ECETDHA Meeting - Engineering Technology Division … ECETDHA Business Meeting ... Tolerance...
25
ECETDHA Meeting 27 June 2011
Transcript of ECETDHA Meeting - Engineering Technology Division … ECETDHA Business Meeting ... Tolerance...
ECETDHA Meeting
27 June 2011
ECETDHA
ECETDHA Business Meeting • Call to Order (Segalewitz)
• Approval of January 2011 Meeting Minutes (Steffen)
• Treasurers Report (Porter)
• Membership Update (Porter)
• Mini-grant Program (Segalewitz)
• Report on IEEE CTAA Activities (Cooney)
• EET Assessment Exam Update (Hall/Land)
• Four Pillars of Manufacturing Engineering (Mott)
• Nomination/Election of New Officers (Segalewitz)
• Comments for the Good of the Association
• Adjournment
ECETDHA
Treasurer Report JANUARY 26, 2011 – JUNE 15, 2011
BALANCE IN BANK, JANUARY 26, 2010 $ 3,617.65
MEMBERSHIP DUES RECEIVED
March, 2011 $ 385.00
April, 2011 140.00
June, 2011 210.00
Total Dues Received $ 735.00
INTEREST RECEIVED
January, 2011 – May, 2011 $ 4.40
Total Interest Received $ 4.40
TOTAL CASH RECEIVED $ 739.40
TOTAL CASH AVAILABLE $4,357.05
DISBURSEMENTS
4/15/2011 Penn State – Wilkes Barr – Minigrant $ 600.00
6/14/2011 Elaine Cooney – June 2011 IEEE CTA 759.31
TOTAL DISBURSEMENTS $ 1,359.31
CASH ON HAND, JUNE 15, 2011 $ 2,997.74
ECETDHA
Membership History
ECETDHA
Mini-Grant Awards
ECETDHA
Report on IEEE-CTAA Activities
ECETDHA
Four Pillars of Manufacturing Engineering
ECETDHA
Four Pillars of Manufacturing Engineering
ECETDHA
ECETDHA Officers
ECETDHA
Benefits of ECETDHA Membership
• Low cost for institutional membership.
• All faculty from member institutions may participate in Association activities.
• Networking with others engaged in electronic & computer (and related) engineering technology programs.
• Submit proposals for the ECETDHA Mini-Grant program.
• Make recommendations to IEEE Committee on Technology Accreditation Activities (CTAA) for changes to TAC of ABET criteria.
• Provide recommendations and nominations for IEEE TAC program evaluators.
• Influence future development of SME/EET Outcome Assessment tool.
• Access to the EET External Evaluator database (future).
• Participate in the National ET Forum.
ECETDHA
Comments For the Good of the Association
Materials and Manufacturing
Processes
Product, tooling and asseMbly engineering
Manufacturing systeMs and oPerations
Manufacturing coMPetitiveness
Foundation
Mathematics and Science Personal Effectiveness
engineering sciences
Materials
Manufacturing Processes
Product design
Process design
equiPMent/tool design
Production systeM design
autoMated systeMs and control
quality and continuous iMProveMent
Manufacturing ManageMent
the Four Pillars oF ManuFacturing engineering Provides a Model oF FundaMental knowledge required For ManuFacturing Practitioners.
For Further inForMation on the Four Pillars: httP://en.wikiPedia.org/wiki/Four_Pillars_oF_ManuFacturing_engineering
sMe certiFication and outcoMe assessMents:www.sMe.org/cert
the sMe curricula 2015 rePort addresses action oriented recoMMendations
and strategies For education in suPPort oF ManuFacturing:www.c2015.coM
sMe ManuFacturing education and research coMMunity:www.sMe.org/edu
Four Pillars oF ManuFacturing engineeringProduct Producing enterPrise
(Over)
Four Pillars oF ManuFacturing engineeringProduct Producing enterPrise
Customer Focus - Quality & Continuous Improvement - Metrology - SPC - Problem Analysis (FMEA, DOE, etc.) - Capability Analysis - ReliabilitySystems Thinking - Product Design - Manufacturing Processes - Production System Design - Measurement of Process Variables - Process Improvement
Materials and Manufacturing Processes
Engineering SciencesMaterials
Manufacturing Processes
Product, tooling and asseMbly engineering
Product DesignProcess Design
Equipment/Tool Design
Manufacturing systeMs and oPerations
Production System DesignAutomated Systems and Control
Manufacturing coMPetitiveness
Quality Continuous Improvement
Manufacturing Management
Foundation
Mathematics and SciencePhysics, Chemistry, Bio-Science
Algebra, Trigonometry, Analytic Geometry, Calculus, Probability, Statistics
Personal EffectivenessInterpersonal Skills, Negotiating, Conflict Management, Innovation, Creativity, Written and Oral Communication,
Presentation Skills, Lifelong Learning, Knowledge
engineering sciences
Statics and DynamicsMechanics of Materials
Fluid MechanicsThermodynamics/Heat TransferElectrical Circuits/Electronics
Materials
MetalsPlastics/Polymers
CompositesCeramics
FluidsGlasses
NanotechnologyFoamsHybrids
Natural Materials
Manufacturing Processes
Material RemovalFabrication
Hot and Cold FormingCasting and Molding
Electrical/Electronics ManufacturingHeat Treatment
Joining, Welding and Assembly Finishing
Bulk and Continuous FlowMaterial Handling and Packaging
Hand Tool Use & Machine Operating
Product design
Market/Sales/Lifecycle AnalysisIntellectual Property Protection
Design ManagementThermodynamics/Heat TransferSimulation/Engineering Design
Concurrent EngineeringDesign for X (Mfg/Assy/Maint, etc.)
Drawing/Engineering GraphicsCAD/CAM/CAE
Tolerance Analysis/GD&TProduct Liability
Process design
Process Research and DevelopmentSimulation/Process Analysis
Product Prototype Build and TestProcess Development and Test
Print ReadingRapid Prototyping
equiPMent/tool design
Cutting Tool DesignWork Holding Tool Design
Die/Mold DesignGage Design
Machine Design
Production systeM design
Infastructure/Plant LocationFacility Planning/Plant Layout
Processes Planning/DevelopmentCapacity Planning
Product/Mfg System DesignProcess Documentation
Work InstructionsTool and Equipment Selection
Production System Build & TestHuman Factors,
Ergonomics, SafetyMaintenance Systems
Environmental ProtectionWaste Management
autoMated systeMs and control
Power Systems (Mech/Elec/Fluid)Control Systems (Mech/Elec/Fluid)
Packaging SystemsAutomated Systems (Hard/Flexible)
CNC/PLC/Computer ControlComputer Systems and Networks
Information TechnologyDatabase Systems (MIS, etc.)
Enterprise Wide System Integration
quality and continuous iMProveMent
Customer FocusQuality Systems and Standards
Statistical Control MethodsProblem Analysis & Solving
Factor Analysis (DOE/Correlation)Capability Analysis
Inspection/Test/ValidationMetrology
Reliability AnalysisContinuous Improvement/Lean
Customer and Field Service
Manufacturing ManageMent
Strategic PlanningGlobal Competition
Organizational Design & ManagementProject Management
Personnel ManagementHuman Behavior/Leadership
Labor RelationsEducation & Training
Operations Research/ForecastingSupply Chain & Logistics
Accounting/Finance/EconomicsBusiness/Engineering Ethics
Social ResponsibilityStandards, Laws, Regulations
the Four Pillars oF ManuFacturing engineering Provides a Model oF FundaMental knowledge required For ManuFacturing Practitioners.
For Further inForMation on the Four Pillars: httP://en.wikiPedia.org/wiki/Four_Pillars_oF_ManuFacturing_engineering
sMe certiFication and outcoMe assessMents:www.sMe.org/cert
the sMe curricula 2015 rePort addresses action oriented recoMMendations
and strategies For education in suPPort oF ManuFacturing:www.c2015.coM
sMe ManuFacturing education and research coMMunity:www.sMe.org/edu
The set of topics listed in the lower part of the boxes in the diagram represent the complete SME Certified Manufacturing Engineer Body of Knowledge. The extent to which a curriculum covers any individual topic depends upon the goals of the program and the degree level at which it is offered.
Electrical/Electronic Engineering Technology Assessment Test
Status Update
June 2011
Ron Land – ECETDHA Past Chair
Why An EET Assessment Test?
In 2007 Members of the ECETDHA Indicated That There Was a Widespread Desire For Quality Assessment Tools:
To Provide A Broadly-Accepted, Meaningful Benchmarking & Comparison Standard
To Support ABET Accreditation
To Support Longitudinal Trending
To Provide National Normative Data For Programs
Reminder – The Aims Of The Test:
It Is Intended To Help Programs: Measure Curriculum Effectiveness
Identify Curriculum Strengths & Weaknesses
Prepare for ABET Assessment Reviews
Measure Long-Term Performance Trends
It Is Not Intended To Be:
A Certification Exam For Individual Students
A Capstone Exit Exam For Prospective Graduates
A Qualification Standard For Graduates Or Programs
Experience To Date
Beta Testing (spring 2009)
Number Of Programs – 19
Number Of Students – 201
Demographics:
Four-Year Programs - 14
Two-Year Programs - 5
Smallest Test Group – 2
Largest Test Group - 34
States Represented – 14 Domestic and 1 International (India)
Production Testing Experience: 2010
School Number of exams Date
Austin Peay 4 11/29/2010
Bridgemont CTC 9 4/22/2010
Bridgemont CTC 4 4/23/2010
Buffalo State College 7 5/10/2010
Metro State College 5 12/9/2010
Northern Michigan University 4 4/23/2010
Northern Michigan University 2 12/7/2010
Pittsburg State University 18 4/12/2010
Rochester Institute of Technology 11 5/12/2010
Southeast Missouri State University 2 5/3/2010
Southern Illinois University 10 5/3/2010
Western Washington University 13 5/14/2010
Total: 89*
*Two paper & pencil tests also completed 11/17/2009
Production Testing Experience: 2011 (to date)
School Number of exams Date
Austin Peay 2 4/8/2011
Buffalo State College 17 5/12/2011
Illinois Central College 10 5/9/2011
Linn State 22 4/15/2011
Metro State College 8 4/27/2011
Michigan Technological University 6 4/14/2011
Northern Michigan University 4 4/15/2011
Pittsburg State University 14 4/14/2011
Rochester Institute of Technology 8 5/16/2011
Southeast Missouri State University 5 5/4/2011
Southern Illinois University 8 5/10/2011
St. Louis Community College 4 4/28/2011
Western Washington University 14 5/10/2011
Total: 122
If You Want Details:
Go to -- www.sme.org/eet
Sample Questions
Body of Knowledge
Sample Test Result Reports
Test Development History
Application Process
FAQs
Question – Where Do We Go From Here?
ECETDHA STATEMENT OF RECEIPTS AND DISBURSEMENTS JANUARY 26, 2011 – JUNE 15, 2011 BALANCE IN BANK, JANUARY 26, 2010 $ 3,617.65 MEMBERSHIP DUES RECEIVED March, 2011 $ 385.00 April, 2011 140.00 June, 2011 210.00 Total Dues Received $ 735.00 INTEREST RECEIVED January, 2011 – May, 2011 $ 4.40 Total Interest Received $ 4.40 TOTAL CASH RECEIVED $ 739.40 TOTAL CASH AVAILABLE $4,357.05 DISBURSEMENTS 4/15/2011 Penn State – Wilkes Barr – Minigrant $ 600.00 6/14/2011 Elaine Cooney – June 2011 IEEE CTA 759.31 TOTAL DISBURSEMENTS $ 1,359.31 CASH ON HAND, JUNE 15, 2011 $ 2,997.74
2010-2011 Membership (84 Active Members) Albany Technical College, GA Arizona State University Augusta Technical Institute, GA Austin Peay State University, TN Baker College - Flint, MI Bloomsburg University, PA Bridgemont Comm. & Tech.Coll., WV Buffalo State College, NY Butler Community College, KS California University of PA Chattanooga State Tech. C.C., TN County College of Morris, NJ DeVry University - Arlington, VA DeVry University - Chicago DeVry University - Columbus DeVry University - Dallas, TX DeVry University - Decatur, GA DeVry University - Federal Way, WA DeVry University - Fremont, CA DeVry University - Ft. Washington, PA DeVry University - Kansas City, MO DeVry University - Long Beach, CA DeVry University - Westminster, CO Drexel University, PA Dutchess Community College, NY Embry-Riddle Aeronautical Univ., FL Erie Community College, NY Ferris State University, MI Florence-Darlington TC, SC Florida A&M University Grambling State University, LA ICT Center, Springfield, MA Iowa Western Community College IPFW IUPUI Kansas State University - Salina Lorain County Comm. College, OH Louisiana Tech University Macomb Community College, MI Marion Technical College, OH Metropolitan State Coll. of Denver Michigan Technological University
Milwaukee School of Engineering National University, CA New England Institute of Technology, RI North Carolina A&T University Northern Michigan University Northwestern State University, LA New York Inst. of Technology Old Dominion University, VA Penn State - Berks Penn State (ETCE) Penn State - Harrisburg Pittsburg State University, KS Purdue University - Calumet Purdue University - North Central Purdue University - West Lafayette Rhodes State College, OH Rochester Institute of Technology Queensborough Comm. College, NY San Diego City College Savannah State University Sinclair Community College, OH South Dakota State University Southern Polytechnic State University, GA Shawnee State University, OH Springfield Technical CC, MA Texas A&M University - College Station Thomas Nelson Community College, VA Union County College, NJ University of Dayton, OH U. of Hartford, Coll. of ET&A University of Houston University of Maine University of Memphis University of Pittsburgh - Johnstown University of Southern Mississippi University of Toledo Vermont Technical College Wayne State University, MI Weber State University, UT Wentworth Inst. of Technology, MA Western Carolina University Western Washington University
2011-2012 Membership (12 Active Members)
Anne Arundel Community College, MD Butler Community College, KS California University of PA DeVry University - Federal Way, WA DeVry University - Long Beach, CA IPFW
Michigan Technological University Pittsburg State University, KS Purdue University - West Lafayette Sinclair Community College, OH University of Maine Vermont Technical College
