e NEPLAN Maintenance Descr (1)

8/13/2019 e NEPLAN Maintenance Descr (1)

1/9


2/9

Overview NEPLAN-Maintenance Module

NEPLAN-Maintenance Software

The NEPLAN-Maintenanceassessment sheet editor allows theuser to freely configure any

assessment sheets withhis own criterions.


3/9

Component Assessment in NEPLAN-Maintenance

The picture below shows on the left side the assessment sheet of the currentcomponent. The diagram shows all conditions (y-axes) and all importances (x-axes)of all components (in this case circuit breakers). The actual circuit breaker to assessis colored differently. The user can define any filter to reduce the amount of displayedcomponents.

The condition of each component can easily be assessed with the freely configurable

assessment sheets.


4/9

Budgeting Evaluation Tool in NEPLAN-Maintenance

In NEPLAN-Maintenance a budgeting tool is included, which allows evaluating thecosts of the different maintenance strategies:

o TBM Estimation (estimated time based maintenance)

o TBM (time based maintenance)

o CBM (condition based maintenance)

o RCM (reliability based maintenance)

At your fingertips: budgeting of RCM and TBM can be easily compared


5/9

Chart Evaluation Tool in NEPLAN-Maintenance

The integrated chart manager shows for example the influence of each criterion to

the overall conditions of all components. Each criterion can be assigned to a cluster(e.g. operating condition, component type, etc.). NEPLAN allows evaluating theoverall conditions according to these clusters.

This chart shows the influence ofdifferent clusters to the overallconditions of all components.It shows for example the effectof all criterions which belong tothe Operating Conditions clustercompared to the other effectsof the other clusters.


6/9

Integration with NEPLAN-Reliability Module

The NEPLAN-Maintenance module can make use of the calculated results of ourfamous NEPLAN-Reliability module. The NEPLAN-Maintenance module integratessmoothly to the NEPLAN single line diagram. The conditions C, importance I and thedistances D (function of condition and importance, D = f(C, I)) can be displayed onthe single line diagram. The coloring according to C, I and D shows very quicklywhich components must be replaced or maintained first.

The NEPLAN-Maintenance module is at the moment the only RCM module on

the market, which integrates, with a robust network reliability module.

Integration of the NEPLAN-Reliability module with the NEPLAN-Maintenance module


7/9

Display of the maintenance and reliability results in the single line diagram

Result displayedat the circuit breakers

The results from the reliability calculation are combined with the condition evaluationof the maintenance module and displayed in the NEPLAN single line diagram. Thecoloring shows which equipment have to be replaced or maintained or just observed.

RUR_C3I=0.360C=33.0D=23.6

Itot=0.360

RUR_C4

I=0.360C=36.0D=25.7

Itot=0.360

RUR_C6I=0.376C=39.0D=27.8

Itot=0.376

RUR_C8I=0.376C=42.0D=30.0

Itot=0.376

RUR_C5

I=0.360C=60.0D=42.7

Itot=0.360

RUR_L1I=42.534C=63.0D=74.6

Itot=42.534

MVRUR1_AI=0.316

C=52.1D=37.1

Itot=0.239

MVRUR1_LT=3.991 h

Pr=18.712 min/yrW=0.153 MWh/yrC=811.135 /yr

MVRUR2_AI=0.316

C=33.7D=24.1Itot=0.239

MVRUR2_LT=3.991 h

Pr=18.712 min/yrW=0.153 MWh/yrC=811.135 /yr MVRUR3_A

I=0.187

C=44.4D=31.6

Itot=0.142

MVRUR3_LT=3.986 h

Pr=18.685 min/yr

W=0.076 MWh/yrC=403.811 /yr

MVRUR4_AI=0.474

C=50.5D=36.1

Itot=0.360

MVRUR4_L

T=1.395 hPr=49.590 min/yrW=0.247 MWh/yrC=2032.542 /yrMVRUR5_A

I=0.318C=48.7D=34.7

Itot=0.241MVRUR5_L

T=1.395 hPr=49.564 min/yrW=0.405 MWh/yrC=3331.212 /yr

MVRUR6_LT=6.786 h

Pr=241.163 min/yrW=0.985 MWh/yrC=7353.095 /yr

DORF-LS1I=0.357

C=66.0D=46.9

Itot=0.001

DORF-LS2I=0.371

C=11.0D=8.0

Itot=0.001

DORF-LS3I=1.627C=5.0D=4.7

Itot=0.006

DORF-LS4I=1.695C=14.0D=11.1

Itot=0.006

DORF-LS1I=0.357C=66.0D=46.9

Itot=0.001

DORF-LS2I=0.371C=11.0D=8.0

Itot=0.001

DORF-LS3I=1.627C=5.0

D=4.7Itot=0.006

DORF-LS4I=1.695C=14.0

D=11.1Itot=0.006

RCM Condition C

x >= 0.00000.0000

x >= 40.0040.00

x >= 60.0060.00


8/9

Display of the maintenance and reliability results in table form

The results from the reliability calculation are combined with the condition evaluationof the maintenance module and displayed in the NEPLAN table, which can also bepasted into MS-Excel.


9/9

More Information

More information can be found here:

NEPLAN:www.neplan.com

NEPLAN Brochure:http://www.neplan.ch/downloads/public/NeplanElectricity.pdf

Maintenance strategies:www.neplan.ch/downloads/public/NEPLAN-Maintenance-Strategies_e.pdf

Reliability:http://www.neplan.ch/sites/en/neplan_elec_calcmod_reliability_analysis.asp

Contact

If you have any further questions please feel free to contact us:

Giatgen CottBCP Busarello + Cott + Partner AGBahnhofstr. 408703 Erlenbach (Switzerland)

[email protected]

e NEPLAN Maintenance Descr (1)

Documents

Transcript of e NEPLAN Maintenance Descr (1)