Ebb and Flow Hydroponic System
-
Upload
nathan-larlee -
Category
Education
-
view
340 -
download
4
description
Transcript of Ebb and Flow Hydroponic System
![Page 1: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/1.jpg)
Hydroponics
Ebb&Flow growing systemBy..... Makayla, Coleman, Jared and Eric
![Page 2: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/2.jpg)
Equipment!!!
• Buying equipment, the
equipment needed was:
• 30 gallon bucket
• 15 gallon bucket
• Drain
• 1 inch PVC tube
• Clay pellets
• Water pump
• Silicone
![Page 3: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/3.jpg)
• After we got the stuff we needed, we came up with a plan on how
we wanted to construct it and how it would work.
• Building: we started off with cutting holes in the top black tub for
the drain and over flow, to fit in.
Step by step how to build!
![Page 4: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/4.jpg)
Step by step 2
• The stand: in order for the black tub to stay
up higher where it needs to be,our group
decided that we should have a stand
underneath to hold the tub up.
• Coleman built and painted a stand so it can
tolerate water.
• Putting it all together: we put the stand in
the bottom bucket and set the black top
bucket on top
• We secured the drain and the overflow
tube in the exact spot we wanted it.
• We had to wait for the silicone to dry.
• After that we had everything all set to go we
filled it with the amount of water we wanted.
![Page 5: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/5.jpg)
Step by step 3
• Trying it out: it's all put
together and ready to go.
• Using the pump we filled the
growing tub with water to see
how well the drain and over
flow tube works.
• Fixing any problems that
occurred: Patching up tubes
and cutting final lengths of
tubing
![Page 6: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/6.jpg)
Clay pellets
• We filled the black tub 3/4 of
the way full with clay pellets.
• After we added the pellets we
set the mesh pots in the top of
the clay pellets.
![Page 7: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/7.jpg)
How it works!!
• The bottom tub is filled with
water and nutrients, it fills the
top tub up for a certain
amount of time and then will
drain .
• The growing tub has clay
pellets in it and they will soak
up the water. Soaking the
plants!
![Page 8: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/8.jpg)
Diagram!!
![Page 9: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/9.jpg)
Working together!
![Page 10: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/10.jpg)
The
Final
Stages
![Page 11: Ebb and Flow Hydroponic System](https://reader034.fdocuments.net/reader034/viewer/2022042514/559835971a28abef798b4842/html5/thumbnails/11.jpg)
Starting to
sprout!