ECCL Section 4 ProjectManual Planning

EMERYVILLECENTERofCOMMUNITYLIFE

Nexus par tner s dsk|Concord ia|MKTh ink

100%DesignDevelopmentProjectManualApril18th,2013

EXTERIOR LIGHTING PRODUCT SHEETS

LUMINAIRE SPECIFICATIONPROJECT : LOCATION : QUANTITY : NOTE :

DATE :

Head Oce:3302 NW 211th TerraceHillsboro,Oregon97125USA

Tel:Fax:Email:Website:

503-645-0500 503-645-8100 [email protected] www.ligmanlightingusa.com

Ligman Lighting USA reserves the right to change specications without prior notice.

Aluminum Frame Paint Color (Please Specify) 01-Black - RAL 9011 02- Dark Grey - RAL 7043 03-White - RAL 9003 04 - Metallic Silver - RAL 9006 05-Matt Silver - RAL 9006 07- Custom - RAL __________ 06-Bronze -RAL 6014

L1 Stainless

IP65 : Suitable for Wet Locations

A range of vandal resistant rectangular wall recessed luminaires. Suitable for indoor or outdoor applications in residential, shopping and pedestrian areas as decorative guide light. Available in a variety of lamp options that include energy saving compact uorescent and LED light sources .Main characteristics are low glare and the limited maintenance concept. The LED luminaires house a high quality SMD (LEDs) source with low energy consumption and long service life 60,000 80,000 hrs.The legend is available with aluminum or stainless steel frames. Low copper content die-cast aluminum housing with a high corrosion resistance. Stainless steel screws. Durable silicone rubber gasket and impact resistant UV stabilized acrylic diuser. 4 way 1/2 Threaded conduit holes with plugs provided. Housing is treated with a chemical chromatized protection before powder coating, in a White Epoxy nish ensuring high corrosion resistance. Integral electronic driver. The LED are available in 2700K, 3000K, 3500K, 4000K, 5100K. Consult factory for additional colors.

Reector- 90% Reective white powder coat paint.

Note- Integral Driver with thermadjust technology.- Recessing box is included.

Mounting Detail

10.2 3.93.3

3.7 0.3

30 White LED 2w

L2 Stainless Louver L3 Stainless Slats

L1 Aluminum

L2 Aluminum Louver

L3 Aluminum Slats

L4 Aluminum

L5 Aluminum L6 Aluminum L7 Aluminum

L8 Aluminum L9 Aluminum

- Qty 4 - 1/2 Threaded conduit holes with plugs provided

A40181

0.2-1 0.3

Product Type

U40019 Legend recessed step light

Voltage (Please Specify) 120V

Stainless Steel

277V Other ___________

Aluminium

(For More Lamp options please Consult the Catalogue, Website or Contact The Ligman Lighting Factory)

Lamp

2700K 3000K 3500K

4000K5100K

LED Color (please specify)

Front frame (please specify)

C- Clear Lens Dry Wall Mounting Clamp

Options (please specify) F- Frosted Lens

Physical DataLength: 10.2Height: 3.9Weight: 2.8 lbs.

LUMINAIRE SPECIFICATIONPROJECT : LOCATION : QUANTITY : NOTE :

DATE :

Head Oce:3302 NW 211th TerraceHillsboro,Oregon97125USA

Tel:Fax:Email:Website:

503-645-0500 503-645-8100 [email protected] www.ligmanlightingusa.com

Ligman Lighting USA reserves the right to change specications without prior notice.

IP65 : Suitable for Wet Locations

Product Type

U40021Legend 2 recessed step light

Note- Integral Electronic control gear.

Voltage (Please Specify) 120V 277V Other ___________

(For More Lamp options please Consult the Catalogue, Website or Contact The Ligman Lighting Factory)CFT 5/7/9w

Lamp

C- Clear Lens

Options F- Frosted Lens

Physical DataLength: 10.2Height: 3/9Weight: 4.2/3.5lbs.

Front Style

Color (please specify) for aluminium front 01-Black - RAL 9011 02- Dark Grey - RAL 7043 03-White - RAL 9003 04 - Metallic Silver - RAL 9006 05-Matt Silver - RAL 9006 07- Custom - RAL __________ 06-Bronze -RAL 6014

Aluminium Stainless steel

3.93.3

3.7 0.3

A range of vandal resistant rectangular wall recessed luminaires. Suitable for indoor or outdoor applications in residential, shopping and pedestrian areas as decorative guide light. Available in a variety of lamp options that include energy saving compact uorescent and LED light sources .Main characteristics are low glare and the limited maintenance concept. The LED luminaires house a high quality SMD (LEDs) source with low energy consumption and long service life 60,000 80,000 hrs.

The legend is available with aluminum or stainless steel frames. Low copper content die-cast aluminum housing with a high corrosion resistance. Stainless steel screws. Durable silicone rubber gasket and impact resistant UV stabilized acrylic diuser. Double cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral control gear. Anodized high purity aluminum reector. The SMD (LEDs) are available in red, blue, yellow, green and white 3000K, 4000K, 5000K. Consult factory for additional colors.

A40181

0.2-1 0.3 Dry Wall Mounting Clamp

10.2

vision3lighting.com

Vision3 Lighting 2012Note: See specification sheet for catalog number logic and most current product information.

IG2 MODEL IG2 12V 20W MR16 10W LED

Landscape

Applications:

Shown in Silver Powder Coat Finish (SI)

IN GRO

UND - 12V

Construction: Face plates & pour collars available in machined aluminum, machined brass or machined stainless steel. Aluminum housing is pre-treated & painted black with polyurethane powder coat. Stainless steel hardware. Lamp Holder: Machined faceplate has clear, borosilicate glass lens, glued in and is attached to black anodized, machined aluminum cap. O-ring seal on body prevents water entry into lamp compartment. Cable connection sealed with water-tight strain relief.Pour Collar: Pour collar option is recommended for concrete pour installations. Socket: GY-6.35 bi-pin porcelain socket with 6 of 16-2 cable supplied. LED version has module installed. Lamp: Utilizes 20W MR16 halogen lamps or integral 10W Solid State LED with driver.Accessories: Up to 3 lens or shielding options can be specified; 2 for the LED module.

Finishes: 14 standard powder coated aluminum finishes, clear anodized aluminum finish, 3 brass finishes and 3 stainless steel finishes available. See FINISHES section of catalog, inside back cover.

Labels: CSA listed for wet location landscape use (UL1838). Requires a remote magnetic or approved electronic transformer for the LED module.

Dimensions: 3 3/8 diameter faceplate with pour collar. 3 diameter housing and 10 7/8 overall height.Warranty: Aluminum is warranted for 5 years. Brass and stainless steel are warranted for 25 years.

Precision-machined lighting fixture for MR16 halogen lamps or integral LED lamp module with driver. Designed for in-ground installation for up lighting trees, landscapes or any vertical hardscape surface. Features: Compact size with big performance. Drive-over rated. Pour collar option, attached to housing, allows for easy installation in concrete pour installations. Flush lens design reduces mineral deposits or lens surface.

To reduce the amount of mineral deposits on the fixture lens, every Model IG2 includes our Flush Lens design. The lens is attached into the faceplate in a manner that forms a flush fit.

Metals: 6061-T6 Aluminum C36000 Brass 304 Stainless Steel Pour Collar Option: Standard With Pour Collar

Flush Lens Feature:

Lamp Holder:

The lamp holder in the IG2 is a sealed fixture with an O-ring seal between the cap and body and a weather-tight connector from the body to the supply wire.

V3 SSLSSLS O L I D S TAT E L I G H T I N G

NEW LED Solid State version of this Model is now available.

Features: Same design as standard Model IG2 with integral LED module and driver. Three beam patterns available: 12 Spot, 21 Narrow Flood and 41 Flood. Replaceable LED lamp module with thermal control to prevent overheating. Two power settings:10 watts (428 lumens) or 6.7 watts (325 lumens). 3000K Color, 83 CRI average . 12V AC/DC. Dimmable. L70 = 60,000 hours. Five-year warranty. (Solid state version is not interchangeable with halogen version of this product.)

PRODUCT FEATURES: Surface mount ceiling or wall mount; 17"Dia.6"D

Peace of Mind Guarantee against breakage

Dust and water protected to IP64 standards

SPECIFICATIONSBASEPLATE: Marine grade die-cast aluminum. Integral heat sinks. Baseplate flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Baseplate provided with four-point mounting holes, one wireway hole and temporary junction box mounting breakouts. Standard black, bronze or white exterior TGIC polyester powder coat 5-step pre-treatment. See Ordering Information for optional finishes.

LENS: UV-stabilized, high impact resistant, virgin injection molded polycarbonate or acrylic. High efficiency blondel fluted lens obscures lamp image and maximizes uniformity. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive Torx with center pin fastener.

LENS BASE/GRILLE: Lens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate. Optional Light Gray, Silver, Forest Green or Custom Color (see Ordering Information below) are chemically bonded, impact resistant finishes.

GASKETING: Die-cut, closed cell neoprene self adhesive gasket seals baseplate to mounting surface. Closed cell, silicone O ring gaskets positioned and friction secured in gasket channels of lens base, baseplate and optional surface adapter.

HARDWARE: One stainless steel Torx with center pin fastener.

ELECTRICAL: Replaceable high-brightness ANSI 3500K (80 CRI min.), 4000K (70 CRI min.), or 5000K (70 CRI min.) white LED array. 120-277VAC, high power factor electronic driver. See options for higher CRI lamp availability.

PATENT: U.S. Patent No.: 6,042,251.

WARRANTY: Standard four-point mounting and polycarbonate lens required for Peace of Mind Guarantee. One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

LISTINGS: Luminaire is certified to UL Standards by Intertek Testing Laboratory for wet location. UL certified IP64 per IEC 60598. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux.

ModelMR17BL BarMR17CL CrossMR17EL EyelidMR17FL Full Face

Lens TypePIA Pearlescent High Impact AcrylicPP Pearlescent Polycarbonate

Finish DB Dark Bronze FG Forest Green LG Light Gray MB Matte Black MW Matte White SL Silver CC Custom Color (Consult factory)

MR17_L-LED-020813

OptionsLEL LED Emergency Battery Backup with Die-cast Surface Adapter (SA) - Non ADA BPC Photo Control Shielded Button Type (Requires Surface Adapter) n/a with DVFS Single Fuse & Holder NAT Natatorium Environment OptionR80 Minimum 80 CRI (4000K LED only)RMP Retrofit Mounting Plate (See Tech Sheet)WMR Wiremold 500 Ready (See Tech Sheet)

AccessoriesSA Die-Cast Surface Adapter9500 Torx Screwdriver

n/a with Peace of Mind Guarantee

When you see this image, you will know the Kenall product shown or described is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. Content of specication sheets is subject to change; please consult www.kenall.com for current product details. 2013 Kenall Mfg. Co. All rights reserved.

www. kenall.com P: 800-4-Kenall F: 847-360-1781 1020 Lakeside Drive Gurnee, Illinois 60031

Model Lamp Type Voltage OptionsLens Type Finish Accessories

ORDERING INFORMATION

Lamp Type (Qty/Ballast/Voltage/Starting Temp)26L35K 26 Watt 3500K LED (1/SCC/120-277V/-22F) MR17EL only26L40K 26 Watt 4000K LED (1/SCC/120-277V/-22F) MR17EL only 26L50K 26 Watt 5000K LED (1/SCC/120-277V/-22F) MR17EL only26L57K 26 Watt 5700K LED (1/SCC/120-277V/-22F) MR17EL only 40L35K 40 Watt 3500K LED (1/SCC/120-277V/-40F) n/a with MR17EL40L40K 40 Watt 4000K LED (1/SCC/120-277V/-40F) n/a with MR17EL 40L50K 40 Watt 5000K LED (1/SCC/120-277V/-40F) n/a with MR17EL40L57K 40 Watt 5700K LED (1/SCC/120-277V/-40F) n/a with MR17EL

Voltage120 120 Volts277 277 VoltsDV 120-277 Volts

MILLENIUM ROUNDMR17 SERIES LED LOW PROFILE HOUSING

PROJECT INFORMATION

Job Name

Fixture Type

Catalog Number

Approved by

FL

BL CL EL

IP64C

LED

MR17FL MR17ELLED Nomenclature 40L40K 26L40KLED Wattage 40 Watt 26 WattLuminaire Equivalent (2) 26W CFL (2) 42W CFLDelivered Lumens 2581 1854Input Watts 44 29Lumens / Watt 59 64Nominal CCT 4000K 4000KDisplayed information is for selected luminaires only. Additional wattages and color temperatures are also available. Consult IES files at www.kenall.com.

206

412

617

823

1

2

162

324

486

648

1

2

MR17FL MR17EL

17.64"

10.00"

7.00"

8.64"FL

(4) 3/4" NPT4 sides (Plugged)

(1) 3/4"NPT (Not Plugged)

8.90"BL, CL, EL

5.84" 7.75"

7.75"

CROSS SECTION

SURFACE ADAPTER

BACK MOUNTING VIEW

stephenRectangle

stephenRectangle

stephenRectangle

stephenRectangle

stephenRectangle

sjeyText BoxCF1STAIRCASE

BEGA-US 1000 BEGA Way, Carpinteria, CA 93013 (805) 684-0533 FAX (805) 566-9474 www.bega-us .com copyright BEGA-US 2011 Updated 10/12

Type:BEGA Product:

Project:Voltage:

Color:Options:

Modified:

A

B

b= Beam angle

Surface-mounted ceiling with LED

b A B

6503 LED 31 W LED 28 712 8

Housing: Two piece die-cast aluminum provided with means for direct attachment to the ceiling over a 3" or 4" octagonal wiring box. All aluminum used in the construction is marine grade and copper free.

Enclosure: Tempered clear glass, retained by a one piece, die-cast aluminum step baffle frame. Frame is secured by one stainless steel captive screw threaded into a stainless steel insert. Internal reflector made from pure, anodized aluminum. Fully gasketed for weather tight operation using molded silicone rubber U-channel gasket.

Electrical: 31 W LED luminaire, 36 total system watts, -20 C start temperature. Integral 120 V through 277 V electronic LED driver, 0-10 V dimming. Standard LED color temperature is 3000K with an 80 CRI. Available in 4000K (80 CRI); consult factory. Note: Due to the dynamic nature of LED technology, LED luminaire data on this sheet is subject to change at the discretion of BEGA-US. For the most current technical data, please refer to www.bega-us.com.

Finish: Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order.

UL listed, suitable for wet locations. Protection class IP65.

Weight: 4.0 lbs.

Luminaire Lumens: 1328 Tested in accordance with LM-79-08

Sealed & Gasketed LED Downlight50,000+ Hour Life Sealed Housing OptionalLM-80 Qualified LM-79 Certified Photometry

Performance at a Glance

Specifications

LRR-08440

8 LED 2450 LUMENS 38 SYSTEM WATTS

LRR-0844038

LED Light Engine* 38wattLEDarray.3500Kstandard(orsee

Option-41K). 2450*lumens,65LPW(totalsystem). 81CRI,50,000+hourlife(L70).** Fullysustainable:removableforservicing.Thermal Management System All-aluminumproprietaryheatsink,

componentsandhousingmaximizecooloperationandlonglifewhileminimizingmaintenance.

LED Power Supply Suitableforoutdoor/indooruse:

-30C(-22F)to70C(158F). Specify120Vor277V(50-60Hz).Load

insensitive. 0-10voltdimmingstandard. KirlinremoteSmartSupplydriverinstead

(upto6luminaires).SeeOption-SS.Thermal Protection Thermalprotector(percurrentNEC)

providesautomaticcut-offifratedtemperatureisexceeded.Mustspecifyinputvoltage.

Trim / Lens Assembly Rustproof100%aluminumgrooveless,

smooth,self-flangedwhitetrim.

RegressedtemperedprismaticC#73lens. SeeOption-GEforgreenacrylicfilter.5X Sealed and Gasketed (1)Siliconesealbetweentrimandlensseals

lenstotrim,(2)closedcellgasketingbetweentrimandhousingflangesealstrimtohousing,(3)closedcellgasketingontrimflangesealsflangetoceiling(4)closedcellgasketingonbottompansealshousingtoceilingand(5)neopreneO-ringsonstainlesssteelfastenerssealfastenerstotrim.

MeetsASTME283restrictedairflowof2CFMmaximum.

Acrylic Enameled Aluminum Housing Rustproofandcorrosionresistant:Exceeds

1000hourASTM5%saltspraytest. Shallowdepthfitsrestrictedplenums. Cooloperation:Extendslifeofallcomponents. Fullysustainable:Entireluminaire,including

LEDlightengine,easilyvisibleandservicedthroughaperture.Built-inplasterflange.

Sealedhousingdesign(CCEAcompliant)available,seeOption-SH.

Outlet Box ULlistedJ-boxwithinsulatedremovablecover.

Prewired14GA(NEC)withandknockouts.

Installation Recessesindoor/outdoorincovered

locations. Accommodatesceilingsupto1-1/8thick

orseeOption-79. 27galvanizedhangerbarswithadjustable

mountingbrackets(2)supplied. Forresidentialmountinghardwareforwood

joistceilings,seeOption-RH.UL, C-UL (Canada) Listings Wet,dampordrylocations,covered

ceilings. Through-branchconductors(4#12AWG

90C).CE & FCC Compliance CertifiedtomeetIES60601-1-2&EN

60601-1-2electromagneticcompatibilitystandardformedicalelectricalequipment.

FCCPart15certifiedforEMI/RFIemissions.FIVE YEARLimited WarrantyCompletestandardfixture.

0-10V DIMMING S

TANDARD IP65 Rated

2450

Exceptional Energy

EfficiencyEEE

3401EASTJEFFERSONAVENUEDETROIT,MICHIGAN48207-4232(313)259-6400Fax:(313)259-9409OR(313)259-3121www.kirlinlighting.com

LED LIGHTINGDUETOOURCONTINUINGEFFORTTOIMPROVEPRODUCTS,TECHNICALINFORMATIONISSUBJECTTOCHANGEWITHOUTNOTICE.THEKIRLINCOMPANYEXPECTSPHOTOMETRICPERFORMANCETOIMPROVESIGNIFICANTLYANDFREQUENTLYASLEDSOURCETECHNOLOGYIMPROVES.LE

DMARCH200

9

MAX.SYSTEMWATTS CATALOGNUMBER

Lighting Since 1895

CATALOG# TYPE

JOBNAME WATTAGE VOLTAGE

MAX.LUMENS*Seenotenextpage**Seenotenextpage

CeilingCut-out9Dia.

300

600

9000 15 30

45

60

7590

Lumens: 1791 Beam: ~89 SC: 1.3 Effic: 73.0% ITL Test: 68389

LEDLIGHTING

REV

AUG201

2

LED Power Supply-120 Powersupplyandthermalprotectorratedfor

120V(50-60Hz)input.-277 Powersupplyandthermalprotectorratedfor

277V(50-60Hz)input.-39 Specify-39LutronforHi-Lume3wirefull

range(0-100%)dimmingpowersupplyinsteadofstandard0-10Vdimming.

-98 347V50Hz.instead.Consultfactory.-EI Remoteemergencyinverterfor100%rated

lumenoutput.Runtime:90minutes.Notforusewith-SSSmartSupplydriver.

-SS RemotemountedKirlinSmartSupplydriver,soldseparately.Drivesupto6fixturesat38wattseach.OrderLPS-1220A(0-10Vanalogdimming)orLPS-1220D(DMXdimming).Seekirlinlighting.comorconsultfactoryformoreinformation.

Color Temperature (CCT) -41KColortemperature4100K.Consultfactory.

Lenses and Trims-94 Customcolor/finish.Specify.Consultfactory.-GE Greenacrylicfiltermountedinlensassembly.

Other -79 Extensioncollarforceilingsupto2thick.-99 Specialmodification.Consultfactory.-SH Sealedhousingandjunctionbox,CCEA

Approved.

LRR-08440

8 LED 2450 LUMENS 38 SYSTEM WATTS

APPROVALSTAMPSUBMITTALDATAJOBNAME

TYPE

WATTAGE VOLTAGE

CATALOGNUMBER

LIMITED

WARRAN

TY:CATALO

GED

KIRLINFIXTU

RESAREWARRAN

TIEDFREEO

FDEFEC

TSINW

ORKM

ANSH

IPORM

ATERIALFORTH

REEYEARSFROMDATEO

FPURC

HASE,IN

STALLEDTO

N.E.C

.,INNORM

ALUSE.M

anufacturerathisoptionwillreplaceorrepairsuchfixtureorrefundthepurchasepriceonpresentation

ofproofofpurchaseanddefectivefixtureattheofficesofmanufacturerw

ithinthreeyearsoforiginalshipment.Liabilityofm

anufacturerislimitedtotheforegoing,andm

anufacturershallnotbeliableforanyotherdamages,directorindirect,sustainedorsufferedbypurchaseroranyperson.Thisw

arrantyissuppliedtothebuyerinplaceofallotherwarranties,expressedorim

plied.Sellerdoesnotw

arrantastomerchantabilityorfitnessforaparticularuse,norw

illanyoralstatementconstituteaw

arrantyoramendthisspecificw

arranty.Abnormaluse,abuseofthefixture,im

properinstallation,orrepair,ormodificationofthefixturew

ithoutpriorwrittenauthorizationfrom

themanufacturerw

illrenderthewarrantyvoid.

Detailed Photometry - Installed Fixture

LEDMARCH2009

Since 1895

PhotometryfromI.T.L.,Boulder,CO

PhotometrictestingdoneinaccordancewithIESNALM-79-08

Dia.(inft.)showniswhereFC valueishalftheFCatnadir.

Cone of Light KeyFt.FCDia.

DistancefromfixtureFootcandlesatnadir(0)Circleoflightat50%ofFC

Options

LEDLIG

HTIN

GREVA

UG2012

* LEDmanufacturersmaintainatoleranceof+7%onflux(lumens)andpower(electrical)measurements.Kirlin photometricsareactualtestdatafromIndependentTestingLaboratories(ITL).

** LEDOperatingCharacteristics:50,000+hoursat70%lumenmaintenance.(L70)

LRR-08440

Lumens: 1791 Beam: ~89 SC: 1.3 Effic: 73.0% ITL Test: 68389 300

600

9000 15 30

45

60

7590

68

10121416

7.710.312.815.417.920.5

24.213.68.76.14.43.4

Cone of Light

Dist. FC Dia.

CANDLEPOWER DISTRIBUTION

0.0 22.5 45.0 67.5 90.0

0 872 872 872 872 8725 871 871 871 871 871

10 856 856 856 856 85615 812 812 812 812 81220 690 690 690 690 69025 425 425 425 425 42530 214 214 214 214 21435 94 94 94 94 9440 37 37 37 37 3745 6 6 6 6 690 0 0 0 0 0

LM-80 Qualified LM-79 Certified Photometry

EEE

Rev. Date: 01/16/12

3"W x 5"H ARM

Surface mount

footnoteS

1. 24" standard, consult factory for other lengths2. 24" standard; 45 max slope, field cutable (consult factory for other lengths)3. SSG = Soft Satin Glow Anti-iridescent4. 525mA only5. Color Temperature per fixture; 3500K Standard

S Surface

Surface (S)P Pendant

Pendant (P)SW Wall Bracket

Wall Bracket (SW)

HP Hangstraight Pendant (Field Cutable)Aircraft Cable (AC)AC Aircraft Cable Hangstraight Pendant (HP)

(Field Cutable)

mounting

21-1/4" [537mm]

20" [508mm]10"

[254mm]

10"

20" [508mm]

[254mm]

7" [178mm]

Wall bracket

leD Performance SPecS

2012 ruud lighting inc. a cree company. all rights reserved. the information in this document is subject to change without notice.9201 Washington avenue, racine, Wisconsin 53406 | 800-236-6800 | www.betaleD.com

Made in the U.S.A. of U.S. and imported parts. Meets Buy American requirements within the ARRA.

family ProDuct oPtic mountingleD count (# of leDS)

SerieS Voltage colorreflector/

cone finiSh3DriVe

currentoPtionS

Please type additional options in manually on the lines provided below

eSa c10 WD 28 D u

Essentia 10" Cylinder Wide SPSWhP

ac1ac2ac3

SurfacePendant1

Wall BracketHangstraightPendant2

5' Aircraft Cable10' Aircraft Cable15' Aircraft Cable

28 D Universal 120-277V

bkbzcS

Wh

BlackBronzeCamaroSilverWhite

SSgcSSggrSSgbrSSgcg

SSgPeSSgWhSSgbW

ClearGraphiteBronzeChampagneGoldPewterWheatBlackWhite

525700

525mA700mA

Dh

lmfS27k30k40k

Dimming Lutron HiLume4

Lens Media Fusing2700K5

3000K5

4000K5

# of leDS

initial DeliVereD lumenS

SyStem WattS

120-277V

total currentl70

hourS* @ 25c (77f)

50k hourS lumen

maintenance factor

@ 25c (77f)

@ 3500k/ 4000k

@ 3500k/ 4000k

with lens media

@ 3000k

@ 3000kwith lens

media

@ 2700k

@ 2700kwith lens media

@120V @208V @240V @277V

525ma fixture oPerating at 25c (77f) - 0-10V Dimming Standard

28 2596 2294 1947 1721 1791 1583 53 0.42 0.24 0.21 0.18 147,000 90%

lutron hi-lume DriVer: 525ma fixture oPerating at 25c (77f) - DH option

28 2596 2294 1947 1721 1791 1583 53 0.44 n/a n/a 0.20 147,000 90%

700ma fixture oPerating at 25c (77f) - 0-10V Dimming Standard

28 3428 3030 2571 2273 2365 2091 68 0.57 0.33 0.29 0.26 126,000 88%

* For recommended lumen maintenance factor data see tD-14

eSa-c10-WD- -28 essentia leD Downlight - cylinder - Wide

PRELIMINARY

Rev. Date: 01/16/12

PhotometricS

color tolerance

nominal cct cct cri r9

2700K 2755 +/- 42K 90 min 50

3000K 2993 +/- 50K 90 min 50

3500K 3388 +/- 63K 80 min 40

4000K 3899 +/- 75K 80 min 40

color Quality commitment

The needs and concerns regarding color quality, consistency and stability as they relate to interior spaces are paramount to a successful interior lighting design. Cree is committed to delivering the color-quality performance that meets or exceeds the expectations of best-in-class traditional light source technologies.

Cree Essentia luminaires initial color consistency to be within a 2-step MacAdam Ellipse from the initial specified color point.

We are committed to providing luminaire color point stability over time, within a 2-step MacAdam Ellipse to the predicted L70 point (in hours) for all products. BetaLED NanoOptic Technology enables color spatial uniformity that meets requirements demanded by the most discerning lighting designers.

general DeScriPtion

Ten-inch cylinder downlight luminaire designed for 28 high output LEDs. Two-piece optical assembly provides a broad, even light distribution, combining low brightness, with maximum visual cutoff and efficiency. Four light distributions available narrow spot, narrow, medium, and wide. Five year limited warranty on fixture.

featureS

Luminaire uses 28 high output LEDs, 3500K standard, tolerance to be within a 2-step McAdam Ellipse. See table for specific color tolerance (below).

Axial and Tilted Axial TIR NanoOptic on each individual LED to maximize light delivered through aperture.

Provides 45 visual cutoff to source.

Low brightness parabolic spun Alzak aluminum cone, 0.06" thick with polished radius and continuous self-flange.

Precision nickel plated cone retainers assure that the lower cone is held in position.

Custom extruded aluminum heatsink.

Flow-Thru design to maximize cooling of LEDs.

Heavy wall aluminum housing.

Surface, pendant, wall, or cable mounting.

electrical

High Efficiency constant current driver(s), 120-277VAC input, 50/60Hz, 525mA or 700mA drive current.

0-10V dimming, standard. 100%-10% full-range continuous dimming.

LED drivers have power factor>90% and THD

LED WATTAGE AND LUMEN VALUES

Ordering Code

Average System Watts1

LED Current

(mA)

LED Selection

Luminaire Initial Absolute Lumens2,3 Basis of Lumen Data

Photometric tests performed in compliance with IESNA LM-79.

TYPE 2 TYPE 3 TYPE 4

35LA 35 350 NW 2,883 2,974 2,821

55LA 55 530 NW 3,948 4,158 3,904

1. Wattage may vary by +/- 8% due to LED manufacturer forward volt specification and ambient temperature. Wattage shown is average for 120V through 277V input. Actual wattage may vary by an additional +/- 10% due to actual input voltage. 2. Tests are in process for luminaires with the DL option , CW and WW luminaires. CW values may be approximated by applying a 1.08 multiplier to NW values shown. Contact [email protected] if any approximate estimates are required for design purposes. 3. LED arrays feature LEDs that provide from 100 to 130 lumens per watt when operated at 350 mA. Lumen values based on tests performed in compliance with IESNA LM-79.

101L Trapezoidal Wedge LED - Constant Wattage / Full Light Output

101L-DCC Trapezoidal Wedge LED - Dual Arrays with Dual Circuit Control

101L-DIM Trapezoidal Wedge LED - 0 - 10V Dimming (Control system by others.)

101L-APD Trapezoidal Wedge LED with Automatic Profile Dimming

See page 3 for more detailed luminaire configuration information.

Job:Type: Notes:

100 Line LED101 Performance Sconce LEDPage 1 of 3

Philips Gardco 101 LED trapezoidal wedge high performance sconce luminaires are designed to integrate naturally to wall surfaces. 101 LED luminaires are available with three (3) different distribution patterns, providing full cutoff performance (in the normal downlight position) and featuring LED arrays. Luminaires provide performance excellence and advanced Philips Gardco LED thermal management technology. High performance Class 1 LED systems offer potential energy savings of 50 % or more compared to HID systems. 101 LED luminaires are also available with Automatic Profile Dimming, increasing savings by an additional 33%.

PREFIX DISTRIBUTION

1611 Clovis Barker Road, San Marcos, TX 78666 (800) 227-0758 (512) 753-1000 FAX: (512) 753-7855 sitelighting.com 2012 Koninklijke Philips Electronics N.V. All Rights Reserved. Philips Gardco reserves the right to change materials or modify the design of its product without notification as part of the companys continuing product improvement program.

G200-028/1012

Enter the order code into the appropriate box above. Note: Philips Gardco reserves the right to refuse a configuration. Not all combinations and configurations are valid. Refer to notes below for exclusions and limitations. For questions or concerns, please consult the factory.

PREFIX LED WATTAGEDISTRIBUTION LED SELECTION FINISHVOLTAGE OPTIONS

23 4

Type IIType IIIType IV

Wide Throw Optic, featuring Maximized Lateral ThrowPreferred Wide Throw Optic, featuring Improved Forward ThrowMaximized Forward Throw Optic

VOLTAGELED SELECTIONCW Cool White - 5700K - 75 CRI

NW Neutral White - 4000K - 70 CRI

WW Warm White - 3000K - 80 CRI

UNIV 120V through 277V, 50hz or 60hz

100 Line LED

16 1/4"41.28 cm

9"22.86 cm

7"17.78 cm


G200-028/1012

101 Performance Sconce LEDPage 2 of 3

4. Polycarbonate lenses carry a 1 year warranty only.5. Rear entry permitted. 6. Not available with PSO option and not available with the WG option.7. Not available with DL option and not available with the WG option.8. Not available with DL option and not available with the PSO option.9. Specify input voltage.

FINISH OPTIONS

DIMENSIONS

Mounting Bolt Pattern

4 5/16"10.95 cm

3"7.62 cm

Mounting Plate

1 3/4" dia.4.4 cm

Note: Mounting plate center is located in the center of the luminaire width and 3.5"(8.89cm) above the luminaire bottom (lens down position). Splices must be made in the J-box (by others). Mounting plate must be secured by max. 5/16" (.79cm) diameter bolts (by others) structurally to the wall.

BRP Bronze Paint

BLP Black Paint

WP White Paint

NP Natural Aluminum Paint

BGP Beige Paint

OC Optional Color Paint Specify Optional Color or RAL ex: OC-LGP or OC-RAL7024.

SC Special Paint Specify. Must supply color chip.

F9 Fusing

PCB9 Button Type Photocontrol

DL6 Diffusing Lens (reduces performance significantly)

PSO4,7 Offset Polycarbonate Flat Shield

UT 5 Uptilt

WS5 Wall Mounted Box for Surface Conduit

WS/UT5 WS Option w/5 Uptilt

WG8 Wire Guard

SPR Surge Protection 120V thru 277V Input meeting ANSI C62.41.2

(Not available with Fusing (F) option. DCC luminaires require one (1) surge protector per circuit)

GENERAL: Philips Gardco 101 LED Trapezoidal Wedge high performance sconce luminaires are designed to integrate naturally to wall surfaces. 101 LED luminaires are available with three (3) different distribution patterns, providing full cutoff performance (in the downlight position) and featuring LED arrays. Luminaires provide performance excellence and advanced Philips Gardco LED thermal management technology. High performance Class 1 LED systems offer potential energy savings of 50 % or more compared to HID systems.

THERMAL MANAGEMENT: Philips Gardco 101 LED luminaires utilize extruded aluminum integral thermal radiation fins to provide the excellent thermal management so critical to long LED system life.

LED RELIABILITY:

PREDICTED LUMEN DEPRECIATION DATA

Ambient Temperature C LED Wattage / Driver mA L70 Hours10

25 C35LA / 350 mA 150,000

55LA / 530 mA 100,000

40 C35LA / 350 mA 100,000

55LA / 530 mA 70,000

10. Predicted performance derived from LED manufacturers data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output.

OPTICAL SYSTEMS: Philips Gardco 101 LED luminaires utilize lensed LED arrays set to achieve IES Type II, Type III, and Type IV distributions. Individual LED arrays are replaceable. Luminaires feature high performance Class 1 LED systems.

HOUSING: Housings are die cast aluminum. A memory retentive gasket seals the housing to the door frame to exclude moisture, dust, insects and pollutants from the optical system. A black, die cast ribbed backplate dissipates heat for longer system life.

DOOR FRAME: A single-piece die cast aluminum door frame integrates to the housing form. The door frame is hinged closed and secured to the housing with captive stainless steel fasteners. The heat and impact resistant 1/8" (.32cm) tempered glass lens and one-piece gasket are mechanically secured to the door frame with galvanized steel retainers.

IP RATING: Luminaires are rated IP66.

FINISH: Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors are as listed. Consult factory for specs on custom colors.

LABELS: All luminaires bear UL or CUL (where applicable) labels. Lens down application is Wet Location and lens up is Damp Location.

WARRANTY: Philips Gardco LED luminaires feature a 5 year limited warranty, including a 5 year limited warranty covering the LED arrays. See Warranty Information on www.sitelighting.com for complete details and exclusions. Polycarbonate lenses carry a 1 year warranty only.

FULL CUTOFF PERFORMANCE: Full cutoff performance means a luminaire distribution where zero candela intensity occurs at an angle at or above 90 above nadir . Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10 percent) at a vertical angle of 80 above nadir. This applies to all lateral angles around the luminaire.

CUTOFF PERFORMANCE: Cutoff performance means a luminaire distribution where the candela per 1000 lamp lumens does not numerically exceed 25 (2.5 percent) at an angle at or above 90 above nadir, and 100 (10 percent) at a vertical angle of 80 above nadir. This applies to all lateral angles around the luminaire.

Page 3 of 3

100 Line LED101 Performance Sconce LED

LUMINAIRE CONFIGURATION INFORMATION


G200-028/1012

SPECIFICATIONS

101L: Philips Gardco performance LED sconce providing constant wattage and constant light output when power to the luminaire is energized.

101L-DCC: Philips Gardco performance LED sconce provided with dual circuiting, and dual arrays, permitting separate switching of each led array.

101L-DIM: Philips Gardco performance LED sconce provided with 0 -10V dimming for connection to a control system provided by others.

101L-APD: Philips Gardco performance LED sconces with Automatic Profile Dimming are provided with a progammed LED Driver included. The LED driver is factory programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously calculated by the LED driver based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point.

APD Dimming Profile:

100%

100%

50% 50%

Power On Mid Point

2 Hours 6 Hours

Power Off

Control System Summary

Project InformationProject #: 153689Project Name: Emeryville Sports ComplexDate: 01/07/13Project Engineer: E. SvenbySales Representative: Bob CrookhamControl System Type: Control and MonitoringCommunication Type: Digital CellularScan: 153689Distribution Panel Location or ID:Total # of Distribution Panel Locations for Project: 1Design Voltage/Hertz/Phase: 480/60/3Control Voltage: 120

Project Specific Notes:

Materials ChecklistContractor/Customer Supplied:

A single control circuit must besupplied per distribution panel location.

If the control voltage is NOT available,a control transformer is required.

Electrical distribution panel to provideovercurrent protection for circuits

Thermal/Magnetic circuit breakersized per full load amps on CircuitSummary by Zone Chart

Wiring: Dedicated control power circuit Power circuit to and from lightingcontactors Monitoring circuit from surge protectiondevice to Control and Monitoring cabinet 1 Harnesses for cabinets at remotelocations Means of grounding, including lightningground protection

Electrical conduit wireway system Entrance hubs rated NEMA 4:must be die-cast zinc, PVC, orcopper-free die-cast aluminum

Mounting hardware for cabinetsControl circuit lock-on device to preventunauthorized power interruption to controlpowerAnti-corrosion compound to apply to ends ofwire, if necessary

Call Control-Link Central(TM) operations centerat 877/347-3319 to schedule activation of thecontrol system upon completion of the installation.Note: Activation may take up to 1 1/2 hours

Equipment ListingDESCRIPTION APPROXIMATE SIZE1.Control and Monitoring Cabinet 24 X 482.Surge Protection Device 6 X 10

QTY SIZETotal Contactors 6 30 AMP Total Off/On/Auto Switches: 1

IMPORTANT NOTES1. Please confirm that the design voltage listed above is accurate for this

facility. Design voltage/phase is defined as the voltage/phase being connectedand utilized at each lighting pole's ballast enclosure disconnect. Inaccuratedesign voltage/phase can result in additional costs and delays. Contactyour Musco sales representative to confirm this item.

2. In a 3 phase design, all 3 phases are to be run to each pole. When a 3 phasedesign is used Musco's single phase luminaires come pre-wired to utilize all 3phases across the entire facility.

3. One contactor is required for each pole. When a pole has multiple circuits, onecontactor is required for each circuit. All contactors are UL 100% rated for thepublished continuous load. All contactors are 3 pole.

4. If the lighting system will be fed from more than one distribution location,additional equipment may be required. Contact your Musco sales representative.

5. A single control circuit must be supplied per control system.6. Size overcurrent devices using the full load amps column of the Circuit Summary

By Zone chart- Minimum power factor is 0.9.

NOTE: Refer to Installation Instructions for more details onequipment information and the installation requirements

C 1999,2013 Musco Sports Lighting,LLCForm: T-5030-1

T:\153\153689P1V1-010761547.pdf

Control System SummaryEmeryville Sports Complex / 153689 - 153689

- Page 2 of 4C 1999,2013 Musco Sports Lighting,LLCForm: T-5030-1

T:\153\153689P1V1-010761547.pdf



T:\153\153689P1V1-010761547.pdf

SWITCHING SCHEDULEField Type Zones Zone DescriptionBaseball-Softball 1 Baseball/Soccer/Football

CONTROL POWER CONSUMPTION120V Single Phase

VA loadingof MuscoSuppliedEquipment

INRUSH: 1555.0

SEALED: 241.0

BALLAST SPECIFICATIONS VOLTAGE: 480v THREE PHASE.90 Minimum Power Factor

BALLAST OPERATING VOLTAGE

1500 Watt Metal Halide LampOperating line amperage per fixture- maximum

1000 Watt Metal Halide LampOperating line amperage per fixture- maximum

208

8.6

6.5

220

8.3

6.4

240

7.5

5.8

277

6.5

4.9

347

5.1

4.0

380

4.7

3.6

480

3.7

2.9

CIRCUIT SUMMARY BY ZONEPOLE CIRCUIT DESCRIPTION # OF

FIXTURESFULLLOADAMPS

CONTACTORSIZE (AMPS)

CONTACTORID

ZONE

A1 Baseball/Soccer/Football 6 14.8 30 C1 1A2 Baseball/Soccer/Football 6 14.8 30 C2 1B1 Baseball/Soccer/Football 6 14.8 30 C3 1B2 Baseball/Soccer/Football 6 14.8 30 C4 1C1 Baseball/Soccer/Football 6 14.8 30 C5 1C2 Baseball/Soccer/Football 6 14.8 30 C6 1



T:\153\153689P1V1-010761547.pdf

PANEL SUMMARYCABINET

#CONTROLMODULE

LOCATION

CONTACTORID

CIRCUIT DESCRIPTION FULLLOADAMPS

DISTRIBUTIONPANEL ID (BY

OTHERS)

CIRCUITBREAKER

POSITION (BYOTHERS)

1 1 C1 Pole A1 14.80 1 1 C2 Pole A2 14.80 1 1 C3 Pole B1 14.80 1 1 C4 Pole B2 14.80 1 1 C5 Pole C1 14.80 1 1 C6 Pole C2 14.80

ZONE SCHEDULECIRCUIT DESCRIPTION

ZONE SELECTORSWITCH

ZONE DESCRIPTION POLE ID CONTACTORID

Zone 1 1 Baseball/Soccer/Football A1 C1A2 C2B1 C3B2 C4C1 C5C2 C6

Muscos LightStructure Green . . . for a More Energy Conscious Generation.

For Your BudgetInnovative photometric improvements of the luminaire result in substantially more efficient light control.

Muscos evolution of fundamental lamp principles creates a new operating system Smart Lamp.

Muscos Green friendly system will reduce by half or more, the cost of operating and maintaining your ballfield lighting system.

Muscos journey to the Green Generation 30 years of good old fashioned new technology

Problem Solution

1982Temporary lighting service and rolling lab Mobile Lighting System

4. 25% savings by switching on and off 20 minutes closer to actual usage time.

5. 15 minutes labor for turning on and off at $8 labor rate 2,500 operations.

1. 300 hours per year, 9 per kilowatt hour

2. $125 per luminaire for relamp labor and materials.

3. Average of 7.5 repairs at $500 each.

Savings25 Year Life Cycle Cost Savings

Prior Technology Fixture Quantity 52LightStructure Green Fixture Quantity 32

1. Energy photometric improvement $23,0802. Group Relamp $16,2503. Lamp Maintenance $3,750 4. Energy controls $5,770 5. Labor controls $10,000

Total Projected Savings $58,850

1976Existing technology

1977Factory assembled and wired light cluster SportsCluster. Predictable results, easier installation.

1981Glare control research

1987Easier maintenance remote ballasts

Amazing new technology . . . big cost benefits.

For The EnvironmentSpill and glare control features are now a standard part of every luminaire at no extra cost.

This green generation luminaire system cuts spill by half or more, even when compared to Muscos prior industry-leading technology.

And best of all, it does wonderful things for the adjoining environment. It puts much less light on nearby properties. It protects the beauty of the dark night skies.

1989Glare control with efficiency SportsCluster2

1991Complete lighting and electrical system from foundation-to-poletop, LightStructure System

1997Facility management services 10 Club Service and ControlLink

2005Energy, environment . . . todays prices LightStructure Green

Less Spill360 x 225 Soccer Field

30fc Average Maintained 30fc Constant Illumination

LightStructure Fixture Type LightStructure Green with Total Light Control photometric option

1500W MZ Lamp Type 1500W MZ

Vertical Illumination

0.50 fc Average 0.15 fc

0.74 fc Maximum 0.26 fc

52 # of Luminaires 32

Now 25 years of unprecedented, trouble-free operationMuscos Constant 25 product assurance and warranty program guarantees: Constantlightlevelsandgrouplampreplacementsattheendofratedlamplife Reducedenergyconsumption Monitoring,maintenance,andremoteon/offcontrolservices Systemstructuralintegrity

Muscos LightStructure Green . . . for a More Energy Conscious Generation.

LightStructure Green System still Five Easy Pieces plus:Improved Luminaire Efficiency1. Reflector system: More than 2000 photometric patterns provide optimal

energy efficiency and minimal spill light for each project.

2. Visor System: Several visor choices provide energy efficient light on the field and minimal spill light. The aerodynamics reduce wind load on the poles.

3. Side Shift Beam Control: Beams can be adjusted within the luminaire horizontally as well as vertically. We can now custom fit the light to the corners.

Smart Lamp Operating System1. Lamp: 30 years of lamp experience has taught Musco how to operate the lamp with

less energy and extend its life with a system of timed power adjustments.

2. Geared tilt adjustment: With a geared leveling mechanism, the lamp arc tube operates in the energy advantageous horizontal position.

Increased Durability, Assured Results1. Die-Cast aluminum reflector housing: Provides a rugged foundation for

building and maintaining a sophisticated photometric unit.

2. Gasketing: Improved material and gasket system design virtually eliminate outgasing and other contamination of the reflectors and lens.

3. Factory Assembled Luminaires: The luminaire ships totally assembled: avoids contaminants, saves time, improves aiming accuracy.

4. Attaching Mechanism: The factory assembled luminaire connects electrically and structurally to the crossarm with one simple attachment.

5. Factory Aiming: Muscos well established service of factory aiming is even better with Light-Structure Green . . . field, changes can still be done.

Solid control and flexible management 1. Controls and monitoring: This system, in one simple cabinet, included in the

base price, saves energy and gives you a solid, flexible management tool.

2. Control Link Central: Real people at Musco, 24/7, support the operation of your lights . . . from office, field or home . . . benefits field users and neighbors.

Ultimate guaranteeWith Green Generation Lighting, Muscos Constant 25 guarantees it all for 25 years, plus free relamping at the end of the lamps rated life. All of this is assured by Muscos field service department and their technicians.

LightStructure Green is the result of more than a dozen inventions and innovations from more than 10 million dollars of research and capital investment by Musco.

2005, 2008 Musco Lighting B-200-5

1. Poletop Luminaire Assembly

2. Wire Harness

3. Steel Pole

4. Electrical Components Enclosure

5. Precast Concrete Base

800/825-6030www.musco.come-mail: [email protected]

Musco products are protected by one or more of the following patents. U.S. Patents: 4994718; 5075828; 5134557; 5161883; 5229681; 5377611; 5398478; 5423281; 5426577; 5600537; 5794387; 5856721; 6036338; 6203176; 6250596; 6340790; 6398392; 6681110; 6833675; 6929385; 6969034; 6988697; 7059572; 7171793; 7176635; 7209958; 7216437; D337168; D353797; D353911; D411096; D567179; D567422; D567432; D567433; D571033; D573752; D575181. Australia Patents: 780583. Canada Patents: 89366; 2009749; 2026850; 2027033; 2035014; 2058261; 2103874; 2110014; 2200511; 2200515; 2378279; 2378283; 2378318; 2407922; 2407924. China Patents: ZL30139426.7. EPC Patents: 440531; 1192793; 000376496-0002. France Patents: 440531. Germany Patent: 440531. Ireland Patent: 1192793. Mexico Patent: 175863. Norway Patent: DESIGNREG.NR.: 79633. Russia Patent: 61440. Spain Patent: 440531. Taiwan Patent: I263753. Vietnam Patent: 9692. Other patents pending.

Complete Luminaires (See page 3 and page 4 for details on luminaire configurations.)

GL18 18" Gullwing LED Luminaire - Constant WattageGL18-DCC 18" Gullwing LED with Dual Circuit ControlGL18-DIM 18" Gullwing LED with 0-10V DimmingGL18-MR501 18" Gullwing LED with Motion Response - 50% LowGL18-APD2 18" Gullwing LED with Automatic Profile DimmingGL18-APD-MRO1 18" Gullwing LED - APD with Motion Response Override

Retrofit Kit (See page 4 for details on retrofit kit configurations.)

GL18-RK 18" Gullwing LED Retrofit Kit - Constant Wattage

Job:Type: Notes:

Gullwing LEDGL18 Area LuminairesPage 1 of 4

Philips Gardco Gullwing LED luminaires combine LED performance excellence and advanced Gardco LED thermal management technology with the distinct Gullwing style to provide outdoor area lighting that is both energy efficient and aesthetically pleasing. The Philips Gardco Gullwing LED is defined by its high performance, sleek profile and rugged construction. The housing is one-piece, die cast aluminum and mounts directly to a pole or wall without the need of a separate support arm. The advanced LED optical systems provide IES Types II, III, IV and V distributions. The luminaire features a state of the art integral thermal control system to maximize LED performance and life, and to extend component life. All LED wattages utilize high performance Class 1 LED systems. The door frame is single-piece die cast aluminum. Luminaires are finished with a fade and abrasion resistant TGIC powdercoat. Gullwing LED luminaires provide full cutoff performance. Existing Philips Gardco Gullwing HID luminaires are suitable for field retrofit with the Gullwing LED retrofit kit.

PREFIX MOUNTING

LED wATTAGE AND LUMEN VALUES

1 Single Pole Mount2 Twin Pole Mount at 1802@90 Twin Pole Mount at 903 3-way Pole Mount at 903@1203 3-way Pole Mount at 1204 4-way Pole Mount w Wall Mount, Recessed J-Box wS Wall Mount, Surface Conduit


G200-016/1111

Enter the order code into the appropriate box above. Note: Philips Gardco reserves the right to refuse a configuration. Not all combinations and configurations are valid. Refer to notes below for exclusions and limitations. For questions or concerns, please consult the factory.

OPTICAL SYSTEM

24

34 44 55 BLC4

3. Not available with PTF option.

Type IIType IIIType IVType VBacklight Control

VOLTAGEMOUNTINGPREFIXOPTICAL SYSTEM LED wATTAGE FINISH OPTIONSLED SELECTION

Ordering Code

Average System Watts6

LED Current(mA)

LED Selection

Luminaire Initial Absolute Lumens7,8

TYPE 2 TYPE 3 TYPE 4 TYPE 5 BLC

Single LED Arrays

65LA 65 350 CW 5,211 4,988 (s) 4,986 6,025 3,433 (s)

95LA 95 530 CW 7,437 7,025 6,973 8,258 4,640 (s)

130LA 130 700 CW 8,868 8,658 8,478 10,223 5,614 (s)

Dual LED Arrays

125LA 125 350 CW 9,953 9,550 9,360 11,241 5,917 (s)

200LA 200 530 CW 13,432 13,042 12,942 15,271 7,996 (s)

255LA 255 700 CW 16,209 15,740 15,529 18,254 9,436 (s)

6. Wattage may vary by +/- 8% due to LED manufacturer forward volt specification and ambient temperature. Wattage shown is average for 120V through 277V input. Actual wattage may vary by an additional +/- 10% due to actual input voltage. 7. Values shown are for luminaires without the HS or IS shield options. Tests are in process for many NW and all WW, as well as luminaires with the HS and IS options. 8. Lumen values based on tests performed in compliance with IESNA LM-79. (s) following value indicates that the value is scaled from tests on a similar, but not identical luminaire configuration. Contact Gardco.applications@ philips.com if any approximate estimates are required for design purposes.

1. Motion Response luminaires require one motion sensor per pole, ordered separately. See Accessories on page 2. Motion Response luminaires available 120V or 277V only.2. Available 120V through 277V only.

4. Optics are field rotatable.5. Features unitized lens.


G200-016/1111

Page 2 of 4

Gullwing LEDGL18 Area Luminaires

9. Not available above 277V. 10. Required for 3" O.D. round or tapered round poles where top O.D. is less than 4".11. Required for 4"- 5" O.D. round poles.12. Mounts to a 2-3/8" O.D. mast arm.13. Mounts to a 2-3/8" Top Tenon. Specify a round pole with a 4.50" O.D. for a smooth transition. 14. Not available in 120 mounting configurations.15. Requires a 2-3/8"O.D. x 4" tenon or a 2.4" round pole top O.D. Specify Drilling (1, 2, 2@90, 3 or 4 only.)16. Available with GL18-RK retrofit kits (as well as other configurations.) 17. Not available in GL18-DCC.18. Available in GL18 Constant Wattage only.19. Available with Type 2, Type 3 or Type 4 distributions only.

FINISH OPTIONS (Options are not available in GL18-RK retrofit kits, except as specifically noted below. See Note 16)BRP Bronze Paint

BLP Black Paint

wP White Paint

NP Natural Aluminum Paint

OC Optional Color Paint Specify Optional Color or RAL ex: OC-LGP or OC-RAL7024.

SC Special Paint Specify. Must supply color chip.

LF16 In-Line/In-Pole Fusing PC9,18 Photocontrol and Receptacle PCR18 Photocontrol Receptacle onlyHS16 External Houseside ShieldIS16,19 Internal Houseside ShieldRPA110 3" Round Pole AdapterRPA211 4" and 5" Round Pole AdapterMF12 Mast Arm FitterTR113 Single TransitionTR213 Twin TransitionPTF214 Pole Top Fitter - 2 3/8" - 3" Dia. TenonPTF314 Pole Top Fitter - 3" - 3 1/2" Dia. TenonPTF414 Pole Top Fitter - 3 1/2" - 4" Dia. TenonSQPTF15 Square Pole Top FitterDL16 Diffusing Lens (reduces performance significantly)CLR16 Clear Glass Lens (reduces performance)

SPR Surge Protection for 120V through 277V InputSPRH Surge Protection for 347V through 480V Input SPRA17 Surge Protection for 120V through 277V Input meeting ANSI C62.41.2SPRAH17 Surge Protection for 347V through 480V Input meeting ANSI C62.41.2

ACCESSORIES (Ordered separately)MS-P 120V or 277V Input - Pedestrian Motion Sensor for GL18-MR (Motion Response) or GL18-APD-MRO (Automatic Profile Dimming with Motion Response Override)MS-A-120V 120V Input - Area Motion Sensor for GL18-MR (Motion Response) or GL18-APD-MRO (Automatic Profile Dimming with Motion Response Override)MS-A-277V 277V Input - Area Motion Sensor for GL18-MR (Motion Response) or GL18-APD-MRO (Automatic Profile Dimming with Motion Response Override)

Motion Sensors are ordered separately, with one (1) motion sensor required per pole location for GL18-MR or GL18-APD-MRO luminaires. See Luminare Configuration Information on page 3 for more details. Pedestrian sensor color is white. Area motion sensor color is Arctic White.

A

C

31.6"80.264 cm 18"

45.72 cm

6.6"16.764 cm

11.5" 29.21 cm

DIMENSIONS AND EPA

31.6

11.1

6.6

18.2

6.9

Prefix:

Distribution:

Finish:

Options:

Prefix Distribution Voltage Finish Options

MountingConfiguration:

PPSS GL18.CDR

GL18GL18-DIMGL18-MR50GL18-MR90GL18-RKGL18-APD

3

3

3

3

3

2 = 2 Type3 = 3 Type4 = 4 Type5 = 5 Type

UNIV347-480

4

4

BRPBLPWPNPSCOC

FLFDLPCPCRDCC

PTF2,3,4SPR, SPRH

SPRA, SPRAHMFHHS

7

3

2

5

5

5

5

5

F=Fusing 120V-277V L DL=Diffusing LensPC= Photocontrol & Receptale PCR= Only PTF=Pole Top FitterSPR=Surge Protector UNIV SPRH=

F= Line Fusing HSS=External House SideSheildPhotocontrol ReceptaleSurge Protector 347/480 MF=Mass Arm Fitter

SPR=Surge Protector UNIV ANSI C62.41.2 SPRH=Surge Protector 347/480 ANSI C62.41.2

BRP=BronzeBLP=Black

NP=NaturalWP=White

GL18= Gullwing LED GL18-DIM= GL18 /w 0-10V DimmingGL18-MR50= G18 LED Motion Response with 50% Bi-Level and Pole Mounted SensorGL18-MR90= Gl18 Motion Response with 90% Dimming and Arm Mounted SensorGL18-RK=Gullwing LED Retro Kit GL18-APD= Auto Profile Dimming

2 = IES Type 2 Distribution4 = IES Type 4 Distribution

12

2 @ 903

3 @ 1204

Wattage

OC=Optional ColorSC=Special Color

PRELIMINARY PRODUCT SPECIFICATION SHEET

Wattage:

Voltage: UNIV = 120 - 277VAC 347=347VAC 480=480VAC

GL18 LED8/18/10 REV B

Page 1

Gardco Lighting1611 Clovis BarkerSan Marcos, TX 78667

70W = 56LED @ .35A110W = 56LED @ .53A140W = 56LED @ .70A

130W = 112LED @ 350mA210W = 112LED @ 530mA280W = 112LED @ 700mA

2

2

2

1 = Single Assembly 2 = Twin Assembly2 @ 90 = Twin Assembly at 90

3 = Triple at 90 3 @ 120 = Triple Assembly at 120 4 = Quad

Configuration

3 = IES Type 3 Distribution5 = IES Type 5 Distribution

70W = 56 XP-G LEDs @ 350mA110W = 56 XP-G LEDs @ 530mA140 W= 56 XP-G LEDs @ 700mA

1. Product Prefix options cannot be specified together.2. Dual Drivers (130,210,and 280W) have to be specified.3.DCC option Not Available 4.On all Drivers

6.CCT is within ANSI tolerances7 8.GL18-RK cannot have these options.

50/60 Hrz5. Field installed Kits

Glare Reduction Lens Effect Distribution

LED Type

CW = 6500KNW = 4000K

6

6

130W = 112 XP-G LEDs @ 350mA210W = 112 XP-G LEDs @ 530mA280W = 112 XP-G LEDs @ 700mA

LED DOORASSEMBLY

EXISTING UPPERHOUSING

GL18-RK LED Retrofit Kit

Existing Upper Housing

LED Door Assembly

11.2 ft2.12 m2

EPA Data

22.4 ft2.24 m2

3-43.2 ft2.30 m2

Approximate WeightSingle Luminaire

40 lbs / 18.144 kg

Note: Removal of all components of existing G18 Gullwing luminaires, except the upper housing, is required to perform a retrofit. GL18-RK includes all necessary retrofit components.

Note: TGIC polyester powdercoat will fade somewhat in exterior environments over time. Once the retrofit kit is installed, there is a possibility that the upper housing may have faded to a point where there is a noticeable paint difference between the upper housing (existing) and the retrofit kit door frame.

LED SELECTION VOLTAGECw Cool White - 6000K - 75 CRI Nw Neutral White - 4000K - 75 CRIww Warm White - 3000K - 75 CRI

UNIV 120V through 277V, 50hz or 60hz

HVU 347V through 480V, 50hz or 60hz (High Voltage Universal)

Additional Hand Hole 15' Above Pole Base(oriented 180 to the standard hand hole)

Motion Sensor

Cover Plate with 1/2" NPT Coupling (supplied with pole)

Wiring in

Pole

Mounting to a Philips Gardco Pole

Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole

Neutral

120V OR 277V power input

BlackSensor

White

Red Red Connects to Override Input (Orange) Line of DynaDimmer

Black, 120V OR 277V Input

White - NeutralSensor

Page 3 of 4

LUMINAIRE CONFIGURATION INFORMATION (CONTINuED ON PAGE 4)


G200-016/1111


100%

100%

50% 50%

Power On Mid Point

2 Hours 6 Hours

Power Off

Red Connects to Override Input (Orange) Line of DynaDimmer

90

9.5ft(3m)

25ft(8m)

52.5ft(16m)

8ft(2.4m)

9.5ft(3m)

25ft(8m)

52.5ft(16m)

8ft(2.4m)

270 Front Coverage

90

1H

Height

6H3H

Distances are approximate.

H= Height Above Ground

Side Coverage Pattern Top Coverage Pattern

1H2H 2H

Distances are approximate. H = Height above ground.

GL18: Philips Gardco Gullwing LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized.

GL18-DCC: Philips Gardco Gullwing LED luminaire provided with dual circuiting, permitting separate switching of each led array. Available on luminaires with dual led arrays only.

GL18-DIM: Philips Gardco Gullwing LED luminaire provided with 0 -10V dimming for connection to a control system provided by others.

GL18-MR-50: Philips Gardco Gullwing LED luminaire with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes.

This configuration is not available for use with wall mounted luminaires.

GL18-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input.

The Pedestrian PIR motion sensor is the WattStopper HB350W-L3. One motion sensor per pole is required and is ordered separately as the MS-P accessory, see page 2. The Pedestrian sensor accept 120V through 277V input.

The pedestrian motion detector provides coverage equal to the sensor height above ground , in all directions from the sensor (360.)

Pedestrian PIR Motion Sensor Coverage Pattern:

The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MS-GLA-120V) or the WattStopper EW-200-277-W (277V Input - MS-GLA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input.

The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270 from the front-center of the sensor.

Area PIR Motion Sensor Coverage Pattern:

Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180 to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole.

GL18-APD: Philips Gardco Gullwing LED luminaire with Automatic Profile Dimming. Luminaire is provided with the Philips DynaDimmer module included. The DynaDimmer module is programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point.

GL18-APD is available in 120V through 277V input only.

GL18-APD Dimming Profile:

of 4


GENERAL DESCRIPTION: The Philips Gardco Gullwing LED is defined by its high performance, sleek profile and rugged construction. The housing is one-piece, die cast aluminum and mounts directly to a pole or wall without the need of a separate support arm. Gullwing LED luminaires combine LED performance excellence and advanced Philips Gardco LED thermal management technology with the distinct Gullwing style to provide outdoor area lighting that is both energy efficient and aesthetically pleasing.

HOUSING: A one-piece die cast aluminum housing mounts directly to a pole or wall without the need for a support arm. The low profile rounded form reduces the effective projected area of the luminaire to only 1.2 ft2 /.12 m2.

IP RATING: Gullwing LED 18" luminaires have a rating of IP66.

LED RELIABILITY:

PREDICTED LUMEN DEPRECIATION DATA

Ambient Temperature C Driver mA L70 Hours20

25 C

350 mA 130,000

530 mA 100,000

700 mA 70,000

40 C

350 mA 100,000

530 mA 70,000

700 mA 50,000

20. Predicted performance derived from LED manufacturers data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output.

THERMAL MANAGEMENT: The Philips Gardco Gullwing LED provides die cast aluminum integral thermal radiation fins combined with lateral air ways, to provide the excellent thermal management so critical to long LED system life.

OPTICAL SYSTEMS: LED arrays are set to achieve IES Type II, Type III, Type IV,Type V , and Backlight Control (BLC) distributions. Individual LED arrays are replaceable. Types II, III and IV optical systems are field rotatable. Luminaires feature high performance Class 1 LED systems.

ELECTRICAL: Luminaires are equipped with an LED driver that accepts 120V through 277V, or 347V through 480V, 50hz to 60hz, input. Driver output is based on the LED wattage selected. Component-to-component wiring within the luminaire will carry no more than 80% of rated current and is listed by UL for use at 600 VAC at 302F / 150C or higher. Plug disconnects are listed by UL for use at 600 VAC, 15A or higher. Power factor is not less than 90%. Luminaire consumes 0.0 watts in the off state. All motion sensors utilized consume 0.0 watts in the off state.

FINISH: Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors.

LABELS: All luminaires bear UL or CUL (where applicable) Wet Location labels.

wARRANTY: Philips Gardco luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. See Warranty Information on www.sitelighting.com for complete details and exclusions.

SPECIFICATIONS


G200-016/1111

FULL CUTOFF PERFORMANCE: Full cutoff performance means a luminaire distribution where zero candela intensity occurs at an angle at or above 90 above nadir. Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10 percent) at a vertical angle of 80 above nadir. This applies to all lateral angles around the luminaire.

LUMINAIRE CONFIGURATION INFORMATION (CONTINuED FROM PAGE 3) GL18-APD is available in 120V through 277V input only.

The GL18-APD offers many of the advantages of a sophisticated control system, including an average energy savings of at least 33% versus constant wattage, constant light output systems, without the need for a control system.

GL18-APD-MRO: Philips Gardco Gullwing LED luminaire with Automatic Profile Dimming, with Motion Response Override. The GL18-APD-MRO combines the benefits of both automatic profile dimming and motion response. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for the GL18-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes.

This configuration is not available for use with wall mounted luminaires.

GL18-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor.

The GL18-APD-MRO has the same pole requirements and utilizes the same motion sensors as the GL18-MR-50. The motion sensor mounts and wires

identically as well. The GL18-APD-MRO utilizes the identical dimming profile as shown for the GL18-APD.

By combining the benefits of automatic profile dimming and motion response, the GL18-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected.

Note: All motion sensors utilized consume 0.0 watts in the off state.

GL18-RK: Philips Gardco Gullwing LED Retrofit kit for existing Gullwing

luminaires. The retrofit kit provides a simple way to convert existing sites that utilize Gullwing luminaires to LED. The retrofit kit includes all necessary components to complete the retrofit conversion. The existing optic, ballast tray and door assembly are removed and replaced by retrofit kit components. The retrofit kit includes the complete door frame and the LED driver assembly.

The GL18-RK is available only in a constant wattage, constant light output design, and is not available with any Options, except as specifically indicated on page 2.

Note: TGIC polyester powdercoat will fade somewhat in exterior environments over time. Once the retrofit kit is installed, there is a possibility that the upper housing may have faded to a point where there is a noticeable paint difference between the upper housing (existing) and the retrofit kit door frame.

LANDSCAPE FURNITURE PRODUCT SHEETS

sustainability data sheet

With our roots in the landscape and a stated purpose to Enrich Outdoor Spaces, Landscape Forms has a special relationship to the natural environment. We have always been mindful that as we design and manufacture products that are acted upon by the environment, we act upon it in turn. Environmental sustainability is completely consis-tent with our purpose, our goals, our values and our principles. We make stewardship of the environment a vital part of our business.

To learn more about our sustainability initiatives, refer to our Environmental Statement.

escofet In the course of its history, ESCOFET 1886 SA has forged a corporate philosophy using the criteria of respect for the environment, workplace security and safety, and quality. This same philosophy was the motivation for our Environmental Management System, which culminated in 2005 with the ISO 14001 Standard. In 2008, ESCOFET 1886 S.A incorporated the OHSAS 18001 Workplace Security and Health Standard into the companys management system as part of our ongoing improvements, with official certification in 2010. Our voluntary inclusion of these new standards with a view to meeting social and environmental demands are clear proof of ESCOFETs desire and commitment to ongoing improvements and the inclusion of a value-added people- and environment-friendly component in its products.

care and maintenanceMilenio is designed and engineered to live a long, useful life in outdoor spaces without the use of chemical cleaners to maintain the finish. The durability, longevity and low maintenance of our products contribute to responsible stewardship of the earthss resources.

Cast Stone: Cast stone requires little to no maintenance from the effects of weathering and aging. Maintenance, however, may be performed using the following guidelines:

General cleaning of cast stone and UHPC: Routine cleaning can be done with clean soft cloths using water or mild detergents. For more aggressive cleaning use high-pressure hot water washing. In extreme cases detergents may be required. Never use carbon steel wire brushes as minute amounts of steel from the brush will be embedded into the concrete surface resulting in rust staining. If brushes are required, use natural stiff bristle brushes with clean potable water. This should be sufficient for most general cleaning requirements.

Graffiti removal: To clean graffiti, determine what was used to deface the concrete surface. For spray paints, remove as much as possible mechanically with a stiff natural bristle brush. Never use mineral spirits as these will dissolve the paint and can carry pigments deeper into the concrete. Use a cotton cloth soaked with acetone to blot off the paint.

Smooth sealed surfaces: To remove food residues and oils on these surfaces, use a small amount of distilled vinegar diluted by half with clean potable water in a clean soft cloth or sponge well wrung out. Diluted mild detergents and dish soaps are also acceptable. Wipe surface, then immediately wipe with clean potable water and dry with a clean dry cloth. Some cast stone sur-faces are factory-sealed for a degree of stain-resistance (but are not stain-proof). Due to the porous nature of cast stone, even with factory-applied sealer, regular maintenance is the best safeguard against staining. Do not allow spills to set. Sealed stone cannot be warranted against staining, cracking or scratching. Never use non-neutral or abrasive cleaners.

recycled contentMilenio has 0% recycled content, but is 100% recyclable.

MilenioOctober 2012

800.430.6209 Milenio Bench Sustainability Data Sheet

may

oTh

e si

mp

le,

rob

ust

form

of

this

han

dso

me

bac

kles

s b

ench

pro

ject

s a

sens

e o

f

rigo

r an

d s

tren

gth

with

out

imp

osi

ng

on

its e

nviro

ns.

Gen

ero

us s

qua

re s

eat

p

erfo

ratio

ns c

reat

e a

pat

tern

tha

t ca

sts

shad

ow

s an

d p

rovi

des

an

inte

rest

ing

co

ntra

st t

o n

atur

al a

nd p

aved

gro

und

surf

aces

in t

he u

rban

land

scap

e.

Des

ign

er:

Cru

z y

Ort

iz A

rqu

itec

tos

mile

nio

This

co

ntem

po

rary

urb

an f

urni

ture

is

a ra

dic

ally

diff

eren

t m

od

ular

sys

tem

o

f g

eom

etric

ele

men

ts.

One

can

sit

o

n it

o

r o

n th

e g

roun

d b

esid

e it,

w

here

it s

erve

s as

a s

pac

e d

efin

er

and

bac

kres

t. S

trai

ght

, le

ft-a

ngle

d a

nd

right

-ang

led

mo

dul

es u

sed

sin

gly

or

in

mul

tiple

s fo

rm c

reat

ive

com

bin

atio

ns.

Des

ign

er:

EX

P a

rch

itec

tes

DSA SHELTERS

www.poligon.com12

Cantilevered Walkway Shelters (MSL)The cantilevered walkway shelter comes with columns spaced anywhere between 8 to 20 and can be configured as a straight covered walkway or it can bend and turn with your site. Poligon offers bolt-together steel frame systems for quicker construction times, saving you both time and money. For more ideas, visit Poligons web site at www.poligon.com to see more photos and to request a full catalog.

MSL 12 x 200 PC Number

MSL 15 x 80 PC NumberMSL 12 x 60 PC Number

with PC Number

Contact your Poligon sales representative for most recent PC number

DSA SHELTERS

[email protected] 13

Cantilevered Walkway Configurations MSL

Cantilevered Walkway Shelters MSL

Dimensions

L W H Bay Size

PC #

MSL 12 x 20 U 12 10-15 8 - 20 Available

MSL 15 x 20 U 15 10-15 8 - 20 Available

W

L

H

MSL 90 Turn Plan

MSL Variable Turn Plan

Elevation 1

Elevation 2

Elevation 1

Elevation 2

Perspective Perspective

U- Unlimited

1/412

DSA SHELTERS

[email protected] 15

The most important factors contributing to Poligons success and repeatedly delivering high quality shelters are our paint line operators. These craftsmen take great pride in their work and realize they are not just painting, but finishing shelters that will

become important landmarks and symbols of a communitys image.

Expect the best for your community make sure you specify Poli-5000.

FRAME AND ROOF COLORS

Glacier White*

Tudor Brown*

Terracotta*

Harbor Blue*

Almond

Patrician Bronze

Pomegranate

Atlantic Blue

Surrey Beige*

Bumper Black*

Canterbury

Sherwood Forest

Canvas Taupe

Ash Gray*

Olive Tree*

Suede

Fox Hollow Gray

Hunter Green*

Coastal Khaki

Greystone*

Mountain Spruce

Medium Bronze

Colonial Red

Galvalume Plus

Surrey Beige

Brite Red

Regal Blue

Almond

Matte Black

Roman Blue

Copper Penny*

Sandstone

Dark Bronze

Hartford Green

Silver Metallic*

Bone White

Patrician Bronze

Evergreen

Charcoal

Regal White

Mansard Brown

Patina Green

Slate Gray

Frame Colors

Metal Roof ColorsTudor Brown

Brandywine

Ash Gray

Barkwood

Slate

Niagra River

*Premium colors are available with a slight upchargeAll Colors are an approximate match. Please call to request a true color sample.

*Colors are also available in a textured finish with a slight upcharge

OU

TRIG

GER

S Arcadia has a sun shade solution for virtually every building need and requirement. We have a solution for commercial, institutional, multiple-story, interior, custom sun shades. Our distinctive sun shades and related components are designed and manufactured according to stringent architectural requirements.

3"

SSCT500

3-1

6"

138"

Square Bracket

3"

SSCT500 Mod

3-2

6"

138"

Square Bracket Jamb

3"

SSCT500 Mod

3-3

8"

138"

Tappered Bracket

34

3"

SSCT500 Mod

3-4

8"

138"

Tappered Bracket Jamb

34

Custom

3-5 "T" Bracket 3-6 SSG Intermediate Bracket

Custom

3-7 "L" BracketCustom

3-8 SSG End Bracket

Custom

612"

338"

4"

458"

1'

2"

338"

434"

4"

12"

10"

418"

2" 3-9

412"

4 116"

6"

ELCLIP

3-10 Turn Buckle 3-11 Turn Buckle Bracket 3-12 90 Corner Bracket

Accessories

180 Pivot For Angled Conditions.

Welded Metal Tab With Hole For Attaching Clevis Pin.(options: Eye Bolt, Welded Pad Eye Or Welded Half Link).Confirm Sizes With ManufacturerOr Engineer.

2 916"

As of: 08/21/12SUNSHADE-ARCADIA-STANDARD-ALL-SERIES.pdf

Scale:

Function:Description:

Detail:OFSHEET

Z:\01 UPDATED FILES\01 CAD\04 SUN CONTROL\01 BRISE SOLEIL STANDARD SERIES\SERIES\SUNSHADE-ARCADIA-STANDARD-ALL-SERIES.DWGDarren Behner

Brise SoleilStandard Series

Sun ShadeBracket Options1/4" = 1'-0" 3 4

OutriggerLouverFascia

:Straight Square:Rectangular:Closed Deep 4 Rectangular


:Straight Square:Rectangular:Closed Deep 4 Rectangular


:Straight Square:Rectangular:Closed Shallow 4 Rectangular


:Angle Square:Airfoil:Closed Deep 4 Rectangular


:Angle Square:Rectangular:Closed Small 4 Rectangular


:Straight Round:Circular:Closed 4 Circular

As of: 04/24/12SUNSHADE CATALOG2.pdf

Scale:


Detail:OFSHEET

C:\USERS\KWALUYO.ARCADIAINC\DOCUMENTS\KORNELIUS' DOCUMENT\DESIGN\SUN SHADES\SUNSHADE CATALOG2.DWGKwaluyo

SUN SHADESHORIZONTAL CONFIG. OPTIONS

SUN CONTROLALL########## 1 1

OUTRIGGER : STRAIGHT TUBELOUVER : ARCHEDFASCIA : CLOSED HM434R

OUTRIGGER : STRAIGHT SQUARELOUVER : AIRFOILFASCIA : CLOSED HM434R








Scale:


Detail:OFSHEET













Scale:


Detail:OFSHEET













Scale:


Detail:OFSHEET













Scale:


Detail:O

ECCL Section 4 ProjectManual Planning

Documents

Transcript of ECCL Section 4 ProjectManual Planning