ECE 131 FOTEX Laboratory 1.Final

download ECE 131 FOTEX Laboratory 1.Final

of 7

Transcript of ECE 131 FOTEX Laboratory 1.Final

  • 7/27/2019 ECE 131 FOTEX Laboratory 1.Final

    1/7

    ECE 131 FOTEX

    Laboratory 1

    Aguilar, Reggilloyd F.

    Ambalong, Donna Jane G.

    Fu imori Kento F.

    July 10, 2013

  • 7/27/2019 ECE 131 FOTEX Laboratory 1.Final

    2/7

  • 7/27/2019 ECE 131 FOTEX Laboratory 1.Final

    3/7

    DC Current and Voltage

    AC Current and Voltage

    Question:Given youve not been asked to connect the digital

    multimeters inputs to anything yet, why does the DMM read very

    small values of voltage instead of zero?

    Answer: Due to the offset values of voltages and current from

    the circuitry of the internal or external system, that is why

    the DMM read very small values of voltage. Also, this is due to

    the non-ideal behaviour of the system.

  • 7/27/2019 ECE 131 FOTEX Laboratory 1.Final

    4/7

  • 7/27/2019 ECE 131 FOTEX Laboratory 1.Final

    5/7

  • 7/27/2019 ECE 131 FOTEX Laboratory 1.Final

    6/7

    PART E- The NI ELVIS Function Generator

    The NI ELVIS Function Generator

    (FGEN) is an instrument that can

    output AC signals of various

    shapes, sizes and frequencies to

    terminals on the Emona FOTEx.

    Connect the set-up shown below.

    Setting 2ms/div in the timebase control

  • 7/27/2019 ECE 131 FOTEX Laboratory 1.Final

    7/7

    Setting the amplitude = 2.80 Vpp

    Setting the frequency = 135 Hz