Easter Bunny Mask
-
Upload
irina-gabor -
Category
Documents
-
view
4 -
download
0
description
Transcript of Easter Bunny Mask
1. Pr int on st i f f paper.2. Cut out the "ears", "bunny face" and headband for ears.3. Fold the tabs on the ears and af f ix the bottom of the ears to theheadband with tape so the ears "stand up".4. Use a paper puncher to punch holes in the ends of the headband and in the "cheeks" of the "bunny face"5. Tie the "ears" and headband to the "bunny face" using an elast ic band.
Bunny Mask and Ears
©2000 Hewlett-Packard Co. All rights reserved.
Instructions for Bunny Mask Materials
Heavy paper or card stock Tape X-ACTO knife or scissors Metal-edged ruler (optional) Cutting mat (optional) Hole punch Elastic band
Instructions Download art. Add paper to your printer. Open your print dialogue box. Set page scaling to None. Set your printer to Best quality. Print the page, and set aside to dry completely. Cut out the "ears", "bunny face" and headband for ears. Fold the tabs on the ears and affix the bottom of the ears to the headband with tape so the ears "stand up". Use a hole punch to punch holes in the ends of the headband and in the "cheeks" of the "bunny face" Tie the "ears" and headband to the "bunny face" using an elastic band. NOTE: These instructions are for HP color inkjet printers, which load from the front. If your printer loads from the back, please consult your printer’s user guide. Try printing a test page before using any specialty paper.