ECLISSE SYNTESIS® COLLECTION · 2018-02-15 · camouflage effect. ECLISSE SYNTESIS® LINE is the...
Transcript of ECLISSE SYNTESIS® COLLECTION · 2018-02-15 · camouflage effect. ECLISSE SYNTESIS® LINE is the...
SLIDING POCKET DOOR SYSTEMS
ECLISSE
SYNTESIS® COLLECTION
ECLISSE— 3 —
Syntesis® Collection
ECLISSE
Syntesis® Collection
SYNTESIS® LINE
SYNTESIS® LUCE
SYNTESIS® LINE BATTENTE
SYNTESIS® TECH
SYNTESIS® BASEBOARD
ECLISSE SYNTESIS® COLLECTION is a new wall surface concept, a new design element that opens up to new and unique expression ways, widely opened to the eloquence of colour, or to the camouflage discretion of white.
ECLISSE SYNTESIS® COLLECTION includes sliding pocket solutions without frames, solutions for hinged doors flush with the wall, and an innovative profile baseboard, offering a complete and modular system for smooth walls.
A new planning idea, sum of different high technologies integrated in the wall, providing techniques and products for the achievement of functional and stunning surfaces.
With ECLISSE SYNTESIS® COLLECTION the space design opens up to new creative directions, in a perfect stylish and linear frame.
/01ECLISSESYNTESIS® LINE
/02ECLISSESYNTESIS® LUCE
ECLISSE— 4 —
/02ECLISSESYNTESIS® LUCE
/03ECLISSESYNTESIS® LINE BATTENTE
/04ECLISSESYNTESIS® TECH
/05ECLISSESYNTESIS® BASEBOARD
/ 01
ECLISSE SYNTESIS® LINE
The pocket system includes elements and technical details that can be pre-rendered or plasterable, allowing the door and the wall to have the same finishing and guaranteeing a perfect camouflage effect.
ECLISSE SYNTESIS® LINE is the sliding pocket door system without jambs and architraves. Thanks to the total integration in the wall and the absence of frames along its perimeter, this system reaches a perfect synthesis between technology and design for a stunning aesthetic result.
ECLISSE— 6 —
Syntesis® Collection ®ECLISSE SYNTESIS | LINE |
®ECLISSE SYNTESIS | LINE |
ECLISSE— 7 —
Syntesis® Collection
TECHNICAL
info
TECHNICAL
info
SOLID WALL
7. Extractable track system (Patented).It is always possible to substitute worn mechanisms and to add accessories.
8. Protruding close plaster mesh(50x25 mm).It joins the counterframe with the wall becoming an integral part of it, thus offering an increasing grasp of the plaster. The finished wall won’t have faults.
9. Stop jamb.Embossed PVC-coated and paintable.
10. Horizontal reinforced bars.12 for the stud wall version (14 for solid wall version) made in 7/10 galvanized steel, with a dovetail form which grant an increased strength to lateral pressures (in order to have an un-deformable internal passage).
11. Alignment bar.As it crosses the pocket door in all its width, it permits to solidly link the frame with the posts, thus making the assembly easier.
2. Horizontal gaskets.These gaskets hide the space between the track and the header. They also allow a better tolerance for installation.
3. Integrated structure.Vertical bars, header and stop bar are pre-coated in the solid wall version and to be filled in the stud wall version; this makes them paintable with the same colour of the wall in which the pocket door will be used.
1. Rear bracket and self-centering door guide system (Italian patent pending). Inserting the door panel is much easier thanks to the combination of the rear bracket (picture A) and the self centering door guide, that does not require to be screwed on the floor (picture B).
3
1
15
12
16
17
6
10
11
2
5
13
74
9
8
14
A
B
ECLISSE— 8 —
Syntesis® Collection ®ECLISSE SYNTESIS | LINE |
TECHNICAL
info
TECHNICAL
info
STUD WALL
12. Frontal stop. It permits the frontal adjustment and offers a better closing.
13. Adjustable rear door stop. It lets you change the door passage size without removing the door panel.
14. Certified runners with ball bearings. They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.
15. Transparent thermoplastic gasket. Completely transparent, it improves the aesthetics of the verticals bars but also the functionality because the door panel leans gently thanks to the resulting air cushion.
16. Template for lock.It offers the possibility to easily install the lock.
17. Under-door profile. It improves the strength and the integrity of the pocket door.
5. Strengthened brackets system.It guarantees linearity and strength.
4. Reinforced joint. It guarantees linearity and a better linkage of track, frame and verticals.
6. Vertical reinforced bars. They improve the strength of the pocket door.
6
5
4
17 1
10
16
15
11
8
3
122
13
7
9
14
ECLISSE— 9 —
Syntesis® Collection ®ECLISSE SYNTESIS | LINE |
20
4020
20
CA B50
FW 10
8 - B
80FW
125 -
B 10
0FW
150
- B 12
0
LPInternal passage54 B= Brick
FW= Finished Wall
C
A B50
H1 HP
LP
FINISHEDFLOOR LEVEL
108 - 125 - 150
H H1HP
TECHNICAL
info
TECHNICALDATA
info
solid wall version stud wall version door panel*standard dimensions
ECLISSE SYNTESIS® LINE
NON-STANDARD MEASURES:Pocket systems with width 600 ÷ 1300 mm and height 1000 ÷ 2700 mm are available (intermediate sizes: 50 mm width, 50 mm height). Width in-between measures (e.g. A= 650 mm) require a made-to-measure door panel.
AVAILABLE ACCESSORIES- ECLISSE SYNTESIS® BASEBOARD- Vitro- ECLISSE BIAS®
- ECLISSE BIAS® DS
NOTES:• The passage A is reduced by 7 mm.• Max door thickness 40 mm (including
any aluminium frames).• With a finished wall thickness of 108
mm use 80 mm brick wall.• With a finished wall thickness of 125
mm use 100 mm brick wall.• With a finished wall thickness of 150
mm use 120 mm brick wall.• Standard door’s weight is 100 kg.* Wooden door panel measures only.
WARNING:• Because of production needs and
safety reasons of the system, ECLISSE expects that the door panel is left protruding by 80 mm.
• If needed, the adjustable door stop allows to modify the real passage size.
• In order to make the door completely disappear, a milling is required.
• The milling for the door guide must have the following dimensions: 7x15 mm.
PASSAGE SIZE OVERALL DIMENSIONS FINISHED WALL OVERALL DIMENSIONS FINISHED WALL
AxH CxH1 B CxH1 B LP HP
600x2000/2100 1378x2060/2160 735 108/125/150 1378x2060/2160 735 100/125/150 615÷635 1992/2092
700x2000/2100 1578x2060/2160 835 108/125/150 1578x2060/2160 835 100/125/150 715÷735 1992/2092
800x2000/2100 1778x2060/2160 935 108/125/150 1778x2060/2160 935 100/125/150 815÷835 1992/2092
900x2000/2100 1978x2060/2160 1035 108/125/150 1978x2060/2160 1035 100/125/150 915÷935 1992/2092
1000x2000/2100 2178x2060/2160 1135 108/125/150 2178x2060/2160 1135 100/125/150 1015÷1035 1992/2092
ECLISSE SYNTESIS® LINE door panel should be routed along the upper profile, as indicated in the picture (except glass doors)
SIZES ARE GIVEN IN mm
SOLID WALL VERSION
Syntesis® Collection
ECLISSE— 10 —
®ECLISSE SYNTESIS | LINE |
20
4020
20
CA BB
S= StudworkFW= Finished Wall
FW 10
0 - S
75FW
125 -
S75
FW 15
0 - S
100
Internal passage54LP
12,5
C
A BB
H1 HP
LP
FINISHEDFLOOR LEVEL
100 - 125 - 150
H H1HP
Syntesis® Collection
TECHNICAL
info
TECHNICALDATA
info
solid wall version stud wall version door panel*standard dimensions
ECLISSE SYNTESIS® LINE DOUBLE
NON-STANDARD MEASURES:Pocket systems with width from 1200 mm to 2600 mm and height from 1000 mm to 2700 mm are available (intermediate sizes: 100 mm width, 50 mm height). Width in-between measures (e.g. A= 1300 mm) require a made-to-measure door panel.AVAILABLE ACCESSORIES- ECLISSE SYNTESIS® BASEBOARD- Vitro- ECLISSE BIAS®
- ECLISSE BIAS® DS
NOTES:• The passage A is reduced by 14 mm.• Max door thickness 40 mm (including any
aluminum frames).• With a finished wall thickness of 100 mm,
use one layer of 12,5 mm plasterboard on each side of the pocket (75 mm stud).
• With a finished wall thickness of 125 mm, use two layers of 12,5 mm plasterboard on each side of the pocket (75 mm stud).
• With a finished wall thickness of 150 mm, use two layers of 12,5 mm plasterboard on each side of the pocket (100 mm stud).
• Standard door’s weight is 100 kg.
* Wooden door panel measures only.WARNING:• Because of production needs and
safety reasons of the system, ECLISSE expects that the door panel is left protruding by 80 mm.
• If needed, the adjustable door stop allows to modify the real passage size.
• In order to make the door completely disappear, a milling is required.
• The milling for the door guide must have the following dimensions: 7x15 mm.
PASSAGE SIZE OVERALL DIMENSIONS FINISHED WALL OVERALL DIMENSIONS FINISHED WALL
AxH CxH1 B CxH1 B LP HP
1200x2000/2100 2656x2060/2160 735 108/125/150 2656x2060/2160 735 100/125/150 615÷635 1992/2092
1400x2000/2100 3056x2060/2160 835 108/125/150 3056x2060/2160 835 100/125/150 715÷735 1992/2092
1600x2000/2100 3456x2060/2160 935 108/125/150 3456x2060/2160 935 100/125/150 815÷835 1992/2092
1800x2000/2100 3856x2060/2160 1035 108/125/150 3856x2060/2160 1035 100/125/150 915÷935 1992/2092
2000x2000/2100 4256x2060/2160 1135 108/125/150 4256x2060/2160 1135 100/125/150 1015÷1035 1992/2092
SYNTESIS® Line door panel should be routed along the upper profile, as indicated in the picture (except glass doors)
SIZES ARE GIVEN IN mm
STUD WALL VERSION
ECLISSE— 11 —
®ECLISSE SYNTESIS | LINE |
®ECLISSE SYNTESIS | LUCE |
/ 02
allow the wall to be extremely homogeneous while hiding the door, and ECLISSE LUCE technology grants the box-frame to be arranged with electric devices. Up to 10 electric boxes per door panel can be installed (5 on a side and 5 on the other).
In the model ECLISSE SYNTESIS® LUCE glass doors can be installed, using the Vitro set.
ECLISSE SYNTESIS® LUCE is the sliding pocket door system without jambs and architraves, combining aesthetic and functionality. Designed to obtain clean lines, this product, thanks to its patented technology, fits out with dimmer controls, switches and sockets into the wall hosting the box-frame. Special constructive details such as integrated structure profiles (pre-rendered or plasterable vertical bars upright and stop jamb)
ECLISSE SYNTESIS® LUCE
ECLISSE— 12 —
Syntesis® Collection
®ECLISSE SYNTESIS | LUCE |
ECLISSE— 13 —
Syntesis® Collection
®ECLISSE SYNTESIS | LUCE |
TECHNICAL
info
TECHNICAL
info
SOLID WALL
2. Horizontal gaskets. These gaskets hide the space between the track and the header. They also allow a better tolerance for installation.
8. Extractable track system (Patented). It is always possible to substitute worn mechanisms and to add accessories.
9. Protruding close plaster mesh (50x25 mm). It joins the counterframe with the wall becoming an integral part of it, thus offering an increasing grasp of the plaster. The finished wall won’t have faults.
10. Stop jamb. Embossed PVC-coated and paintable.
11. Horizontal reinforced bars. 14 for the stud wall version made in 7/10 galvanized steel, with a dovetail form which grant an increased strength to lateral pressures (in order to have an un-deformable internal passage).
12. Alignment bar. As it crosses the pocket door in all its width, it permits to solidly link the pocket with the stop jambs, thus making the assembly easier.
1. Rear bracket and self-centering door guide system (Italian patent pending). Inserting the door panel is much easier thanks to the combination of the rear bracket (picture A) and the self centering door guide, that does not require to be screwed on the floor (picture B).
3. Pre-cut steel. Steel is pre-cut, it’s easy to remove in order to insert electrical boxes. It’s possible to have up to 10 electrical boxes per door (5 on each side).
16
17
18
7
11
12
14
10
9
1
3
13
2
6
84 15
A
B
ECLISSE— 14 —
Syntesis® Collection
TECHNICAL
info
TECHNICAL
info
STUD WALL
13.Frontal stop. It permits the frontal adjustment and offers a better closing.
14. Adjustable rear door stop. Lets you change the door passage size without removing the door panel.
15. Certified runners with ball bearings. They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.
16. Transparent thermoplastic gasket. Completely transparent, it improves the aesthetics of the verticals bars but also the functionality because the door panel leans gently thanks to the resulting air cushion.
17. Template for lock. It offers the possibility to easily install the lock.
18. Under-door profile. It improves the strength and the integrity of the pocket door.
5. Integrated structure. Vertical bars, header and stop bar are pre-coated in the solid wall version and to be filled in the stud wall version; this makes them paintable with the same colour of the wall in which the pocket door will be used.
4. Reinforced joint. It guarantees linearity and a better linkage of track, frame and verticals.
3
5
18 1
1117
16
12
9
1315
2
8
14
10
4
7
6
6. Strengthened brackets System. It guarantees linearity and strength.
7. Vertical reinforced bars. They improve the strength of the pocket door.
ECLISSE— 15 —
Syntesis® Collection ®ECLISSE SYNTESIS | LUCE |
CA B50
FW 15
0 - B
120
Internal passage54
B= BrickFW= Finished Wall
LP
C
A B50
H1
170
100
013
55
1710
64
529
0
HP
LP
FINISHEDFLOOR LEVEL
150
H H1HP
20
4020
20
TECHNICAL
infoinfo
TECHNICALDATA
solid wall version stud wall versionstandard dimensions door panel*
SIZES ARE GIVEN IN mm
PASSAGE SIZE OVERALL DIMENSIONS FINISHED WALL OVERALL DIMENSIONS FINISHED WALL
AxH CxH1 B CxH1 B LP HP
600x2000/2100 1380x2060/2160 737 150 1380x2060/2160 737 150 615÷635 1992/2092
700x2000/2100 1580x2060/2160 837 150 1580x2060/2160 837 150 715÷735 1992/2092
800x2000/2100 1780x2060/2160 937 150 1780x2060/2160 937 150 815÷835 1992/2092
900x2000/2100 1980x2060/2160 1037 150 1980x2060/2160 1037 150 915÷935 1992/2092
1000x2000/2100 2180x2060/2160 1137 150 2180x2060/2160 1137 150 1015÷1035 1992/2092
ECLISSE SYNTESIS® LUCE
SOLID WALL VERSION
NON-STANDARD MEASURES:It’s possible to produce pocket doors with width from 600 mm to 1300 mm and height from 1000 mm to 2700 mm (intermediate sizes: 50 mm width, 50 mm height). Width in-between measures (e.g. A= 650 mm) require a made-to-measure door panel. AVAILABLE ACCESSORIES- ECLISSE SYNTESIS® BASEBOARD- Vitro- ECLISSE BIAS®
- ECLISSE BIAS® DS
NOTES:• The passage A is reduced by 7 mm.• Max door thickness 40 mm (including
any aluminum frames).• With a finished wall thickness of 150
mm use 120 mm brick wall. • Standard door’s weight is 100 kg.* Wood door panel measures only.
WARNING:• Because of production needs and
safety reasons of the system, ECLISSE expects that the door panel is left protruding 80 mm.
• If needed, the adjustable door stop allows to modify the real passage size.
• In order to make the door completely disappear a milling is required.
• The milling for the door guide must have the following dimensions: 7x15 mm.
ECLISSE SYNTESIS® LUCE door panel should be routed along the upper profile, as indicated in the picture (except glass doors)
Syntesis® Collection
ECLISSE— 16 —
®ECLISSE SYNTESIS | LUCE |
CA BB
FW 15
0 - S
100
S= StudworkFW= Finished Wall
LP
12,5
Internal passage54
H1
C
A BB
HP
LP
FINISHEDFLOOR LEVEL
150
H H1HP
170
20
4020
20
TECHNICAL
info
TECHNICALDATA
info
solid wall version stud wall version door panel*standard dimensions
SIZES ARE GIVEN IN mm
PASSAGE SIZE OVERALL DIMENSIONS FINISHED WALL OVERALL DIMENSIONS FINISHED WALL
AxH CxH1 B CxH1 B LP HP
1200x2000/2100 2660x2060/2160 737 150 2660x2060/2160 737 150 615÷635 1992/2092
1400x2000/2100 3060x2060/2160 837 150 3060x2060/2160 837 150 715÷735 1992/2092
1600x2000/2100 3460x2060/2160 937 150 3460x2060/2160 937 150 815÷835 1992/2092
1800x2000/2100 3860x2060/2160 1037 150 3860x2060/2160 1037 150 915÷935 1992/2092
2000x2000/2100 4260x2060/2160 1137 150 4260x2060/2160 1137 150 1015÷1035 1992/2092
ECLISSE SYNTESIS® LUCE DOUBLE
STUD WALL VERSION
NON-STANDARD MEASURES:It’s possible to produce pocket doors with width from 1200 mm to 2600 mm and height from 1000 mm to 2700 mm(intermediate sizes: 100 mm width, 50 mm height). Width in-between measures (e.g. A= 1300 mm) require a made-to-measure door panel.AVAILABLE ACCESSORIES- ECLISSE SYNTESIS® BASEBOARD- Vitro- ECLISSE BIAS®
- ECLISSE BIAS® DS
NOTES:• The passage A is reduced by 14 mm.• Max door thickness 40 mm (including
any aluminum frames).• With a finished wall thickness of 150 mm, use one layer of plasterboard,
(use 2 layers plasterboard with 100 mm stud).
• Standard door’s weight is 100 kg.* Wooden door panel measures only.
WARNING:• Because of production needs and
safety reasons of the system, ECLISSE expects that the door panel is left protruding by 80 mm.
• If needed, the adjustable door stop allows to modify the real passage size.
• In order to make the door completely disappear, a milling is required.
• The milling for the door guide must have the following dimensions: 7x15 mm.
ECLISSE SYNTESIS® LUCE door panel should be routed along the upper profile, as indicated in the picture (except glass doors)
Syntesis® Collection
ECLISSE— 17 —
®ECLISSE SYNTESIS | LUCE |
/ 03
lacquered or decorated with finishing or prints that emphasize them, becoming real design elements.The same aesthetic and structural characteristics are present in the frameless sliding pocket door systems ECLISSE SYNTESIS® LINE and ECLISSE SYNTESIS® LUCE.
Matching both solutions together, sliding and hinged, you can get a perfectly coherent and minimal result.
ECLISSE SYNTESIS® LINE BATTENTE is the ECLISSE solution that allows installing a hinged door flushing with the wall, this means a door with no frame: no jambs, no architraves. The doors can be painted in the same colour of the wall, perfectly hiding from the view, and blending in with the rest of the wall. Alternatively, the door panel can be
ECLISSE SYNTESIS®
LINE BATTENTE
ECLISSE SYNTESIS LINE | BATTENTE |
ECLISSE— 18 —
Syntesis® Collection®
ECLISSE— 19 —
Syntesis® Collection ECLISSE SYNTESIS LINE | BATTENTE |®
TECHNICAL
info
TECHNICAL
info
5. 6 adjustable clamps. The clamps are adjustable for height and prepared to be easily fixed to solid wall.
THE ADVANTAGES:
• UNIQUE frame, for both stud and solid wall.
• Supplied with a plastic protection to avoid dirty and scratches in construction site.
• Door seal applicable on the frame, not on the door. Stable, easy to install, soft and aesthetically pleasant.
• Cover for door hinge to protect hinges from plaster (pull version).
4
4
5
6
7
1
2
3
1. Long lasting and paintable. The aluminium frame is firstly subjected to and anodization treatment against oxidation and then it is primer-coated to facilitate paint cohesion.
6. Trademark. The frame is recognisable thanks to the trademark.
7. Quote 100 mm. It helps the installer finding the “0” quote.
2. Very strong frame. The frame profile weighs about 2 kg/m.
3 . NO cracks! The frame profile is specially designed to avoid cracks.
4 . Spacer panels in OSB 3.25 mm thick and pre-assembled to guarantee a perfect squaring of the frame.
ALUMINIUM FRAME
ECLISSE— 20 —
Syntesis® Collection ECLISSE SYNTESIS LINE | BATTENTE |®
TECHNICAL
info
TECHNICAL
info
y
xz
ECLISSE SYNTESIS® LINE BATTENTE DOOR
THE DOOR:
• Is recognisable thanks to the ECLISSE trademark.
• Has an universal outline adaptable to opening side (right or left).
• Is 45 mm thikness
• Is finished with a border all along the perimeter.
* It comes standard with door panels with H starting from 2000 mm.
THE DOOR. Primer-coated to improve cohesion of wall paint and lacquer (both opaque and glossy) - Full hollow core with double solid wood perimeter to improve inflexibility.
THE MAGNETIC LOCKMagnetic lock.It has modern design and minimal lines; it remains “flush” and guarantees an extraordinary softness while closing.Eccentric strike plate.• Minimal design, it remains “flush”• Eccentric: it allows fixing little installation imperfections, guaranteeing a perfect locking.
Note: it comes standard without lock or lock with key.Turn knob lock on request.
TENSIONING ROD*Special adjustable device. It helps the door panel keeping constant tension, improving the door flatness.
THE HINGES3 Triple adjustable hinges (height, width, depth) for a perfect calibration of the perimeter size.
Note: when the door weighs more than50 kg (max 65 kg), 4 hinges are needed.
ECLISSE— 21 —
Syntesis® Collection ECLISSE SYNTESIS LINE | BATTENTE |®
TECHNICAL
info
TECHNICAL
infoECLISSE SYNTESIS® LINE BATTENTE OPENING
TYPE: CHOOSE THE OPENING - BATTENTE
VERSION: WITH OR WITHOUT HEADER
The distinctive feature of ECLISSE SYNTESIS® LINE BATTENTE is the possibility to install the doors flush with the ceiling with or without a header in order to achieve a total integration among door, wall and ceiling.
With header Without header
PUSH DOOR
ECLISSE SYNTESIS® LINE BATTENTE
Left
Left
Right
Right
PULL DOOR
ECLISSE— 22 —
Syntesis® Collection ECLISSE SYNTESIS LINE | BATTENTE |®
TECHNICAL
info
TECHNICAL
infoECLISSESYNTESIS® LINE BATTENTE OPENING
TYPE: CHOOSE THE OPENING - BATTENTE DOUBLE
VERSION: WITH OR WITHOUT HEADER
ECLISSE SYNTESIS® LINE BATTENTE DOUBLE with header only.
With header
PUSH DOOR LEFT - RIGHT DOOR FIXED
PUSH DOOR RIGHT - LEFT DOOR FIXED
PULL DOOR LEFT - RIGHT DOOR FIXED
PULL DOOR RIGHT - LEFT DOOR FIXED
ECLISSE SYNTESIS® LINE BATTENTE DOUBLE
ECLISSE SYNTESIS® LINE BATTENTE DOUBLE
• on ECLISSE SYNTESIS® LINE BATTENTE DOUBLE the fixed door closes with latch (supplied as standard).
ECLISSE— 23 —
Syntesis® Collection ECLISSE SYNTESIS LINE | BATTENTE |®
TECHNICAL
info
TECHNICAL
info
TECHNICALDATA
info
SINGLE ELEMENTS
HARDWARE
DOOR-CLOSER
THE COMPLETE KIT
ACCESSORIES
The complete KIT supply includes frame structure(in kit or assembled), door and hardware.
(Only for ECLISSE SYNTESIS® LINE BATTENTE SINGLE)
Hardware includes a door seal, a lock, a strike plate, 3 hinges, 3 covers for door hinge and a screw bag.
Invisible from the outside, the door-closer is available in four variants: with stopping, without stopping, right, left. The application of door-closer requires a special processing on the frame and the door panel that has to be specified when ordering.
Door seal, length 6,6 m, to be cut to reqd. length.
Lock
Door-closer
BOTTOM VIEW Detail of the arm applied on the upper beam of the frame.
VIEW FROM ABOVE Detail of the door-closer recessed into the door panel
Hinges Cover for door hinge
Screw bag
Eccentric strike plate=HARDWARE
SUPPLY METHODS
OR HARDWARE HARDWARE
ECLISSESYNTESIS® LINE BATTENTE OPENING
Syntesis® Collection
ECLISSE— 24 —
ECLISSE SYNTESIS LINE | BATTENTE |®
TECHNICAL
info
TECHNICAL
info
TECHNICALDATA
info
125/150
75/100
125/150
75/100
46
353535 35
4646 46
82,5
87,5
87,5
87,5
87,5
82,5
82,5
82,5
100 75
2727
27
100 50
27
100 50 100 75
464646
46
125/150
75/100
125/150
75/100
46
353535 35
4646 4682,5
87,5
87,5
87,5
87,5
82,5
82,5
82,5
100 75
2727
27
100 50
27
100 50 100 75
464646
46
125/150
75/100
125/150
75/100
46
353535 35
4646 46
82,5
87,5
87,5
87,5
87,5
82,5
82,5
82,5
100 75
2727
27
100 50
27
100 50 100 75
464646
46
125/150
75/100
125/150
75/100
46
353535 35
4646 46
82,5
87,5
87,5
87,5
87,5
82,5
82,5
82,5
100 75
2727
27
100 50
27
100 50 100 75
464646
46
Frame on solid wall
Frame on solid wall with one plasterboardFinished wall thickness 100 mm
Frame on stud wall with two plasterboardsFinished wall thickness 100 mm
Frame on stud wall with two plasterboardsFinished wall thickness 125/150 mm
125/150
75/100
125/150
75/100
46
353535 35
4646 46
82,5
87,5
87,5
87,5
87,5
82,5
82,5
82,5
100 75
2727
27
100 50
27
100 50 100 75
464646
46
125/150
75/100
125/150
75/100
46
353535 35
4646 46
82,5
87,5
87,5
87,5
87,5
82,5
82,5
82,5
100 75
2727
27100 50
27
100 50 100 75
464646
46
125/150
75/100
125/150
75/100
46
353535 35
4646 46
82,5
87,5
87,5
87,5
87,5
82,5
82,5
82,5
100 75
2727
27
100 50
27
100 50 100 75
464646
46
125/150
75/100
125/150
75/100
46
353535 35
4646 46
82,5
87,5
87,5
87,5
87,5
82,5
82,5
82,5
100 75
2727
27
100 50
27
100 50 100 75
464646
46
Frame on solid wall
Frame on solid wall with one plasterboardFinished wall thickness 100 mm
Frame on stud wall with two plasterboardsFinished wall thickness 100 mm
Frame on stud wall with two plasterboardsFinished wall thickness 125/150 mm
PUSH DOOR PULL DOOR
The frame fits both with stud and solid wall. For solid wall 6 clamps are cemented in the special spaces created in the wall. For stud wall the frame is fixed with screws to the metal structure through the existing holes.
Anchor clampAnchor clamp
ECLISSE SYNTESIS® LINE BATTENTE OPENING
Syntesis® Collection
ECLISSE— 25 —
ECLISSE SYNTESIS LINE | BATTENTE |®
PORTA A TIRAREMURATURA H1HHP H=H1 HP
H=H1 HPHP H1HPORTA A SPINGERE
MURATURA
PORTA A TIRARECARTONGESSO H1HHP H=H1 HP
PORTA A SPINGERECARTONGESSO
H1HPH H=H1 HP
LP
LC
LP
LC
C
LP
L
C
LP
L
PORTA A TIRAREMURATURA H1HHP H=H1 HP
H=H1 HPHP H1HPORTA A SPINGERE
MURATURA
PORTA A TIRARECARTONGESSO H1HHP H=H1 HP
PORTA A SPINGERECARTONGESSO
H1HPH H=H1 HP
LP
LC
LP
LC
C
LP
L
C
LP
L
FINISHED CEILING
FINISHED CEILING
FINISHED CEILING
FINISHED CEILING
PUSH DOOR
PULL DOOR
FINISHED FLOOR
FINISHED FLOOR
FINISHED FLOOR
FINISHED FLOOR
TECHNICAL
info
TECHNICALDATA
info
FRAME WITHOUT HEADER
PASSAGE SIZE OVERALL DIMENSIONS DOOR PANEL 45 mm thick PASSAGE SIZE OVERALL DIMENSIONS DOOR PANEL 45 mm thick
L H C H1 LP HP L H C H1 LP HP600 2100/2400 692 2146/2446 616 2104/2404 600 2700 692 2700 616 2693
650 2100/2400 742 2146/2446 666 2104/2404 650 2700 742 2700 666 2693
700 2100/2400 792 2146/2446 716 2104/2404 700 2700 792 2700 716 2693
750 2100/2400 842 2146/2446 766 2104/2404 750 2700 842 2700 766 2693
800 2100/2400 892 2146/2446 816 2104/2404 800 2700 892 2700 816 2693
850 2100/2400 942 2146/2446 866 2104/2404 850 2700 942 2700 866 2693
900 2100/2400 992 2146/2446 916 2104/2404 900 2700 992 2700 916 2693
950 2100/2400 1042 2146/2446 966 2104/2404 950 2700 1042 2700 966 2693
1000 2100/2400 1092 2146/2446 1016 2104/2404 1000 2700 1092 2700 1016 2693
• Intervals for height every 50 mm, from 1650 mm to 2700 mm.
• Variations in H can be realized in centimeters in the version without header.
• Version with header: height overall dimension is always higher than 46 mm compared to height size H.
• Version with header: it’s possible to have a variation with height overall dimension 2700 mm and passage size 2654 mm.
FRAME WITH HEADER
FRAME WITH HEADER
FRAME WITH HEADER
FRAME WITHOUT HEADER
FRAME WITHOUT HEADER
ECLISSESYNTESIS® LINE BATTENTE SIZES
SIZES ARE GIVEN IN mm
Syntesis® Collection
ECLISSE— 26 —
ECLISSE SYNTESIS LINE | BATTENTE |®
TECHNICAL
info
TECHNICALDATA
infoECLISSESYNTESIS® LINE BATTENTE APPLICATIONS
• Intervals for height every 50 mm, from 1650 mm to 2700 mm.
• Height overall dimension is always higher than 46 mm compared to height size H.
• It’s possible to have a variation with height overall dimension 2700 mm and passage size 2654 mm.
FRAME WITH HEADER - PUSH
FRAME WITH HEADER - PULL
HP H1H
LC
LP2LP1
LC
LP2LP1
H1HHPC
L
LP2LP1
C
L
LP2LP1
FINISHED CEILING
FINISHED CEILING
FINISHED FLOOR
FINISHED FLOOR
PASSAGE SIZE OVERALL DIMENSIONS DOOR PANEL 45 mm thick
L H C H1 LP1 LP2 HP1200 2100/2400 1292 2146/2446 606 616 2104/2404
1300 2100/2400 1392 2146/2446 656 666 2104/2404
1400 2100/2400 1492 2146/2446 706 716 2104/2404
1500 2100/2400 1592 2146/2446 756 766 2104/2404
1600 2100/2400 1692 2146/2446 806 816 2104/2404
1700 2100/2400 1792 2146/2446 856 866 2104/2404
1800 2100/2400 1892 2146/2446 906 916 2104/2404
1900 2100/2400 1992 2146/2446 956 966 2104/2404
2000 2100/2400 2092 2146/2446 1006 1016 2104/2404
FRAME WITH HEADER
SIZES ARE GIVEN IN mm
Syntesis® Collection
ECLISSE— 27 —
ECLISSE SYNTESIS LINE | BATTENTE |®
®ECLISSE SYNTESIS | TECH |
/ 04
ECLISSE SYNTESIS® TECH is the solution which completes the Syntesis® Collection and allows service compartments to be limited in size.Cables, tubes, elec tr ical sys tems and even s tore cupboards c an now be concealed and discreetly integrated into the wall.With ECLISSE SYNTESIS® TECH, the appearance of the wall is the same and the technical compartments are
accessible only when needed, through handy push-pull openings.Lever handles or key- locks are ava i lab le on reques t . Customisable with any type of single, double, up-and-over or extractable door, ECLISSE SYNTESIS® TECH allows any niche, element or equipment
which we would rather not see to be concealed, leaving them accessible to inspection for maintenance and repair work.
ECLISSE SYNTESIS® TECH
ECLISSE— 28 —
Syntesis® Collection
®ECLISSE SYNTESIS | TECH |
ECLISSE— 29 —
Syntesis® Collection
ECLISSE— 29 —
TECHNICAL
info
Up-and-over door versionwith opening downwards
EXAMPLE APPLICATIONS OF THE ECLISSE SYNTESIS® TECH SYSTEM
ECLISSE SYNTESIS® TECH
Up-and-over door versionwith opening upwards
Extractable door version
One-door versionwith right-side opening
Two-door version
Side hung versionwith opening on the right
ECLISSE— 30 —
Syntesis® Collection ®ECLISSE SYNTESIS | TECH |
21 70
55 62
82
38 44 Push-Pull Hinge
TECHNICAL
info
ECLISSE SYNTESIS® TECH APPLICATIONS
ADVANTAGES
OVERALL DIMENSIONS
• Long lasting and paintable frame The whole frame and locks/hinge mounting brackets
are made of anodized anti-corrosion aluminum, coated with primer and ready for painting in the same colour of the wall. A continuous uniform surface means a consistent surface finish, both inside and outside.
• Designed for the installer The reduced size of the frame is designed in order to
push through comfortably with wiring and piping on all 4 sides.
• Sturdy frame Like all other Syntesis Collection products, ECLISSE
SYNTESIS® TECH is sturdy and easy to assemble.
• No cracks! The frame profile is designed in order to fully
integrate into the wall, avoiding the formation of cracks along the perimeter of the compartment.
• Universal Only one frame for both solid wall and stud wall. Metal supports to fix the frame to the metal wrapping
and the wall structure available as standard.
• Door panel Syntesis Tech comes complete with frame and door
panel. 18 mm panel thickness are melamine faced chipboard Class E1, melamine coated in white and edged in ABS, ready to be painted.
• 165° hinges as standard Perfect accessibility thanks to special 165° opening
hinges, mounted as standard. Hinges also can be adjusted on three axes to ensure a perfect aesthetic result.
ECLISSE— 31 —
Syntesis® Collection®ECLISSE SYNTESIS | TECH |
L
CHH1
28
26,5
44
82
28
26,5
44
82
28
26,5
44
82OVERALL DIMENSIONS
C = L + 53 mm
H1 = H + 53 mm
DIMENSIONS
APPLICATIONS
ECLISSE SYNTESIS® TECH DIMENSIONS TECHNICALDATA
info
FRAME ON PLASTERED WALL
FRAME ON STUD WALL WITH A SINGLE PLASTERBOARD
FRAME ON STUD WALL WITH TWO PLASTERBOARDS
ECLISSE— 32 —
Syntesis® Collection ®ECLISSE SYNTESIS | TECH |
SINGLE DOOR
TOP HUNG PANEL
BOTTOM HINGED PANEL
REMOVABLE PANEL
DOUBLE DOOR
PASSAGE SIZE OVERALL DIMENSIONS
L H C H1min max min max min max min max
300 ÷ 600 300 ÷ 1600 353 ÷ 653 353 ÷ 1653
SIZES ARE GIVEN IN mm
PASSAGE SIZE OVERALL DIMENSIONS
L H C H1min max min max min max min max
300 ÷ 1600 300 ÷ 600 353 ÷ 1653 353 ÷ 653
SIZES ARE GIVEN IN mm
PASSAGE SIZE OVERALL DIMENSIONS
L H C H1min max min max min max min max
300 ÷ 1600 300 ÷ 600 353 ÷ 1653 353 ÷ 653
SIZES ARE GIVEN IN mm
PASSAGE SIZE OVERALL DIMENSIONS
L H C H1min max min max min max min max
300 ÷ 1600 300 ÷ 600 353 ÷ 1653 353 ÷ 653
SIZES ARE GIVEN IN mm
PASSAGE SIZE OVERALL DIMENSIONS
L H C H1min max min max min max min max
600 ÷ 1000 300 ÷ 1600 653 ÷ 1053 353 ÷ 1653(300+300 ÷ 500+500)
SIZES ARE GIVEN IN mm
ECLISSE SYNTESIS® TECH VERSIONS TECHNICALDATA
info
• A single frame for right-side or left-side opening.
• Useful space between hinge and lock around 100 mm less than the passage size.
• Useful space between hinge and lock around 150 mm less than the passage size.
• Not available with key-lock.
• Supplied with an hold open device as standard.
• Useful space between hinge and lock around 100 mm less than the passage size.
• Supplied with safety chain as standard.
• Useful space between hinge and lock around 100 mm less than the passage size.
• Supplied with safety chain as standard.
ECLISSE— 33 —
Syntesis® Collection®ECLISSE SYNTESIS | TECH |
The ECLISSE SYNTESIS® BASEBOARD (skirting) is an innovative idea for decorating house spaces in an elegant, minimal and modern way. Unlike the traditional baseboard, this “flush with wall” version runs along the wall without protruding. In this way the furniture can be placed directly on the wall, without remodelling the baseboard.
This solution is possible by predisposinga hollow for the baseboard and placing the special aluminum profiles while creating the wall structure, before laying the floor.The harmonious combination of ECLISSE SYNTESIS®
BASEBOARD is realized by matching it with the other SYNTESIS®
COLLECTION models.
ECLISSE SYNTESIS® BASEBOARD
/ 05ECLISSE— 34 —
Syntesis® Collection ®ECLISSE SYNTESIS | BASEBOARD |
ECLISSE— 35 —
Syntesis® Collection ®ECLISSE SYNTESIS | BASEBOARD |
TECHNICAL
info
TECHNICAL
info
C
A BD
E
C
A BD
C
A B
9
4
5625
2~
0
12,512,5
15
9,5
582
60
10
0
85
15
0
9,5
582
60
12,5
15
9,558
260
0
85
9
4
5625
2~
0
12,512,5
15
9,5
582
60
10
0
85
15
0
9,5
582
60
12,5
15
9,5
582
60
0
85
9
4
5625
2~
0
12,512,5
15
9,5
582
60
10
0
85
15
0
9,5
582
60
12,5
15
9,5
582
60
0
85
ECLISSE SYNTESIS® BASEBOARD
TECHNICAL FEATURES
LINEAR PROFILES
JOINTS FOR CONNECTING THE PROFILES
• The profiles fit with the insertion of standard baseboards (height 60 mm); for higher baseboards it’s sufficient to place the profiles over the zero quote.
• The aluminium profiles have a triple chamber structure that assures robustness and allows a perfect union between the two profiles through the special joints.
• To fix the profiles to a solid wall, a structural sealing adhesive is needed; stud wall version: the profiles, especially perforated, are fixed with
screws.
The baseboard is provided in bars of 2000 mm length.
Useful space in height for the baseboard: 58 mm
Baseboard installed on solid wall
Baseboard installedon stud wall
(single plasterboard)
Baseboard installedon stud wall
(double plasterboard)
JOINT FOR STEPS
JOINT FOR INTERNAL CORNER
JOINT FOR EXTERNAL CORNER
LINEAR JOINT
BA
C
®ECLISSE SYNTESIS | BASEBOARD |
ECLISSE— 36 —
Syntesis® Collection
TECHNICAL
info
TECHNICAL
info
C
A BD
E
C
A BD
C
A B
C
A BD
E
C
A BD
C
A B
ECLISSE SYNTESIS® BASEBOARD
TERMINAL PROFILES FOR ECLISSE SYNTESIS® LINE AND ECLISSE SYNTESIS® LUCE
LED APPLICATION (not provided)
ECLISSE SYNTESIS® BASEBOARD DECORATED ALKORCELL®
A package contains 4 terminal profiles needed for every ECLISSE SYNTESIS® LINE or ECLISSE SYNTESIS® LUCE.
Profiles length: 160 mm
Traditional baseboard ECLISSE SYNTESIS® BASEBOARD
TERMINAL PROFILES FOR ECLISSE SYNTESIS® LINE BATTENTE
A package contains 4 terminal profiles needed for every ECLISSE SYNTESIS® LINE BATTENTE.
Profiles length: 160 mm
The Alkorcell ECLISSE SYNTESIS® BASEBOARD is available in the brushed white or brushed grey colours.
ECLISSE SYNTESIS® BASEBOARD can function as a step mark backlit with led.
• The baseboard (skirting) must be milled on the top of the rear side: height 25 mm, depth 4 mm (see picture).
• Fix the LED stripe on the back side of the milling (see picture).
• The baseboard height must be reduced around 2 mm to allow the light to pass.
Traditional baseboard ECLISSE SYNTESIS® BASEBOARD
9
4
5625
2~
0
12,512,5
15
9,5
582
60
10
0
85
15
0
9,5
582
60
12,5
15
9,5
582
60
0
85 LED stripe
ALKORCELL® DECORATEDBRUSHED WHITE
ALKORCELL® DECORATEDBRUSHED GREY
ECLISSE— 37 —
Syntesis® Collection ®ECLISSE SYNTESIS | BASEBOARD |
The accessories designed for SYNTESIS® COLLECTION have to satisfy an innovative product that needs to be integrated at best with solutions able to dialogue with the minimalism of its forms.Exclusive finishing such as glass doors with lacquered details reinterpret the concept of door, converting it to an integral part of the furniture.
Design becomes concrete through systems that adapt the doors to the frame, matching the linear forms of SYNTESIS® COLLECTION, and it turns into pure innovation when applying soft closer for sliding doors.The lock kits are functional
solutions that simplify everyday life.
FINISHING AND ACCESSORIES
ECLISSE— 38 —
Syntesis® Collection | FINISHING AND ACCESSORIES |
ECLISSE— 39 —ECLISSE— 39 —
Syntesis® Collection | FINISHING AND ACCESSORIES |
info
PRIMER COATED DOORS
DOORS
FINISHINGS
The untreated with primer door panels, either sliding or hinged, are ready to be finished with wallpaper, varnish or paintings of the same colour as the wall.
PRIMER COATED
| FINISHING AND ACCESSORIES |
ECLISSE— 40 —
Syntesis® Collection
infoDOORS
FINISHINGS
LACQUERED AND DECORATED DOORS
The sliding or hinged door panels are available in the opaque lacquered version in all the RAL colour samples.
ECLISSE SYNTESIS® LINE door panels for sliding system with H starting from 2300 mm and ECLISSE SYNTESIS® LINE door panels for flush door with H starting from 2000 mm comes standard with the tensioning rod.
ECLISSE SYNTESIS® solutions are perfect for hiding walk-in closets and utility rooms.
OPAQUE RAL LACQUERED ALKORCELL® DECORATEDBRUSHED WHITE
ALKORCELL® DECORATEDBRUSHED GREY
| FINISHING AND ACCESSORIES |
ECLISSE— 41 —
Syntesis® Collection
infoGLASS DOOR
GLASS DOOR
The decorations for glass doors are completely hand made, therefore each door is unique.With the hand-crafted glass doors you will have an exclusive piece which is different from every other one.
ECLISSE offers new lines in all-glass doors: RV, Aree, Flores, Opere and Colors.The new lines of glass doors like Aree and Flores are made with 10 mm thick toughened glass with a transparent or satin base.The base can be decorated on one side by using an engraving process (sandblasting) and/or glass fused applications. Sandblasted patterns are available also on transparent, antique colour base (this option is not available for decorative applications with fused glass).Opere are hand-painted doors on a transparent or satin-finish base inspired by famous works of art.On the other hand, Colors doors are available in two versions: either on a base made up of two 5 mm laminated toughened glass sheets with inner mono-coating paint or on a 10 mm toughened glass sheet painted with satin finish on one side. Both versions are available in a wide range of colours.
The glass sliding doors are equipped with a special transparent door guide and brackets for fastening them to the ECLISSE sliding system. The doors may be completed with special handles or with a specific lock kit in satin chrome brass. All glasses are in compliance with current regulations regarding their usage in private and public building (UNI 7142 and UNI 7697 standards).
AREE
OPERE COLORS
FLORES
| FINISHING AND ACCESSORIES |
ECLISSE— 42 —
Syntesis® Collection
ECLISSE— 42 —
info
GLASS DOORS WITH REDUCED EDGING FOR SLIDING DOOR ECLISSE SYNTESIS® LINE AND ECLISSE SYNTESIS® LUCE
FINISHINGS
HANDLES
MYRTAVÉRA
The all-glass ECLISSE doors in the finishes shown below are supplied with a special aluminium edging with a decidedly minimalist design.Thanks to its small area (30 mm) it is barely visible.
STANDARD HANDLES PAIR OF LARGE HANDLES NISÍ
TRASPARENT
TRASPARENT SMOKED
COVERING EFFECT COLOURS
TRANSPARENTWITH DECORATION
TRASPARENT SMOKED WITH DECORATION
SATIN EFFECT COLOURS
SATIN FINISH
SATIN FINISH SMOKED
SILVER MIRROR
SATIN FINISHWITH DECORATION
SATIN FINISH SMOKEDWITH DECORATION
HAND PAINTED
GLASS DOOR WITH REDUCED EDGING
| FINISHING AND ACCESSORIES |
ECLISSE— 43 —
Syntesis® Collection
LOCK KITSinfo
ECLISSE SYNTESIS® LINE - ECLISSE SYNTESIS® LUCE
SYNTESIS® TECH
ECLISSE SYNTESIS® LINE BATTENTE
HANDLE
PUSH&PULL ROUNDED HANDLE PUSH&PULL SQUARE HANDLE
KIT WITHOUT LOCK HANDLE WITH KEY KIT WITH LOCK AND THUMB TURN
HANDLE WITH KEY HANDLE WITH TURN KNOB
CASSIOPEA SLIDING
CASSIOPEA BATTENTE
DOOR PULL HANDLE
KEY LOCKHANDLE WITH LEVERPUSH&PULL STANDARD EQUIPMENT
| FINISHING AND ACCESSORIES |
ECLISSE— 44 —ECLISSE— 44 —
Syntesis® Collection
infoECLISSE SYNTESIS® PLUS
ECLISSE BIAS®, Built In Anti Slam is the damper for sliding pocket doors, fully integrated inside the track. Invisible from the outside, It’s equipped with an oil piston that slows and softly accompanies the door in the closing phase. ECLISSE BIAS® is suitable for glass or wooden doors and for every ECLISSE sliding door system.
• Invisible from the outside.
• For glass or wooden doors (ensuring the closure of up to 40 kg panels)
Adaptor for ECLISSE glass doors (equipped as standard with brackets) and for other companies glass doors.
Vitro is composed of:• Stainless steel veil (pic.1)• Stop jamb adapter (pic. 2)• Brush holder made of aluminum coated with paintable PVC.
The veil is available for:• ECLISSE brackets: veil height H = 57 mm• ECLISSE clamps: veil height H = 63 mm
VITRO FOR ECLISSE SYNTESIS ® LINE AND ECLISSE SYNTESIS ® LUCE
ECLISSE BIAS® ECLISSE BIAS® DS
| FINISHING AND ACCESSORIES |
pic. 1 pic. 2
ECLISSE BIAS® DS, Built in Anti Slam Double Side.The bi-directional damper with the incorporated anti-slam,is completely hidden inside the track.Suitable for single and double sliding pocket doors. Invisible from the outside, ECLISSE BIAS® DS slows and softly approaches the door both during the closing as well as the opening into the pocket door.
• It can be installed on door panels up to 100 kg weight, offering a good slowing power.
• Only for door panels with passage widths higher than 700 mm (see installation instructions).
ECLISSE— 45 —
Syntesis® Collection
photoEnrico Dal Zotto
graphiccreativeblend.it
print Scarpis
60101120303/2017
ECLISSE Via Sernaglia, 76 | 31053 Pieve di Soligo TV | T. +39 0438 980 513 | F. +39 0438 837245 | [email protected]
www.eclisseworld.com
© ECLISSE, all rights reserved.-The use, filing and total or partial reproduction, using any mechanical or electronic means, of texts, drawings and pictures contained in this publication is strictly prohibited, unless specifically approved in writing by ECLISSE.All pictures and drawings are for illustrative purposes only. ECLISSE s.r.l. reserves the right to make changes in order to improve the product specifications without notice. We may change the content of this catalogue, so if you have any queries related to the products you can contact our call center. ECLISSE refuses any responsibility for misprints, clerical errors or for any other reason.
+Follow us on
IV E
diti
on
- 0
3/20
17 -
601
0112
03
Via Sernaglia, 76 | 31053 Pieve di Soligo TV | T. +39 0438 985749 | F. +39 0438 837245 | [email protected] | www.eclisseworld.com
Follow us on: