EBCL VERTICAL LATCHING SHROUDsuddendocs.samtec.com/catalog_english/ebcl.pdf · EBCL–4–10 SHOWN...
1
EBCL SERIES EBCL–4–10 EBCL–6–12 Surrounds and protects the EBTM-VT Screw mounts secure the shroud to the board (M2 thread) Provides retention for the EBCF-V to EBTM-VT Due to technical progress, all designs, specifications and components are subject to change without notice. All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. WWW.SAMTEC.COM VERTICAL LATCHING SHROUD Notes: ExaMAX ® is a registered trademark of AFCI. Some lengths, styles and options are non-standard, non-returnable. EBCL–4–10 SHOWN For complete specifications and recommended PCB layouts see www.samtec.com?EBCL Insulator Material: Nylon RoHS Compliant: Yes SPECIFICATIONS EBCL NO. OF PAIRS NO. OF COLUMNS –4 = 4 Pairs –6 = 6 Pairs APPLICATION EBCL/ EBTM-VT EBCF NO. OF PAIRS C D E –4 (26.20) 1.031 (11.45) .451 (21.50) .846 –6 (33.40) 1.315 (15.05) .593 (28.70) 1.130 (3.19) .126 (2.45) .097 DIA (27.00) 1.06 C D E B A –06, –08, –10, –12 (–6 pairs only) NO. OF COLUMNS A B –06 (22.40) .882 (18.66) .734 –08 (26.40) 1.039 (22.66) .892 –10 (30.40) 1.197 (26.66) 1.050 –12 (34.40) 1.354 (30.66) 1.207 F-219 (Rev 12FEB19)
Transcript of EBCL VERTICAL LATCHING SHROUDsuddendocs.samtec.com/catalog_english/ebcl.pdf · EBCL–4–10 SHOWN...
EBCL SERIESEBCL–4–10
EBCL–6–12
Surrounds and protects the EBTM-VT
Screw mounts secure the shroud to the board (M2 thread)
Provides retention for the EBCF-V to EBTM-VT
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
VERTICAL LATCHING SHROUD
Notes: ExaMAX® is a registered trademark of AFCI.
Some lengths, styles and options are non-standard, non-returnable.
EBCL–4–10 SHOWN
For complete specifications and recommended PCB layouts see www.samtec.com?EBCL
Insulator Material: NylonRoHS Compliant:Yes
SPECIFICATIONS
EBCL NO. OF PAIRS NO. OF COLUMNS
–4 = 4 Pairs
–6 = 6 Pairs
APPLICATION
EBCL/ EBTM-VT
EBCF
NO. OF PAIRS C D E
–4 (26.20) 1.031
(11.45) .451
(21.50) .846
–6 (33.40) 1.315
(15.05) .593
(28.70) 1.130
(3.19).126
(2.45).097DIA
(27.00)1.06
C
D
E
B
A
–06, –08, –10,
–12(–6 pairs only)
NO. OF COLUMNS A B
–06 (22.40) .882
(18.66) .734
–08 (26.40) 1.039
(22.66) .892
–10 (30.40) 1.197
(26.66) 1.050
–12 (34.40) 1.354
(30.66) 1.207
F-219 (Rev 12FEB19)
