Eagle Trading & Agencies has been established from the ground up for selling, managing and implementing mid to large size projects in the field of fire fighting, remote terminal fire alarm control panel with advanced fire panel technology, loop fire alarm control panel, fire detectors, CCTV camera, intelligent real time digital video recording, infrared alarm transmitters, nurse call systems, access control, time attendance, intercom devices, audio video conference and sound systems. Serving both the domestic and international sectors Eagle Trading & Agencies brings a fresh and innovative approach to consulting services, acting as liaison between the client and international providers, as experts in security systems and fire alarm projects Eagle Trading & Agencies is involved in every stage from the start of the project till the final phase.

Fire Detectors

Smoke / Heat / Flame Sensors

Manual Call Points / Isolators

Alarm Devices

Alarm Transmitters

Nurse Call Systems

Staff Attack Systems

CCTV Camera

Intelligent Video Recorder

Remote Terminal Fire Alarm Control Panel

Loop Fire Alarm Control Panel

The new transmitters from SAS are now available for use with our RED ALERT staffattack system. New range of infrared alarm transmitters Although our original range of transmitters are still popular, the latest transmitters have new additional features, which are proving invaluable to our clients. One of the main innovations is the move to rechargeable batteries. There is no longer a need to stock, or worry about disposal of replacement batteries. Simply plug the transmitter into a charger for upto 11/2 hours. When fully charged, it will last for up to 12 months.

Network II nurse call was designed with both installers and end-users in mind.

This feature packed system is ideal for use by the Private Sector in care establishments and for NHS Developments; it has been developed and fine-tuned over the years to keep it at the forefront of technology.Using a simple two-wire bus, installation couldn’t be easier. Call points are wired in simple radials from the main control unit – or Hub as we call it. Indicator panels are wired on similar radials. For more detailed information refer to our installation and programming guide.

... there is no more cost effective way of upgrading a nurse call system!

A favorite, and often the specified product, with a large number of NHS Trusts, local authorities, Private Healthcare companies and many more.

Our Red Alert system has been designed to provide a total solution for our clients whilst providing ease of installation and programming for the installation company.The systems are designed to allow staff to summon assistance by activating an infrared transmitter. The alarm signal is picked up by a local infrared receiver and communicated back to LCD indicator panels and/or radio pagers that are situated in key positions throughout the building. A range of panic buttons is also available.

High Resolution 600TVLThe combination of a Sony SuperHAD CCD image sensor andSpecial DSP provides andexcellent resolution of 600TV lines

3D NOISE REDUCTION (3DNR)Newly developed 3D Noise Reduction (3DNR) embedded, it produces extremely clear picture quality, even under very low light condition

WIDE DYNAMIC RANGE (WDR)Advanced Light Level controlling technologyenables the camera to be ideally set up for the most of different levels of backlight or contrast lighting situations.

Based around two core products, the Mx- 4010 Remote Display Terminal ) and the fully functional Mx-4020 Remote Control Terminal .Both remote terminals utilize the same graphical LCD user interface that can be found on the Mx-4000 series fire panelsand are based upon the same advanced, flash based, microprocessor technology.All Mx-4000 series panels and remote terminals can communicate over the same 2-core network cable. Integral network interface incorporating a special screen termination to prevent mainsfrequency earth-loop currents flowing between network nodes.The 'Ad-NeT' network operates as a true peer-to-peer system with full cross panel reporting, control and cause and effectfunctionality of up to 1000 zones.

The Mx-4400 series is fully expandable from 1 to 4 loops complete with 4 on-board soundercircuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flashbased microprocessor technology driven by a 5 Amp power supply and charger approved to EN54 parts 2 & 4.

Dedicated system navigation keys makes learning this control panel user friendly as well as installer friendly due to the uncomplicated, trouble free,commissioning and fault finding.

Powerful Cause and Effect programming coupled with 'DynamiX‘ zoning makes the panel suitable for a wide range of site applications, fromsmall to large complex multi area systems. Fully on site programmable via on board alphanumeric keypad or PC -NeT Configuration tools.