easyDATA ProfessionaleasyDATA Professional

Data Capture and Analysis

Reads data from coin mechanisms and vending machine control units

Laser scanner for inventory management Tailored to the needs of the vending industry Continuously adapted to the requirements and

specific features of leading manufacturers Infrared and IrDA standards RS232, TTL and analog interfaces all in one Internal extension slot

easyDATA Professional

easyDATA Professional

Easy to operate, evenwithout training

Absolutely safe andsecure data storage

Simple and trouble-free

Bar-code extension enablesinventory management

Easy Operation

Data export procedure:

Either:connect device

Or:Point easyDATA at the data interface and press “ON“

Red LED remains lit while data is being exported

Wait until light goes off

Done.

Special Features:

Automatic Interface Control (AIC)

Ensures data-interface compatibility with almost all devices on the market

Provides for future extensions

Adapted to state-of-the-art technologies

“Future-proof“ and expandable hardware still supports the requirements of older vending machines (not often the case with data export devices)

Bar code laser scanner available

easyDATA Professionaland Bar Codes

Supports complete inventory management

Quality laser scannerintegrated into the device, thus enabling distance readings

Exceeds the quality of conventional CCD bar code readers by far using a laser scanner

Descriptions of scanned products stocked in machines can be shown on the display

Simple and trouble-free

Bar Codes:An Efficient Concept

1. A bar code sticker showing the machine‘s unique ID is placed in each vending machine

2. The route person logs on to the vending machine

3. If necessary, data is read out from the coin mechanism (vending machine control unit)

4. Stocked products are then read

5. Problems and malfunctions can be captured if required

6. The route person then logs off the specific vending machine

Data entry errors can be reversed easily using correction bar codes

Bar Codes:An Efficient Concept

Advantages Exact entry of merchandise stocked/removed

Assignment of products to each vending machine (location)

The route driven by the route person can be traced precisely using the bar codes captured

The easyDATA clock provides easy and reliable time records.easyDATA records the exact login/logoff time at each vending machine

The time spent at each machine and travel time are thus also recorded

Recurring malfunctions can be detected easily using evaluation software

Functions & Features

Handling designed to minimize training requirements and ensure error-free operation even by untrained users

Real-time clock can not be changed by user

Integrated, high-quality bar-code laser scanner for merchandise management

Various interfaces

Crucial data is stored safely and securely in FLASH memory

Functions & FeaturesInterfaces / Protocols:

9-pin D-Sub for RS232 printer output

NRI printer emulation

NRI G26 Höfer mode using plug-in connection or IR

G46 DDCMP using plug-in connection or IR

Mars Cashflow DDCMP using plug-in connection or IR

DEX/UCS using adapter cable (IR available)

Standard infrared DDCMP (Eva-Dts, Vidts) supporting a wide variety of coin mechanisms and vending-machine control units

IRDA infrared DDCMP (Eva-Dts 5.0)

Functions & FeaturesInterfaces / Protocols:

FAGE protocol using infrared

Flexible programming of D-Sub plug, capable of simulating virtually all common interfaces

Various custom settings, e.g. export of data from Rhea vending machine control units

Transfer of completed coin settings/vending machine settings with Eva-Dts, Höfer and DEX/UCS - considerable time savings

Bar codes (laser scanner for distance readings)

Inventory management possible using bar codes

Supports Quick payment modules

Examples

Printer emulation: Mars Electronics Mars 1900, CF 560, CF 690, NRI G26 and G46, Azkoyen, Wittenborg Junior and Mariner, FAS, Wurlitzer, etc.

Höfer protocol: Vendo, AHT, NRI G26, etc.

Eva-Dts Ddcmp: Mars Electronics CF560, CF690, NRI G46, Silaff, FAS, FAGE, Vendo, Wittenborg, etc.

Dex/Ucs: Vendo, CoinCo, etc.

Eva-Dts IrDA: Rhea, FAS, etc.

Printer emulation via IrDA: Vendo BB01-4

Special protocols: Rhea XS, Sagoma, Dex via IrDA, etc.

Audit module required

Software Features Convergence of various

data formats in a standardized form

Re-conversion into Eva-Dts, thus allowing printout and Höfer to be output to Eva-Dts

Freely definable output fields

Standard import function for Excel and Access

Customer-specific adaptation possible

Inventory management possible using bar codes

Software -Special adaptations

Software can be adapted to customer‘s specific needs

Enables special merchandise management processes

Supports extensions such as GSM data transfer

Summary easyDATA Professional:

Merchandise management / Bar codes supported

Interfaces: IrDA, IR, RS232, TTL-RS232, analog interface, Automatic Interface Control (AIC)

IR (ASK 34kHz) and IrDA

TTL – RS232

Auto-detection of baud rate (110–1200 baud) for NRI

Facilitates hardware extensions

Tried and tested in the vending industry

Developed specifically for the requirements of the vending industry and continuously adapted to market-leading manufacturers and specific features

Thank you for your attention

interTronic Innovations GmbHSchiller Strasse 661

A-3571 Gars am Kamp, Austria

Sales: