Ecartement 64mm (2''1/2) · notes: the original design and built of this loco is by mr. steve eaton...
20
Ecartement 64mm (2''1/2) On trouvera ici des renseignements, des plans etc. sur les machines à l'écartement 64mm: http://www.n25ga.org/ L'écartement 64mm est apparu vers 1900. Aujourd'hui il est nommé Gauge 3. Il correspond à une échelle 1:22,6 par rapport à une voie standard. Les travaux de Lilian Lawrence, connu sous le nom de plume LBSC, ont transformé ce qui était de simples jouets, certains mus par moteur à ressort, en véritables machines qui permettaient de tirer son constructeur sur une voie plane. Cet écartement G3 a pratiquement disparu au profit de l'écartement 89mm (3''1/2) qui lui même a cédé le pas face au 124mm (5''). C'est dommage car cette échelle en écartement 64mm donnait des machines parfaitement manoeuvrables, peu coûteuses, peu encombrantes et moins délicates à construire que leurs petites homologues à l'écartement 45mm. Ce dernier écartement de 45mm est appelé aujourd'hui échelle G, échelle qui est devenu le standard des trains de jardin. La plupart des design pour le 64mm peuvent être adaptés à l'écartement 89mm Toby, une machine efficace et ultra simple Steve Eaton est le créateur de cette machine de débutant. On le voit ci-après conduisant Ayesha une des plus célèbres locomotives crées par LBSC pour le 64mm. Voici un extrait de son article d'introduction de la machine Toby. « Après avoir lu un article sur les machines en voie étroite susceptibles d'être modélisées à l'écartement 2''1/2 , je fus acquis à cette idée de voie étroite, donnant une machine grosse pour cet écartement et décidais d'en fabriquer une simple et rapide à construire. Elle devrait être aussi simple que possible à construire utilisant essentiellement du profilé et des fonderies disponibles. Les roues, le dôme vapeur, la porte de la boîte à fumée sont les mêmes que la Tich 1 et donc 1 Tich création LBSC
Transcript of Ecartement 64mm (2''1/2) · notes: the original design and built of this loco is by mr. steve eaton...
Ecartement 64mm (2''1/2)On trouvera ici des renseignements, des plans etc. sur les machines à l'écartement 64mm: http://www.n25ga.org/
L'écartement 64mm est apparu vers 1900. Aujourd'hui il est nommé Gauge 3. Il correspond à une échelle 1:22,6 par rapport à une voie standard. Les travaux de Lilian Lawrence, connu sous le nom de plume LBSC, ont transformé ce qui était de simples jouets, certains mus par moteur à ressort, en véritables machines qui permettaient de tirer son constructeur sur une voie plane. Cet écartement G3 a pratiquement disparu au profit de l'écartement 89mm (3''1/2) qui lui même a cédé le pas face au 124mm (5''). C'est dommage car cetteéchelle en écartement 64mm donnait des machines parfaitement manoeuvrables, peu coûteuses, peuencombrantes et moins délicates à construire que leurs petites homologues à l'écartement 45mm. Cedernier écartement de 45mm est appelé aujourd'hui échelle G, échelle qui est devenu le standard destrains de jardin. La plupart des design pour le 64mm peuvent être adaptés à l'écartement 89mm
Toby, une machine efficace et ultra simpleSteve Eaton est le créateur de cette machine de débutant. On le voit ci-après conduisant Ayesha une des plus célèbres locomotives crées par LBSC pour le 64mm.
Voici un extrait de son article d'introduction de la machine Toby.
« Après avoir lu un article sur les machines en voie étroite susceptibles d'être modélisées à l'écartement 2''1/2 , je fus acquis à cette idée de voie étroite, donnant une machine grosse pour cet écartement et décidais d'en fabriquer une simple et rapide à construire. Elle devrait être aussi simple que possible à construire utilisant essentiellement du profilé et des fonderies disponibles. Les roues, le dôme vapeur, la porte de la boîte à fumée sont les mêmes que la Tich1 et donc
1 Tich création LBSC
immédiatement disponibles. Les excentriques et les cylindres sont ceux de l'Eagle2...Ayant regardé de nombreux design de profils de machines NG j'ai pris le meilleur de chaque et le résultat est « Toby », d'après le surnom de mon fils.
Des caisses à eau longues ont été choisies, bien que, comme on le verra ce ne sont pas du tout leur fonction. Mais elles ajoutent du poids au bon endroit, sur les roues motrices. Un concept 0-4-2 a été choisi pour donner plus de stabilité qu'un 0-4-0.
La chaudière est inhabituelle pour cette échelle, du type marine circulaire. Elle plus aisée à fabriquer qu'une chaudière conventionnelle de locomotive et utilise des tubes standard.
La locomotive à prouvé être une bonne rouleuse, à bien des égards aussi bonne que beaucoup de machines en 3''1/2, aussi simple à conduire qu'à construire, et cela pour une fraction du coût.
Vous pouvez la construire sur un petit tour, bien que ceux ayant une fraiseuse auront la vie plus facile. Si vous n'avez pas de chariot vertical sur votre tour, le travail peut être exécuté avec un scie et des limes ce qui, en fait, peut souvent être plus rapide
Donc, si vous souhaitiez un machine simple, peu coûteuse et qui donne du plaisir sur un grand tracé de club ou une courte ligne dans votre jardin, jetez un oeil sur Toby... »
Caractéristiques principales Inches mm
Longueur totale 15 381
Largeur 6 152,4
Hauteur 12 304,8
Diamètre roue motrice 2 1/16 27
Diamètre roue menée 1 1/2 38,1
Cylindres:alésage x course 3/4 x 1 1/8 19 x28,6
Distribution : excentrique intérieur à glissement
Chaudière : boîte à feu circulaire avec surchauffeur à rayonnement
Pression de la chaudière 100 psi max Environ 7 bars
Taille du foyer 2 1/2 x 3 1/2i approx. 63,5 x 89
Ci-dessous croquis original du projet Toby par Steve Eaton
2 Eagle création Martin Evans
Cette machine a eu succès comparable à « Sweet Pea » en 5'', cette dernière participant de la même philosophie.
Variantes sur base TobySur la base de Toby des variantes ont vu le jour, en voici quelques unes.
Festiniog railway « Blanche »
Switcher style
Garrat Style
Forney style
Julius de Waal nous offre aujourd'hui les plans de Toby en métrique.
27.94 2.50
10.49
6.50
ALL MEASUREMENTS ARE IN INCHES
GENERAL ARRANGEMENT AND NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)PROJECT No 07B-10-00
J.A.M. DE WAAL PAPAKURA NZ
ISOMETRIC VIEWSMAY-2016
SHEET: 01 OF 14 No: TOBY-01
DATE
JDWDSJDWDSJDWDSJDWDSPROJECTION
JDW DRAUGHTING SERVICES
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
MODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE CALLED "TOBY".
QTY. PART NUMBER2 TOBY-1-01-SIDE FRAME PLATE1 TOBY-1-02-FRONT BUFFER BEAM1 TOBY-1-03-REAR BUFFER BEAM1 TOBY-1-04-REAR FRAME SPACER1 TOBY-1-05-MID FRAME PLATE SPACER4 TOBY-1-06-AXLE BOX KEEPER4 TOBY-1-07-AXLE BOX2 TOBY-1-08-PULLING COUPLING2 TOBY-1-09-CYLINDER BLOCK2 TOBY-1-10-CYLINDER FRONT COVER1 TOBY-1-11A-RH-CYLINDER REAR COVER1 TOBY-1-11B-LH-CYLINDER REAR COVER2 TOBY-1-12-PISTON ROD GLAND2 TOBY-1-13-CROSS HEAD SLIDE BAR2 TOBY-1-14-CROSS HEAD SLIDE BAR BRACKET4 TOBY-1-15-CYLINDER AUTO DRAINCOCK HOUSING4 TOBY-1-16-CYLINDER AUTO DRAINCOCK VALVE4 TOBY-1-17-CYLINDER AUTO DRAINCOCK CAP1 TOBY-1-18A-LH-STEAM VALVE CHEST1 TOBY-1-18B-RH-STEAM VALVE CHEST2 TOBY-1-19-STEAM VALVE CHEST COVER2 TOBY-1-20-VALVE SPINDLE GLAND2 TOBY-1-21-SNIFTER BODY2 TOBY-1-22-SNIFTER BALL VALVE2 TOBY-1-23-SNIFTER VALVE CAP1 TOBY-1-24-WATER FEED PUMP BODY1 TOBY-1-25-WATER FEED PUMP TOP FITTING1 TOBY-1-26-WATER FEED PUMP BOTTOM FITTING2 TOBY-1-27-WATER FEED PUMP BALL VALVE1 TOBY-1-28-STEAM INLET MANIFOLD4 TOBY-1-29-BANJO FITTING1 TOBY-1-30-STEAM EXHAUST MANIFOLD1 TOBY-1-31-TRAILIN TRUCK PIVOT PIN2 TOBY-1-31-TRAILIN TRUCK SPRING PILLAR2 TOBY-1-32-TRAILIN TRUCK SPRING 1 TOBY-1-33-PULL LINK2 TOBY-1-34-COUPLING LINK PIN
QTY. PART NUMBER1 TOBY-2-01-WHEEL AXLE1 TOBY-2-01-WHEEL AXLE2 TOBY-2-02-LEADING WHEEL2 TOBY-2-03-DRIVING WHEEL2 TOBY-2-04-LEADING WHEEL CRANK PIN2 TOBY-2-05-DRIVING WHEEL CRANK PIN1 TOBY-2-06-WATER FEED PUMP ECCENTRIC1 TOBY-2-07-WATER FEED PUMP ECCENTRIC STRAP1 TOBY-2-08-WATER FEED PUMP PLUNGER1 TOBY-2-09-COUPLING ROD1 TOBY-2-09-COUPLING ROD2 TOBY-2-10-COUPLING ROD FRONT BUSH2 TOBY-2-11-COUPLING ROD REAR BUSH2 TOBY-2-12-CON-ROD2 TOBY-2-13-CON-ROD FRONT BUSH2 TOBY-2-14-CON-ROD REAR BUSH2 TOBY-2-15-PISTON2 TOBY-2-16-PISTON ROD1 TOBY-2-17-CROSSHEAD1 TOBY-2-17-CROSSHEAD2 TOBY-2-18-CROSSHEAD PIVOT PIN2 TOBY-2-19-SLIDE VALVE2 TOBY-2-20-SLIDE VALVE NUT2 TOBY-2-21-SLIDE VALVE SPINDLE2 TOBY-2-22-SLIDE VALVE ECCENTRIC STRAP2 TOBY-2-23-SLIDE VALVEECEN. STRAP ROD2 TOBY-2-24-SLIDE VALVE ECCENTRIC2 TOBY-2-25-SLIDE VALVE ECCENTRIC STOP COLLAR1 TOBY-2-26-TRAILIN TRUCK FRAME PLATE1 TOBY-2-27-TRAILIN TRUCK AXLE BRACKET2 TOBY-2-28-TRAILIN TRUCK BEARING BUSH1 TOBY-2-30-TRAILIN TRUCK WHEEL AXLE2 TOBY-2-31-TRAILIN TRUCK WHEEL1 TOBY-3-01-FOOTPLATE
QTY. PART NUMBER1 TOBY-3-02-SMOKEBOX FRONT PLATE1 TOBY-3-03-SMOKEBOX SHELL1 TOBY-3-04-SMOKEBOX DOOR2 TOBY-3-05-SMOKEBOX DOOR HINGE2 TOBY-3-06-SMOKEBOX HINGE1 TOBY-3-07-SMOKEBOX DOOR SCREW1 TOBY-3-08-CHIMNEY BASE RING1 TOBY-3-09-CHIMNEY FLUE1 TOBY-3-10-CHIMNEY CROWN1 TOBY-3-11-INTERNAL FLUE BASE1 TOBY-3-12-WATER TANK1 TOBY-3-12-WATER TANK2 TOBY-3-13-WATER TANK TOP PLATE2 TOBY-3-14-WATER TANK TOP FILLER COVER6 TOBY-3-15-WATER TANK HAND RAIL POST2 TOBY-3-16-WATER TANK HAND RAIL 2 TOBY-3-17-WATER TANK SUPORT PILLAR1 TOBY-3-18-BLOWER ELBOW1 TOBY-3-19-BLOWER ELBOW LOCK NUT1 TOBY-3-20-BLOWER BLOW PIPE1 TOBY-3-21-BLOWER ELBOW NOZZLE4 TOBY-3-22-SIDE STEP1 TOBY-3-29-SMOKEBOX HINGE PIN1 TOBY-4-01-BOILER SHELL
QTY. PART NUMBER1 TOBY-4-02-BOILER FRONT TUBE PLATE1 TOBY-4-03-FIRE BOX SHELL1 TOBY-4-04-FIRE BOX FRONT TUBE PLATE1 TOBY-4-05-BOILER TUBE 0.5INCH15 TOBY-4-06-BOILER TUBE 0.375INCH1 TOBY-4-07-BOILER THROAT PLATE1 TOBY-4-08-BOILER BACK HEAD PLATE1 TOBY-4-09-BOILER BACK SHELL 2 TOBY-4-10-BOILER BUSH TYPE-14 TOBY-4-12-BOILER BUSH TYPE-31 TOBY-4-13-BOILER BUSH TYPE-41 TOBY-4-14-STEAM COLECTOR DOME2 TOBY-4-15-CHECK VALVE BODY2 TOBY-4-16-CHECK VALVE BALL VALVE2 TOBY-4-17-CHECK VALVE TOP SCREW1 TOBY-4-18-CHECK VALVE MANIFOLD1 TOBY-4-19-BOILER INSULATION BLANKET1 TOBY-4-20-BOILER CLADDING1 TOBY-4-21-CEHECK VALVE DOME1 TOBY-4-22-REGULATOR BODY1 TOBY-4-23-REGULATOR SCREW VALVE1 TOBY-4-24-REGULATOR SPINDLE NUT1 TOBY-4-25-REGULATOR STEAM PIPE1 TOBY-4-26-SUPER HEATER PIPE END-11 TOBY-4-27-SUPER HEATER PIPE END-21 TOBY-4-28-SUPER HEATER PIPE1 TOBY-4-29-PIPE NUT 0.313 1 TOBY-4-30-STEAM MANIFOLD1 TOBY-4-31-FIRE DOOR MOUTING PLATE1 TOBY-4-32-FIRE DOOR2 TOBY-4-33-FIRE DOOR HINGE STRAP1 TOBY-4-34-FIRE DOOR HINGE2 TOBY-4-35-AIR GAP SPACER1 TOBY-4-36-FIRE BOX BAFFLE PLATE2 TOBY-4-37-GRATE SUPPORT BAR1 TOBY-4-38-ASHPAN REAR PLATE1 TOBY-4-39-ASH TRAY2 TOBY-4-40-ASH TRAY HAND RAIL POST1 TOBY-4-41-ASH TRAY HAND RAIL12 TOBY-4-42-GRATE BAR33 TOBY-4-43-GRATE SPACER2 TOBY-4-44-FIRE DOOR REST-HANDLE3 TOBY-4-45-GRATE TIE ROD2 TOBY-4-46-BOILER BUSH TYPE-51 TOBY-5-01-SAFETY VALVE BODY
QTY. PART NUMBER1 TOBY-5-02-SAFETY VALVE BALL VALVE1 TOBY-5-03-SAFETY VALVE STEM1 TOBY-5-04-SAFETY VALVE SPRING1 TOBY-5-05-SAFETY VALVE PRESSURE PLATE1 TOBY-5-06-WTR LVL IND BOTTOM HOUSING1 TOBY-5-07-WTR LVL IND TOP HOUSING1 TOBY-5-08-WTR LVL IND TOP SCREW1 TOBY-5-09-WTR LVL IND GLASS TUBE2 TOBY-5-10-WTR LVL IND GLASS TUBE NUT1 TOBY-5-11A-WTR LVL IND SPINDLE NUT1 TOBY-5-11B-WTR LVL IND SPINDLE1 TOBY-5-12-BANJO FITTING SCREW1 TOBY-5-13-PRESSURE GAUGE BANJO FITTING1 TOBY-5-14-PRESSURE GAUGE1 TOBY-5-15-PRESSURE GAUGE PIPE NUT4 TOBY-5-16-GENERAL ON-OFF VALVE BODY4 TOBY-5-17-GENERAL ON-OFF SPINDLE4 TOBY-5-18-GENERAL ON-OFF VALVE SPINDLE NUT1 TOBY-5-22-BLOWER PIPE PART-11 TOBY-5-23-BLOWER PIPE PART-21 TOBY-5-24-WATER HAND PUMP MOUTING BRACKET1 TOBY-5-25-WATER HAND PUMP CYLINDER INSERT1 TOBY-5-26-WATER HAND PUMP BODY1 TOBY-5-27-WATER HAND PUMP TOP DELIVERY NIPPLE2 TOBY-5-28-WATER HAND PUMP VALVE1 TOBY-5-29-WATER HAND PUMP INLET PLUG1 TOBY-5-30A-WATER HAND PUMP PISTON1 TOBY-5-30B-WATER HAND PUMP PIVOT BRACKET2 TOBY-5-31-WATER HAND PUMP LINK BRACKET1 TOBY-5-32-WATER HAND PUMP HANDLE1 TOBY-6-01-CABIN SHELL
QTY. PART NUMBER2 TOBY-6-02-WINDOW RIM1 TOBY-6-03-CABIN ROOF TRUSS1 TOBY-6-04-LH ROOF BEAM1 TOBY-6-04-LH ROOF BEAM1 TOBY-6-05-CABIN REAR POST1 TOBY-6-05-CABIN REAR POST1 TOBY-6-06-CABIN ROOF TRUSS1 TOBY-6-07-CABIN ROOF2 TOBY-7-01-TNDR SIDE FRAME
QTY. PART NUMBER4 TOBY-7-02-TNDR SIDE FRAME ANGLE BRACKET1 TOBY-7-03-TNDR FRONT BUFFER BEAM1 TOBY-7-04-TNDR REAR BUFFER BEAM2 TOBY-7-05-TNDR PULLING COUPLING1 TOBY-7-06-TNDR SIDE FRAME STAY4 TOBY-7-07-TNDR AXLE BOX HORN4 TOBY-7-08-TNDR AXLE BOX LEAF SPRING4 TOBY-7-09-TNDR AXLE BLOCK4 TOBY-7-10-TNDR AXLE BOX SPRING2 TOBY-7-11-TNDR WHEEL AXLE4 TOBY-7-12-TNDER WHEEL1 TOBY-7-13-TNDR BOTTOM PLATE1 TOBY-7-14-TNDR UPPER BODY OUTER SHELL1 TOBY-7-15-TNDR COAL BUNKER PLATE1 TOBY-7-16-TNDR TOP ACCES HATCH PLATE1 TOBY-7-17-TNDR ACCES HATCH
MATERIAL ABBREVIATIONS:ALU = ALUMINIUM OR DURAL(MIN)BRS = BRASSBRZ = BRONZE OR GUNMETAL (BRZ/GM)CI = CAST IRONCU = COPPERGRA = GRAPHITEMS = MILD STEEL/BRIGHT MILD STEELS/S = SILVER STEEL OR STAINLESS STEELSPS = SPRING STEELPEEK= POLYETHER ETHER KETONESYN = SYNTHETIC MATERIAL SUCH AS VETON, NYLON, TEFLON OR RUBBER
IN GENERAL SYNTHETIC MATERIALS SOULD BE ABLE TO WITHSTAND THE HEAT AND PRESSURE(S) APPLIED TO THEM.
nnn/nnn MEANS THAT EITHER MATERIAL CAN BE USED
OTHER ABBREVIATIONSDP = DEEPPF = PRESS FITPCD = PITCH CIRCLE DIAMETERRM = REAMHEX = HEXACON, 6SIDEDCP = COMPRESSEDKNL = KNURLEDCSK = COUNTERSINKPL = PLACESCF = CLOSE FIT (SIZE FOR SIZE)DAA= DRILL AFTER ASSEMBLYPFAA= PRESSFIT AFTER ASSEMBLYLCT = USE LOCTITELPF = LIGHT PRESS FITTH = THREADED/TAPPEDSA-xxx = SUB ASSEMBLY-xxx
NOTES:0. ALL DRAWINGS ARE IN IMPERIAL MEASUREMENTS1. ALL ENGINEERING PRACTICES SHALL BE APPLIED WITH REGARDS TO HOLE AND SHAFT TOLERANCES.2. WHERE SCREWS OR BOLTS ARE USED THE CLEARANCE HOLES SHALL BE APPROXIMATELY 5% TO 8% LARGER THAN THE MATCHING TAPPED HOLE.3. PREFERABLY ALL TAPPED HOLES AND MATCHING SCREWS AND/OR BOLTS TO BE IMPERIAL FINE. 4. MATERIALS SPECIFIED ON THE DRAWINGS ARE INDICATIVE ONLY. THE BUILDER CAN MAKE HIS/HER OWN MATERIAL CHOICE.5. INQUIRE AT THE APPROPRIATE AUTHORITIES WHETHER OR NOT THIS BOILER REQUIRES A PRESSURE TEST CERTIFICATE.6. ALL CONNECTIONS/JOINTS WHICH HAVE STEAM PRESSURE APPLIED TO IT SHALL BE SILVER/HARD SOLDERED.7. COMPRESSION SPRINGS ARE DRAWN IN COMPRESSED STATE (CP), UNCOMPRESSED STATE IS APPROX 40% TO 60% LONGER THEN COMPRESSED STATE.8. WHERE PREFERRED SCREW OR RIVETED CONNECTIONS CAN BE OMITTED AND PARTS CAN BE BONDED TOGETHER BY USING EITHER HIGH STRENGTH GLUE, EPOXY RESIN, OR SOLDER.9. PARTS WHICH ARE DIRECTLY EXPOSED TO STEAM AND/OR WATER SHOULD BE CONSTRUCTED USING NON-FERROUS OR NON CORROSIVE MATERIAL SUCH AS BRASS, BRONZE, GUNMETAL, STAINLESS STEEL, COPPER OR MONEL.10. THE ORDER IN WHICH THE PARTS/COMPONENTS ARE MANUFACTURED AND THE MODEL IS ASSEMBLED IS ENTIRELY LEFT TO THE BUILDER/MODEL MAKER.11. A COLOUR SCHEME FOR THIS PROJECT IS ENTIRELY LEFT UP TO THE MODEL MAKER.12. THE MANNER IN WHICH THE PARTS/COMPONENTS ARE MANUFACTURED IS ENTIRELY LEFT UP TO THE BUILDER.13. NO FASTENERS ARE SHOWN, SUCH AS SCREWS, BOLTS NUTS ETC. IT IS UP THE BUILDER TO CHOOSE THE APPROPRIATE FASTENERS.14. ERRORS AND/OR OMISSIONS MAY OCCUR IN THE DRAWINGS, DO NOT HESITATE TO CONTACT ME SO THAT THE ERRORS/OMISSIONS CAN BE RECTIFIED.
QTY. PART NUMBER1 TOBY-8-2.5INCH-RAIL
NOTES:0. ALL DRAWINGS ARE IN IMPERIAL MEASUREMENTS1. ALL ENGINEERING PRACTICES SHALL BE APPLIED WITH REGARDS TO HOLE AND SHAFT TOLERANCES.2. WHERE SCREWS OR BOLTS ARE USED THE CLEARANCE HOLES SHALL BE APPROXIMATELY 5% TO 8% LARGER THAN THE MATCHING TAPPED HOLE.3. PREFERABLY ALL TAPPED HOLES AND MATCHING SCREWS AND/OR BOLTS TO BE IMPERIAL FINE. 4. MATERIALS SPECIFIED ON THE DRAWINGS ARE INDICATIVE ONLY. THE BUILDER CAN MAKE HIS/HER OWN MATERIAL CHOICE.5. INQUIRE AT THE APPROPRIATE AUTHORITIES WHETHER OR NOT THIS BOILER REQUIRES A PRESSURE TEST CERTIFICATE.6. ALL CONNECTIONS/JOINTS WHICH HAVE STEAM PRESSURE APPLIED TO IT SHALL BE SILVER/HARD SOLDERED.7. COMPRESSION SPRINGS ARE DRAWN IN COMPRESSED STATE (CP), UNCOMPRESSED STATE IS APPROX 40% TO 60% LONGER THEN COMPRESSED STATE.8. WHERE PREFERRED SCREW OR RIVETED CONNECTIONS CAN BE OMITTED AND PARTS CAN BE BONDED TOGETHER BY USING EITHER HIGH STRENGTH GLUE, EPOXY RESIN, OR SOLDER.9. PARTS WHICH ARE DIRECTLY EXPOSED TO STEAM AND/OR WATER SHOULD BE CONSTRUCTED USING NON-FERROUS OR NON CORROSIVE MATERIAL SUCH AS BRASS, BRONZE, GUNMETAL, STAINLESS STEEL, COPPER OR MONEL.10. THE ORDER IN WHICH THE PARTS/COMPONENTS ARE MANUFACTURED AND THE MODEL IS ASSEMBLED IS ENTIRELY LEFT TO THE BUILDER/MODEL MAKER.11. A COLOUR SCHEME FOR THIS PROJECT IS ENTIRELY LEFT UP TO THE MODEL MAKER.12. THE MANNER IN WHICH THE PARTS/COMPONENTS ARE MANUFACTURED IS ENTIRELY LEFT UP TO THE BUILDER.13. NO FASTENERS ARE SHOWN, SUCH AS SCREWS, BOLTS NUTS ETC. IT IS UP THE BUILDER TO CHOOSE THE APPROPRIATE FASTENERS.14. ERRORS AND/OR OMISSIONS MAY OCCUR IN THE DRAWINGS, DO NOT HESITATE TO CONTACT ME SO THAT THE ERRORS/OMISSIONS CAN BE RECTIFIED.
J.A.M. DE WAAL PAPAKURA NZNEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000 CALLED "TOBY".
JDWDSJDWDSJDWDSJDWDSBILL OF MATERIAL AND NOTESMAY-2016
SHEET: 02 OF 14 No: TOBY-02
PROJECT No 07B-10-00 PROJECTION
DATEJDW DRAUGHTING SERVICES
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
MODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
0.5
0
.5
0.5
0
.5 1
.25
1
.25
1
.25
1
.25
5 5 5 5
0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
0.219 0.219 0.219 0.219 1.187 1.187 1.187 1.187
0.219 0.219 0.219 0.219
0.6
72
0
.67
2
0.6
72
0
.67
2
0.6
72
0
.67
2
0.6
72
0
.67
2
0
.93
8P
CD
0
.93
8P
CD
0
.93
8P
CD
0
.93
8P
CD
0.75 0.75 0.75 0.75
0.063 0.063 0.063 0.063
0
.93
8P
CD
0
.93
8P
CD
0
.93
8P
CD
0
.93
8P
CD
0
.75
RM
0
.75
RM
0
.75
RM
0
.75
RM
0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24
0.594 0.594 0.594 0.594 0.594 0.594 0.594 0.594
0.4
38
0
.43
8
0.4
38
0
.43
8
0.4
38
0
.43
8
0.4
38
0
.43
8
0.6
72
0
.67
2
0.6
72
0
.67
2
0.6
72
0
.67
2
0.6
72
0
.67
2
45° 45° 45° 45°
0
.75
0
.75
0
.75
0
.75
0.062
0.062
0.062
0.062
0.938PCD 0.938PCD 0.938PCD 0.938PCD
0.094 0.094 0.094 0.094
TAKE ALL HOLES OVER FROM 1-18A SCALE 1:2
1.625 1.625 1.625 1.625
1.0
63
1
.06
3
1.0
63
1
.06
3
0.086 0.086 0.086 0.086
BRS
1-18BMIRROR IMAGE OF PART 1-18A
BRS
0.1
23
0
.12
3
0.1
23
0
.12
3
4x
0.4
37
5=
1.7
52
4
x0
.43
75
=1.
75
2
4x
0.4
37
5=
1.7
52
4
x0
.43
75
=1.
75
2
0.125 0.125 0.125 0.125
0.25 0.25 0.25 0.25
8B
A-
5P
L
8B
A-
5P
L
8B
A-
5P
L
8B
A-
5P
L
0.625 0.625 0.625 0.625 0.625 0.625 0.625 0.625
4BA 4BA 4BA 4BA
0.2
5
0.2
5
0.2
5
0.2
5
4BA 4BA 4BA 4BA 2BA 2BA 2BA 2BA
0.2
5
0.2
5
0.2
5
0.2
5
1.282 1.282 1.282 1.282 1.282 1.282 1.282 1.282 3x0.5=1.5 3x0.5=1.5 3x0.5=1.5 3x0.5=1.5
0.1
25
0
.12
5
0.1
25
0
.12
5
3x0.5=1.5 3x0.5=1.5 3x0.5=1.5 3x0.5=1.5
8BA-8PL 8BA-8PL 8BA-8PL 8BA-8PL
0.0
63
0
.06
3
0.0
63
0
.06
3
MS
3.625 3.625 3.625 3.625
2
2
2
2
1.3
75
1
.37
5
1.3
75
1
.37
5
0.875 0.875 0.875 0.875
2.375 2.375 2.375 2.375
0.5
0
.5
0.5
0
.5
3.25 3.25 3.25 3.25
0.375 0.375 0.375 0.375
1.0
63
1
.06
3
1.0
63
1
.06
3
0.5 0.5 0.5 0.5
0.5
32
0
.53
2
0.5
32
0
.53
2
0.908 0.908 0.908 0.908
0.2
93
0
.29
3
0.2
93
0
.29
3
0.3
75
0
.37
5
0.3
75
0
.37
5
0.6
25
0
.62
5
0.6
25
0
.62
5
0.6
25
0
.62
5
0.6
25
0
.62
5
0.2
5
0.2
5
0.2
5
0.2
5
5.217 5.217 5.217 5.217
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.375 0.375 0.375 0.375
0.5 0.5 0.5 0.5 0.142-7PL 0.142-7PL 0.142-7PL 0.142-7PL
0.5
32
0
.53
2
0.5
32
0
.53
2
0.25 0.25 0.25 0.25
6BA-6PL 6BA-6PL 6BA-6PL 6BA-6PL
0.2
5
0.2
5
0.2
5
0.2
5
0.1
25
0
.12
5
0.1
25
0
.12
5 0
.25
0
.25
0
.25
0
.25
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.277 1.277 1.277 1.277 1.287 1.287 1.287 1.287 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
8BA-8PL 8BA-8PL 8BA-8PL 8BA-8PL
CALLED "TOBY".
JDWDSJDWDSJDWDSJDWDSPARTS AND ASSEMBLIESMAY-2016
SHEET: 03 OF 14 No: TOBY-03
DATEJDW DRAUGHTING SERVICES
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
J.A.M. DE WAAL PAPAKURA NZ
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3
PROJECTIONPROJECT No 07B-10-00
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
MODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
CSK
SCALE 1:2
0.142-2PL 0.142-2PL 0.142-2PL 0.142-2PL
0.625 0.625 0.625 0.625 0.625 0.625 0.625 0.625
1.188 1.188 1.188 1.188 1.188 1.188 1.188 1.188 1.844 1.844 1.844 1.844 1.844 1.844 1.844 1.844
0.219 0.219 0.219 0.219 0.219 0.219 0.219 0.219
1.1
25
1
.12
5
1.1
25
1
.12
5
0.8
75
0
.87
5
0.8
75
0
.87
5
0.6
25
0
.62
5
0.6
25
0
.62
5
6BA-2PL 6BA-2PL 6BA-2PL 6BA-2PL
0.1
25
0
.12
5
0.1
25
0
.12
5
0.185 0.185 0.185 0.185
SCALE 1:2
0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.2
5
0.2
5
0.2
5
0.2
5
0.5
0
.5
0.5
0
.5
0.25 0.25 0.25 0.25 0.313 0.313 0.313 0.313
SCALE 1:1.5
3.936 3.936 3.936 3.936
0.125 0.125 0.125 0.125
0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532
8BA-4PL 8BA-4PL 8BA-4PL 8BA-4PL
3.625 3.625 3.625 3.625
MS
1-18A
1-01
1-02
1-03
1-04
1-05
1-06
1-07
1-08
1-09
1-10
1-11A
1-12
1-13
1-14
1-15 1-16
1-171-19
MS
MS
UNDER ONLY
2 2 2 2
0.8
18
0.8
18
0.8
18
0.8
18
0.8
18
0.8
18
0.8
18
0.8
18
2BA 2BA 2BA 2BA 0.75 0.75 0.75 0.75
4.193 4.193 4.193 4.193
6BA 6BA 6BA 6BA
TAKE OVER FROM 1-01
SCALE 1:2
0.2
5
0.2
5
0.2
5
0.2
5
0.938 0.938 0.938 0.938 0.938 0.938 0.938 0.938
1.1
25
1
.12
5
1.1
25
1
.12
5
0.0
86
-10
PL
0
.08
6-
10P
L
0.0
86
-10
PL
0
.08
6-
10P
L
0.8
75
0
.87
5
0.8
75
0
.87
5
3.032 3.032 3.032 3.032 3.032 3.032 3.032 3.032
0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
2BA 2BA 2BA 2BA
MIRROR IMAGE OF PART 1-11A
1-11B
SEAL
0.2
5P
F
0.2
5P
F
0.2
5P
F
0.2
5P
F
0.125 0.125 0.125 0.125
0.25 0.25 0.25 0.25
0.1
88
RM
0
.18
8R
M
0.1
88
RM
0
.18
8R
M
0.094 0.094 0.094 0.094
0.033 0.033 0.033 0.033
0.094 0.094 0.094 0.094
BRSSCALE 1.5:1
0.1
56
TH
0
.15
6T
H
0.1
56
TH
0
.15
6T
H
0.094 0.094 0.094 0.094
0.063 0.063 0.063 0.063
0.2
19H
EX
0
.219
HE
X
0.2
19H
EX
0
.219
HE
X
BRS
SYN
BRZ
BRSSCALE 1.5:1
0.1
56
TH
0
.15
6T
H
0.1
56
TH
0
.15
6T
H
0.156TH 0.156TH 0.156TH 0.156TH
0.1
88
0
.18
8
0.1
88
0
.18
8
0.094 0.094 0.094 0.094
0.2
5
0.2
5
0.2
5
0.2
5
0
.06
3
0.0
63
0
.06
3
0.0
63
0.1 0.1 0.1 0.1
0.3
75
0
.37
5
0.3
75
0
.37
5
0.188 0.188 0.188 0.188
0.1
56
0
.15
6
0.1
56
0
.15
6
0.781 0.781 0.781 0.781
0.6
25
0
.62
5
0.6
25
0
.62
5
0.188 0.188 0.188 0.188
SECTION G-G
0.078 0.078 0.078 0.078
0.156 0.156 0.156 0.156
0.156TH 0.156TH 0.156TH 0.156TH
0.156 0.156 0.156 0.156
0.156TH 0.156TH 0.156TH 0.156TH
0.078 0.078 0.078 0.078
0
.15
6
0.1
56
0
.15
6
0.1
56
SCALE 1:1.5
0.0
94
0
.09
4
0.0
94
0
.09
4
8BA 8BA 8BA 8BA 0.11 0.11 0.11 0.11
2.781 2.781 2.781 2.781 0.125 0.125 0.125 0.125 0.094 0.094 0.094 0.094
0
.18
8
0.1
88
0
.18
8
0.1
88
0.188 0.188 0.188 0.188
0.1
88
RM
0
.18
8R
M
0.1
88
RM
0
.18
8R
M
0.3
75
TH
0
.37
5T
H
0.3
75
TH
0
.37
5T
H
0.063 0.063 0.063 0.063 0.4
38
HE
X
0.4
38
HE
X
0.4
38
HE
X
0.4
38
HE
X
0.3
44
0
.34
4
0.3
44
0
.34
4
6BA 6BA 6BA 6BA
R0.282
R0.282
R0.282
R0.282
0.25 0.25 0.25 0.25
0.3
75
TH
0
.37
5T
H
0.3
75
TH
0
.37
5T
H
MS
0.11 0.11 0.11 0.11
0.094 0.094 0.094 0.094
0.4
38
0
.43
8
0.4
38
0
.43
8
1.249 1.249 1.249 1.249
0.188 0.188 0.188 0.188 0.5 0.5 0.5 0.5 0.313 0.313 0.313 0.313
0.188 0.188 0.188 0.188
0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479
0.3
44
0
.34
4
0.3
44
0
.34
4
0.3
44
0
.34
4
0.3
44
0
.34
4
0.1
88
0
.18
8
0.1
88
0
.18
8
0.086-8PL 0.086-8PL 0.086-8PL 0.086-8PL
0.1
88
0
.18
8
0.1
88
0
.18
8
0.4
38
0
.43
8
0.4
38
0
.43
8
0.2
81
0.2
81
0.2
81
0.2
81
0.4
38
0
.43
8
0.4
38
0
.43
8
0.375 0.375 0.375 0.375
0.188TH 0.188TH 0.188TH 0.188TH
0.25TH 0.25TH 0.25TH 0.25TH
0.094 0.094 0.094 0.094
0.4
38
0
.43
8
0.4
38
0
.43
8
HH
MS0.086 0.086 0.086 0.086
0.094 0.094 0.094 0.094
0.0
94
0
.09
4
0.0
94
0
.09
4 0
.18
8
0.1
88
0
.18
8
0.1
88
45° 45° 45° 45°
1.12
5
1.12
5
1.12
5
1.12
5
0.086 0.086 0.086 0.086
0.1
88
0
.18
8
0.1
88
0
.18
8
BRS
SECTION H-H
SOLDERPLUG
SEAL
0.3
44
0
.34
4
0.3
44
0
.34
4
0.1
25
RM
0
.12
5R
M
0.1
25
RM
0
.12
5R
M
0.2
82
0
.28
2
0.2
82
0
.28
2
0.4
06
0
.40
6
0.4
06
0
.40
6
0.2
81T
H
0.2
81T
H
0.2
81T
H
0.2
81T
H
0.313 0.313 0.313 0.313
0.125 0.125 0.125 0.125
0
.12
5R
M
0.1
25
RM
0
.12
5R
M
0.1
25
RM
0.3
44
0
.34
4
0.3
44
0
.34
4
S S S S 0.125 0.125 0.125 0.125 S/S
BRZ
0.094 0.094 0.094 0.094
0.033 0.033 0.033 0.033
MS
0.375RM 0.375RM 0.375RM 0.375RM
0.3
75
0
.37
5
0.3
75
0
.37
5
0.3
75
0
.37
5
0.3
75
0
.37
5
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
5BA 5BA 5BA 5BA
DETAIL ESCALE 1.5 : 1
0.094 0.094 0.094 0.094
0.0
63
0
.06
3
0.0
63
0
.06
3
0.25 0.25 0.25 0.25
0.094 0.094 0.094 0.094
00 00.. .. 22 22
11 11 99 99
0000....000099994444
0000....000099994444
0.0
63
0
.06
3
0.0
63
0
.06
3
00 00.. .. 22 22
11 11 99 99
0.188 0.188 0.188 0.188
BRS
BRZ
0.2
5
0.2
5
0.2
5
0.2
5
2B
A
2B
A
2B
A
2B
A
0.375 0.375 0.375 0.375 0.75 0.75 0.75 0.75
0.625 0.625 0.625 0.625 0.2
5
0.2
5
0.2
5
0.2
5
=0
.25
=
=0
.25
=
=0
.25
=
=0
.25
=
R0.25 R0.25 R0.25 R0.25
0.2
5
0.2
5
0.2
5
0.2
5
0.188 0.188 0.188 0.188
0.2
5
0.2
5
0.2
5
0.2
5
0.562 0.562 0.562 0.562
SECTION D-D
0.75RM 0.75RM 0.75RM 0.75RM
0.1
88
0
.18
8
0.1
88
0
.18
8
0.25TH 0.25TH 0.25TH 0.25TH
0.2
5
0.2
5
0.2
5
0.2
5
0.188 0.188 0.188 0.188
CSK UNDER
0.1
57
0
.15
7
0.1
57
0
.15
7
0.532 0.532 0.532 0.532 0.532 0.532 0.532 0.532
0.126 0.126 0.126 0.126 0.086 0.086 0.086 0.086 0.086 0.086 0.086 0.086
0.3
13
0.3
13
0.3
13
0.3
13
0.3
13
0.3
13
0.3
13
0.3
13
0.3
63
0
.36
3
0.3
63
0
.36
3
0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
0.063 0.063 0.063 0.063
0.1
88
0
.18
8
0.1
88
0
.18
8
SECTION C-C
00 00.. .. 55 55
99 9944 44
00 00
.. .. 55 5599 99
44 44
0.0
63
0
.06
3
0.0
63
0
.06
3
0.094 0.094 0.094 0.094
0.0
63
0
.06
3
0.0
63
0
.06
3
0000....000099994444
0000....555533332222 0.188 0.188 0.188 0.188
=0
.25
=
=0
.25
=
=0
.25
=
=0
.25
=
0.063 0.063 0.063 0.063
SCALE 1:1.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.813 0.813 0.813 0.813 0.813 0.813 0.813 0.813
0.5TH 0.5TH 0.5TH 0.5TH
0.5
0
.5
0.5
0
.5
0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
0.2
66
0
.26
6
0.2
66
0
.26
6
0.25 0.25 0.25 0.25
1.5
1
.5
1.5
1
.5
0.25 0.25 0.25 0.25
0.8
13
0.8
13
0.8
13
0.8
13
0.2
19
0.2
19
0.2
19
0.2
19
0.8
13
0.8
13
0.8
13
0.8
13
0.2
19
0.2
19
0.2
19
0.2
19
0.313 0.313 0.313 0.313
MS
OPPOSITE FACE EQUAL
0.8
13
0.8
13
0.8
13
0.8
13 0
.40
7
0.4
07
0
.40
7
0.4
07
R0.563
R0.563
R0.563
R0.563
0.438 0.438 0.438 0.438
0.125 0.125 0.125 0.125
0.25 0.25 0.25 0.25
0.969 0.969 0.969 0.969
0.5
32
0
.53
2
0.5
32
0
.53
2
0.5
32
0
.53
2
0.5
32
0
.53
2
0.8
13
0.8
13
0.8
13
0.8
13
8BA 8BA 8BA 8BA
0.094 0.094 0.094 0.094
0.2
19
0.2
19
0.2
19
0.2
19
G
G
CC
HIDDEN LINES REMOVED FOR CLARITY
0.11-4PL 0.11-4PL 0.11-4PL 0.11-4PL
0.479 0.479 0.479 0.479
R0.17
R0.17
R0.17
R0.17
0.479 0.479 0.479 0.479
8B
A 8
BA
8B
A 8
BA
0.2
5-
8P
L
0.2
5-
8P
L
0.2
5-
8P
L
0.2
5-
8P
L
AA
D
D
BRS
1.125 1.125 1.125 1.125
0.086 0.086 0.086 0.086
0.18
8
0.18
8
0.18
8
0.18
8
MS
SECTION A-A
0000....111155556666 0.156 0.156 0.156 0.156
0.078-2PL 0.078-2PL 0.078-2PL 0.078-2PL
0.1
0
.1
0.1
0
.1
0.4
53
0
.45
3
0.4
53
0
.45
3
0.25 0.25 0.25 0.25
1
1
1
1
0.5 0.5 0.5 0.5
0.6
25
0
.62
5
0.6
25
0
.62
5
0.6
25
0
.62
5
0.6
25
0
.62
5
4B
A-
6P
L
4B
A-
6P
L
4B
A-
6P
L
4B
A-
6P
L
1.1
19
1.1
19
1.1
19
1.1
19
0
.37
5
0.3
75
0
.37
5
0.3
75
0
.37
5
0.3
75
0
.37
5
0.3
75
0
.15
0
.15
0
.15
0
.15
0.025 0.025 0.025 0.025
SCALE 1.5:1
0.25 0.25 0.25 0.25
0.1
25
RM
0
.12
5R
M
0.1
25
RM
0
.12
5R
M
0.2
81T
H
0.2
81T
H
0.2
81T
H
0.2
81T
H
0.063 0.063 0.063 0.063
0.3
23
HE
X
0.3
23
HE
X
0.3
23
HE
X
0.3
23
HE
X
SCALE 1.5:1
0.313HEX 0.313HEX 0.313HEX 0.313HEX
0.188TH 0.188TH 0.188TH 0.188TH
0.1
88
0
.18
8
0.1
88
0
.18
8
0.5
0
.5
0.5
0
.5
0.25TH 0.25TH 0.25TH 0.25TH
0.1
88
0
.18
8
0.1
88
0
.18
8
0.3
75
0
.37
5
0.3
75
0
.37
5
0.063 0.063 0.063 0.063 0
.42
2
0.4
22
0
.42
2
0.4
22
0
.06
3P
F
0.0
63
PF
0
.06
3P
F
0.0
63
PF
CALLED "TOBY".
JDWDSJDWDSJDWDSJDWDSPARTS AND ASSEMBLIESMAY-2016
SHEET: 04 OF 14 No: TOBY-04
DATEJDW DRAUGHTING SERVICES
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
J.A.M. DE WAAL PAPAKURA NZ
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3
PROJECTIONPROJECT No 07B-10-00
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
MODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
BRZ
1-30
1-20
1-21
1-22
1-23
1-24
1-25
1-261-27
1-28
1-29
1-33
1-31
1-31
1-32
1-34
BRS
S/S
SEAL
SCALE 1.5:1
0.1
25
0
.12
5
0.1
25
0
.12
5
0.188 0.188 0.188 0.188
0.3
13H
EX
0
.313
HE
X
0.3
13H
EX
0
.313
HE
X
0.063 0.063 0.063 0.063
0.2
5T
H
0.2
5T
H
0.2
5T
H
0.2
5T
H
0.01 0.01 0.01 0.01
S S S S 0.156 0.156 0.156 0.156
BRSSYN
S/S
PLUGBRS
0.188TH 0.188TH 0.188TH 0.188TH
0.2
82
0
.28
2
0.2
82
0
.28
2
0.188TH 0.188TH 0.188TH 0.188TH
0.2
82
0
.28
2
0.2
82
0
.28
2
0
.5
0.5
0
.5
0.5
SCALE 1:1.5
0.313 0.313 0.313 0.313
1.36
8
1.36
8
1.36
8
1.36
8
0.0
69
0
.06
9
0.0
69
0
.06
9
0.438 0.438 0.438 0.438
0.219 0.219 0.219 0.219
0.1
25
0
.12
5
0.1
25
0
.12
5
0. 2
5
0. 2
5
0. 2
5
0. 2
5
0.156 0.156 0.156 0.156
0.313TH 0.313TH 0.313TH 0.313TH
BRS
SEAL
0.1
88
0
.18
8
0.1
88
0
.18
8
0.1
57
0
.15
7
0.1
57
0
.15
7
0.125 0.125 0.125 0.125
0.313TH 0.313TH 0.313TH 0.313TH
0.2
5T
H
0.2
5T
H
0.2
5T
H
0.2
5T
H
0.1
25
0
.12
5
0.1
25
0
.12
5
0.2 0.2 0.2 0.2
0.3
13
0.3
13
0.3
13
0.3
13
0.5 0.5 0.5 0.5
PLUG
PLUG 0.625 0.625 0.625 0.625
1.3
13
1.3
13
1.3
13
1.3
13
0.2
19
0.2
19
0.2
19
0.2
19
0.4
38
0
.43
8
0.4
38
0
.43
8
0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
0.625 0.625 0.625 0.625
PLUG
PLUG
0.2
5
0.2
5
0.2
5
0.2
5
0.156 0.156 0.156 0.156
1.2
82
1
.28
2
1.2
82
1
.28
2
1.2
82
1
.28
2
1.2
82
1
.28
2
0.2
19
0.2
19
0.2
19
0.2
19
0.2
19
0.2
19
0.2
19
0.2
19
R0.14
R0.14
R0.14
R0.14
0
.25
0
.25
0
.25
0
.25
MS
MS
BRSSYN
SYN
BRSBRZ
PRESS FIT PIN
SCALE 1:1.5
BRS
0.063 0.063 0.063 0.063
0.3
75
0
.37
5
0.3
75
0
.37
5
0.313TH 0.313TH 0.313TH 0.313TH
0.6
25
0
.62
5
0.6
25
0
.62
5
0.3
13
0.3
13
0.3
13
0.3
13
0
.43
8
0.4
38
0
.43
8
0.4
38
0.5
TH
0
.5T
H
0.5
TH
0
.5T
H
0.5 0.5 0.5 0.5 0.875 0.875 0.875 0.875
0.5 0.5 0.5 0.5
0.3
75
0
.37
5
0.3
75
0
.37
5
1.3
75
1
.37
5
1.3
75
1
.37
5
0.313TH 0.313TH 0.313TH 0.313TH
0.5 0.5 0.5 0.5
0.125 0.125 0.125 0.125
0
.12
5
0.1
25
0
.12
5
0.1
25
0.313 0.313 0.313 0.313
0.813 0.813 0.813 0.813 0.813 0.813 0.813 0.813
0.2
5
0.2
5
0.2
5
0.2
5
0.1
25
0
.12
5
0.1
25
0
.12
5
0.313 0.313 0.313 0.313
SEAL
0.1
57
0
.15
7
0.1
57
0
.15
7
0.3
13
0.3
13
0.3
13
0.3
13
0.063 0.063 0.063 0.063
0.1
88
0
.18
8
0.1
88
0
.18
8
0.0
63
0
.06
3
0.0
63
0
.06
3
0.127 0.127 0.127 0.127
0.125 0.125 0.125 0.125
0.1
18
0.1
18
0.1
18
0.1
18
5° 5° 5° 5°
0.313TH 0.313TH 0.313TH 0.313TH
0.2
5
0. 2
5
0. 2
5
0. 2
5
0.313 0.313 0.313 0.313
0.156 0.156 0.156 0.156
0.313 0.313 0.313 0.313 0.1
56
0
.15
6
0.1
56
0
.15
6
0.2
49
TH
0
.24
9T
H
0.2
49
TH
0
.24
9T
H
0.249 0.249 0.249 0.249
0.219 0.219 0.219 0.219
0.1
25
0
.12
5
0.1
25
0
.12
5
0.156 0.156 0.156 0.156
0.9
72
0
.97
2
0.9
72
0
.97
2
SCALE 1:1.5
2BA 2BA 2BA 2BA
2BA 2BA 2BA 2BA
0.2
5
0.2
5
0.2
5
0.2
5
1
1
1
1
0.3
13
0.3
13
0.3
13
0.3
13
0.1
25
0
.12
5
0.1
25
0
.12
5
0.375 0.375 0.375 0.375
PLUG
BRS
SCALE 1.5:1
0.3
13
0.3
13
0.3
13
0.3
13
0.1
41
0.1
41
0.1
41
0.1
41
0.141 0.141 0.141 0.141
0.25TH 0.25TH 0.25TH 0.25TH
0.2
19
0.2
19
0.2
19
0.2
19
0.2
19
0.2
19
0.2
19
0.2
19
0.328HEX 0.328HEX 0.328HEX 0.328HEX
0.0
94
0
.09
4
0.0
94
0
.09
4
0.203 0.203 0.203 0.203
S S S S 0.188 0.188 0.188 0.188
MS
SA-1-1011-01
1-07
1-07
1-06
SA-104
1-06
SA-106
1-21
1-22
SA-1-108
1-23
22 COILS
0.5 0.5 0.5 0.5
0.375 0.375 0.375 0.375
0.1
0
.1
0.1
0
.1
R0.13
8
R0.13
8
R0.13
8
R0.13
8
0.1
0
.1
0.1
0
.1
0.2
03
0
.20
3
0.2
03
0
.20
3
0.188 0.188 0.188 0.188
0.7
5
0.7
5
0.7
5
0.7
5
0.156 THICK
0.188 0.188 0.188 0.188
1 1 1 1
0.188 0.188 0.188 0.188 0.188 0.188 0.188 0.188
1-28
1-29
SA-1-110
1-29
1-12
SA-1-103
1-10
1-09
1-11A
1-13
SA-105
1-14
SA-105
SA-1-120
1-32
1-05
SA-1-111
1-30
1-29
SA-1-110
1-29
SA-1-101
SA-1-102
SA-1-109
1-02
1-08
1-08
1-34
1-03
1-04
1-311-31
1-32
SA-1-111
1-31
SA-1-104
1-141-12
1-11B
1-09
SA-1-105
1-10
SA-1-105
1-13
1-24
SA-1-109
1-25
1-27
1-27
1-26
1-18A
1-20
SA-1-106
1-19
SA-1-108
MS
SPS
6BA 6BA 6BA 6BA
0.1
25
0
.12
5
0.1
25
0
.12
5
1.2
5
1.2
5
1.2
5
1.2
5
6BA 6BA 6BA 6BA
0.1
25
0
.12
5
0.1
25
0
.12
5
0.125 0.125 0.125 0.125
SA-1-102 1-07
SA-1-103
1-01
1-06
1-06
SA-1-107
1-07
1-18B
1-20
SA-1-107
1-19
SA-1-108
1615
17
SA-1-105
0.875PCD 0.875PCD 0.875PCD 0.875PCD
3°
3°
3°
3°
1.5
1.5
1.5
1.5
R3.501
R3.501
R3.501
R3.501
0.875 0.875 0.875 0.875
0.375 0.375 0.375 0.375
0.875 0.875 0.875 0.875
0.75RM
0.75RM
0.75RM
0.75RM
0.875
0.875
0.875
0.875
0.766 0.766 0.766 0.766
0.406 0.406 0.406 0.406
0.562
0.562
0.562
0.562
1.688 1.688 1.688 1.688 0.344 0.344 0.344 0.344
3°
3°
3°
3°
2.062
2.062
2.062
2.062
0.75RM
0.75RM
0.75RM
0.75RM
0.875
0.875
0.875
0.875
SCALE 1:1.5
MS
1.125 1.125 1.125 1.125
0.313PF
0.313PF
0.313PF
0.313PF
0.625 0.625 0.625 0.625
1.75 1.75 1.75 1.75
0.203 0.203 0.203 0.203
B
B
0.011
0.011
0.011
0.011
2.334 2.334 2.334 2.334
0.313PF
0.313PF
0.313PF
0.313PF
00 00.. .. 33 3311 11 33 33PP PPFF FF 0000....333377775555 0.375 0.375 0.375 0.375
0.375CF 0.375CF 0.375CF 0.375CF
2-102-09
SA-2-2032-11
2-01
2-04
SA-2-201
2-04
2-02
2-022-06
WHEELS ARE 90DEG OFF-SET
2-16 2-17
SA-2-207
2-15
2-18
2-14
2-12
SA-2-2062-13
2-16 2-17
SA-2-208
2-15
2-18
2-192-21 2-20
SA-2-209
2.756MAX 2.756MAX 2.756MAX 2.756MAX
2-10
2-11SA-2-204
2-09
SECTION B-BSCALE 1 : 1.5
0.064 0.064 0.064 0.064
0.375 0.375 0.375 0.375
0.078 0.078 0.078 0.078
2-142-12
SA-2-2052-13
2-25
2-25
SA-2-202
2-05
2-03
2-03
2-05
2-01
2-24
2-24
WHEELS ARE 90DEG OFF-SET
ADJUST ECCENTRICS UNTIL ENGINES ARE RUNNING SMOOTHLY AND TO THE SATISFACTION OF THE BUILDER
= = = = = = = =
BRZ
SYN
DAA
0.125
0.125
0.125
0.125 0.094
0.094
0.094
0.094
0.047 0.047 0.047 0.047
0.25RM 0.25RM 0.25RM 0.25RM
0.375 0.375 0.375 0.375
0.313PF 0.313PF 0.313PF 0.313PF
0.047
0.047
0.047
0.047
SCALE 1.5:1
0.25PF
0.25PF
0.25PF
0.25PF
0.188RM
0.188RM
0.188RM
0.188RM
0.188 0.188 0.188 0.188
MS
DAA
0.094
0.094
0.094
0.094 0.047 0.047 0.047 0.047 0.188 0.188 0.188 0.188
DAA
SCALE 1.5:1
0.031
0.031
0.031
0.031
0.104
0.104
0.104
0.104
0.25RM 0.25RM 0.25RM 0.25RM
0.375 0.375 0.375 0.375
0.313PF 0.313PF 0.313PF 0.313PF
0.094
0.094
0.094
0.094
0.047 0.047 0.047 0.047
BRZ1.5:1SCALE
BRZ
DAA
0.25RM 0.25RM 0.25RM 0.25RM
0.313PF 0.313PF 0.313PF 0.313PF
0.047 0.047 0.047 0.047
0.03
0.03
0.03
0.03
0.135
0.135
0.135
0.135
BRZ
DAA
0.064
0.064
0.064
0.064
0.094
0.094
0.094
0.094
0.188
0.188
0.188
0.188
0.047 0.047 0.047 0.047 0.047 0.047 0.047 0.047
(5.625) (5.625) (5.625) (5.625)
BRZ
0.313
0.313
0.313
0.313
0.313 0.313 0.313 0.313 0.493 0.493 0.493 0.493 4.75 4.75 4.75 4.75
0.25 0.25 0.25 0.25
0.313
0.313
0.313
0.313 0.25PF 0.25PF 0.25PF 0.25PF
R0.188
R0.188
R0.188
R0.188 0.313PF 0.313PF 0.313PF 0.313PF
R0.188
R0
.188
R0.188
R0
.188
0.313 0.313 0.313 0.313 0.493 0.493 0.493 0.493
0.313PF 0.313PF 0.313PF 0.313PF 0.313PF 0.313PF 0.313PF 0.313PF
0.39CF
0.39CF
0.39CF
0.39CF
5 5 5 5
0.313
0.313
0.313
0.313 0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.313 0.313
0.313
0.313
0.313 R0.18
R0.18
R0.18
R0.18 R0.18
R0.18
R0.18
R0.18
0.493 0.493 0.493 0.493
R0.188 R0.188 R0.188 R0.188
0.313 0.313 0.313 0.313
MS
MS
MS
BRS
2BA R0.157 R0.157 R0.157 R0.157
2BA
2BA
2BA
2BA
0.218 0.218 0.218 0.218
4.225 4.225 4.225 4.225
0.672 0.672 0.672 0.672
4.693 4.693 4.693 4.693
0.641 0.641 0.641 0.641 0.094 0.094 0.094 0.094 0.188 0.188 0.188 0.188
0.875 0.875 0.875 0.875
0.375
0.375
0.375
0.375
0.391 0.391 0.391 0.391
MS
0.375
0.375
0.375
0.375
0.375 0.375 0.375 0.375
0.75 0.75 0.75 0.75
0.5PF
0.5PF
0.5PF
0.5PF
0.125 0.125 0.125 0.125
0.188 0.188 0.188 0.188
0.375 0.375 0.375 0.375
MS
R1
R1
0.125 THICK SCALE 1:1.5
0.625
0.625
0.625
0.625 0.188 0.188 0.188 0.188
0.11 0.11 0.11 0.11
0.75 0.75 0.75 0.75
0.437
0.437
0.437
0.437 0.437
0.437
0.437
0.437 0.377
0.377
0.377
0.377
0.377
0.377
0.377
0.377
1.063
1.063
1.063
1.063
0.625
0.625
0.625
0.625
1.063
1.063
1.063
1.063
0.625
0.625
0.625
0.625
1.25 1.25 1.25 1.25 1.5 1.5 1.5 1.5 0.875 0.875 0.875 0.875
R0.25 R0.25 R0.25 R0.25
0.625
0.625
0.625
0.625
0.125 0.125 0.125 0.125
0.094
0.094
0.094
0.094
5BA 5BA 5BA 5BA
BRZ
BRSMS
0.05 0.05 0.05 0.05
0.375RM
0.375RM
0.375RM
0.375RM
0.5PF
0.5PF
0.5PF
0.5PF
0.25 0.25 0.25 0.25
0.625
0.625
0.625
0.625
=0.125=
=0.125=
=0.125=
=0.125=
0.313
0.313
0.313
0.313
BRS
PF
=0.25= =0.25= =0.25= =0.25=
0.375 0.375 0.375 0.375
0.125 0.125 0.125 0.125
0.75
0.75
0.75
0.75
0.313 0.313 0.313 0.313
0.125
0.125
0.125
0.125
SCALE 1:2 1.063 1.063 1.063 1.063
6BA 6BA 6BA 6BA 6BA 6BA 6BA 6BA
0.375
0.375
0.375
0.375
0.75
0.75
0.75
0.75
0.625 0.625 0.625 0.625 0.625 0.625 0.625 0.625
6BA 6BA 6BA 6BA
1.063 1.063 1.063 1.063
2-26
SA-2-211
2-27
2-28
2-28
2-31
2-30SA-2-212
2-31
5.1 5.1 5.1 5.1
2.585MAX 2.585MAX 2.585MAX 2.585MAX
2-23
2-22
SA-2-210
0.125
0.125
0.125
0.125
0.625 0.625 0.625 0.625
0.25
0.25
0.25
0.25
0.313 0.313 0.313 0.313 0.094 0.094 0.094 0.094
BRS
0.313 0.313 0.313 0.313 0.219
0.219
0.219
0.219
0.438
0.438
0.438
0.438
0.313 0.313 0.313 0.313
0.125 0.125 0.125 0.125 BRZ
BRZ
0.25
0.25
0.25
0.25
=0.125=
=0.125=
=0.125=
=0.125= 0.313 0.313 0.313 0.313
0.125
0.125
0.125
0.125
4BA 4BA 4BA 4BA
0.25
0.25
0.25
0.25
0.375 0.375 0.375 0.375 R0.125
R0.125
R0.125
R0.125
2.688 2.688 2.688 2.688
0.125CF 0.125CF 0.125CF 0.125CF
6BA
6BA
6BA
6BA
6BA
6BA
6BA
6BA
2BA
2BA
2BA
2BA
0.219
0.219
0.219
0.219
0.188CF 0.188CF 0.188CF 0.188CF
2BA
2BA
2BA
2BA
0.375 0.375 0.375 0.375
2.412 2.412 2.412 2.412 0.25 0.25 0.25 0.25
0.063PF 0.063PF 0.063PF 0.063PF
0.315
0.315
0.315
0.315
0.282 0.282 0.282 0.282
5BA
5BA
5BA
5BA
0.094 0.094 0.094 0.094
0.188CF
0.188CF
0.188CF
0.188CF
0.281
0.281
0.281
0.281
0.094 0.094 0.094 0.094
0.063 0.063 0.063 0.063
0.125
0.125
0.125
0.125
SEAL
2BA
2BA
2BA
2BA
0.75CF
0.75CF
0.75CF
0.75CF
0.761
0.761
0.761
0.761
0.5
0.5
0.5
0.5
0.125 0.125 0.125 0.125
0.125 0.125 0.125 0.125
0.375 0.375 0.375 0.375
0.438 0.438 0.438 0.438 0.148 0.148 0.148 0.148 0.148 0.148 0.148 0.148
0.094
0.094
0.094
0.094
0.438
0.438
0.438
0.438
0.094
0.094
0.094
0.094
0.558
0.558
0.558
0.558
0.558
0.558
0.558
0.558
0.188 0.188 0.188 0.188 0.188 0.188 0.188 0.188 0.156 0.156 0.156 0.156
0.163
0.163
0.163
0.163
0.203
0.203
0.203
0.203
0.203
0.203
0.203
0.203
0.625 0.625 0.625 0.625
S/S
0.313
0.313
0.313
0.313
0.25 0.25 0.25 0.25
R0.281 R0.281 R0.281 R0.281
0.594 0.594 0.594 0.594
0.281 0.281 0.281 0.281
0.281
0.281
0.281
0.281
0.594
0.594
0.594
0.594
0.063PF 0.063PF 0.063PF 0.063PF
0.188
0.188
0.188
0.188
0.625 0.625 0.625 0.625
0.469 0.469 0.469 0.469
BRZ
S/S
BRS
MS
0.242 0.242 0.242 0.242 0.25 0.25 0.25 0.25
0.438
0.438
0.438
0.438
0.125 0.125 0.125 0.125
0.477
0.477
0.477
0.477
0.477
0.477
0.477
0.477
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.25 0.25 0.25 0.25
0.188
0.188
0.188
0.188
=0.188= =0.188= =0.188= =0.188=
=0.188CF= =0.188CF= =0.188CF= =0.188CF=
0.188CF
0.188CF
0.188CF
0.188CF
0.188 0.188 0.188 0.188
0.344
0.344
0.344
0.344
0.188 0.188 0.188 0.188
5BA
5BA
5BA
5BA
MS
2.25 2.25 2.25 2.25
2BA 2BA 2BA 2BA
A
A
MS
0.188 0.188 0.188 0.188
0.188PF
0.188PF
0.188PF
0.188PF
0.25CF 0.25CF 0.25CF 0.25CF
0.375 0.375 0.375 0.375 0.52 0.52 0.52 0.52
4BA
4BA
4BA
4BA
IN LEADING AXLE ONLY
1.167 1.167 1.167 1.167
0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.313PF
0.313PF
0.313PF
0.313PF
0.313PF
0.313PF
0.313PF
0.313PF
0.375CF 0.375CF 0.375CF 0.375CF 0.126 0.126 0.126 0.126
1.167 1.167 1.167 1.167 0.125 0.125 0.125 0.125
0.25 0.25 0.25 0.25
0.477
0.477
0.477
0.477
0.477
0.477
0.477
0.477
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
2-26
2-27
2-22
2-30
2-01
2-02
2-03
2-04
2-05
2-06
2-07
2-08
2-09
2-10
2-11
2-12
2-13 2-14
2-15
2-16
2-17
2-18
2-19
2-20
2-21
2-28
2-23
2-24
2-25
2-31
0.141 0.141 0.141 0.141
0.375
0.375
0.375
0.375
0.875
0.875
0.875
0.875
SYNS/S
PROJECT No 07B-10-00
J.A.M. DE WAAL PAPAKURA NZNEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000 CALLED "TOBY".
JDWDSJDWDSJDWDSJDWDSPARTS AND ASSEMBLIESMAY-2016
SHEET: 05 OF 14
PROJECTION
A3 No: TOBY-05
DATEJDW DRAUGHTING SERVICES
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
MODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
SEAL 0.063 0.063 0.063 0.063 0.125RM 0.125RM 0.125RM 0.125RM 0.313CF 0.313CF 0.313CF 0.313CF
0.188
0.188
0.188
0.188
0.315
0.315
0.315
0.315 R0.157 R0.157 R0.157 R0.157
0.063 0.063 0.063 0.063
SECTION A-ASCALE 1 : 1.5
0.078 0.078 0.078 0.078
0.064 0.064 0.064 0.064
1.75
1.75
1.75
1.75
0.343 0.343 0.343 0.343
0.375 0.375 0.375 0.375
0.313PF
0.313PF
0.313PF
0.313PF
SOLDER
6BA
6BA
0.163
0.163
0.163
0.163
0.188 0.188 0.188 0.188
R0.157
R0.157
R0.157
R0.157
1.43 1.43 1.43 1.43
0.188 0.188 0.188 0.188
0.313
0.313
0.313
0.313
0.203 0.203 0.203 0.203
0.946 0.946 0.946 0.946 0.558
0.558
0.558
0.558
0.558
0.558
0.558
0.558
0.203 0.203 0.203 0.203
0.156 0.156 0.156 0.156
0.625 0.625 0.625 0.625
0.063 0.063 0.063 0.063
5BA 5BA 5BA 5BA
0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125
0.063 0.063 0.063 0.063
0.75CF
0.75CF
0.75CF
0.75CF
2BA
2BA
2BA
2BA
0.135 0.135 0.135 0.135
0.063 0.063 0.063 0.063 0.313 0.313 0.313 0.313
0.25CF
0.25CF
0.25CF
0.25CF
MS
FOR ALL OTHER DIMENSION DETAILS REFER TO 2-02
0.188PF 0.188PF 0.188PF 0.188PF
MS
BRS
0.125PF 0.125PF 0.125PF 0.125PF
0.266 0.266 0.266 0.266 =0.125=
=0.125=
=0.125=
=0.125=
=0.328=
=0.328=
=0.328=
=0.328= 0.063 0.063 0.063 0.063
0.125
0.125
0.125
0.125
BRS
0.1250.1250.1250.125 0.22 0.22 0.22 0.22
2.875PCD 2.875PCD 2.875PCD 2.875PCD
0.25 0.25 0.25 0.25 2
2
2 2
0.062 0.062 0.062 0.062 2.875PCD
2.875PCD
2.875PCD
2.875PCD
45° 45° 45° 45°
0.216
0.216
0.216
0.216 0.643
0.643
0.643
0.643
0.21
0.21
0.21
0.21
0.248
0.248
0.248
0.248
0.125 0.125 0.125 0.125
SR0
.093
SR0
.093
SR0
.093
SR0
.093
0.621 0.621 0.621 0.621
0.75 0.75 0.75 0.75
0.061
0.061
0.061
0.061
0.125 0.125 0.125 0.125
SCALE 2:1
0.078 0.078 0.078 0.078
0.063 0.063 0.063 0.063
8BA 8BA 8BA 8BA
0.1
0.1
0.1
0.1
SR0.07
SR0.07
SR0.07
SR0.07
0.156
0.156
0.156
0.156
0.047
0.047
0.047
0.047
0.125
0.125
0.125
0.125
0.086 0.086 0.086 0.086
0.5
0.5
0.5
0.5 0.125
0.125
0.125
0.125
0.156 0.156 0.156 0.156
0.078
0.078
0.078
0.078
8888
BRS
BRS
MS/ALU/BRS
0.125
0.125
0.125
0.125
0.313 0.313 0.313 0.313
0.25TH
0.25TH
0.25TH
0.25TH
0.375HEX
0.375HEX
0.375HEX
0.375HEX
0.156 0.156 0.156 0.156
0.438 0.438 0.438 0.438
SCALE 1:2
0.188
0.188
0.188
0.188
0.219
0.219
0.219
0.219
1.125 1.125 1.125 1.125
0.188
0.188
0.188
0.188
1.062
1.062
1.062
1.062 0.219
0.219
0.219
0.219
1.25 1.25 1.25 1.25
0.375 0.375 0.375 0.375
0.142 0.142 0.142 0.142
0.469
0.469
0.469
0.469
SCALE 1:1.5
BRS
1
1
1
1
0.313 0.313 0.313 0.313
0.281 0.281 0.281 0.281 0.25
0.25
0.25
0.25 0.063
0.063
0.063
0.063
1.063
1.063
1.063
1.063
0.063
0.063
0.063
0.063
0.531 0.531 0.531 0.531
BRS
BRS
R1.443 0.25
0.25
0.25
0.25
0.25 0.25 0.25 0.25
0.125
0.125
0.125
0.125 2
0°
20°
20°
20°
1.021 1.021 1.021 1.021
0.25 0.25 0.25 0.25
0.313HEX
0.313HEX
0.313HEX
0.313HEX
0.25TH
0.25TH
0.25TH
0.25TH 0.125 0.125 0.125 0.125
0.125 0.125 0.125 0.125
30°
30°
30°
30°
SCALE 1:1.5
1.25 1.25 1.25 1.25
0.375TH 0.375TH 0.375TH 0.375TH
1.125 1.125 1.125 1.125
0.25TH 0.25TH 0.25TH 0.25TH
0.25
0.25
0.25
0.25
0.438
0.438
0.438
0.438
0.063
0.063
0.063
0.063
0.125
0.125
0.125
0.125
BRSSCALE 1.5:1
0.108 0.108 0.108 0.108 0.142 0.142 0.142 0.142
0.125
0.125
0.125
0.125
0.188HEX
0.188HEX
0.188HEX
0.188HEX
30°
30°
30°
30°
0.028
0.028
0.028
0.028
0.156 0.156 0.156 0.156
BRS
0.125 0.125 0.125 0.125
MS0.125 THICK SCALE 1:2.5
7BA-4PL 7BA-4PL 7BA-4PL 7BA-4PL
(15.625) (15.625) (15.625) (15.625)
1.282
1.282
1.282
1.282
1.282
1.282
1.282
1.282
0.5
0.5
0.5
0.5 0.5
0.5
0.5
0.5 0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
3.032
3.032
3.032
3.032
3.032
3.032
3.032
3.032
1.657
1.657
1.657
1.657
1.657
1.657
1.657
1.657
1.75
1.75
1.75
1.75
0.5 0.5 0.5 0.5
1.75
1.75
1.75
1.75
R0.156
R0.156
R0.156
R0.156
0.566 0.566 0.566 0.566
0.75 0.75 0.75 0.75 1.75 1.75 1.75 1.75 1.063 1.063 1.063 1.063 2.5 2.5 2.5 2.5 0.5 0.5 0.5 0.5 2.5 2.5 2.5 2.5 0.875 0.875 0.875 0.875 0.5 0.5 0.5 0.5 3.125 3.125 3.125 3.125 0.5 0.5 0.5 0.5 1.188 1.188 1.188 1.188
0.375 0.375 0.375 0.375
0.375 0.375 0.375 0.375
0.5 0.5 0.5 0.5
1.282
1.282
1.282
1.282
0.5
0.5
0.5
0.5 0.5
0.5
0.5
0.5 0.5
0.5
0.5
0.5
1.282
1.282
1.282
1.282
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.813
0.813
0.813
0.813 0.813
0.813
0.813
0.813
1.188 1.188 1.188 1.188
2.157
2.157
2.157
2.157
2.157
2.157
2.157
2.157
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.875
1.875
1.875
1.875
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.875
1.875
1.875
1.875
1.457 1.457 1.457 1.457
R0.156
R0.156
R0.156
R0.156
0.125 0.125 0.125 0.125
4.328 4.328 4.328 4.328
0.375 0.375 0.375 0.375
0.125 0.125 0.125 0.125 0.375 0.375 0.375 0.375
0.25 0.25 0.25 0.25
0.734
0.734
0.734
0.734
0.187 0.187 0.187 0.187
0.086-27PL 0.086-27PL 0.086-27PL 0.086-27PL 0.142-2PL 0.142-2PL 0.142-2PL 0.142-2PL
(6.063)
(6.063)
(6.063)
(6.063)
SCALE 1:1.5SPACERSALL SOLDER
BRS
9BA
9BA
9BA
9BA
0.444
0.444
0.444
0.444
0.444
0.444
0.444
0.444
0.313
0.313
0.313
0.313
0.125 0.125 0.125 0.125
2.25 2.25 2.25 2.25
0.422 0.422 0.422 0.422 0.422 0.422 0.422 0.422
0.11 0.11 0.11 0.11
3-27
3-28
3-02
3-01
3-03
3-043-05
3-06 3-07
3-08
3-09
3-10
3-11
3-12
3-14
3-15
3-16
3-17
3-18
3-19
3-20
3-21
3-22
3-23
3-24
325
3-26
3-29
3.871
0.213 0.213 0.213 0.213
0.063 0.063 0.063 0.063
0.063 0.063 0.063 0.063
0.2 0.2 0.2 0.2
BRS
1O HOLES EQUALLY SPACED ON PCD(2HOLES OMMITTED)
SCALE 1:2
R1.625 R1.625 R1.625 R1.625
0.313
0.313
0.313
0.313
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.845
0.845
0.845
0.845
1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812
0.576
0.576
0.576
0.576
1.906 1.906 1.906 1.906
0.187
0.187
0.187
0.187
0.343
0.343
0.343
0.343
1.906 1.906 1.906 1.906
0.086-21PL 0.086-21PL 0.086-21PL 0.086-21PL
6BA 6BA 6BA 6BA
0.125 0.125 0.125 0.125
1.844
1.844
1.844
1.844
0.069 0.069 0.069 0.069
1.43 1.43 1.43 1.43 0.031
0.031
0.031
0.031
0000....000099994444 RRRR0000....1111
BRS
ANGLE 0.219x0.219x 0.031 SOLDER
1.75 1.75 1.75 1.75
0.094
0.094
0.094
0.094 1.75 1.75 1.75 1.75
0.063
0.063
0.063
0.063
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000 CALLED "TOBY".
JDWDSJDWDSJDWDSJDWDSPARTS AND ASSEMBLIESMAY-2016
SHEET: 06 OF 14 No: TOBY-06
DATEJ.A.M. DE WAAL PAPAKURA NZ
PROJECT No 07B-10-00
JDW DRAUGHTING SERVICES
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3
PROJECTION
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
MODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
SA-2-211
2-07 SA-2-220
SA-1-120SA-2-201
SA-2-202
SA-2-203
SA-2-204SA-2-205
SA-2-206SA-2-207
SA-2-208SA-2-209
SA-2-209
SA-2-210
SA-2-210
SA-2-212
2-08
SCALE 1 : 2SECTION C-C
BEADING
SOLDER
0.047 0.047 0.047 0.047
1.188 1.188 1.188 1.188
0.344 0.344 0.344 0.344
0.188 0.188 0.188 0.188
0.457 0.457 0.457 0.457
1.312 1.312 1.312 1.312
0.344 0.344 0.344 0.344
0.219 0.219 0.219 0.219
0.75 0.75 0.75 0.75
0.25 0.25 0.25 0.25 R0.078 R0.078 R0.078 R0.078
TAKE ALL HOLES OVER FROM 3-02
SCALE 1:2
3.25 3.25 3.25 3.25
8BA 8BA 8BA 8BA
2.686
2.686
2.686
2.686
3.124
3.124
3.124
3.124
0.25 0.25 0.25
0.25
C
C
BRS 8BA 8BA 8BA 8BA
0.2
0.2
0.2
0.2
R0.1
R0.1
R0.1
R0.1
0.131
0.131
0.131
0.131
0.094
0.094
0.094
0.094
0.075-3PL 0.075-3PL 0.075-3PL 0.075-3PL
0.422 0.422 0.422 0.422 0.422 0.422 0.422 0.422 R0.0
63
R0.0
63
R0.0
63
R0.0
63
0000....111122225555
BRSALU
00 00.. .. 33 3377 7755 55TT TTHH HH
0000....111122225555
00 00.. .. 55 55HH HHEE EEXX XX
3-03
3-02
SA-3-301
SA-3-302
SA-3-305
3-20
3-19
SA-3-305
3-11
3-21
3-18
BRS
SYN
0.125
0.125
0.125
0.125
1.125 1.125 1.125 1.125
0.25TH 0.25TH 0.25TH 0.25TH
0.375 0.375 0.375 0.375
0.25
0.25
0.25
0.25
0.063
0.063
0.063
0.063
1.25 1.25 1.25 1.25
BRS
0.188
0.188
0.188
0.188
0.063
0.063
0.063
0.063
0.25TH
0.25TH
0.25TH
0.25TH
0.313 0.313 0.313 0.313
0.125 0.125 0.125 0.125
3-05
3-05
3-29
SA-3-3013-04
3-07
BRSSEAL
0.375HEX
0.375HEX
0.375HEX
0.375HEX
0.125 0.125 0.125 0.125 0.25 0.25 0.25 0.25
0.031 0.031 0.031 0.031
0.25TH
0.25TH
0.25TH
0.25TH
3-15
3-153-13
SA-3-304
3-12
3-163-15
3-14
BRS
MS
3-09
3-10
3-08
SA-3-302
SCALE 1:1.5
0.063
0.063
0.063
0.063
0.188 0.188 0.188 0.188
1.175
1.175
1.175
1.175
0.094 0.094 0.094 0.094
3-15
3-13
3-14
3-123-15
3-153-16
SA-3-303
BRSSCALE 1:1.5
R1.625
BRS
0.75 0.75 0.75 0.75 0.873 0.873 0.873 0.873
R0.741
R0.741
R0.741
R0.741
1.6 1.6 1.6 1.6
SCALE 1:1.5
0.063
0.063
0.063
0.063
R0.313 R0.313
R0.313
R0.313
0.75 0.75 0.75 0.75
1.438 1.438 1.438 1.438
1 1 1 1
0.311
0.311
0.311
0.311 0.189
0.189
0.189
0.189
0.875 0.875 0.875 0.875
RH-WATER TANK
MIRROR IMAGE
BRS
BRS
SCALE 1:2.5
3.5 3.5 3.5 3.5 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 3.5 3.5 3.5 3.5
0.375
0.375
0.375
0.375
R1.56
0.109
0.109
0.109
0.109
1.375 1.375 1.375 1.375
0.687 0.687 0.687 0.687
0.625 0.625 0.625 0.625
0.75 0.75 0.75 0.75
1.25 1.25 1.25 1.25
0.25
0.25
0.25
0.25
0.165
0.165
0.165
0.165
R0.5
R0.5
R0.5
R0.5
BRS
BRS
2.437
2.437
2.437
2.437
0.656
0.656
0.656
0.656 0.656
0.656
0.656
0.656
0.063 0.063 0.063 0.063
0.656
0.656
0.656
0.656
0.937 0.937 0.937 0.937
0.031
0.031
0.031
0.031
8BA
8BA
8BA
8BA
SOLDER
6BA
6BA
6BA
6BA
0.094 0.094 0.094 0.094
0.25
0.25
0.25
0.25
0.375 0.375 0.375 0.375
0.047 0.047 0.047 0.047
0.375
0.375
0.375
0.375
BRS
SCALE 1:2
0.75
0.75
0.75
0.75
0.75 0.75 0.75 0.75
0.75 0.75 0.75 0.75
0.563
0.563
0.563
0.563
2.047
2.047
2.047
2.047
0.687 0.687 0.687 0.687
0.813 0.813 0.813 0.813
0.031 THICKCOLLAR HEIGHT 0.25 SOLDER
SCALE 1:2.5
0.92
0.92
0.92
0.92
4.625 4.625 4.625 4.625
0.625 0.625 0.625 0.625 0.75 0.75 0.75 0.75
0.46
0.46
0.46
0.46
4.625 4.625 4.625 4.625
SOLDER ENDS WATER TIGHT0.142 0.142 0.142 0.142
0.438 0.438 0.438 0.438
1.941 1.941 1.941 1.941
0.063 0.063 0.063 0.063 LH-WATER TANKBRS
1.313 1.313 1.313 1.313
1.125PCD
1.125PCD
1.125PCD
1.125PCD
1.125PCD
1.125PCD
1.125PCD
1.125PCD
2-27
2-27
2-28
2-24
2-26
2-26
2-23
2-25
SA-3-308
CU
CU
SCALE 1:2
0.5 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.5
0.626
0.626
0.626
0.626
0.25 0.25 0.25 0.25
0.5 0.5 0.5 0.5
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.438
0.438
0.438
0.438
0.25 0.25 0.25 0.25
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.25 0.25 0.25 0.25
0.375 0.375 0.375 0.375
0.375 0.375 0.375 0.375 R0
.125
R0.125
R0
.125
R0.125
3 3 3 3
0.094
0.094
0.094
0.094
CU
SCALE 1:3
3 3 3 3
3.125
3.125
3.125
3.125 1.25 1.25 1.25 1.25
3.719 3.719 3.719 3.719
1 1 1 1
STRAP 0.094THICK
CU
SCALE 1:2
0.187
0.187
0.187
0.187
0.251
0.251
0.251
0.251
0.438
0.438
0.438
0.438
1.251
1.251
1.251
1.251
0.438
0.438
0.438
0.438
0.5 0.5 0.5 0.5
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
0.25 0.25 0.25 0.25
0.25 0.25 0.25 0.25
0.375 0.375 0.375 0.375
0.375 0.375 0.375 0.375
3.313
3.313
3.313
3.313
0.094
0.094
0.094
0.094
R0.125 R0.125 R0.125 R0.125
CU
0.5
0.5
0.5
0.5
0.406
0.406
0.406
0.406
7.625 7.625 7.625 7.625
CU
0.375
0.375
0.375
0.375
0.305
0.305
0.305
0.305
7.625 7.625 7.625 7.625
0.188
0.188
0.188
0.188
11.5 11.5 11.5 11.5
0000....22225555
0.188 0.188 0.188 0.188
0.219
0.219
0.219
0.219
0.313TH
0.313TH
0.313TH
0.313TH
0.406HEX
0.406HEX
0.406HEX
0.406HEX
0.25 0.25 0.25 0.25 MS/S/S
0.063 THICK SCALE 1:2
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.188 0.188 0.188 0.188 0.438 0.438 0.438 0.438
0.3 0.3 0.3 0.3 0.172 0.172 0.172 0.172
0.281
0.281
0.281
0.281
1.831 1.831 1.831 1.831
SCALE 1:5HEAT INSULATION MATERIAL
3.532 3.532 3.532 3.532
3.125
3.125
3.125
3.125
3.21
3.21
3.21
3.21
3.25 3.25 3.25 3.25
0.65 0.65 0.65 0.65
ALU SCALE 1:2
BRS
1.594 1.594 1.594 1.594 0.156 0.156 0.156 0.156
1.172 1.172 1.172 1.172
1.172 1.172 1.172 1.172
3.21
3.21
3.21
3.21
0.65 0.65 0.65 0.65
0000....111155556666 0.156 0.156 0.156 0.156
1.922 1.922 1.922 1.922 0000....444455554444
3.25
3.25
3.25
3.25
BRS
R1.625
2.466
2.466
2.466
2.466
1.344 1.344 1.344 1.344
R0.766
R0.766
R0.766
R0.766
0.031
0.031
0.031
0.031
1.532
1.532
1.532
1.532
0.142 0.142 0.142 0.142
2 2 2 2
BRS
SEAL
0.5
0.5
0.5
0.5
0.25TH
0.25TH
0.25TH
0.25TH
0.375TH
0.375TH
0.375TH
0.375TH
0.25 0.25 0.25 0.25
0.375 0.375 0.375 0.375
0.625 0.625 0.625 0.625
00 00.. .. 33 3311 11 33 33TT TTHH HH
0.125 0.125 0.125 0.125
00 00.. .. 55 55TT TTHH HH
0.188 0.188 0.188 0.188
00 00.. .. 44 4433 3388 88
0.406 0.406 0.406 0.406
0.313TH 0.313TH 0.313TH 0.313TH
0.625
0.625
0.625
0.625
0.188 0.188 0.188 0.188 0.156 0.156 0.156 0.156
CU
SCALE 1:3
3.5 3.5 3.5 3.5
3.125
3.125
3.125
3.125
3.907 3.907 3.907 3.907
3 3 3 3
0.5 0.5 0.5 0.5
SCALE 1:3
CU
0.375 0.375 0.375 0.375
3.125
3.125
3.125
3.125
3.313
3.313
3.313
3.313
5 5 5 5
0.094
0.094
0.094
0.094
0.281 0.281 0.281 0.281
CU
SCALE 1:3
2 2 2 2
0.625 0.625 0.625 0.625
0.5 0.5 0.5 0.5 0.438 0.438 0.438 0.438
1.938 1.938 1.938 1.938
0.438
0.438
0.438
0.438
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.625
0.625
0.625
0.625 3.125
3.125
3.125
3.125
3.313
3.313
3.313
3.313
1.938 1.938 1.938 1.938
0.5
0.5
0.5
0.5
2
2
2
2
5 5 5 5
0.375 0.375 0.375 0.375
0.25 0.25 0.25 0.25
0.094
0.094
0.094
0.094
CU
SCALE 1:3
0.5 0.5 0.5 0.5
0.5 0.5 0.5 0.5 1.063 1.063 1.063 1.063
2.375 2.375 2.375 2.375 1 1 1 1 0.625 0.625 0.625 0.625
5 5 5 5
5.188
5.188
5.188
5.188
1.933 1.933 1.933 1.933
BRZ
SCALE 1.5:1
0.125
0.125
0.125
0.125 4BA 4BA 4BA 4BA
0.313 0.313 0.313 0.313
0.125
0.125
0.125
0.125
0.25 0.25 0.25 0.25
BRZ
3-01
3-22
3-17 3-17
3-22
3-22
SA-3-306
SA-3-310
5-22
SA-3-306
SA-3-305
SA-3-303
SA-3-304
SA-3-306
J.A.M. DE WAAL PAPAKURA NZ
JDWDSJDWDSJDWDSJDWDSPROJECT No 07B-10-00
CALLED "TOBY".PARTS AND ASSEMBLIES
MAY-2016
SHEET: 07 OF 14 No: TOBY-07
DATEJDW DRAUGHTING SERVICESMODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE PROJECTION
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110. NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
4-18
4-01
4-02
4-03
4-04
4-05
4-06
4-07
4-29
4-09
4-10
4-11
4-12
4-13
4-14
4-15
4-16
4-17
4-08
4-19
4-20
4-21
4-22
4-23
4-24
4-25
4-26
4-27
4-28
4-32
S/SPF
0.25
0.25
0.25
0.25
1
1
1
1
0.218
0.218
0.218
0.218
0.313TH
0.313TH
0.313TH
0.313TH
0.157 0.157 0.157 0.157 0.25 0.25 0.25 0.25
0.563 0.563 0.563 0.563
0.093 0.093 0.093 0.093
0.125 0.125 0.125 0.125
0.094 0.094 0.094 0.094
45°
45°
45°
45°
BRSSYN
O-RING
0.313 0.313 0.313 0.313
0.5TH
0.5TH
0.5TH
0.5TH
0.625HEX
0.625HEX
0.625HEX
0.625HEX
0.25
0.25
0.25
0.25
0.328
0.328
0.328
0.328
0.039 0.039 0.039 0.039 0.188 0.188 0.188 0.188
BRZ
BRAZE
PLUG
SCALE 1:1.5 0.078 0.078 0.078 0.078
0.188 0.188 0.188 0.188
0000....22225555
3.625 3.625 3.625 3.625
0000....22225555TTTTHHHH
0.188
0.188
0.188
0.188
0.25 0.25 0.25 0.25
0.25 0.25 0.25 0.25
0.219TH 0.219TH 0.219TH 0.219TH
0.078 0.078 0.078 0.078
0.07
0.07
0.07
0.07
CU
BRS 0.969 0.969 0.969 0.969
0.188
0.188
0.188
0.188
R0.306
R0.306
R0.306
R0.306
0.475 0.475 0.475 0.475 0.219 0.219 0.219 0.219
0.156 0.156 0.156 0.156
0.334
0.334
0.334
0.334 0.031
0.031
0.031
0.031
0.25 0.25 0.25 0.25
0.156
0.156
0.156
0.156
0.828
0.828
0.828
0.828
CU
BRSREFER TO 4-26
1.047
1.047
1.047
1.047
0.969 0.969 0.969 0.969
0.575 0.575 0.575 0.575
0.575
0.575
0.575
0.575
R0.206
R0.206
R0.206
R0.206
S/S
BRS
0.25TH 0.25TH 0.25TH 0.25TH
0.25
0.25
0.25
0.25
0.375 0.375 0.375 0.375 0.219
0.219
0.219
0.219
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.125 0.125 0.125 0.125
0.25TH 0.25TH 0.25TH 0.25TH
0.219 0.219 0.219 0.219
0.5
0.5
0.5
0.5
S/S
S S S S 0.188 0.188 0.188 0.188
SEAL
0.375HEX 0.375HEX 0.375HEX 0.375HEX
0.094
0.094
0.094
0.094
0.313
0.313
0.313
0.313
0.25TH 0.25TH 0.25TH 0.25TH
BRS
SEAL
0.375TH 0.375TH 0.375TH 0.375TH
0.188 0.188 0.188 0.188
0.25
0.25
0.25
0.25 0.25
0.25
0.25
0.25
0.625
0.625
0.625
0.625
0.125
0.125
0.125
0.125
0.219
0.219
0.219
0.219
0.25
0.25
0.25
0.25
0.5 0.5 0.5 0.5
0.438 0.438 0.438 0.438 0.438 0.438 0.438 0.438
0.25
0.25
0.25
0.25
0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
0.25
0.25
0.25
0.25
4BA 4BA 4BA 4BA 0.1 0.1 0.1 0.1
SA-3-310
SA-2-220SA-3-315
0.125
0.125
0.125
0.125
0.313TH 0.313TH 0.313TH 0.313TH
0.25
0.25
0.25
0.25
0.5 0.5 0.5 0.5
0.438 0.438 0.438 0.438
BRZ
0.375TH 0.375TH 0.375TH 0.375TH
0.625 0.625 0.625 0.625
0.125
0.125
0.125
0.125
0.25
0.25
0.25
0.25
BRZ
1.063 1.063 1.063 1.063
0.25
0.25
0.25
0.25
0.188
0.188
0.188
0.188
6BA 6BA 6BA 6BA
1.313 1.313 1.313 1.313
0.875
0.875
0.875
0.875
BRZ
BRZCU
SCALE 1:1.5
0.188
0.188
0.188
0.188
0.375
0.375
0.375
0.375
1.312
1.312
1.312
1.312
1.625
1.625
1.625
1.625
TAKE OVER FROM 4-13
0.875 0.875 0.875 0.875
0.375TH
0.375TH
0.375TH
0.375TH
0.11 0.11 0.11 0.11
0.755 0.755 0.755 0.755
1.313
1.313
1.313
1.313
3 3 3 3
0.328
0.328
0.328
0.328
3 3 3 3
0.781
0.781
0.781
0.781
MS
SCALE 2:1
0.094
0.094
0.094
0.094
0.063
0.063
0.063
0.063
0.125 0.125 0.125 0.125
SA-4-404
SA-4-403
SA-4-401
4-154-15
SA-4-405
4-174-17
4-164-16
4-18
4-224-24
SA-4-406
4-25
4-23
0.375
0.375
0.375
0.375
0.125 0.125 0.125 0.125
0.063 0.063 0.063 0.063
0.172
0.172
0.172
0.172
00 00.. .. 00 0066 6633 33
00 00.. .. 11 1177 7722 22
MS/S/S
0.094 0.094 0.094 0.094 2.625 2.625 2.625 2.625
11 1100 00BB BBAA AA
10BA
10BA
10BA
10BA
0000....000099994444
0.063 0.063 0.063 0.063
BRZ
0.5 0.5 0.5 0.5
0.25TH 0.25TH 0.25TH 0.25TH
0.125
0.125
0.125
0.125
0.25
0.25
0.25
0.25
0.438 0.438 0.438 0.438
BRS
SEAL
0.375TH 0.375TH 0.375TH 0.375TH
0.313
0.313
0.313
0.313 0.094
0.094
0.094
0.094
0.5HEX 0.5HEX 0.5HEX 0.5HEX
4-05
SA-4-401
4-02
4-03
4-04
4-06
SA-4-402
4-08 4-10
4-46
4-46
SA-4-407
4-12
SA-4-408
SA-4-406
4-28
4-26
SA-4-407
4-27
4-29
4-34SA-4-408
4-38
4-37
4-37
4-354-35
4-364-31
4-44
4-44
4-324-33
SA-4-410
4-404-40
SA-4-409
4-39
4-41
4-45
4-42
SA-4-410
4-45
4-45
4-43
0.063 0.063 0.063 0.063
0.063
0.063
0.063
0.063 R0
.094
R0.094
R0
.094
R0.094
0.094 0.094 0.094 0.094 1.031 1.031 1.031 1.031
0.438 0.438 0.438 0.438 0.094
0.094
0.094
0.094
0.063 0.063 0.063 0.063
0.188
0.188
0.188
0.188
0.063 0.063 0.063 0.063
BRS
0.063 THICK SCALE 1:1.5
0.773 0.773 0.773 0.773
0.2 0.2 0.2 0.2
0.813 0.813 0.813 0.813 0.813 0.813 0.813 0.813
0.637 0.637 0.637 0.637 0.637 0.637 0.637 0.637 0.488 0.488 0.488 0.488 0.488 0.488 0.488 0.488
R0.157
R0.157
R0.157
R0.157
R0.1 R0.1 R0.1 R0.1
R0.157
R0.157
R0.157
R0.157
0.156 0.156 0.156 0.156
0.11-2PL 0.11-2PL 0.11-2PL 0.11-2PL
0.156 0.156 0.156 0.156
0.875
0.875
0.875
0.875
0.969
0.969
0.969
0.969
0.492 0.492 0.492 0.492
1.312
1.312
1.312
1.312
0.773 0.773 0.773 0.773
0.125
0.125
0.125
0.125
0.281
0.281
0.281
0.281 0.188
0.188
0.188
0.188
0.656 0.656 0.656 0.656
0.172 0.172 0.172 0.172
0.844
0.844
0.844
0.844
0.531
0.531
0.531
0.531
SEAL
1.063 1.063 1.063 1.063
0.25TH-6PL 0.25TH-6PL 0.25TH-6PL 0.25TH-6PL
0.25
0.25
0.25
0.25 0.5
0.5
0.5
0.5
0.532 0.532 0.532 0.532
0.375TH 0.375TH 0.375TH 0.375TH
0.375 0.375 0.375 0.375
0.25
0.25
0.25
0.25
0.532 0.532 0.532 0.532
0.5 0.5 0.5 0.5
0.188 0.188 0.188 0.188
1.063 1.063 1.063 1.063 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.114
0.114
0.114
0.114
0.281
0.281
0.281
0.281
BRS
MS/S/S
J.A.M. DE WAAL PAPAKURA NZ
JDWDSJDWDSJDWDSJDWDSPROJECT No 07B-10-00
CALLED "TOBY".PARTS AND ASSEMBLIES
MAY-2016
SHEET: 08 OF 14 No: TOBY-08
DATEJDW DRAUGHTING SERVICESMODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE PROJECTION
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110. NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
4-46
4-30 4-31
4-33
4-34
4-35
4-36
4-37
4-38
4-39
4-40
4-41
4-42
4-43
4-44
4-45
4-47
SA-4-403
4-30
4-14
4-21
4-20
4-19
4-07
4-09
4-12
4-13
SA-4-402
4-12
SA-4-405
MS/S/S
0.063 0.063 0.063 0.063
0.063 0.063 0.063 0.063
SCALE 1:2
0.969
0.969
0.969
0.969
0.875
0.875
0.875
0.875
0.125
0.125
0.125
0.125
0.256
0.256
0.256
0.256
0.773 0.773 0.773 0.773 0.773 0.773 0.773 0.773
0.813 0.813 0.813 0.813 0.813 0.813 0.813 0.813
0.2 0.2 0.2 0.2
0.11 0.11 0.11 0.11
0.063 0.063 0.063 0.063
0.11 0.11 0.11 0.11
MS/S/S
0.25 0.25 0.25 0.25
3.5 3.5 3.5 3.5
6BA
6BA
6BA
6BA
6BA
6BA
6BA
6BA
0.25 0.25 0.25 0.25 0.188
0.188
0.188
0.188
SCALE 1.5:1
0.25
0.25
0.25
0.25
0.11
0.11
0.11
0.11
0.063 0.063 0.063 0.063 MS
=0.188=
=0.188=
=0.188=
=0.188=
0.375
0.375
0.375
0.375
0.14 0.14 0.14 0.14
=0.766=
=0.766=
=0.766=
=0.766=
0.063PF 0.063PF 0.063PF 0.063PF
R0.1 R0.1 R0.1 R0.1
BRS
MS
0.156
0.156
0.156
0.156
0.063
0.063
0.063
0.063
R0.094 R0.094 R0.094 R0.094
0.188 0.188 0.188 0.188
BRS
0.063 0.063 0.063 0.063
1.438
1.438
1.438
1.438
2.25 2.25 2.25 2.25
0.063
0.063
0.063
0.063
R1.657
SCALE 1:1.5
1.125 1.125 1.125 1.125 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75
0.375
0.375
0.375
0.375 0.375
0.375
0.375
0.375
0.086 0.086 0.086 0.086 0.086 0.086 0.086 0.086
0.063
0.063
0.063
0.063
0.625
0.625
0.625
0.625
BRS
SCALE 1:2
MS/S/S
1.247
1.247
1.247
1.247
1.111
1.111
1.111
1.111
0.063 0.063 0.063
0.063 R0.3 R0.3
0.813 0.813 0.813 0.813
0.11 0.11 0.11 0.11 0.11 0.11 0.11 0.11
0.813 0.813 0.813 0.813
MSREFER PART 3-15
1.5 1.5 1.5 1.5
0.078
0.078
0.078
0.078 MS/S/S
SCALE 1:1.5
0.094 0.094 0.094 0.094
1.625 1.625 1.625 1.625 0.047
0.047
0.047
0.047
1.625 1.625 1.625 1.625
0.063-3PL 0.063-3PL 0.063-3PL 0.063-3PL
MS/S/S
1.563 1.563 1.563 1.563
0.5 0.5 0.5 0.5
1.375PCD
1.375PCD
1.375PCD
1.375PCD
0.453
0.453
0.453
0.453
0.11
0.11
0.11
0.11
0.016 0.016 0.016 0.016
0.281TH 0.281TH 0.281TH 0.281TH
1.375PCD 1.375PCD 1.375PCD 1.375PCD
0.086 0.086 0.086 0.086
113° 113° 113° 113°
0.783
0.783
0.783
0.783
6.25 6.25 6.25 6.25
0.5
0.5
0.5
0.5
0.016
0.016
0.016 0.016
5.578 5.578 5.578 5.578
4.328
4.328
4.328
4.328
0.148 0.148 0.148 0.148
0.25 0.25 0.25 0.25
0.25
0.25
0.25
0.25
0.047 0.047 0.047 0.047
0.148
0.148
0.148
0.148
0.098-4PL 0.098-4PL 0.098-4PL 0.098-4PL
5-11A
5-08
5-07
5-10
5-09
5-10
5-11B5-06
SA-5-5025-30A
5-27
5-28
5-28
5-29
5-25
5-26
5-24
5-30B 5-31
5-31
5-32
SA-5-506
0.125
0.125
0.125
0.125
0.063 0.063 0.063 0.063
0.063
0.063
0.063
0.063
0.281
0.281
0.281
0.281
0.125 0.125 0.125 0.125
0.094PF
0.094PF
0.094PF
0.094PF
=0.266= =0.266= =0.266= =0.266=
S S S S 0.156 0.156 0.156 0.156
5-20
5-21
5-19
SA-5-505
0.063 THICKSCALE 1:1.5
1.5 1.5 1.5 1.5
0.094 0.094 0.094 0.094 0.094 0.094 0.094 0.094
R0.125
R0.125
R0.125
R0.125
S/SSYN
0.375
0.375
0.375
0.375
0.125 0.125 0.125 0.125
0.25TH
0.25TH
0.25TH
0.25TH
R0.125
R0.125
R0.125
R0.125
0.125 0.125 0.125 0.125
6BA 6BA 6BA 6BA
0.156
0.156
0.156
0.156
0.219
0.219
0.219
0.219
S/S
BRS
SEAL
R0.188
R0.188
R0.188
R0.188
0.375CF
0.375CF
0.375CF
0.375CF
0.125 0.125 0.125 0.125
0.38
0.38
0.38
0.38
0.125 0.125 0.125 0.125
0.25
0.25
0.25
0.25
0.094 0.094 0.094 0.094
0.391
0.391
0.391
0.391
5-185-16
5-17
SA-5-504
SCALE 1:3
1.281 1.281 1.281 1.281 1.656 1.656 1.656 1.656 1.656 1.656 1.656 1.656 1.281 1.281 1.281 1.281
R1.656
R1.656
R1.656
R1.656
1.844
1.844
1.844
1.844
2.906
2.906
2.906
2.906
1.359
1.359
1.359
1.359
1.938 1.938 1.938 1.938
R7
R7
R7
R7
1.25 1.25 1.25 1.25
1.938 1.938 1.938 1.938
1.25 1.25 1.25 1.25
5-02
5-03
5-05
5-04
5-01
SA-5-501
5-22
SA-5-501
SA-5-502
SA-5-510
SA-5-5035-23
SA-5-504
SA-4-420BRS
BRS
BRS
SCALE 1:2
0.625 0.625 0.625 0.625 1.875 1.875 1.875 1.875
R0.125
R0.125
R0.125
R0.125
0.094 0.094 0.094 0.094
0.25
0.25
0.25
0.25
5-15
5-12
5-13
5-14
SA-5-503
PRESS FIT
0.094 0.094 0.094 0.094
0.125
0.125
0.125
0.125
7BA 7BA 7BA 7BA
7BA 7BA 7BA 7BA
0.063
0.063
0.063
0.063
BRS
0.203 0.203 0.203 0.203 0.5 0.5 0.5 0.5
0.344 0.344 0.344 0.344 0.125TH
0.125TH
0.125TH
0.125TH
0.063 0.063 0.063 0.063
0.063 0.063 0.063 0.063
0.125
0.125
0.125
0.125
0.094
0.094
0.094
0.094
=0.375=
=0.375=
=0.375=
=0.375=
SEAL 0.156 0.156 0.156 0.156
0.25TH
0.25TH
0.25TH
0.25TH
0.313HEX
0.313HEX
0.313HEX
0.313HEX
0.156
0.156
0.156
0.156
0.04 0.04 0.04 0.04
0.219 0.219 0.219 0.219
0.328HEX 0.328HEX 0.328HEX 0.328HEX
0.313
0.313
0.313
0.313
0.141 0.141 0.141 0.141
0.203 0.203 0.203 0.203
0.219
0.219
0.219
0.219
0.094
0.094
0.094
0.094
0.438
0.438
0.438
0.438
0.141
0.141
0.141
0.141
0.25TH 0.25TH 0.25TH 0.25TH
S/S
SOLDER
1.102
1.102
1.102
1.102
R0.25
R0.25
R0.25
R0.25
0.125 0.125 0.125 0.125
0.203 0.203 0.203 0.203
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.359 0.359 0.359 0.359
0.156
0.156
0.156
0.156
0.25TH
0.25TH
0.25TH
0.25TH
0.125 0.125 0.125 0.125
0.188TH 0.188TH 0.188TH 0.188TH
0.219TH
0.219TH
0.219TH
0.219TH
0.188
0.188
0.188
0.188
0.281
0.281
0.281
0.281
0.25 0.25 0.25 0.25
0.156 0.156 0.156 0.156
0.359 0.359 0.359 0.359
PROPRIETY ITEM 0.125 0.125 0.125 0.125
0.219TH 0.219TH 0.219TH 0.219TH
0.219 0.219 0.219 0.219
0.109 0.109 0.109 0.109
BRS
SEAL
0.219 0.219 0.219 0.219
0.219TH
0.219TH
0.219TH
0.219TH
0.281HEX
0.281HEX
0.281HEX
0.281HEX
0.125
0.125
0.125
0.125 0.156 0.156 0.156 0.156
0.03 0.03 0.03 0.03
0.156 0.156 0.156 0.156
0.219TH
0.219TH
0.219TH
0.219TH
0.125TH
0.125TH
0.125TH
0.125TH
0.281HEX
0.281HEX
0.281HEX
0.281HEX
0.031 0.031 0.031 0.031 0.125 0.125 0.125 0.125
BRS
CU
0.156 0.156 0.156 0.156
0.094 0.094 0.094 0.094
1.75
1.75
1.75
1.75
BRS
BRSSYN
S/S
BRS SYN
0.063
0.063
0.063
0.063 0.75
0.75
0.75
0.75
0.094 0.094 0.094 0.094
0.188 0.188 0.188 0.188
R0.078 R0.078 R0.078 R0.078
BRS
GLASS
0.188 0.188 0.188 0.188 0.156TH 0.156TH 0.156TH 0.156TH
0.188
0.188
0.188
0.188
0.188
0.188
0.188
0.188
0.5
0.5
0.5
0.5
0.25TH 0.25TH 0.25TH 0.25TH
0.125
0.125
0.125
0.125
0.25TH
0.25TH
0.25TH
0.25TH
0.438
0.438
0.438
0.438
0.578 0.578 0.578 0.578
0.25 0.25 0.25 0.25
0.156 0.156 0.156 0.156
0.094 0.094 0.094 0.094
S S S S 0.156 0.156 0.156 0.156
15 COILS
SPSS/S
BRS
BRS
SEAL 0.156TH 0.156TH 0.156TH 0.156TH
0.116
0.116
0.116
0.116 0.063
0.063
0.063
0.063
0.229HEX 0.229HEX 0.229HEX 0.229HEX
0.094 0.094 0.094 0.094
0.094
0.094
0.094
0.094
=0.156= =0.156= =0.156= =0.156=
J.A.M. DE WAAL PAPAKURA NZ
JDWDSJDWDSJDWDSJDWDSPROJECT No 07B-10-00
CALLED "TOBY".PARTS AND ASSEMBLIES
MAY-2016
SHEET: 09 OF 14 No: TOBY-09
DATEJDW DRAUGHTING SERVICESMODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE PROJECTION
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110. NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
SA-4-420SA-3-315
SA-4-404
SA-4-409
SEAL
0.125 0.125 0.125 0.125
0.25
0.25
0.25
0.25
0.281TH 0.281TH 0.281TH 0.281TH
0.375 0.375 0.375 0.375
0.625
0.625
0.625
0.625
0.688
0.688
0.688
0.688
0.375TH 0.375TH 0.375TH 0.375TH
0.25
0.25
0.25
0.25
0.125
0.125
0.125
0.125
0.72HEX 0.72HEX 0.72HEX 0.72HEX
BRS
SYN
0.219TH
0.219TH
0.219TH
0.219TH
0.188 0.188 0.188 0.188
0.313
0.313
0.313
0.313
0.125 0.125 0.125 0.125 0.188TH 0.188TH 0.188TH 0.188TH
0.156 0.156 0.156 0.156
0.25TH 0.25TH 0.25TH 0.25TH
0.125
0.125
0.125
0.125
0.25TH
0.25TH
0.25TH
0.25TH
0.438
0.438
0.438
0.438
0.391 0.391 0.391 0.391
0.328 0.328 0.328 0.328
0.1 0.1 0.1 0.1
0.813 0.813 0.813 0.813
0.078 0.078 0.078 0.078
0.063 0.063 0.063 0.063
0.188 0.188 0.188 0.188
0.188
0.188
0.188
0.188
6-06
5-01
5-02
5-03
5-04
5-05
5-06
5-07
5-08
5-09
5-10 5-11A
5-11B
5-12
5-13
5-14
5-15
5-16
5-17
5-18
5-19
5-20
5-21
5-22
5-23
524
5-25
5-26
5-27
5-28
5-29
5-30B
5-31
5-32
5-30A
6-01
6-02
6-03
6-04A
6-05A
6-07
BRS
SCALE 1:1.5
0.25
0.25
0.25
0.25
0.11
0.11
0.11
0.11
5.933
5.933
5.933
5.933
0.063 THICKSCALE 1:1.5
1 1 1 1
1.5 1.5 1.5 1.5
0.063 0.063 0.063 0.063
0.125
0.125
0.125
0.125
BRS
ANGLE 0.25x0.25x0.047
0.141
0.141
0.141
0.141
0.15 0.15 0.15 0.15
0.5
0.5
0.5
0.5
0.086 0.086 0.086 0.086
THESE HOLES TO MATCH 6-03
THESES HOLES TO MATCH 6-06
R0.25-4 CORNERS
2.25 2.25 2.25 2.25
0.189
0.189
0.189
0.189
0.75
0.75
0.75
0.75
2
2
2
2
3.313
3.313
3.313
3.313
0.189
0.189
0.189
0.189
0.875 0.875 0.875 0.875
1.33
1.33
1.33
1.33
2.25 2.25 2.25 2.25
FOR ALL OTHER DIMENSION DETAILS REFER TO 6-03 0
.132
0.132
0.132
0.132
0000....222200003333 0.203 0.203 0.203 0.203
00 00.. .. 11 1133 3322 22
MIRROR IMAGE OF 6-05A
6-05B
0.313
0.313
0.313
0.313
0.047 0.047 0.047 0.047
0.25 0.25 0.25 0.25
SCALE 1:1.5
0.403 0.403 0.403 0.403
0.203 0.203 0.203 0.203
5.331 5.331 5.331 5.331
0.2 0.2 0.2 0.2
5.837 5.837 5.837 5.837
0.086 0.086 0.086 0.086
R0.875
R0.875
R0.875
R0.875
33 33
3.685 3.685 3.685 3.685
4.625 4.625 4.625 4.625
0.5 0.5 0.5 0.5
0.119
0.119
0.119
0.119 0.086-2PL 0.086-2PL 0.086-2PL 0.086-2PL
R7
ANGLE 0.25x0.25x0.047SCALE 1:2
2.891 2.891 2.891 2.891
=45° =45° =45° =45° 6x7.5 6x7.5 6x7.5 6x7.5
00 00.. .. 99 99
2.891 2.891 2.891 2.891
R7
SCALE 1:3
0.047
0.047
0.047
0.047
BRS
MIRROR IMAGE OF 6-04A
6-04B
BRS
ALU
S/S
BRS
0.125
0.125
0.125
0.125
0.5 0.5 0.5 0.5
0.563 0.563 0.563 0.563
0.25
0.25
0.25
0.25
0.125 TUBING
SCALE 1:3
7.918 7.918 7.918 7.918
0.5
0.5
0.5
0.5
R0.251
R0.251
R0.251
R0.251
R0.251
R0.251
R0.251
R0.251
3.635 3.635 3.635 3.635
3.126
3.126
3.126
3.126
0.125 0.125 0.125 0.125
0.925
0.925
0.925
0.925
0.688
0.688
0.688
0.688
0.313
0.313
0.313
0.313
0.25TH 0.25TH 0.25TH 0.25TH
0.438
0.438
0.438
0.438
0.219 0.219 0.219 0.219
0.156
0.156
0.156
0.156
0.156
0.156
0.156
0.156
0.094 0.094 0.094 0.094
0.219 0.219 0.219 0.219
0.25TH 0.25TH 0.25TH 0.25TH
0.375 0.375 0.375 0.375
0.188TH
0.188TH
0.188TH
0.188TH
0.438
0.438
0.438
0.438
0.313
0.313
0.313
0.313
CU
BRS
BRZ
CU
1.381
1.381
1.381
1.381
110°
110°
110°
110°
0.141 0.141 0.141 0.141
SOLDER
SCALE 1:1.5
1 1 1 1 0.313 0.313 0.313 0.313 0.313 0.313 0.313 0.313
0.438
0.438
0.438
0.438
0.594
0.594
0.594
0.594
0.281 0.281 0.281 0.281 0.281 0.281 0.281 0.281 1.188 1.188 1.188 1.188
0.094
0.094
0.094
0.094
0.375RM
0.375RM
0.375RM
0.375RM
0.375PF
0.375PF
0.375PF
0.375PF 0.125 0.125 0.125 0.125
0.188TH
0.188TH
0.188TH
0.188TH
0.094
0.094
0.094
0.094
0.297 0.297 0.297 0.297
BRS
S/S
0.25TH 0.25TH 0.25TH 0.25TH 0.063
0.063
0.063
0.063
0.156
0.156
0.156
0.156 0.094
0.094
0.094
0.094
0.25
0.25
0.25
0.25
0.063 0.063 0.063 0.063
BRS
SCALE 1:2
0.5
0.5
0.5
0.5
0.5 0.5 0.5 0.5
0.563 0.563 0.563 0.563
0.75
0.75
0.75
0.75
0.125 0.125 0.125 0.125
2.25
2.25
2.25
2.25
REFER TO 5-11A
SCALE 1.5:1
0.125TH 0.125TH 0.125TH 0.125TH
0.094
0.094
0.094
0.094
0.173 0.173 0.173 0.173
0.375 0.375 0.375 0.375
=0.375=
=0.375=
=0.375=
=0.375=
0.063 0.063 0.063 0.063
0.125
0.125
0.125
0.125
0.063 0.063 0.063 0.063
BRS
6BA 6BA 6BA 6BA
0.281
0.281
0.281
0.281
0.719 0.719 0.719 0.719 0.719 0.719 0.719 0.719 0.281
0.281
0.281
0.281
0.082 0.082 0.082 0.082
BRS
SCALE 1:1.5
0.125
0.125
0.125
0.125
0.313
0.313
0.313
0.313
0.125 0.125 0.125 0.125
0.375
0.375
0.375
0.375
0.25TH 0.25TH 0.25TH 0.25TH
0.125
0.125
0.125
0.125 0.125
0.125
0.125
0.125
0.125
0.125
0.125
0.125
0.5 0.5 0.5 0.5
0.125 TUBINGSCALE 1:2
0.813 0.813 0.813 0.813 0.623 0.623 0.623 0.623
1.046
1.046
1.046
1.046 R0.188
R0.188
R0.188
R0.188
0.375
0.375
0.375
0.375
0.094 0.094 0.094 0.094
0.25TH
0.25TH
0.25TH
0.25TH
0.094 0.094 0.094 0.094
0.094 0.094 0.094 0.094
0.5
16
0.5
16
0.5
16
0.5
16
0.1
09
0.1
09
0.1
09
0.1
09
0.016 0.016 0.016 0.016
3°
3°
3°
3°
1.7
5
1.7
5
1.7
5
1.7
5
0.0
47
0.0
47
0.0
47
0.0
47
0.047 0.047 0.047 0.047
7-16
7-01
7-02
7-03
7-04
7-05
7-07
7-08
7-09
7-10
7-11
7-12
7-06
7-14
7-15
7-17
BRZ
00 00.. .. 22 22
88 8822 22
0000....22225555RRRRMMMM
0000....22225555 0.25 0.25 0.25 0.25
00 00.. .. 22 22
88 8822 22
0.1
41
0.1
41
0.1
41
0.1
41
SCALE 1:1.3
0.3
13P
F
0.3
13P
F
0.3
13P
F
0.3
13P
F
1.375 1.375 1.375 1.375
2 2 2 2
0.6
25
0.6
25
0.6
25
0.6
25
A
A
0.156 0.156 0.156 0.156
0.4
3
0.4
3
0.4
3
0.4
3
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.0
63
0.0
63
0.0
63
0.0
63
0.1
25
0.1
25
0.1
25
0.1
25
MS 0.2
5
0.2
5
0.2
5
0.2
5
0.1
25
0.1
25
0.1
25
0.1
25
0.125 0.125 0.125 0.125 0.1560.1560.1560.156 0.281 0.281 0.281 0.281
0.2
81
0.2
81
0.2
81
0.2
81
0.234 0.234 0.234 0.234
0.094 0.094 0.094 0.094
0.125 0.125 0.125 0.125
0.047 0.047 0.047 0.047 0.2
73
0.2
73
0.2
73
0.2
73 0.047 0.047 0.047 0.047 0
.273
0.2
73
0.2
73
0.2
73
0.047 0.047 0.047 0.047
0.188 0.188 0.188 0.188
0.375 0.375 0.375 0.375
0.188 0.188 0.188 0.188
0.266 0.266 0.266 0.266 0.266 0.266 0.266 0.266
0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
0.3
2
0.3
2
0.3
2
0.3
2
0.3
24
0
.324
0
.324
0
.324
0.234 0.234 0.234 0.234
1.0
47
1.0
47
1.0
47
1.0
47
0.098
0.098
0.098
0.098
0.375 0.375 0.375 0.375
0.094 0.094 0.094 0.094
0.766 0.766 0.766 0.766
0.2
5
0.2
5
0.2
5
0.2
5
0.313 0.313 0.313 0.313
0.5
0
.5
0.5
0
.5
0.2
5
0.2
5
0.2
5
0.2
5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.11-8PL 0.11-8PL 0.11-8PL 0.11-8PL
0.5 0.5 0.5 0.5
0.2
5
0.2
5
0.2
5
0.2
5
0.343 0.343 0.343 0.343
R0.25
R0.25
R0.25
R0.25 0.188 0.188 0.188 0.188
0.2
5
0.2
5
0.2
5
0.2
5
MS 0.125 THICK SCALE 1:2
1.5 1.5 1.5 1.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2.313 2.313 2.313 2.313 2.313 2.313 2.313 2.313
(8.625) (8.625) (8.625) (8.625)
1.5 1.5 1.5 1.5
0.125 0.125 0.125 0.125
0.3
09
0.3
09
0.3
09
0.3
09
0.3
2
0.3
2
0.3
2
0.3
2
2 2 2 2
0.2
5
0.2
5
0.2
5
0.2
5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.2
5
0.2
5
0.2
5
0.2
5
1.063 1.063 1.063 1.063 1.063 1.063 1.063 1.063 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.313 0.313 0.313 0.313 2 2 2 2
0.125 0.125 0.125 0.125
0.25 0.25 0.25 0.25
R0.2
5
R0.2
5
R0.2
5
R0.2
5
0.047-4PL 0.047-4PL 0.047-4PL 0.047-4PL
0.11-9PL 0.11-9PL 0.11-9PL 0.11-9PL 0.9
46
0.9
46
0.9
46
0.9
46
0.098-8PL 0.098-8PL 0.098-8PL 0.098-8PL
MS
0.297 0.297 0.297 0.297
1.75 1.75 1.75 1.75
0.2
5
0.2
5
0.2
5
0.2
5
0.047 0.047 0.047 0.047 0.25 0.25 0.25 0.25
2 2 2 2
1 1 1 1 1.25 1.25 1.25 1.25
1.5 1.5 1.5 1.5
0.0
47
0.0
47
0.0
47
0.0
47
J.A.M. DE WAAL PAPAKURA NZ
JDWDSJDWDSJDWDSJDWDSPROJECT No 07B-10-00
CALLED "TOBY".PARTS AND ASSEMBLIES
MAY-2016
SHEET: 10 OF 14 No: TOBY-10
DATEJDW DRAUGHTING SERVICESMODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE PROJECTION
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110. NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
MS/ALU
0.531 0.531 0.531 0.531
=0.2
5=
=0.2
5=
=0.2
5=
=0.2
5=
0.5
0
.5
0.5
0
.5
2B
A
2B
A
2B
A
2B
A
0.375 0.375 0.375 0.375
0.406 0.406 0.406 0.406
0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039
6B
A
6B
A
6B
A
6B
A
0.188 0.188 0.188 0.188
6B
A
6B
A
6B
A
6B
A
0.188 0.188 0.188 0.188 0.25 0.25 0.25 0.25
MS
MS/ALU
SA-6-601
SA-5-510SA-6-601
SPS
0.25 THICK SCALE 1:2
1.438 1.438 1.438 1.438 1.563 1.563 1.563 1.563 1.438 1.438 1.438 1.438 1.563 1.563 1.563 1.563
0.2
5
0.2
5
0.2
5
0.2
5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
2
2
2
2
0.185 0.185 0.185 0.185
0.11-8PL 0.11-8PL 0.11-8PL 0.11-8PL
MS/ALU
0.188 0.188 0.188 0.188
0.063 0.063 0.063 0.063
0.1
88
0.1
88
0.1
88
0.1
88
== ==00 00.. .. 44 44
33 33== ==
0.3
68
0.3
68
0.3
68
0.3
68
0000....111188888888
0000....111155556666
15 COILS
0.156 0.156 0.156 0.156
0.0
47
0.0
47
0.0
47
0.0
47 0.062PF 0.062PF 0.062PF 0.062PF
0.43 0.43 0.43 0.43 0.438 0.438 0.438 0.438
0.2
5CF
0.2
5CF
0.2
5CF
0.2
5CF
0.313PF 0.313PF 0.313PF 0.313PF 0.313PF 0.313PF 0.313PF 0.313PF 0.25CF 0.25CF 0.25CF 0.25CF
2.335 2.335 2.335 2.335 0.6 0.6 0.6 0.6 0.438 0.438 0.438 0.438 0.6 0.6 0.6 0.6
0.375 0.375 0.375 0.375
SCALE 1:2
1.563 1.563 1.563 1.563 1.438 1.438 1.438 1.438 1.438 1.438 1.438 1.438
0.2
5
0.2
5
0.2
5
0.2
5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
0.5
0
.5
2
2
2
2
0.25 0.25 0.25 0.25
0.875 0.875 0.875 0.875
1.563 1.563 1.563 1.563
0.875 0.875 0.875 0.875
0.25 0.25 0.25 0.25
0.185 0.185 0.185 0.185
R0.1 R0.1 R0.1 R0.1
0.11-8PL 0.11-8PL 0.11-8PL 0.11-8PL
0.6
25
0.6
25
0.6
25
0.6
25
BRS
2.25 2.25 2.25 2.25
0.25 0.25 0.25 0.25
2.25 2.25 2.25 2.25 0.1
25
0.1
25
0.1
25
0.1
25 6BA 6BA 6BA 6BA
MS/ALU
SCALE 1:1.5
0.313 0.313 0.313 0.313
0.125 0.125 0.125 0.125
0.5 0.5 0.5 0.5
6-05B
6-03
SA-6-601
6-07
6-04B
6-04A
6-01 6-02 6-02
6-05A
6-06
SECTION A-ASCALE 1 : 1.5
0.375 0.375 0.375 0.375
99°
99°
99°
99°
R0.032 R0.032 R0.032 R0.032
0.083 0.083 0.083 0.083
0.078 0.078 0.078 0.078
SA-7-702
7-04
7-03
7-02
7-02
7-02
7-02
1-347-05
SA-7-701
SA-7-701
7-06
7-01 7-07 7-077-09 7-097-10 7-107-08 7-08SA-7-701 0
.438
0.4
38
0.4
38
0.4
38
0.125 0.125 0.125 0.125
0.251 0.251 0.251 0.251 1.875 1.875 1.875 1.875
0.2
5
0.2
5
0.2
5
0.2
5
0.3
75
0.3
75
0.3
75
0.3
75
0.4
38
0.4
38
0.4
38
0.4
38
0.133 0.133 0.133 0.133
SCALE 1:1.5
0.25 0.25 0.25 0.25
0.188 0.188 0.188 0.188
0.047 0.047 0.047 0.047
0.75 0.75 0.75 0.75 0.25 0.25 0.25 0.25
0.047 0.047 0.047 0.047
0.2
5
0.2
5
0.2
5
0.2
5
SCALE 1:3
4.125 4.125 4.125 4.125
1.982 1.982 1.982 1.982
0.9
79
0.9
79
0.9
79
0.9
79
2.837
2.837
2.837
2.837
0.0
47
0.0
47
0.0
47
0.0
47 2
.938
2.9
38
2.9
38
2.9
38
SCALE 1:2.5
0.2
27
0.2
27
0.2
27
0.2
27
0.375 0.375 0.375 0.375
0.203 0.203 0.203 0.203 0.188 0.188 0.188 0.188
0.0
31
0.0
31
0.0
31
0.0
31
SOLDER
0.4
38
0.4
38
0.4
38
0.4
38
0.0
47
0.0
47
0.0
47
0.0
47
2.2
66
2.2
66
2.2
66
2.2
66
1.1
25
1.1
25
1.1
25
1.1
25
2.2
66
2.2
66
2.2
66
2.2
66
0.25 0.25 0.25 0.25
2.125 2.125 2.125 2.125
4.453 4.453 4.453 4.453
0.289 0.289 0.289 0.289
BRS
R0.25
R0.25
R0.25
R0.25
5.656 5.656 5.656 5.656
BRS
BRS
BRS
ANGLE 0.25x0.25x0.047
ANGLE 0.25x0.25x0.047
SOLDER ALL
0.047 0.047 0.047 0.047
5.6
56 I
NS
IDE
5.6
56 I
NS
IDE
5.6
56 I
NS
IDE
5.6
56 I
NS
IDE
4.453 4.453 4.453 4.453 0.391 0.391 0.391 0.391
0.0
47
0.0
47
0.0
47
0.0
47
7-127-127-11
SA-7-703
SOLDER ALL AROUND
ANGLE 0.25x0.25x0.047
0.047 THICK
SCALE 1:3
1.437 1.437 1.437 1.437
2.2
5
2.2
5
2.2
5
2.2
5
2.2
5
2.2
5
2.2
5
2.2
5
0.7
5
0.7
5
0.7
5
0.7
5
0.1
72
0.1
72
0.1
72
0.1
72
0.7
5
0.7
5
0.7
5
0.7
5
0.188 0.188 0.188 0.188
9.25 9.25 9.25 9.25
5.6
56
5.6
56
5.6
56
5.6
56
0.5 0.5 0.5 0.5 8.578 8.578 8.578 8.578
2.266 2.266 2.266 2.266
0.2
81
0.2
81
0.2
81
0.2
81
0.2
81
0.2
81
0.2
81
0.2
81 0.082-4PL 0.082-4PL 0.082-4PL 0.082-4PL
SCALE 1:3
BRS 9.063 9.063 9.063 9.063
3.5
3
.5
3.5
3
.5
R0.365
R0.365
R0.365
R0.365
0.1
72
0.1
72
0.1
72
0.1
72
0.7
5
0.7
5
0.7
5
0.7
5
SA-7-710
SA-6-605
7-15
7-13
7-147-16
7-17
SA-7-704
J.A.M. DE WAAL PAPAKURA NZ
JDWDSJDWDSJDWDSJDWDSPROJECT No 07B-10-00
CALLED "TOBY".PARTS AND ASSEMBLIES
MAY-2016
SHEET: 11 OF 14 No: TOBY-11
DATEJDW DRAUGHTING SERVICESMODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE PROJECTION
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110. NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
SA7-704
SA7-703
SA-7-710SA7-702SA7-703
SA-7-710
SA-9-901
SA-6-605
NOTESTHE FOLLOWING NOTES WERE FOUND ON THE ORIGINAL DRAWINGS OF STEVE EATON"A': INJECTOR IN, OR IF NO INJECTOR USE FOR HAND PUMP"B": BY PASS VALVE"C": WATER IN FOR FEED PUMP"D": HAND PUMP IN, IF INJECTOR IS FITTED
FOR MORE INFORMATION AND BEFORE INSTALLING THE MISSING ITEMS/PARTS IT MAY BE ADVISABLE TO CONTACT Mr. STEVE EATON
WATER SUPPLY SCHEMATIC AND PIPING
NOTE "D"
TENDER
AXLE PUMP
(SA-5-506)
BYPASS VALVE
NON-RETURN VALVE
HAND PUMP
(SA-1-109)
BOILER
CHECK VALVES (SA-4-405)
LOCOMOTIVE
INJECTOR
WATER CONTAINER
JUNCTION
NOTE "A"
NOTE "B"
NOTE "C"
ITEMS WITHIN THIS BOUNDRY ARE NOT INSALLED OR NOT CATERED FOR
WHISTLE PIPE
SUPPLY MANIFOLD (4-30)
CYLINDER
BOILER STEAM
BLOWER (SA-3-307)
SUPER HEATER PIPE (SA-4-407)
SIGHT FEED
OIL TANK
(SA-1-110)
TO CYLINDERS
MANIFOLD INLET
SPARE
ITEMS WITHIN THIS BOUNDRY ARE NOT INSALLED
NOT INSALLED
SPARE
BLOWER PIPE (5-22 + 5-23)
BOILER
PRESSURE INDICATOR
WHISTLE (SA-5-505)
(SA-3-308)
REGULATOR (SA-4-406)
ON/OFF VALVE (SA-5-504)
ITEMS WITHIN THIS BOUNDRY ARE
?
STEAM SCHEMATIC AND PIPING
J.A.M. DE WAAL PAPAKURA NZ
JDWDSJDWDSJDWDSJDWDSPROJECT No 07B-10-00
CALLED "TOBY".MODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE
SUPPLY SCHEMATICMAY-2016
SHEET: 12 OF 14 No: TOBY-12
DATEJDW DRAUGHTING SERVICESSTEAM SCHEMATIC AND WATER PROJECTION
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110. NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
J.A.M. DE WAAL PAPAKURA NZ
JDWDSJDWDSJDWDSJDWDSPROJECT No 07B-10-00
CALLED "TOBY".RENDERED MODELS
MAY-2016
SHEET: 13 OF 14 No: TOBY-13
DATEJDW DRAUGHTING SERVICESMODEL STEAM LOCOMOTIVE FOR 2.5" GAUGE PROJECTION
E-MAIL: [email protected].
MODEL SCALE: 1:1DRAWING CONTENTS
DWG SCALE: 1:1 @A3 OR AS SHOWN
TITLE
Copyright ©
A3J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110. NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
NOTES: THE ORIGINAL DESIGN AND BUILT OF THIS LOCO IS BY Mr. STEVE EATON ([email protected]) THE DRAWINGS SUPPLIED TO ME WERE DATED FROM 1999 T0 2003 (DRG-00 TO DRG-32)
