e-mail: magnum@magnum-metal
Transcript of e-mail: magnum@magnum-metal
Magnum-Metal Sp. z o.o.ul. Ceramiczna 298-220 Zduńska WolaPolandtel. +48 43 823 51 27fax +48 43 823 23 16e-mail: [email protected]://www.magnum-metal.pl/
Features:
• compact machine - requires minimum of space
• cutting, punching and creasing in one cycle
• bottom and top pocket electronically adjustable
• excellent cost performance ratio
• the machine can be set up for 89 and 127 mm fabric
• easy to change set up between sizes, thumb screw adjustment
• programmable for window fi t, vane size, swatches and sloped blinds
• vanes collected on a hanger peg
• easy to operate and maintain
• pro� esional technical support, spare parts and training
The AVC-3 is an easy to use, compact and automatic machine for cost ef-fective production of vertical fabric vanes.
Cutting, punching and creasing is done in one cycle, minimising waste, reducing the cost of labour and re-quired skill level.
It o� ers quick change between widths and accurate fabric measure-ment.
The AVC-3 comes as a part of a com-prehensive range of proven Magnum machinery. For years we are helping you increasing the range, capacity and e� ciency of your production.
CUT, PUNCH AND CREASE FOR EASY AND SIMPLE PRODUCTION
Standard blind - 20 vanes production time - 130 s
1500 mm
1000 mm
Sloped blind - 10 vanes production time - 70 s
1500 mm
Curved blind - 10 vanes production time - 65 s
Technical specifi cation:
Max. vane length: 10 mTop pocket range: 5 - 100 mmBottom pocket range: 16 - 100 mmO� set adjustment: 0 - 100 mmFabric feeding speed: 0,6 m/s
Overall size:Height: 1840 mm Width: 610 mm Depth: 500 mm
Current: single phase 230 V (50/60 Hz)Pneumatic equipment included: approx. 6 bar at 150 L / min.