有機強誘電体薄膜による 圧電型振動発電の開発 - JST...P(VDF/TrFE) 電極 電極 P(VDF/TrFE) 電極 V 共振周波数は積層後も低い値を維持 圧電体1層:24.6
電極加工機 - 三菱電機 Mitsubishi Electric...電極加工機 Electrode machining Mitsubishi...
Transcript of 電極加工機 - 三菱電機 Mitsubishi Electric...電極加工機 Electrode machining Mitsubishi...
電極加工機Electrode machining
Mitsubishi Electric Corporation Nagoya Works is a factory certified for ISO14001(standards for environmental management systems) and ISO9001(standards for quality assurance managememt systems)
EC97J1113
省スペース、高速、高精度加工機
Space saving, Highspeed, High accuracy Machining
電極加工機
MME22015-C(0904)MDOC この印刷物は、2009年4月の発行です。なお、お断りなしに仕様を変更することがありますのでご了承ください。 2009年4月作成
〒100-8310 東京都千代田区丸の内2-7-3(東京ビル)
お問合せは下記へ本社産業メカトロニクス営業部…〒336-0027 さいたま市南区沼影1-18-6(三菱電機メカトロソリューションセンター)北海道支社…………………〒060-8693 札幌市中央区北二条西4-1(北海道ビル)東北支社……………………〒980-0011 仙台市青葉区上杉1-17-7(仙台上杉ビル)関越支社……………………〒330-6034 さいたま市中央区新都心11番地2(明治安田生命さいたま新都心ビル)
新潟支店……………………〒950-8504 新潟市中央区東大通2-4-10(日本生命ビル)
北陸支社……………………〒920-0031 金沢市広岡3-1-1(金沢パークビル4F) 中部支社……………………〒450-8522 名古屋市中村区名駅3-28-12(大名古屋ビル)
静岡支店……………………〒422-8067 静岡市駿河区南町14-25(エスパティオ6階)
豊田支店……………………〒471-0034 豊田市小坂本町1-5-10(矢作豊田ビル)
関西支社……………………〒660-0807 尼崎市長洲西通1丁目26-1中国支社……………………〒730-8657 広島市中区中町7-32(ニッセイ広島ビル)
岡山支店……………………〒700-0901 岡山市本町6-36(第一セントラルビル)
四国支社……………………〒760-8654 高松市寿町1-1-8(日本生命高松駅前ビル)九州支社……………………〒810-8686 福岡市中央区天神2-12-1(天神ビル)
…TEL(048)710-5610 FAX(048)710-5617
…………………TEL(011)212-3794 FAX(011)241-0860
………………TEL(022)216-4550 FAX(022)262-4276
…… TEL(048)600-5825 FAX(048)600-5866
……………TEL(025)241-7258 FAX(025)241-0693
…………………TEL(076)233-5538 FAX(076)233-5510
……………TEL(052)565-3112 FAX(052)565-3298
……………TEL(054)202-5634 FAX(054)202-5655
…………………TEL(0565)34-4112 FAX(0565)34-4199
…………………………………TEL(06)4868-8653 FAX(06)4868-8761
………………TEL(082)248-5236 FAX(082)248-5226
…………………TEL(086)225-5171 FAX(086)226-0889
………………TEL(087)821-2275 FAX(087)825-0056
……………………TEL(092)721-2356 FAX(092)721-2149
インターネットでの情報サービス http://www.diax-net.com/
※1 仕様及びデザインは改良の為、予告なく変更する場合があります。※2 本カタログの内容は日本国内標準仕様です。※3 本品のうち、外為法に定める規制品(貨物 ・技術)を輸出する場合は、経済産業大臣の許可が必要です。
安全に関するご注意 ●正しく安全にお使いいただくため、ご使用の前に必ず「取扱説明書」をよくお読みください。
0.44 0.46 0.48 0.50 0.52 0.54 0.56
ノンコート超硬Non-coated
TiAIN系被膜TiAlN
CRN
摩擦係数Friction Coefficient
■銅に対する摩擦係数(600℃)Friction Coefficient for Copper(600℃)
0.48
0.55
0.52
〈工具の技術的なご相談は…〉
〈その他のご相談は…〉
よ い 工 具 は 一 番
入会窓口はhttps://www.osg.co.jp/support/club/index.php
OSG E-mail倶楽部
コミュニケーションE-mailコミュニケーションFAX
コミュニケーションダイヤル
無料メールマガジンE-mailで最新情報をお届けします。
0533-82-1134 [email protected]
E-mail:[email protected]
1110
1248
1408
350
450
125
1250
1700
(680)
1248
1100
φDs
φDc
φD1
R ℓ
ℓ2
L
φDs
φDc
φD1
L
ℓ
ℓ2
φDs
φDc
φD1
R
L
ℓℓ2
ℓ3
φDs
φDc
φD1
L
ℓ
ℓ2
ℓ3
加工機本体外形図 Main body of machining outline drawing仕 様 Specification
銅電極加工用エンドミル Copper Electrode End Mill
冷却装置Cooling system
加工機本体Main body of machine
ミストコレクタ(オプション)Mist collector (Option)
銅電極加工用に開発された、これまでにない耐摩耗性と高密着力を高次元で実現したCrNコーティングを施したエンドミルシリーズです。高速・高温下でも銅に対する摩擦係数が極めて小さく、反溶着性に優れます。This end mill seriese has been developed for Copper Electrode milling operation with special CrN Coating with a superb wear resistance and high adhesion.
◦�高速加工を実現する、優れたダイナミックバランス!◦�ダイナミックバランスを実現する高精度シャンク&�短全長仕様!◦�高速切削下でも反溶着性に優れる高潤滑CrNコーティング!
・Dynamically balanced bottom teeth design.・�High precision ground shank and shorter overall length for
high speed milling.・�Superb CrN coating with high lubricity against welding in
high speed milling applications.
CRN-HS-EBD CRN-HS-EDS
■�上記シリーズ以外にボール(R0.1 ~)、スクエア(φ0.2 ~)他各種取り揃えております。�Beside the product series shown on above side.OSG also has other line ups as ball nose (R0.1~), square end (0.2mm dia.~), etc.
各軸ストロークEach axis stroke
X軸:200㎜ Y軸:150㎜ Z軸:110㎜Xaxis:200㎜ Yaxis:150㎜ Zaxis:110㎜
X・Y・Z軸最大送り速度X・Y・Z axis maximum feed speed 10m/min
スピンドル最大回転数Maximum rotation speed of spindle 60,000min-1
工具自動交換装置Automatic tool changer
標準8本Standard�8
ツールシャンクTool holder
SK10テーパSK10 taper
最大使用エンドミル径Use end mill diameter of maximum Φ8㎜
ワークパレット数Number of work pallets
最大4個Maximum 4
切削液Cutting fluid
20L(油性切削液、内部循環方式)(Oiliness cutting fluid、Internal circulation method)
NC制御装置NC controller MELDAS70A
最大消費電力Maximum electric power consumption 7KVA
供給エアーSupply air
0.6MPa以上0.6MPa or more
機械外形寸法Outside dimension of machine 1250(W)× 1408(D)× 1700(H)
機械本体重量Weight of machine 1000㎏
材 質:銅タングステン
材 質:銅タングステン
Material : CuW
Material : CuW
材 質: 銅
材 質: 銅 材 質: 銅
Material : Cu
Material : Cu Material : Cu
材 質: 銅
Material : Cu P
スピンドル冷却液配管Spindle cooling fluid piping
切削液配管Cutting fluid piping
スピンドル、切削液同時冷却Spindle and cutting fluidsimultaneous cooling
切削液Cutting fluid
スピンドルSpindle
加工室内ミスト冷却Processing room mist cooling
外装カバーOuter cover
内装カバーInner cover
インバータ制御式冷却装置Inverter control typeCooling system
インバータ制御式冷却装置Inverter control typeCooling system
二重カバー構造Double cover structure
■�温度一定冷却システム概要�Outline of temperature constant cooling system
Space saving, Highspeed, High accuracy, Electrode machining
特 徴 Feature
最新CNC(MELDAS70)採用により補間制御の微細化及び演算処理の高速化により形状精度向上It improves form accuracy by the latest CNC(MELDAS70) adoption by the refinement of the interpolation control and speeding up the operation processing.
C N C
省スペース Space saving
同等ストロークで他社比1/2の設置スペースIt is an equivalent stroke and installation space of 1/2 compared with the other companies.
高剛性鋳物、横型構造採用及びスピンドルの高速化により安定加工かつ切屑の排出が良好となり面粗さが飛躍的に向上Stability and the exhaust of Sets become excellent by the high stiffness casting, the horizontal and the structure adopting, and speeding up the spindle and the side roughness improves rapidly.
高品位加工面 High-quality machined surface
コネクタ、ゲート等微細な電極を効率よく製作するために適合したストロークサイズStroke size suited to produce minute electrode like connector and gate, etc. efficiently.
各ストロークEach stroke
X:200㎜ Y:150㎜ Z:110㎜
適合サイズ Agreement size
高速、高精度スピンドル採用により加工速度アップIt improves the processing speed by the highspeed and the highly accurate spindle adoption.
生 産 性 Productivity
温度一定型冷却システム採用により熱変位抑制The heat displacement is control led by the temperature constant type cooling system adoption.
高 精 度 High accuracy
微細ピン加工Minute pin machining
多数穴加工Multi holes machining
極薄フィン加工Thin type fin machining
多面体加工Polyhedron machining
球体加工Sphere machining
微細形状加工Minute shape machining
加工サンプル Samples for various machining application
高周波スピンドル High frequency spindle
標準品 Standard Parts
オプション品 Optional Parts▶フィッシャープレサイス社製Made by FischerPrecise company
By highspeed Max.60,000 revolutions per minute that specializes in the micromachining
��◦ �The ideal cutting speed region is achieved in the small diameter endmill and the ball endmill with stability.
��◦ �Feed speed of the highspeed table becomes possible so far and the machining time is shortened.
��◦ �Improvement of profile irregularity
Compact outside dimension (φ60 )
��◦ �The response of the temperature control is improved thermal capacity small.
��◦ Interference in the work piece is minimized.
��◦ The SK10 holder that specializes in small diameter endmills is adopted. It has high rigidity, since it has one solid body design including the pull stud bolt.
レーザ式ツール長計測システムLaser measuring system for tool setting and breakage detection
ミストコレクタMist collector
温度一定冷却システムCooling system
ブルーム LMTBLUM LMT
◦非接触のため小径エンドミルも折損なし
◦工具長と径を同時に測定可能
◦加工中に工具折損検知が可能◦ �Even small diameter endmill is not damaged such as
chipping and breakage since this device is noncontact measuring system.
◦ �The length of the tool and the diameter can be measured at the same time.
◦ �Tool breakage detection is applicable during the machining operation.
◦�加工時に排出されたオイルミストの捕集効率99.8%を実現
◦ �The collection efficiency 99.8% of the oil mist exhausted when processing it is achieved
◦�冷却装置はインバータ制御によりスピンドル温度を± 0.1 の精度で冷却
◦�冷却装置を利用して切削液をスピンドル温度と同調させることにより熱変位を抑制
◦外気温の影響を抑えた2重カバー構造を採用
◦ �The cooling system cools the temperature of the spindle
by the inverter control by the accuracy of ±0.1.
◦ �To minimize thermal displacement, both temperature in the spindle and in the cutting oil are controlled simultaneously by using this cooling system.
◦ �The double cover structure to suppress the influence of the outside temperature is adopted.
◦ LEDだから長寿命◦保護グレード IP67 により油や切り粉に強い◦ Because it is LED, it is long-lived. ◦ �It is strong in oil and the cutting powder because of
protection grade IP67.
微細加工に特化した高速Max. 60,000 回転 /分により ◦小径エンドミルやボールエンドミルに理想的切削速度領域を安定に実現 ◦従来よりも高速テーブル送り速度が可能となり加工時間を短縮 ◦面精度の向上
コンパクトな外形寸法(φ60) ◦熱容量が小さく、温度コントロールのレスポンスの向上 ◦工作物への干渉を最小化 ◦小径エンドミルに特化した高剛性プルスタッド一体型SK10 ホルダを採用
メーカー Maker
照明器具Luminaire
部品名 Parts
特 徴 Feature
特 徴 Feature
特 徴 Feature
特 徴 Feature
特 徴 Feature
部品名 Parts
部品名 Parts
部品名 Parts
□ 0.08 ×2フィン巾 0.1高 さ 1.5
1.5
20