre sizes
370 mm4 cyl.: 280/70R16, 10.5/80-18, 11.2R24, 280/85R24, 12.4R24, 320/85R24, 13.6R24, 340/85R24, 11.2R28,280/85R28, 12.4R28, 320/85R28, 13.6R28, 340/85R28
6 cyl.: 13.6R24, 340/85R24, 12.4R28, 320/85R28, 13.6R28, 340/85R28
420 mm4 cyl.: 380/70R24, 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28
6 cyl.: 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28
480 mm4 cyl.: 440/65R24, 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28
6 cyl.: 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28, 16.9R28, 420/85R28, 480/70R28,16.9R30, 420/85R30, 480/70R30
540 mm4 cyl.: 540/65R24, VF 520/60R28
6 cyl.: 540/65R24, VF 520/60R28, 540/65R28, 540/65R30, 540/75R28
620 mm 6 cyl.: VF 600/60R28, 600/65R28
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 6
REAR FENDERS - INDIVIDUAL PARTSAdditional parts are required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
Rear fender - RH6020 & SE,6030, 6030 Premium,7030 & 7030 E Premium
AL168326
Rear fender - LH6020 & SE,6030, 6030 Premium,7030 & 7030 E Premium
AL168325
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Rear fender side extensions tractors provide…
Protection from mud, stones and debrisProtection to avoid dirt on your tractor and on the followingvehiclesBetter visibility through clear windowsCoverage also of large tyresAn easy installation in a few work steps
The extensions can be combined with snow chains on rear wheels,for example for forestry applications.
Description Tractor Series Tyre size Part No.
110 x 15 mm - RH L200789
110 x 15 mm - LH
cab only: 6020 & SE,6030, 6030 Premium,7030 & 7030 E Premium
18.4R30,16.9R34, 420/85R34, 480/70R34,13.6R38, 18.4R38, 460/85R38 L200788
110 x 60 mm - RH L200784
110 x 60 mm - LH
cab only: 6020 & SE,6030, 6030 Premium,7030 & 7030 E Premium
16.9R30, 18.4R30,16.9R34, 18.4R34, 480/70R34,13.6R38, 14.9R38, 16.9R38, 420/85R38, 18.4R38,460/85R38, 480/70R38, 520/70R38, 540/65R38 L200783
200 x 20 mm - RH L200797
200 x 20 mm - LH
cab only: 6020 & SE,6030, 6030 Premium,7030 & 7030 E Premium
520/70R38, 20.8R38, 520/85R38, 580/70R38,600/65R38, 650/65R38 L200793
190 x 65 mm - RH L200787
190 x 65 mm - LH
cab only: 6020 & SE,6030, 6030 Premium,7030 & 7030 E Premium
520/70R34,520/70R38, 20.8R38, 520/85R38, 540/65R38,600/65R38, 650/65R38 L200785
Rear fender
Side extension
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 7
REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KITSKits include side extensions (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Tyre size Part No.
110 x 15 mm - RH & LH cab only: 6030, 6030 Premium,7030 & 7030 E Premium 18.4R38, 460/85R38 AL174767
110 x 60 mm - RH & LH cab only: 6030, 6030 Premium,7030 & 7030 E Premium
18.4R30,16.9R34, 18.4R34, 480/70R34,13.6R38, 14.9R38, 16.9R38, 420/85R38,18.4R38, 460/85R38, 480/70R38,520/70R38, 540/65R38
AL174768
200 x 20 mm - RH & LH cab only: 6030, 6030 Premium,7030 & 7030 E Premium
520/70R38, 20.8R38, 520/85R38,580/70R38, 600/65R38, 650/65R38 AL174769
190 x 65 mm - RH & LH cab only: 6030, 6030 Premium,7030 & 7030 E Premium
520/70R34,520/70R38, 20.8R38, 520/85R38,540/65R38, 600/65R38, 650/65R38
AL174770
Mounting partsfender side extensions& mud guards
Order in addition, if required. AL120094
MUD FLAP FOR REAR FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Additional mud flaps significantly reduce the amount of spray and mudthrown up by the rear wheel. They provide additional protection toavoid dirt on your tractor and following vehicles which is especiallyimportant for heavy duty work and bad weather conditions. The resultis a cleaner cab and better operator visibility.
Description Tractor Series Part No. Remarks
Mud flap - RH or LH cab only: 6020 & SE, 6030,6030 Premium, 7030 & 7030 E Premium L156612
Can be combined with side extension:- 190 x 65 mm- 190 / 200 x 20 mm
MUD FLAPS FOR REAR FENDERS - FIELD INSTALLATION KITKit includes mud flaps (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remarks
2 mud flaps -rear fenders
cab only: 6020 & SE,6030, 6030 Premium,7030 Premium,7030 E Premium
AL159975Can be combined withside extension:- 190 x 65 mm- 190 / 200 x 20 mm
Mud flap
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 8
MUD GUARDS FOR STEPS - INDIVIDUAL PARTSAdditional parts are required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Mud guards for steps extend the coverageoffered by the rear fenders. They are madefrom rugged material and protect the stepsfrom mud and debris.
Description Tractor Series Part No.
Mud guard - RH L116671
Mud guard - LH4 cyl. models without suspended cab: 6020 & SE, 6030, 6030 Premium
L116670
Mud guard - RH L116673
Mud guard - LH
4 cyl. models with suspended cab: 6020, 6030 Premium
all 6 cyl. cab models: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium L116672
MUD GUARDS - FIELD INSTALLATION KITSKits include mud guards (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No.
Mud guards - RH & LH 4 cyl. models without suspended cab: 6030, 6030 Premium AL174141
Mud guards - RH & LH4 cyl. models with suspended cab: 6030 Premium
all 6 cyl. cab models: 6030, 6030 Premium, 7030 & 7030 E PremiumAL174142
Mounting parts - fender sideextensions & mud guards Order in addition, if required. AL120094
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 9
Front fenders, rear fenders, side extensions, mud flaps, mud guards6000, 6010 Series tractors
FRONT FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
W 265 mm, L 1000 mm - RH or LH (2WD) 6000 & SE, 6010 & SE, 6005 AL180331
W 320 mm, L 1070 mm - RH or LH (MFWD) 6000, 6010 AL180328
W 370 mm, L 1280 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180330
W 420 mm, L 1440 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180327
W 420 mm, L 1315 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180329
W 480 mm, L 1440 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180326
W 540 mm, L 1540 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180325
W 620 mm, L 1560 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180332
W = Width, L = Length
TURNABLE FRONT FENDERS - FIELD INSTALLATION KITSKits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No.
W 370 mm, L 1280 mm - RH & LH 6000 & SE, 6010 & SE AL205773
W 420 mm, L 1440 mm - RH & LH 6000 & SE, 6010 & SE, 6005 AL205774
W 480 mm, L 1440 mm - RH & LH 6000 & SE, 6010 & SE, 6005 AL205776
W 540 mm, L 1540 mm - RH & LH 6000 & SE, 6010 & SE AL205779
W = Width, L = Length
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 10
REAR FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Models Part No. Remark
A Rear fender - RH L101648 with registration plate
A Rear fender - LHcab only: 6000, 6010
L101649 without registration plate
A Rear fender - RH L101643 without registration plate
A Rear fender - LHcab only: 6000, 6010
L101642 with registration plate
A Rear fender - RH L110271 with registration plate
A Rear fender - LH6000SE, 6010SE
L110272 without registration plate
A Rear fender - RH L110885 without registration plate
A Rear fender - LH6000SE, 6010SE
L110884 with registration plate
A Rear fender - RH L110885
A Rear fender - LH
with 2-post roll-guard:6010 L110272
B Rear fender - RH L79685
B Rear fender - LHwith 2-post roll-guard:6000, 6010 L79683
C Rear fender - RH L77510
C Rear fender - LH6000 & SE, 6010 & SE
L77511
RIGID FRONT FENDERS - FIELD INSTALLATION KITSKit includes rigid front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No.
W 265 mm, L 1000 mm (2WD) 6000 & SE, 6010 & SE, 6005 AL180215
Base mounting kit for rigid front fenders (MFWD) 6000 & SE, 6010 & SE, 6005 AL71218
W = Width, L = Length
CB
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 11
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
A Side extension - RH L101638
A Side extension - LHcab only: 6000 & SE, 6010 & SE
L101534
B Side extension - LH or RH cab only: 6000 & SE, 6010 & SE L101609
C Additional side extension - extra wide, LH or RHonly in combination with A or B
cab only: 6000, 6010 & SE L110877
MUD FLAP FOR REAR FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark
Mud flap - RH cab only: 6000, 6010 & SE L110876
Mud flap - LH cab only: 6000, 6010 & SE L110875
For tractors with fender sideextensions (A or B see above)already installed.
MUD FLAP KIT FOR REAR FENDERS - FIELD INSTALLATION KITKits include mud flaps (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remark
2 mud flaps -rear fenders
cab only: 6000, 6010 & SE AL81709For tractors with fender sideextensions (A or B see above)already installed.
B
AC
Mud flap
Side extensionalready installed
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 12
MUD FLAPS FOR REAR FENDERS / EXTRA WIDE - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark
Mud flap, extra wide - RH L110611
Mud flap, extra wide - LH
cab only:6000, 6010 & SE
L110610
These mud flaps are recommended if oneside extension, plus the additional sideextension L110877 are already installed oneach fender.
MUD GUARDS FOR STEPS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
Mud guard - RH L111350
Mud guard - LH
4 cyl. cab models:6000, 6010 & SE
L111348
Mud guard - RH L111351
Mud guard - LH
6 cyl. cab models:6000, 6010 & SE L111349
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 13
Front fenders, rear fenders, side extensions5020, 5M, 5R Series tractors
FRONT FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
W 320 mm, L 1070 mm - RH or LH 5020 AL180328
W 370 mm, L 1280 mm - RH or LH 5020, 5M, 5R AL180330
W 420 mm, L 1440 mm - RH or LH 5020, 5M, 5R AL180327
W 420 mm, L 1315 mm - RH or LH 5020 AL180329
W 480 mm, L 1440 mm - RH or LH 5020, 5M, 5R AL180326
W = Width, L = Length
TURNABLE FRONT FENDERS - FIELD INSTALLATION KITSKits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Please find on the next page more information regarding front fender widths and corresponding tyre sizes.
Description Tractor Series Part No.
5020, 5R LG102498W 370 mm, L 1280 mm
5M LG102655
5020, 5R LG102500W 420 mm, L 1440 mm
5M LG102657
5020, 5R LG102502W 480 mm, L 1440 mm
5M LG102659
Conversion kit from rigid to turnable front fenders 5M LG102420
W = Width, L = Length
RIGID FRONT FENDERS - FIELD INSTALLATION KITSKits include rigid front fenders (RH & LH) plus the necessary hardware for field installation.
Please find on the next page more information regarding front fender widths and corresponding tyre sizes.
Description Tractor Series Part No.
Base mounting kit for rigid front fenders 5020 LG100707
5020, 5R LG102499W 370 mm, L 1280 mm
5M LG102656
5020, 5R LG102501W 420 mm, L 1440 mm
5M LG102658
W 480 mm, L 1440 mm 5020, 5R LG102503
W = Width, L = Length
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 14
Overview of front fender widths in combination with corresponding tyre sizes
Front fender width Tyre sizes
370 mm 375/70R20, 14.9R20, 360/70R24, 12.4R24, 320/85R24, 280/85R24, 11.2R24, 320/70R24,11.2R28, 280/85R28
420 mm 13.6R24, 340/70R24, 380/70R24
480 mm 420/65R24, 440/65R24
REAR FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
RH R252621
LH5020, 5M, 5R
R252619
RH RE259007
LH
vineyard tractorversion only: 5020;
5RN RE259006
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
RH SU293837
LH5020, 5M, 5R
R180912
REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KITKit includes rear fender side extensions (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No.
RH & LH 5020, 5M, 5R LG100448
Side extension
Rear fender
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 15
Front fenders, rear fenders, side extensions5000 & N, 5010 & N, 5015, 5015 F&V, 5G, 5GH, 5GF, 5GV Series tractors
FRONT FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
2WD - RH or LH5000, 5000N, 5010, 5010N,
5015, 5015 F&V,5G, 5GH, 5G F&V
ER123947
4WD - RH or LH 5000N, 5010N,5015 F&V, 5G F&V ER124744
4WD - RH or LH 5000, 5010,5015 with rigid fenders ER191744
4WD - RH or LH 5015 with turnable fender,5G, 5GH ER200934
TURNABLE FRONT FENDERS - FIELD INSTALLATION KITSKits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remarks
4WD 5015, 5G, 5GH ER067610 includes fender ER200934
RIGID FRONT FENDERS - FIELD INSTALLATION KITSKits include rigid front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remarks
2WD 5000, 5010, 5015,5G, 5GH ER066408 includes fender ER123947
2WD 5000N, 5010N,5015 F&V, 5G F&V ER066436 includes fender ER123947
4WD 5000, 5010, 5015 ER066472 includes fender ER191744
4WD 5000N, 5010N,5015 F&V, 5G F&V ER066437 includes fender ER124744
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 16
REAR FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Type Tractor Series Part No.
A up to serial no. 007484: 5300, 5400 ER136517RH or LH
A from serial no. 007485: 5300, 5400;5500 ER190245
RH A ER195327
LH Aup to serial no. 105113: 5010 & HC
ER195326
RH or LH A from serial no. 105114: 5010 & HC ER203125
RH A ER190327
LH A5000N, 5010N
ER190328
RH A ER200704
LH A5015 & HC
ER200705
A ER209462RH
B5G, 5GH
ER372463
A ER209463LH
B5G, 5GH
ER372464
RH A ER208499
LH A5G F&V
ER208500
Rear fender Shown on 5015 SeriesType A Rear fender
Type BRear fenderType A
Shown on 5G Series
Type B
Type A
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 17
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tyres Tractor Series Part No.
125 mm - RH or LH, rigid 5300, 5400 ER135398
200 mm - RH or LH, rigid 5500; 5010 ER190243
190 mm - RH or LH, rigid 5015 ER200566
180 mm - RH, rigid ER209724
180 mm - LH, rigid5G, 5GH
ER209725
145 mm - RH, rigid 24” ER195272
145 mm - LH, rigid 24” ER195273
145 mm - RH, rigid 28” ER195075
145 mm - LH, rigid 28” ER195076
175 mm - RH, rigid 20” ER195274
175 mm - LH, rigid 20”
5000SN, 5010SN, 5015 V, 5GV
ER195275
205 mm - LH, rigid 24“ ER195848
205 mm - RH, rigid 24” ER195849
205 mm - LH, rigid 28” ER195850
205 mm - RH, rigid 28”
5000N, 5010N, 5015 F, 5GF
ER195851
100 mm - RH, rubber 28“ ER195276
100 mm - LH, rubber 28“5000SN, 5010SN, 5015 V, 5G F&V
ER195277
205 mm - RH or LH, rubber 28” 5000N, 5010N & SN, 5015 F ER125167
Rear fender side extensionShown on 5G Series
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 18
REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KITKit includes rear fender side extensions (RH & LH) plus the necessary hardware for field installation.
Description Tyres Tractor Series Part No. Remarks
125 mm - RH & LH, rigid 5300, 5400 ER066410 includes side extensions2 x ER135398
200 mm - RH & LH, rigid 5500; 5010 ER066464 includes side extensions2 x ER190243
190 mm - RH & LH, rigid 5015 ER067608 includes side extensions2 x ER200566
180 mm - RH & LH, rigid 5G, 5GH ER067871 includes side extensionsER209724, ER209725
145 mm - RH & LH, rigid 24“ 5010SN ER067550 includes side extensionER195272, ER195273
145 mm - RH & LH, rigid 28“ 5010SN ER067551 includes side extensionsER195075, ER195076
175 mm - RH & LH, rigid 20“ 5010SN ER067549 includes side extensionER195274, ER195275
205 mm - RH & LH, rigid 24“ 5010N ER067552 includes side extensionsER195848, ER195849
205 mm - RH & LH, rigid 28” 5010N ER067553 includes side extensionsER195850, ER195851
100 mm - RH & LH, rubber 28” 5000SN, 5010SN,5015 V, 5G F&V ER067554 includes side extensions
ER195276, ER195277
205 mm - RH & LH, rubber 28” 5000N, 5010N,5015 F ER065699 includes side extensions
2 x ER125167
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 19
Front fenders, rear fenders, side extensions, mud guards7000, 7010, 7020, 7030, 8000, 8010, 8020, 8030 and 8R Series tractors
FRONT FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark Order through
W 394 mm - RH or LH 7000, 7010, 8000with 2WD only
AR86406 EPDC
W 480 mm - RH or LH 7000, 7010, 7020 R192450 7020: up to serial no. 032704
W 480 mm - RH or LH 8000, 8010, 8020 R191189 8020: up to serial no. 015456
W 480 mm - RH 7020, 7030,8020, 8030, 8R RE223407
W 480 mm - LH 7020, 7030,8020, 8030, 8R RE223406
7020: from serial no. 032705
8020: from serial no. 015457
EPDC
W 620 mm - RH 7000, 7010, 7020,8000, 8010, 8020 R192452
W 620 mm - LH 7000, 7010, 7020,8000, 8010, 8020 R192451
7020: up to serial no. 032704
8020. up to serial no. 027762
W 620 mm - RH 7020, 7030,8020, 8030, 8R RE223409
W 620 mm - LH 7020, 7030,8020, 8030, 8R RE223408
7020: from serial no. 032705
8020: from serial no. 027763
EPDC
W = Width
2WD FRONT FENDERS - FIELD INSTALLATION KITSKits include front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Order through
394 mm - RH & LH 7000, 7010 RE67850
394 mm - RH & LH 8000 RE67851EPDC
W = Width
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 20
DELUXE TURNABLE FRONT FENDERS - FIELD INSTALLATION KITSKits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remark Order through
W 480 mm - RH & LH 7020 RE211530 7020: up to serial no. 032704
W 480 mm - RH & LH 7020, 7030 RE238910 7020: from serial no. 032705
W 620 mm - RH & LH 7020 RE211529 7020: up to serial no. 032704
W 620 mm - RH & LH 7020, 7030 RE238909 7020: from serial no. 032705
CompleteGoods /JDMINT
W 480 mm - RH & LH 8020 RE188512 8020: up to serial no. 015456
W 480 mm - RH & LH 8020, 8030 RE236666 8020. from serial no. 0154578030: up to serial no. 007241
W 480 mm - RH & LH8030, 8R
with 1300 SeriesMFWD front axle only
RE260608 8030: from serial no. 007242
W 480 mm - RH & LH8030, 8R
with 1500 SeriesMFWD front axle only
RE308214
W 480 mm - RH & LH 8020, 8030, 8Rwith ILS*) only
RE236667
CompleteGoods /JDMINT
W 620 mm - RH & LH 8020 RE188513 8020: up to serial no. 027762
W 620 mm - RH & LH 8020, 8030 RE236669 8020: from serial no. 0277638030: up to serial no. 007241
W 620 mm - RH & LH8030, 8R
with 1300 SeriesMFWD axle only
RE260609 8030: from serial no. 007242
CompleteGoods /JDMINT
W 620 mm - RH & LH8030, 8R
with 1500 SeriesMFWD front axle only
RE308215 CompleteGoods /
*) ILS = Independent Link Suspension; W = Width
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 21
REAR FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark Order through
RH 7000 R110834
LH 7000 R110835EPDC
RH 7010 R131968
LH 7010 R131969 without remote PTO
LH 7010 R176979 with remote PTO
EPDC
RH 8000 R111888
LH 8000 R111887up to serial no. 009999
RH 8000, 8010 R131966
LH 8000, 8010 R131967from serial no. 010000
EPDC
RH - without fender extension installed 7020, 7030,8020, 8030 R162233
LH - without fender extension installed 7020, 7030,8020, 8030 R162234
EPDC
RH - with fender side extension installed(2.50 m width)
7020, 7030,8020, 8030 R163025
LH - with fender side extension installed(2.50 m width)
7020, 7030,8020, 8030 R163026
EPDC
RH - without fender extension installed 8R R261776
LH - without fender extension installed 8R R261771EPDC
RH - with fender side extension installed(2.50 m width) 8R R261777
LH - with fender side extension installed(2.50 m width)
8R R261772EPDC
Rear fender
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 22
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark Order through
RH 7000 R114745
LH 7000 R106378EPDC
RH 8000 R122008
LH 8000 R122007up to serial no. 009999 EPDC
RH - 2.30 m width 7010, 8000, 8010 R130503
LH - 2.30 m width 7010, 8000, 8010 R130504
RH - 2.50 m width 7010, 8000, 8010 R130505
LH - 2.50 m width 7010, 8000, 8010 R130506
from serial no. 010000 EPDC
RH - 2.50 m width 7020, 8020, 8030 R162235
LH - 2.50 m width 7020, 8020, 8030 R162236EPDC
RH 7030 R237642
LH 7030 R237645EPDC
RH 8R R274563
LH 8R R274562EPDC
RH 8R R282099
LH 8R R282098
with pre-drilled holes forattaching the extra width
extensions R274564, R274565EPDC
REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KITSKits include side extensions (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remark Order through
7020, 8020, 8030 RE210326 includes side extensionsR162235, R162236
7030 RE253151 includes side extensionsR237642, R237645RH & LH - 2.50 m width
8R RE293506 includes side extensionsR274563, R274562
Complete Goods /JDMINT
Rear fender side extension (2.50 m width)7030 Series shown Rear fender side extension
(2.50 m width) - 7010 Series shown
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 23
ADDITIONAL REAR FENDER SIDE EXTENSIONS / EXTRA WIDE - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark Order through
7030, 8030 R233543B - extra wide - RH2.75 m width
8R R274565
7030, 8030 R233544B - extra wide - LH2.75 m width
8R R274564
The additional side extensions B canonly be installed in combination with
side extensions A (see photo above).
If total vehicle width exceeds 2.55 m,extremity lighting is required (also
depending on national regulations).
Please check the corresponding
EPDC
ADDITIONAL REAR FENDER SIDE EXTENSIONS / EXTRA WIDE - FIELD INSTALLATIONKit includes additional side extensions (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remark Order through
7030, 8030 RE253154
B - extra wide - RH & LH2.75 m width
8R RE293505
The additional side extensions B canonly be installed in combination with
side extensions A (see photo above).
If total vehicle width exceeds 2.55 m,extremity lighting is required (also
depending on national regulations).
Please check the correspondingparts catalogue for more details.
EPDC
B - Additionalfender sideextension -
extra wide (2.75 m)
A - Fender sideextension (2.50 m)
John Deere Werke Mannheim - Parts Marketing - EAME Edition - Status 05-2010 24
MUD GUARDS FOR STEPS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Order through
Mud guard - RH 7020, 7030, 8030 RE205744
7020, 7030, 8030 RE205743Mud guard - LH
8R RE307601
EPDC
MUD GUARD FOR STEPS - FIELD INSTALLATION KITKit includes mud guard (LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Order through
7020, 7030 RE215510 Complete Goods /JDMINTMud guard for LH step
8R RE267353 EPDC
MUD FLAP FOR REAR FENDERS - INDIVIDUAL PARTSAdditional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Order through
Mud flap - RH R118067
Mud flap - LH7000, 7010
R118068EPDC