Economical pocket type dust collector with manual shaker cleaning

Superior technology generating substantial operating savings

AQC Dust collecting systems

• (95to99%@5-10 microns)efficiency pockettypefilter

• Economicaland easytoinstall

• Upto5000CFM capacity

• Variousapplications

nancefree

• Idealforsmallshops andtrainingcenters

(wooddusts,metal,plastics,composites)

• Virtuallymainte-

Maxiply Economical pocket type dust collector with manual shaker cleaningBased on the MaxiViBE design, the Maxiply is more economical since it does not need an enclosed cabinet and the cleaning system is performed by manually shaking the filter envelope. The (95 to 99% @ 5-10 microns) efficiency filter pocket envelope allows clean air to be recycled back into the premises for maximum energy savings. primarily developed for interior installation in small shops and vocational schools, its use is per-fect for medium to large size pollutants such as sawdust, grinding, buffing or sanding of different metals, powders and compo sites. air volume capacity can vary from 500 CFM to 5000 CFM. The satin interior coated filter helps to minimize dust caking on filter surface. The angled hopper ensures cons tant sliding of pollutants into the dust storage drum. The support structure can be easily dismantled for relo cation into another part of the facility using the unit or for a new installation in a room with limited size doorways.

A Leading-Edge, High-Performance CompanyAQC’s strength lies in its innovative products designed and developed to generate substantial savings throughout their entire operating life.

AQC is renowned for its technological innovation, safe and sophisticated equipment design, as well as its robust and precise product manufacturing. For example, the unique design of the baffles inside AQC dust collectors makes filter cleaning easy. The AQC cartridge holder design provides maximum filter surface and enhanced filter performance. The ultra-smooth concept inside AQC fume arms makes them maintenance-free.

In short, AQC equipment is designed and built to generate substantial operating savings in terms of time, money and energy. This translates to major reductions in operating costs – from 10 to 20% – throughout the equip-ment’s service life. This scale of savings can represent a significant portion of the equipment’s total purchase price. Companies looking to maximize their profitability should factor in these savings when purchasing equipment.

The unique design and manufacturing of AQC equipment generates significant savings for various reasons:

• Substantialincreaseinthedurationoffilters.

• Lowerenergyconsumptionduringyearsofuse.

• Significantlylessmaintenance(easytoclean,robustmanufacturing, a minimum number of more reliable and durable parts).

• Reducedoperatingcosts(lessfrequentoverhauls,lackof or minimum down time, etc.).

• Loweradministrativecosts(coordination,follow-ups,supervision) due to much less frequent breakdowns.

• Safedesigncanpreventseriousorevenfatalaccidents.

• Increasedcomfortandproductivityofpersonnel.

Equipment acquisition cost

Equipment operating cost* : energy, filters, maintenance, overhauls, repairs, breakdowns…

Equipmenttotal cost

The acquisition cost is just one part of the equation. It’s the total cost including the operating cost *throughout the life cycle of the equipment that must be kept low. This is what AQC delivers. The advanced technology, design, robustness, durability and safety of AQC products generate major savings during the equipment’s entire life cycle.

Dust collecting systems

3

Fume Arms

MAXIPLY efficient dust filtration with economy in mind

• Auniqueinexpensivesolutionforsolidparticlefiltration

• Efficiencycombinedwitheaseofuse

• Minimumdustcakingonfilter

• Idealforschoolsandsmallshops

• (95to99%@5-10microns)efficiencyfilterpocketenvelope

• Directdriveblower.Nopulleyadjustement

• Upto5000CFMwithlowtomediumstaticpressure

• Filtercleaningbymanualshakermechanism

Pocket type dust collector with manual shaker cleaning

Note : ideal for capture and filtration of wood dusts, plastic shavings, non reactive metal sanding and buffing, composites shops*.

*RefertoNFPArequirementsinpage7ofthisleaflet.

Typical applications for the MAXIPLY

• Smalltomediumsizewoodshops,cabineterymaking

• Trainingcentersandvocationalschools

• Plasticandcompositesshops

• Nonereactivemetaltransformingfacilities

Outstanding MAXIPLY features

General descriptionTheMAXIPLYdustcollectorsingleinletdesignallowsthemainmanifoldtobeconnectedtomultipledropstowardpickuppoints.Sincenoreturnairductworkordiffusersarerequired,filteredairisrecycledintothefacilitybymeansofthefour(4)opened sides of the pocket filter envelope. The direct drive fan and motor assembly carries the particulates into the angled hopper. Heavy dusts and solids fall into the drum by gravity and finer dusts are pushed into the high efficiency multiple pocket filter envelope. Integrity of the installation is ensured by bolting the support structure on the floor surface. When cleaning the filter is required, the handle is moved rapidly back and forth making a rocking motion on the camshaft thus dislodging the particulates inside the filter. After a few minutes, the decanter effect allows the particulates to fall into the dust storage drum.

Pocket type dust collector with manual shaker cleaning

Extended surface high efficiency pocket filter

Bolted steel structure for easy assembly

Angled hopper for constant dust discharge

Handle grip

Radial blade high pressure impeller

Dust storage drum with grab handles

Direct drive with TEFC motor

Pre-drilled holes for floor anchors

Quick release drum latch

Manual handle for filter cleaning

MAXIPLY general dimensions

Pocket type dust collector with manual shaker cleaning

93 1

/2"

(233

5 m

m)

31 7/8"(795 mm)

" (108

0 m

m)

8/1 34

40 5/8"(1015 mm)

Maxiply DMP-170S

52"(1320 mm)

76"(1930 mm)

92 7

/8"

(232

0 m

m)

44 7/8"(1122 mm)

45 3

/4"

(114

0 m

m)

49 3/4"(1240 mm)

Maxiply DMP-270S

55 3/4"(1420 mm)

91 1/2"(2330 mm)

5Note : width and depth footprint dimensions indicated above are with largest fans available. Actual dimensions with smaller fans will be submitted.

Maximum air capacity Surface of filtration

1700 CFM / 805 L/s 170 sq. ft. / 18 sq. m.

Maximum air capacity Surface of filtration

2700 CFM / 1280 L/s 270 sq. ft. / 25 sq. m.

DMP-270S

DMP-170S

MAXIPLY general dimensions

Pocket type dust collector with manual shaker cleaning

92

7/8"

(232

0 m

m)

44 7/8"(1120 mm)

46 1

/4"

(115

5 m

m)

49 3/4"(1240 mm)

Maxiply DMP-350S

93 1/2"(2440 mm)

55 3/4"(1420 mm)

101

3/8"

(253

5 m

m)

44 7/8"(1120 mm)

45"

(112

5mm

)

49 3/4"(1240 mm)

Maxiply DMP-450S

60 3/4"(1550 mm)

94"(2385 mm)

DMP-350SMaximum air capacity Surface of filtration

3500 CFM / 1665 L/s 350 sq. ft. / 32 sq. m.

DMP-450S Maximum air capacity Surface of filtration

5000 CFM / 2360 L/s 450 sq. ft. / 42 sq. m.

Note : width and depth footprint dimensions indicated above are with largest fans available. Actual dimensions with smaller fans will be submitted.

Technical data

Unit weight (without fan)

Model numbers Weight [lbs] / [kg]

DMP 170S 350 / 160

DMP 270S 425 / 193

DMP 350S 450 / 205

Fan/motor weight

Fan Weight [lbs] / [kg]

2 H.P. 235 / 106

3 H.P. 270 / 122

5 H.P. 365 / 165

7,5 H.P. 450 / 205

10 H.P. 650 / 295

15 H.P. 725 / 330

Pocket type dust collector with manual shaker cleaning

Type of dust F.P.M. / meter per second

Metal dust 4200 / 21

Sawdust (dry) 3800 / 19

Cement dust 7000 / 35

SAFETYNOTES

TheMAXIPLYdustcollectormeetsNFPA664requirementsasperthefollowingcriterias:a) is not used with mixed applications of wood dusts and non reactive metal grinding ;b) is not connected to sanders or abrasive planers with mechanical material feeds ;c) regular daily cleaning ; d)collectorislocatedatleast20feet(6.1meter)fromanymeanofegressorarearoutinelyoccupiedbypersonnel.Aphysicalbarriercan

be used but dust collector may not be completely ‘’boxed’’ into a room ;e)MAXIPLY dust collectors are not designed to collect any potentially reactive dusts such as aluminium, magnesium, tantalum, titanium

andzinconium.MAXIPLYdoesnotmeetNFPA484standard.

CharT 1 CharT 2

CharT 3

H.P. 220 / 1 / 60 208 / 3 / 60 460 / 3 / 60 575 / 3 / 60

2 H.P. 12 6.8 3.4 2.7

3 H.P. 17 9.6 4.8 3.9

5 H.P. 28 15.2 7.6 6.1

7.5 H.P. 40 22 11 9

10 H.P. 50 28 14 11

15 H.P. 68 42 21 17

CharT 4Recommended duct velocities for particulates Amperage draw

Note:otherparticulatevelocitiesmayberequired. RefertoIndustrialVentilationHandbookformoredetails.

Note:allweightsindicatedaboveareforreference only.Slightvariationsmayoccur.

Static pressure & airflow for 7.5, 10 and 15 H.P. fans

CITATS

ERUSSERP

1000470

1500710

2000945

25001180

30001415

35001665

40001890

45002125

45002125

50002360

55002600

60002830

1750 – 7.00

2000 – 8.00

1500 – 6.00

1250 – 5.00

1000 – 4.00

750 – 3.00

500 – 2.00

250 – 1.00

Pa – w.g.

L/sCFM

AIRFLOW7.5 H.P 10 H.P. 15 H.P.

Static pressure & airflow for 2, 3 and 5 H.P. fans

CITATS

ERUSSERP

500235

1000470

1500710

2000945

25001180

30001415

35001665

40001890

45002125

1750 – 7.00

1500 – 6.00

1250 – 5.00

1000 – 4.00

750 – 3.00

500 – 2.00

250 – 1.00

Pa – w.g.

L/sCFM

AIRFLOW2 H.P 3 H.P. 5 H.P.

Note : static pressure and airflow indicated below are for references only. Higher static pressure for transport velocities may be required in different applications. Contact factory for proper fan selection and fan curves.

Create your MAXIPLY specification

1. Dust collector should include

A bolted and welded steel support structure with cross braces for reinforcement with primer coat and polyurethane finish coat, hopper for proper dust discharge into collector bin, 25 gallon gasketed dust collector bin with grab handles and quick release drum latch, filter envelope interior with satin coat for minimal dust caking, cleaning system should include manual handle connected to camshaft for shaking the filter envelope, fan supports should include pre-drilled fittings for floor anchors, capability of being dismantled for relocation with components to fit through a regular size door frame, fan assembly should be direct drive, aluminum spark proof radial blade, without belts or pulleys with TEFC motor, four (4) opened sides andopened top for air recirculation into the premises, dust deflector at hopper inlet.

2. Dust collector should be model :

170Swith170squarefeetoffilterenvelope

270Swith270squarefeetoffilterenvelope

350Swith350squarefeetoffilterenvelope

450Swith450squarefeetoffilterenvelope

3. Dust collector should include RBE 1750 R.P.M. fan with :

a) 2H.P.motor

b)3H.P.motor

c)5H.P.motor

d)7.5H.P.motor

e)10H.P.motor

f)15H.P.motor

4. Motor voltage should be :

a) 230-1-60

b) 208-3-60

c) 460-3-60

d) 575-3-60

5. Unitshouldincludeanexplosion

proofmotorinlieuofregularTEFCmotor.

6. Unitshouldincludeaspare

replacement filter.

7. Unitshouldinclureaspare

25gallondustbinwithcover.

8. Drumdolleyfordustbin.

9. Manualstarterwithoverloadprotection.

10. Magneticstarterwithoverloadprotection.

11. Explosionproofmagneticstarterwith

overload protection.

660,delaSabliere,Bois-des-Filion(Quebec)CanadaJ6Z4T7

Tel.:1-866-629-4356 •Fax:(450) 621-6677

Website:www.aqcdust.com•e-mail: info@aqcdust.com

To obtain a free copy of our full-colour corporate brochure, please call : 1-866-629-4356

MA

XIP

Y 2

012

Prin

ted

in C

anad

a

Cop

yrig

ht ©

A.Q

.C. I

nc.

ContinuousproductimprovementisapolicyofA.Q.C.Inc.Productfeaturesandspecificationsmaybemodifiedwithoutpriornotice.

YourA.Q.C.representativeis:

Pocket type dust collector with manual shaker cleaning

Note : specifications listed above may be modified to suit application. Contact A.Q.C. or representative for information.