YOUR GUIDE TO LEDs & LED LIGHTING SOLUTIONSAll the resources you need to bring your designs to life

2FLOOD LIGHT 3

HIGH BAY LED LIGHTING 5

CONTENTS

Presenting over 10,000 products, our LED and LED Lighting product portfolio includes the latest LEDs and related components required for the design of a wide range of LED and LED Lighting related applications.

Our portfolio offers a broad range of LED product solutions from leading manufacturers, including High Power LEDs, LED Modules, Standard LEDs and Indicators, LED Replacement Lamps, LED Power supplies and LED drivers as well as Thermal Management, Optical, Control and LED Interconnect products. Our featured solutions, design resources and product training videos are developed to help you with the design and implementation of new applications using LEDs, while simultaneously keeping you up to date with the latest innovations that open up new applications for LEDs and LED Lighting.

There are many viable reasons for considering an LED solution in your new designs, especially those with requirements of low power consumption, long life, lower total cost of ownership and environmental benefits as these are just some of the many benefits that Light Emitting Diodes can bring.

As LED technology continues to improve, the ability to generate more light at a lower cost has meant new applications for LEDs have become viable. These include the use of LEDs in General Lighting, such as LED Replacement Lamps, and LED fix-tures, examples of which can be seen in LED street and wide area lighting, Residential, Off Grid, Architectural and Retail and Display.

Our product offering cover the required components required for these applications in addition to more traditional applications using LEDs such as those found in Signage and Displays, Signalling and Transportation. Whatever your LED and LED Lighting component requirements, we have the products and resources you need online and available now!

LEDs & LED LIGHTING SOLUTIONS

7LED DOWNLIGHTS

10LED STREET LIGHTING

12SOLAR POWERED LED SIGNALS

14LED TRAFFIC SIGNALS

FLOOD LIGHT

Lighting designers are always challenged in achieving their goals at a faster rate in terms of efficiency and reliability in todays lighting designs. Todays Lighting designs require not only controlling the power stage, but regulating LED currents as well. Thus eliminating the need for multiple components and reducing the system cost.

The illustrated system can be designed to accurately control voltage and current regulation for precise light intensity and color mixing, temperature monitoring to prevent thermal runaway and intelligent/adaptive dimming. [+MORE]

Click here to view all recommended products for this featured solution

Cree XLamp XM-L LED Kit Cree Xlamp XM-L LED kit is the industrys highest performing, single die white lighting-class LED which delivers 1000 lumens with 100 lumens per Watt efficacy, and ideal for lighting applications where high light output and maximum efficacy are required, such as outdoor, high and low bay, stadium lighting and high end portable lighting. Learn more...

Order code: 2059066

Multiple String LED Driver with Universal Line Input and PFC Evaluation Module An 110-W offline AC-to-DC LED current driver with power factor correction which utilizes a three stage approach with a universal input boost PFC stage, a low-side buck stage providing a controlled current source and a half-bridge DC transformer stage to provide isolation to four LED strings. Learn more...

Order code: 1824823

LM3409HV LED Driver Evaluation Board This evaluation board showcases all features of the LM3409HV including analog dimming using the IADJ pin and internal PWM dimming using the EN pin. High frequency external parallel FET shunt PWM dimming can also be evaluated. The board has a header (J1) with a removable jumper, which is used to select the PWM dimming method. Learn more...

Order code: 1788083 3

Featured Products / Development Kits

Back to Contents

Piccolo Microcontrollers F2803x The F2803x Piccolo family of microcontrollers can be used to measure ambient light, motion, temperature, power consumption as alternative to separate sensors. The F2803x Piccolo family of microcontrollers provides the power of the C28x core and Control Law Accelerator (CLA) coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, as well as providing a high level of analog integration. Learn more...

Order code: 1801131, 1801133, 1800927

LM3409 PFET Buck Controller for High Power LED Drivers The LM3409 is a P-channel MosFET (PFET) controller for step-down (buck) current regulator. It offers wide input voltage range, high-side differential current sense with low adjustable threshold voltage and fast output enable/disable function and a thermally enhanced eMSOP-10 package. These features combine to make the LM3409 family of devices ideal for use as constant current sources for driving LEDs where forward currents up to 5A are easily achievable. Learn more...

Order code: 1778581, 1778582, 1735796, 1735797, 1822983, 1822984

LM3450A LED Drivers with Active Power Factor Correction and Phase Dimming Decoder The LM3450/50A is a power factor controller (PFC) with separate phase dimming decoder. The PFC regulates the output voltage while maintaining excellent power factor. The phase dimming decoder interprets the phase angle and remaps it to a 500Hz PWM output. This device is ideal for implementing a dimmable off-line LED driver for 10-100W loads. Learn more...

Order code: 1859819

PFET Buck Controller for High Power LED Drivers The LM3409HV is a P-channel MosFET (PFET) controllers for step-down (buck) current regulators which offer wide input voltage range, high-side differential current sense with low adjustable threshold voltage and fast output enable/disable function in a thermally enhanced eMSOP-10 package. These features combine to make the LM3409 family of devices ideal for use as constant current sources for driving LEDs where forward currents up to 5A are easily achievable. Learn more...

Order code: 1778581

6-Channel Current Regulator for LED Backlight Application The LM3432 is a 6-channel high voltage current regulator which provide a simple solution for LED backlight applications. This IC can communicate with a LM3430 boost regulator to adjust the LED supply voltage to the lowest level needed to keep the string current in regulation, yielding optimal overall system efficiency. Learn more...

Order code: 1364447

Cree XLamp XM-L LEDs The XLamp XM-L LED is the industrys highest performance, single-die white lighting-class LED. XLamp XM-L is 20% more efficient than XLamp XP-G at the same current, and can deliver 1000 lumens with 100 lumens per Watt efficacy. The XLamp XM-L LED offers Crees industry-leading features: wide viewing angle, symmetrical package, unlimited floor life and electrically neutral thermal path. Learn more...

Order code: 1892498 - 1892513

4

MSP430 USB Stick F2012 Board This versatile MSP430 Experimenter Board features a MSP430F2013 and a MSP430FG4618 and is compatible with TIs wireless evaluation modules. Two JTAG headers are accessible to program and debug each MSP430 individually and allows for communication to external devices or between the two MSP430s. Learn more...

Order code: 1637362

Wide Input Range Non-synchronous Voltage Mode Controller The TPS40200 is a flexible non-synchronous controller with a built in 200-mA driver for P-channel FETs. The circuit operates with inputs up to 52 V with a power-saving feature that turns off driver current once the external FET has been fully turned on. This feature extends the flexibility of the device, allowing it to operate with an input voltage up to 52 V without dissipating excessive power. Learn more...

Order code: 1511847, 1365103

MSP430 16-Bit Ultra-Low-Power Microcontroller The MSP430 family of ultralow-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. Learn more...

Order code: 1753283, 1649414, 1537186, 1753284, 1753285, 1753286, 1649415, 1470491, 1846574

HIGH BAY LED LIGHTING

By combining LED lighting with low power wireless technology such as ZigBee, significant savings can be made on the control circuitry, especially in larger buildings where the control cable would otherwise need to be long enough to reach the operator. The energy efficiency and life span of LED fixtures also makes them an obvious candidate for a high bay lighting solution, where maintenance and repairs to installations of conventional lighting would otherwise require the workforce to be carrying out work at height on a regular basis. [+MORE]

Click here to view all recommended products for this featured solution

5

Featured Products / Development Kits

Back to Contents

6AC-DC LED Driver AC-DC LED Driver with constant voltage and current operation, high power factor, high efficiency and waterproof to IP67. Learn more...

Order code: 1961522, 1961523, 1961525

Resonant-Switching Driver Controller for LED Lighting The TPS92020 is a high-performance resonant-switching LED driver controller. It is designed for use in higher power LED lighting systems. The TPS92020 uses resonant switching in an LLC topology to achieve a very high efficiency compared to traditional half-bridge converters. Learn more...

Order code: 1855135

Digital LED Lighting Development Kit Microchips Digital LED Lighting Development Kit enables designers to quickly leverage the capabilities and performance of the dsPIC33 GS series of Digital Signal Controllers (DSCs), to develop LED lighting products. The dsPIC33 GS DSC and this reference design allow developers to create a 100% digitally controlled ballast function, while including advanced features such as dimming and color hue control. The dsPIC33 GS DSCs can support an entire system implementation for LED lighting products, including power-conversion circuits, such as AC-to-DC and DC-to-DC conversion, along with functions such as Power Factor Correction (PFC), which are necessary for a complete product and lower the overall system cost. Learn more...

Order code: 1924789

Flexi-MateTM 3.70mm (.146) Pitch Board-to-Board Connector System Designed to meet the backlighting needs of LED TVs and room lighting applications, Molexs new Flexi-MateTM family of connectors is the first of its kind on the market to provide a full range of both board-to-board and wire-to-board solutions.

The board-to-board connectors are used to snap together small panels containing LED lights. The system also includes a wire-to-board option to connect the LED boards to the main power board; a terminating connector is also available that is used as a type of shorting device to complete anopen-loop signal. Learn more...

Order code: 1848358, 1848359, 1848361

LED Star Board The LZP-HOCWT1, MCPCB with three 2-pin poke-home connectors provides a convenient method to connect LED Engins LZP emitters. One 2 pin poke-home connector supports 4 parallel strings of 6 die in series; a second one is for connecting to the thermistor, and a third one is available for an optional center die for custom emitters. Four recessed features allow the use of M3 or #4-40 screws to mount the MCPCB to a heat sink. There are additional mounting holes for the complementary TIR lenses and Zener diodes for enhanced ESD protection. Learn more...

Order code: 2081178

High Efficiency Lens with 32 Flood Beam for 90W Watt Emitters with Holder This 32 beam lens combined with LedEngin LZP-series 90W single color emitters provides an efficient and highly uniform smooth light gradient for illumination applications. The unique design provides users with maximum luminous output and excellent beam uniformity. Learn more...

Order code: 1901525

Bridgelux RS Array The Bridgelux RS Array Series has been specified to enable lamp and luminaire designs with comparable performance to existing high wattage CFL and HID conventional light sources for retail, commercial, industrial and outdoor/street lighting applications. Bridgelux Arrays are extremely well equipped for all types of light-on-demand applications, where they can be instantaneously and smoothly dimmed up or down without any effect on lifetime, unlike traditional CFL and HID light sources. Learn more...

Order code: 2071109, 2071115, 2071119, 2071123, 2071120, 2071124, 2070605, 2070606, 2070604, 1818062, 1876126, 1876125, 1876130, 1876129, 1876128

LUXEON S Emitters The LUXEON S emitters deliver uniform beam intensity and high flux density from a uniform source. This enables tight beam control at the system level using secondary optics to provide the high center beam intensity, uniform beam and crisp, single shadow required for high performance accent spotlighting applications. LUXEON S delivers tight Correlated Color Temperature control to ensure consistency in system color point. In addition these parts deliver the efficacy, lifetime and reliability that all LUXEON LEDs are renowned for. Learn more...

Order code: 2062946

LED DOWNLIGHTS

7

LED downlight and LED spotlight adoption represents a key goal for the LED lighting industry. By providing a solderless interconnection hub TE Connectivity have enabled easy installation of Bridgelux RS and Lumileds Luxeon S LEDs, allowing attachment to a heat sink or PCB using standard M3 screws. On the block diagram below you can find associated products to provide a complete installation solution for a LED downlight system using Bridgelux RS or Lumileds Luxeon S LEDs, allowing you to produce cost-effective LED downlights. [+MORE]

Featured Products / Development Kits

Click here to view all recommended products for this featured solution

Back to Contents

8Solderless LED Socket, Type LS The TE Solderless LED Socket, type LS features easy, snap-together tool-less insulation displacement termination to the customers commonly available 24awg wire. Termination to the LUXEON S LED is simplified by the use of an easily applied locator frame that pre-positions the LED on a customers heatsink prior to final connectorization using the socket. The TE solderless LED socket, type LS eliminates the need to design, manufacture and integrate a complex metal clad circuit board (MCPCB) assembly into the lighting fixture. This frees the lighting fixture designer to move beyond the limitations inherent in a planar MCPCB LED assemblies. The ability to easily place an LED anywhere in a fixture using simple hand tools provides the fixture designer with a broad range of novel integration possibilities. Learn more...

Order code: 2101794

Solderless LED Socket, Type BR The TE Solderless LED Socket, Type BR is a quick termination connector system for use with the Bridgelux RS LED. The one piece connector assembly features the TE poke-in wire termination to wire types ranging from 18 - 22 AWG wire. Termination to the Bridgelux RS LED is simplified with locating features that properly position the LED into the socket prior to mounting the full assembly onto the heat sink with four screws. To further enhance integration capabilities, the socket is designed to accept the commercially available LEDIL Britney Series Optics. Alternatively, ample space is available to allow for the use of other custom optical solutions. Learn more...

Order code: 2029440

Britney reflectors for Bridgelux LEDs The Britney reflectors are specially designed for Bridgelux BXRA-C4500 and W3000 series of LEDs. They are easy to assemble to the PCB accurately and the reflectors are shipped with a PU foam adhesive tape of automotive grade attached for easy mounting.

The reflector is made of optical grade metal material and protective lacquer coated which allows the reflector to be used high current and temperature condition. Learn more...

Order code: 1848321

X100 W AC-DC LED Driver This high power factor AC Input LED Driver delivers constant voltage and current with high efficiency and is certified with IP67 rating. Learn more...

Order code: 1961519

Sil-Pad A1500 Bergquist Sil-Pad A1500 is a silicone-based, thermally conductive and electrically insulating material. It consists of a cured silicone elastomeric compound coated on both sides of a fiberglass reinforcement layer.

Sil-Pad A1500 performs well under clamping pressure up to 200 psi and is an excellent choice for high performance applications requiring electrical isolation and cut-through resistance. Learn more...

Order code: 8783667

3M Thermally Conductive Adhesive Transfer Tapes 3M Thermally Conductive Adhesive Transfer tapes are tacky pressure sensitive adhesives loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of tapes 8805, 8810, 8815 and 8820 renders them modestly soft and able to wet to many surfaces, allowing them to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface. Learn more...

Order code: 2065878

element14 carries the widest selection of Development Kits from the top suppliers in both Analog and Embedded design. Check out the exclusive full-featured Development Kits from element14.

DEVELOPMENT

KITSVisit the site: sg.element14.com/devkits

Order code: 2148863

LPC4357 MULTIMEDIA EVALUATION BOARD

Order code: 2124398

i.MX6Q SABRE LITE BOARD

FREESCALE FREEDOM PLATFORM

Order code: 2191861

LED STREET LIGHTING

As the next generation of lighting source, high power LEDs have a number of advantages such as power saving, efficiency and cold start. They are environment friendly and have a long life which reduces the cost of maintenance. It is reported in research that an LED lamp of 100W or so can reach the lighting intensity of a 250W high voltage sodium lamp, presenting significant power efficiency. LEDs require low voltage DC supply, and therefore AC/DC conversion is necessary if they are powered by AC mains. [+MORE]

10

Click here to view all recommended products for this featured solution

1.9A Single Phase Rectifier Bridge A 1.9A single phase diode brodge rectifier assembly consisting of four silicon junction diodes in a plastic encapsulation, intended for general applications in industrial and consumer equipment. Learn more...

Order code: 9098291, 9098313, 9098321, 9098330, 9098348, 9098364, 9098380, 9098690

Advanced High-Power Factor Preregulator The UC3854A/B products are pin compatible enhanced versions of the UC3854. Like the UC3854, these products provide all of the functions necessary for active power factor corrected preregulators. The controller achieves near unity power factor by shaping the AC input line current waveform to correspond to the AC input line voltage. Learn more...

Order code: 1101442, 1262773, 1207391, 1207392, 1101414

Featured Products / Development Kits

Back to Contents

11

High Performance Current Mode Controllers The UC3844B, UC3845B series are high performance fixed frequency current mode controllers. They are specifically designed for Off-Line and DC-DC converter applications offering the designer a cost-effective solution with minimal external components. These integrated circuitsfeature an oscillator, a temperature compensated reference, high gain error amplifier, current sensing comparator, and a high current totem pole output ideally suited for driving a power MOSFET. Learn more...

Order code: 1211129, 1228725, 1652439, 2112629, 1350525, 1364584, 1311732, 1705923

White LED Driver and Boost Converter LT3466-1 is a dual switching regulator that combines a white LED driver and a boost converter in a low profile, small footprint (3mm 3mm 0.75mm) DFN package. The LED driver can be configured to drive up to 10 White LEDs in series and the boost converter can be used for generating the LCD bias voltages or driving a secondary OLED display. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors and expensive factory calibration. Learn more...

Order code: 1866351

Cree XLamp XP-G LEDs The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Crees history of innovation in LEDs for lighting applications with wide viewing angle, symmetrical package, unlimited floor life and electrically neutral thermal path.

XLamp XP-G LEDs are the ideal choice for lighting applications where high light output and maximum efficacy are required, such as LED light bulbs, outdoor lighting, portable lighting, indoor lighting and solar-powered lighting. Learn more...

Order code: 2062959, 2062960, 1846650, 1846651, 2067489, 2067490, 2067491

Inverted SMT Thru Board Connector The Inverted SMT Thru Board Connector provides a means to bring power to LED aluminum clad and FR4 boards from the underside of the pc board. It is available in 2,3,4,5 and 6 positions, and eliminates wire dress management issues with discreet wire leads around the surface of the LED pc board. Surface mount hold downs provide stability during mating and unmating for applications such as LED lighting controls, Indoor and outdoor lighting fixtures, General LED illumination fixtures etc. Learn more...

Order code: 1761505 - 1761508

IDC SSL Connector The IDC SSL connector series are insulation displacement (IDC) SMT and thru-hole wire-to-board connectors designed for quick, tool-less termination of discrete wires onto LED printed circuit boards. These connectors use TE Connectivity (TE) proven insulation displacement technology to provide a robust, stable electrical and mechanical power connection to single or multiple printed circuit boards in solid state lighting and non-lighting applications. Learn more...

Order code: 1800445, 1800465, 1781828, 1781831, 1619050, 1638938

AC-DC LED Driver AC-DC LED Driver with 0.99 power factor, 90-93% efficiency, tiny inrush current (1A-2A), Surge, Over-temperature and Short-circuit protections for applications such as under-cabinet LED lighting, cove LED lighting, daisy-chained LED installations, hi-power LED lighting LED Signage etc. Learn more...

Order code: 1888142

SOLAR POWERED LED SIGNALS

Solar powered LED signals have the capability of getting power from sunlight, which makes them suited for the signals in the places where power lines are not available but traffic condition need to be controlled.

Solar powered signals have solar panel installed in their power supply systems and store the unused power in batteries as the backup power supply. These LED signals usually include high brightness LEDs of three individual colors - red, yellow and green. [+MORE]

12

Click here to view all recommended products for this featured solution

DEMO9S08LL16 Board DEMO9S08LL16 is a cost-effective board targeting quick microcontroller evaluation. The MC9S08LL16 device is Freescales lowest power microcontroller with an integrated liquid crystal display (LCD) driver. DEMO9S08LL16 contains an on-board display that allows developers to explore software development using the integrated LCD driver. Learn more...

Order code: 1835143

MC9S08LL16/8 Microcontrollers The MC9S08LL16/8 helps design engineers reach their target performance levels while minimizing power consumption in their design, demonstrating extreme energy efficiency for ultra-long operation in battery-powered applications. The S08LL16 (LL16) microcontroller offers two ultra-low-power stop modes, new low-power run and wait modes, six microsecond wake-up time, ultra-low-power external oscillator and clock gating registers to disable clocks to unused peripherals. Learn more...

Order code: 1748991, 1838471

Featured Products / Development Kits

Back to Contents

13

CodeWarrior IDE Development Suite CodeWarrior is a multi-host, multi-language, multi-target GUI interface integrated development environment (IDE), providing software solutions for Freescales microcontrollers and digital signal processors and controllers. In addition, CodeWarrior tools support software development tools for Freescale embedded solutions. Learn more...

Order code: 1788133

High Current LED Driver This device is designed to replace discrete solutions for driving LEDs in low voltage AC-DC applications 5.0 V, 12 V or 24 V. An external resistor allows the circuit designer to set the drive current for different LED arrays. This discrete integration technology eliminates individual components by combining them into a single package, which results in a significant reduction of both system cost and board space. The device is a small surface mount package (SO-8). Learn more...

Order code: 1547147

CSLA Series Linear Current Sensor CSLA series linear current sensors incorporate our 91SS12-2 and SS94A1 linear output Hall effect transducter (LOHET). The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch long 4-40 screw and square nut (not provided) inserted in the housing or a 6-20 self-tapping screw. The combination of the sensor, flux collector, and housing comprises the holder assembly. These sensors are ratiometric. Learn more...

Order code: 1796881, 1082269, 1703967, 1703966, 1384220, 1384847, 1370217, 1653524

High-Speed Power MOSFET Driver MCP1415/16 devices are high-speed MOSFET drivers that are capable of providing 1.5A of peak current. The inverting or non-inverting single channel output is directly controlled from either TTL or CMOS (3V to 18V) logic. These devices also feature low shoot-through current, matched rise and fall time, and short propagation delays which make them ideal for high switching frequency applications. Learn more...

Order code: 1630422, 1630421

Dual-Channel Digital Isolator The ADuM1200-EP is a dual-channel, digital isolator based on the Analog Devices, Inc., iCoupler technology. Combining high speed CMOS and monolithic transformer technologies, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocouplers. Learn more...

Order code: 1078204, 1078205, 1078206

RS-485/RS-422 Transceivers The MAX13080E-MAX13089E +5.0V, 15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic high if all transmitters on a terminated bus are disabled (high impedance). The MAX13080E family include a hotswap capability to eliminate false transitions on the bus during power-up or hot insertion. Learn more...

Order code: 1593305, 1593306, 2085107

LED TRAFFIC SIGNALS

LEDs have already replaced traditional incandescent lamps in traffic signal applications for their high efficiency, low power consumption and long life. LED Traffic Signals use both high brightness and high power LEDs connected in a combination of series and parallel to build a LED cluster. To realize specific luminous distribution intensity, an additional optical design (lenses) is necessary. If traffic signals are driven by AC power, an AC-DC circuit is required to convert AC to DC power that is suited for LED driver to drive LED cluster/string. MCU is used to implement the control over LED driver so as to give correct traffic signals. [+MORE]

14

Click here to view all recommended products for this featured solution

Arduino Uno The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Learn more...

Order code: 1848687

Atmel ATmega328 Microcontroller The ATmega328 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega48A/PA/88A/PA/168A/PA/328/P achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. Learn more...

Order code: 2066293, 2066295

Featured Products / Development Kits

Back to Contents

15

High Performance Resonant Mode Controller with High and Low Side Drivers The NCP1396 A/B offer everything needed to build a reliable and rugged resonant mode power supply. Its unique architecture includes a 500 kHz Voltage Controlled Oscillator whose control mode brings flexibility when an ORing function is a necessity, e.g. in multiple feedback paths implementations. Thanks to its proprietary high-voltage technology, the controller welcomes a bootstrapped MOSFET driver for half-bridge applications accepting bulk voltages up to 600 V. Protections featuring various reaction times, e.g. immediate shutdown or timer-based event, brown-out, broken opto-coupler detection etc., contribute to a safer converter design, without engendering additional circuitry complexity. An adjustable deadtime also helps lowering the shoot-through current contribution as the switching frequency increases. Learn more...

Order code: 1547111, 1547113

Glass Passivated Single-Phase Bridge Rectifier Glass Passivated Single-Phase Bridge Rectifier with high surge current capability and high case dielectric strength of 1500 VRMS which is ideal for printed circuit boards for general purpose use in AC-to-DC bridge full wave rectification for monitor, TV, printer, switching mode power supply, adapter, audio equipment, and home appliances application. Learn more...

Order code: 9549439, 9549447, 1021745, 9549455, 9549463

STripFET Power MOSFET This Power MOSFET is the second generation of STMicroelectronics unique single feature size strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Learn more...

Order code: 9512608RL, 9512608

Pulse Transformers The 1000 series are intended for wideband and pulse operations. They are also suitable for signal isolation and use in small isolated power supplies. The compact footprint makes them ideal for applications where space is at a premium. Learn more...

Order code: 1087805, 1087806

LM3401 Hysteretic PFET Controller for High Power LED Drive The LM3401 is a switching controller designed to provide constant current to high power LEDs. The LM3401 drives an external P-MOSFET switch for step-down (Buck) regulators. The LM3401 delivers constant current within 6% accuracy to a wide variety and number of series connected LEDs. Output current is adjusted with an external current sensing resistor to drive high power LEDs in excess of 1A.

For improved accuracy and efficiency, the LM3401 features dual-side hysteresis, very low reference voltage, and short propagation delay. A cycle by cycle current limit provides protection against over current and short circuit failures. Additional features include adjustable hysteresis and a CMOS compatible input pin for PWM dimming. Learn more...

Order code: 1495068

Quadruple Differential Line Driver The AM26C31 is a differential line driver with complementary outputs, designed to meet the requirements of TIA/EIA-422-B and ITU (formerly CCITT). The 3-state outputs have high-current capability for driving balanced lines, such as twisted-pair or parallel-wire transmission lines, and they provide the high-impedance state in the power-off condition. The enable functions are common to all four drivers and offer the choice of an active-high (G) or active-low (G) enable input. BiCMOS circuitry reduces power consumption without sacrificing speed. Learn more...

Order code: 4975637, 1648733, 9121129

Provides engineers with a comprehensive destination for LEDs and LED lighting applications

The latest and greatest LEDs and LED lighting related products

Featured application solutions and design resources

LED AND LED LIGHTING PRODUCTS OFFERING:LEDs:HighPower/HighBrightnessLEDs,

Standard LED, LED Modules and Arrays and LED replacement Lamps

PowerManagement:ICLEDDriversandModular Power Supplies

Optics:LEDsLens,ReflectorsInterconnect:LEDConnectorsandcable

assembliesControl:MicrocontrollersandSensorsThermalManagement:Heatsinks,

Interface material, Joint compoundsLEDDriverEvaluationandLighting

development Kits

DESIGN RESOURCES AND PRODUCT TRAININGAccess to white papers, design tools and featured product training

FEATURED LED LIGHTING PRODUCTSThe latest LED Lighting products from a global portfolio of leading manufacturers

FEATURED APPLICATION SOLUTIONSStreet lighting, MR16s, Solar Power signals,RGBcolourmixing,Signalling,more to come!

Visitthesitetoday:

sg.element14.com/lightingsolutions

YOUR COMPREHENSIVE DESTINATION FOR LEDs AND COMPONENTS