E D E D T E T L E E GP-02 GP-02 E D - Refer to AR610...
1
DET A I L DELETE D DET A I L DELETE D DET A I L DELETE D DET A I L DELETE D - SG - 10.08.12 90% CD ISSUE 01 SG - 07.09.12 100% CD - TENDER ISSUE 02 Acoustic Transfers Drawings for Requirements Mechanical Engineer Specification & - Refer to Aecom, ULA, Duct locations for Acoustic Transfer Bulkhead / - Refer to AR610 & AR611 D 03 SG - WG-102 SUPERSEDED 18.07.13 Rw 35 Rw 40 Rw 45 Rw 50 Rw 55 Rw 60 AWT-01 AWT-02 AWT-03 AWT-04 AWT-05 AWT-06 AWT-07 AWT-08 AWT-09 REFER TO AECOM SCHEDULE OF ACOUSTIC PARTITION TYPES Rw 38 AWT-10 A SG - 20.08.13 UPDATES TO INCLUDE ACOUSTIC REVISIONS WALL TYPES ADDED B SG - 17.09.13 UPDATED WG DETAILS TO DELETE BAFFLE D C SG - 13.11.13 UPDATES AS CLOUDED 16.12.13 - SG D WALL TYPE ADDED Project No. Drawing No. FILENAME - $FILE$ Date Drwn Co-Ord Chck Revision Title AND DRAWINGS COPYRIGHT OF THIS DRAWING IS VESTED IN WARDLE DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL RELEVANT CONTRACT, SPECIFICATIONS BY THE CONSULTANT. FIGURED DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED. THIS SHALL NOT COMMENCE PRIOR TO THE RETURN OF UNAMENDED SHOP DRAWINGS SIGNED ALL SHOP DRAWINGS SHALL BE SUBMITTED TO THE SUPERINTENDENT AND MANUFACTURE CONTRACTORS SHALL VERIFY JOB DIMENSIONS BEFORE ANY JOB COMMENCES. Rev Amd Date Revision Description Issue Scale THIS DRAWING IS AN UNCONTROLLED COPY UNLESS STAMPED OTHERWISE +1 617 442 6232 Facsimile +1 888 442 1417 Email Telephone 1920 Washington Street No.2 Boston Massachusetts 02118 USA [email protected] NADAAA 0913 AR Project Client Parkville Campus University of Melbourne Building and Planning Faculty of Architecture Tel : +61 3 8662 0400 www.johnwardlearchitects.com ABN 83 006 814 268 © 2012 John Wardle Architects 25 Rokeby Street, Collingwood, Victoria 3066 Australia FOR CONSTRUCTION General Notes FFL SSL FFL SSL WG-401 ACOUSTIC SEALANT STEEL STUDS OTHER SIDE OF 64mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK ACOUSTIC SEALANT ACOUSTIC SEALANT WG-402 ACOUSTIC SEALANT ACOUSTIC SEALANT ACOUSTIC SEALANT ALUMINIUM SECTIONS SEAL BETWEEN NEOPRENE / ACOUSTIC STEEL STUDS OTHER SIDE OF 92mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK MIN. 100mm WG-403 WG-501 AND BEAM CONCRETE SLAB UPSTAND INSITU CONCRETE ACOUSTIC SEALANT SEALANT BOTH SIDES FLUSH STOPPING BEAD WITH GLAZING AS SPECIFIED WITH SEALANT BOTH SIDES FLUSH STOPPING BEAD FIXED TO FLOOR SLAB BOTTOM PLATE SECURELY BOTH SIDES ACOUSTIC SEALANT WALL AS SCHEDULED FCL FFL SSL WG-301 WG-302 STR.SLAB U/S AWT-01 SEALANT OF FLEXIBLE SMOKE CONTINUOUS BEAD INSTALL OVER WG-306 AWT-02 WG-307 SMOKE SEALANT FLEXIBLE ACRYLIC CONTINUOUS BEAD OF PYROSTOP FIRE RATED GLASS GLASS: 18mm PILKINGTON CENTRE GLAZED FRAMING SYSTEM - INSULATED STEEL PROPRIETARY FIRE/SMOKE SEAL FIRE/SMOKE SEAL SIDE GENERALLY JUSTIFIED TO CORRIDOR STUD FRAMING. GLASS FRAME SECURELY FIXED TO ANODISED ALUMINIUM WINDOW 100mm x 30mm SLIMLINE BOTH SIDES ACOUSTIC SEALANT WG-304 WG-303 50 100 8 WG-104 OF SMOKE WALL MAINTAIN INTEGRITY HEIGHT ONE SIDE TO JUCTIONS FULL SMOKE SEAL ALL BEYOND ALUMINIUM MULLIONS 150mm X 44mm ANODISED WG-102 WG-103 AWT-01 FIXING COMPRESSED BY SCREW FOAM STRIP BOTH SIDES 6mm THICK CLOSED CELL CHANNEL GLAZING SUPPORT ABOVE BRACING STEEL STUD WG-101 ABOVE CONCRETE SLAB ACOUSTIC SEALANT STEEL STUDS OTHER SIDE OF 92mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK WG-105 UPSTAND INSITU CONCRETE ACOUSTIC SEALANT GLAZING LAMINATED V-LAM HUSH NOMINAL12.5mm CF-04 ACOUSTIC SEALANT WG-106 GLAZING STRUCTURAL AWT-04 AWT-05 AWT-05 AWT-03 AWT-01 20 FULL DEPTH SEALANT AWT-01 LOCATIONS AR610 / 611 FOR REQ. REFER TO FOR NATURAL VENT. ZONE ABOVE CEILING TRANSFER DUCT LOCATIONS AR610 / 611 FOR REQ. REFER TO FOR NATURAL VENT. ZONE ABOVE CEILING TRANSFER DUCT AWT-02 LOCATIONS AR610 / 611 FOR REQ. REFER TO FOR NATURAL VENT. ZONE ABOVE CEILING TRANSFER DUCT CORRIDOR WORKSPACE CORRIDOR INSIDE VA R I E S - R E F E R ELE V . AWT-03 STR.SLAB U/S FCL FFL SSL LINING, FINISH AS SPECIFIED WITH 0.8MM THICK ALUMINIUM 25MM THICK MDF CAPPING 1200MM FROM PARTITION 1200MM FROM PARTITION AWT-03 WG-107 AWT-03 BOTH SIDES ACOUSTIC SEALANT WG-308 VA R I E S - R E F E R ELE V . AWT-03 AS SPECIFIED GLAZING LAMINATED V-LAM HUSH NOMINAL12.5mm ACOUSTIC/SMOKE SEAL AS SPECIFIED SLIDING DOOR AS SPECIFIED AS SPECIFIED STUDS EACH SIDE OF 76mm STEEL 1 x 13mm PLASTERBOARD TO LINING, FINISH AS SPECIFIED WITH 0.8MM THICK ALUMINIUM 25MM THICK MDF CAPPING SMOKE SEALANT AWT-10 1200MM FROM PARTITION 1200MM FROM PARTITION 1200MM FROM PARTITION 1200MM FROM PARTITION AS SPECIFIED FFL SSL WG-108 AWT-03 ABOVE CEILING TBC FOR VENTILATION ACOUSTIC TRANSFER GLAZING LAMINATED V-LAM HUSH NOMINAL12.5mm OTHER SIDE. LAMINATED GLAZING TO ONE SIDE, 12.38mm MIN. LAMINATED GLAZING TO 10.38mm MIN. GLAZING LAMINATED V-LAM HUSH NOMINAL12.5mm FULL DEPTH SEALANT LINING, FINISH AS SPECIFIED THICK ALUMINIUM CAPPING WITH 0.8MM 25MM THICK MDF 20 AWT-01 AS SPECIFIED BOTH SIDES ACOUSTIC SEALANT WG-309 CORRIDOR INSIDE VA R I E S - R E F E R ELE V . AWT-02 STUDS EACH SIDE OF 76mm STEEL 1 x 13mm PLASTERBOARD TO LINING, FINISH AS SPECIFIED WITH 0.8MM THICK ALUMINIUM 25MM THICK MDF CAPPING ABOVE CONCRETE SLAB SMOKE SEALANT TO CONCRETE SOFFIT TRACK SECURELY FIXED DEFLECTION HEAD GLAZING LAMINATED NOMINAL10.38mm BOTH SIDES ACOUSTIC SEALANT WG-310 CORRIDOR INSIDE VA R I E S - R E F E R ELE V . AWT-04 STUDS EACH SIDE OF 76mm STEEL 1 x 13mm PLASTERBOARD TO LINING, FINISH AS SPECIFIED WITH 0.8MM THICK ALUMINIUM 25MM THICK MDF CAPPING SMOKE SEALANT XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 XA-05 HEAD AS SPECIFIED OVER PARTITION INSULATION BATT LAID FOAM STRIP 6mm THICK CLOSED CELL HEAD AS SPECIFIED OVER PARTITION INSULATION BATT LAID ANODIZED FINISH. PROFILE. PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT 100mm STRUCTURALLY GLAZED. GLAZING CHANNEL. ANODISED ALUMINIUM 25mm W x 25mm H NO MULLIONS. BETWEEN GLASS PANES. SILICONE BUTT JOINTS NOTE, FULL HEIGHT IN FLOOR FINISH. CHANNEL, RECESSED ALUMINIUM GLAZING 30x40x6mm ANODISED SOFFIT. CONCRETE EXPOSED WINDOW. PERIMETER OF ACOUSTIC SEAL TO CONTINUOUS BEYOND ALUMINIUM MULLIONS 150mm X 44mm ANODISED GP-01 MOUNTED TO CEILING. CHANNEL. SURFACE ALUMINIUM GLAZING 32 x 32 ANODISED FULL HEIGHT GLAZING. MOUNTED TO CEILING. CHANNEL. SURFACE ALUMINIUM GLAZING 32 x 32 ANODISED FULL HEIGHT GLAZING. FULL HEIGHT GLAZING. IN FLOOR FINISH. CHANNEL RECESSED ALUMINIUM GLAZING 32 W x20 mm H ANODISED FLUSH WITH CEILING RECESSED TO FINISH GLAZING CHANNEL. ANODISED ALUMINIUM 30mm W x 20mm H FLUSH WITH CEILING RECESSED TO FINISH GLAZING CHANNEL ANODISED ALUMINIUM 32mm W x 32mm H FULL HEIGHT GLAZING. IN FLOOR FINISH. CHANNEL RECESSED ALUMINIUM GLAZING 32 W x20 mm H ANODISED GLAZING LAMINATED V-LAM HUSH NOMINAL12.5mm GLAZING LAMINATED V-LAM HUSH NOMINAL12.5mm GLAZING LAMINATED V-LAM HUSH NOMINAL12.5mm CONRETE SOFFIT SURFACE-MOUNTED TO GLAZING CHANNEL ANODISED ALUMINIUM NOMINAL 32x32mm ACOUSTIC SEALANT GLAZING. STRUCTURAL SILICONE GLAZING ANGLE. ANODISED ALUMINIUM 32mm H x 20mm W GLAZING STRUCTURAL UPSTAND INSITU CONCRETE CF-04 GLAZING. STRUCTURAL SILICONE mm FIXING ANGLE. GLAZING ANGLE AND 32 x 50 ANODISED ALUMINIUM 32mm H x 20mm W BETWEEN PANES. SILICONE BUTT JOINTS RATING. VERTICAL GLASS FOR ACOUSTIC 10.38mm LAMINATED MULLIONS ??????. FIXING COMPRESSED BY SCREW FOAM STRIP BOTH SIDES 6mm THICK CLOSED CELL ANODIZED FINISH. PROFILE. PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT 100mm WINDOW. PERIMETER OF ACOUSTIC SEAL TO CONTINUOUS BETWEEN PANES. SILICONE BUTT JOINTS RATING. VERTICAL GLASS FOR ACOUSTIC 10.38mm LAMINATED SILL. SEALANT TO WINDOW CONTINUOUS SMOKE FIXING COMPRESSED BY SCREW FOAM STRIP BOTH SIDES 6mm THICK CLOSED CELL ANODIZED FINISH. PROFILE. PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT WINDOW. PERIMETER OF ACOUSTIC SEAL TO CONTINUOUS BETWEEN PANES. SILICONE BUTT JOINTS RATING. VERTICAL GLASS FOR ACOUSTIC 10.38mm LAMINATED SILL. SEALANT TO WINDOW CONTINUOUS SMOKE ANODIZED FINISH. PROFILE. PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT GLAZING SILICONE BUTT JOINT GLAZING SILICONE BUTT JOINT CONCRETE SOFFIT NO MULLIONS. BETWEEN GLASS PANES. SILICONE BUTT JOINTS NO MULLIONS. BETWEEN GLASS PANES. SILICONE BUTT JOINTS CONCRETE SOFFIT SURFACE MOUNTED TO GLAZING CHANNEL ANODISED ALUMINIUM NOMINAL 32x32mm DRAWINGS FOR DETAIL. REFER ENGINEERS CONCRETE SOFFIT. SUSPENDED FROM HEADER RESTRAINT FABRICATED STEEL ANODIZED FINISH. PROFILE. PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30 mm DOUBLE CONCRETE SOFFIT MIN. 50mm SPACE. OTHER SIDE. LAMINATED GLAZING TO 16.38mm MIN. GLAZING TO ONE SIDE. 12.38mm MIN. LAM. ANODIZED FINISH. PROFILE. PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT CONCRETE SOFFIT 50mm SPACE OTHER SIDE WITH MIN. LAMINATED GLAZING TO 16.38mm MIN. GLAZING TO ONE SIDE, 12.38mm MIN. LAM. DOUBLE GLAZED FOR ACOUSTIC. LAMINATED GLASS MIN. 10.38mm GLASS. SILICONE BUTT JOINTS TO ANODIZED FINISH. PROFILE. PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT DRAWINGS FOR DETAIL. REFER ENGINEERS CONCRETE SOFFIT. SUSPENDED FROM HEADER RESTRAINT FABRICATED STEEL CONCRETE SOFFIT. DRAWINGS FOR DETAIL. REFER ENGINEERS CONCRETE SOFFIT. SUSPENDED FROM HEADER RESTRAINT FABRICATED STEEL CONCRETE SOFFIT. CONCRETE SOFFIT. ACOUSTIC SEALANT STEEL STUDS. OTHER SIDE OF 2 x 92mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK 150MM AIR GAP LAMINATED GLASS GLASS & 12.76mm 10.36mm LAMINATED DRAWINGS FOR DETAIL. REFER ENGINEERS CONCRETE SOFFIT. SUSPENDED FROM HEADER RESTRAINT FABRICATED STEEL ACOUSTIC SEALANT AS SPECIFIED XA-05 ACOUSTIC SEALANT 150 AIR GAP CONCRETE SOFFIT. OVER PARTITION INSULATION BATT LAID SOFFIT. EXPOSED CONCRETE CHANNEL. ALUMINIUM GLAZING 32 W x20 mm H ANODISED CHANNEL. ALUMINIUM GLAZING 32 W x20 mm H ANODISED GLASS. SILICONE BUTT JOINTS TO JOINERY SILL. PLASTERBOARD OR CHANNEL RECESSED ALUMINIUM GLAZING 32 W x 32 mm H ANODISED TO LOUVRES. LAMINATED GLASS V-LAM HUSH NOMINAL12.5mm GP-01 GP-01 GP-02 GP-02 GP-04 GP-03 GP-04 GP-05 GP-05 GP-04 GP-04 GP-10 GP-06 ANODIZED FINISH. PROFILE. PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30 mm DOUBLE GP-07 GP-08 GP-09 ANGLES. BETWEEN GLAZING ALUMINIUM INFILL SURFACES OF THE GLASS. BETWEEN INTERNAL HEAD & SILL. MIN 150 mm GLAZING ANGLES TO ANODISED ALUMINIUM 75 x 75 x 3mm thick FRAME. CUSTOM FABRICATED CHANNELS. BETWEEN GLAZING ALUMINIUM INFILL SURFACES OF THE GLASS. BETWEEN INTERNAL SILL. MIN 100 mm CHANNELS TO HEAD & ALUMINIUM GLAZING 2 No 32 x 32 ANODISED FRAME. CUSTOM FABRICATED GP-11 WG-404 AWT-05 ACOUSTIC SEALANT 150MM AIR GAP LAMINATED GLASS GLASS & 12.76mm 10.36mm LAMINATED ACOUSTIC SEALANT STEEL STUD OTHER SIDE OF 1x150mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK CONCRETE SOFFIT. AS SPECIFIED XA-05 STEEL STUD OTHER SIDE OF 1x150mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK ACOUSTIC SEALANT ANGLES. BETWEEN GLAZING ALUMINIUM INFILL SURFACES OF THE GLASS. BETWEEN INTERNAL HEAD & SILL. MIN 150 mm GLAZING ANGLES TO ANODISED ALUMINIUM 75 x 75 x 3mm thick FRAME. CUSTOM FABRICATED GP-09 - - - Dec 2011 7505 WALL TYPE DETAILS SHEET 6 1:5 @ A0 1:10 @ A2
Transcript of E D E D T E T L E E GP-02 GP-02 E D - Refer to AR610...
DET
AIL D
ELETE
D
DET
AIL D
ELETE
D
DET
AIL D
ELETE
D
DET
AIL D
ELETE
D
-SG - 10.08.1290% CD ISSUE01
SG - 07.09.12100% CD - TENDER ISSUE02
Acoustic Transfers
Drawings for Requirements Mechanical Engineer Specification & - Refer to Aecom, ULA,
Duct locations for Acoustic Transfer Bulkhead / - Refer to AR610 & AR611
D
03 SG -WG-102 SUPERSEDED 18.07.13
Rw 35
Rw 40
Rw 45
Rw 50
Rw 55
Rw 60
AWT-01 AWT-02
AWT-03
AWT-04
AWT-05 AWT-06
AWT-07 AWT-08
AWT-09
REFER TO AECOM SCHEDULE OF ACOUSTIC PARTITION TYPES
Rw 38 AWT-10
A SG - 20.08.13UPDATES TO INCLUDE ACOUSTIC REVISIONS
WALL TYPES ADDED
B SG - 17.09.13UPDATED WG DETAILS TO DELETE BAFFLE
D
C SG - 13.11.13UPDATES AS CLOUDED
16.12.13-SGD WALL TYPE ADDED
Project No.
Drawing No.
FILENAME - $FILE$
Date Drwn Co-Ord Chck
Revision
Title
AND DRAWINGS COPYRIGHT OF THIS DRAWING IS VESTED IN WARDLE
DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL RELEVANT CONTRACT, SPECIFICATIONS
BY THE CONSULTANT. FIGURED DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED. THIS
SHALL NOT COMMENCE PRIOR TO THE RETURN OF UNAMENDED SHOP DRAWINGS SIGNED
ALL SHOP DRAWINGS SHALL BE SUBMITTED TO THE SUPERINTENDENT AND MANUFACTURE
CONTRACTORS SHALL VERIFY JOB DIMENSIONS BEFORE ANY JOB COMMENCES.
Rev Amd DateRevision DescriptionIssue
Scale
THIS DRAWING IS AN UNCONTROLLED COPY UNLESS STAMPED OTHERWISE
+1 617 442 6232
Facsimile
+1 888 442 1417
Telephone
1920 Washington
Street No.2
Boston
Massachusetts
02118 USA [email protected]
NADAAA
0913
AR
Project
Client
Parkville Campus
University of Melbourne
Building and Planning
Faculty of Architecture
Tel : +61 3 8662 0400 www.johnwardlearchitects.com
ABN 83 006 814 268© 2012 John Wardle Architects
25 Rokeby Street, Collingwood, Victoria 3066 Australia
FOR CONSTRUCTION
General Notes
FFL
SSL
FFL
SSL
WG-401
ACOUSTIC SEALANT
STEEL STUDSOTHER SIDE OF 64mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK
ACOUSTIC SEALANT
ACOUSTIC SEALANT
WG-402
ACOUSTIC SEALANT
ACOUSTIC SEALANT
ACOUSTIC SEALANT
ALUMINIUM SECTIONSSEAL BETWEEN NEOPRENE / ACOUSTIC
STEEL STUDSOTHER SIDE OF 92mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK
MIN.100mm
WG-403
WG-501
AND BEAMCONCRETE SLAB
UPSTANDINSITU CONCRETE
ACOUSTIC SEALANT
SEALANT BOTH SIDESFLUSH STOPPING BEAD WITH
GLAZING AS SPECIFIED
WITH SEALANT BOTH SIDES FLUSH STOPPING BEAD
FIXED TO FLOOR SLABBOTTOM PLATE SECURELY
BOTH SIDESACOUSTIC SEALANT
WALL AS SCHEDULED
FCL
FFL
SSL
WG-301 WG-302
STR.SLABU/S
AWT-01
SEALANTOF FLEXIBLE SMOKE CONTINUOUS BEAD INSTALL OVER
WG-306
AWT-02
WG-307
SMOKE SEALANT FLEXIBLE ACRYLIC CONTINUOUS BEAD OF
PYROSTOP FIRE RATED GLASSGLASS: 18mm PILKINGTON
CENTRE GLAZEDFRAMING SYSTEM - INSULATED STEEL PROPRIETARY
FIRE/SMOKE SEAL
FIRE/SMOKE SEAL
SIDE GENERALLYJUSTIFIED TO CORRIDORSTUD FRAMING. GLASS FRAME SECURELY FIXED TO ANODISED ALUMINIUM WINDOW 100mm x 30mm SLIMLINE
BOTH SIDESACOUSTIC SEALANT
WG-304WG-303
50100 8
WG-104
OF SMOKE WALLMAINTAIN INTEGRITY HEIGHT ONE SIDE TO JUCTIONS FULL SMOKE SEAL ALL
BEYONDALUMINIUM MULLIONS 150mm X 44mm ANODISED
WG-102 WG-103
AWT-01
FIXINGCOMPRESSED BY SCREW FOAM STRIP BOTH SIDES 6mm THICK CLOSED CELL
CHANNELGLAZING SUPPORT ABOVE BRACING STEEL STUD
WG-101
ABOVECONCRETE SLAB
ACOUSTIC SEALANT
STEEL STUDSOTHER SIDE OF 92mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK
WG-105
UPSTANDINSITU CONCRETE
ACOUSTIC SEALANT
GLAZINGLAMINATED V-LAM HUSH NOMINAL12.5mm
CF-04
ACOUSTIC SEALANT
WG-106
GLAZINGSTRUCTURAL
AWT-04 AWT-05
AWT-05
AWT-03
AWT-01
20
FULL DEPTH SEALANT
AWT-01
LOCATIONS AR610 / 611 FOR REQ. REFER TO
FOR NATURAL VENT. ZONE ABOVE CEILING
TRANSFER DUCT
LOCATIONS AR610 / 611 FOR REQ. REFER TO
FOR NATURAL VENT. ZONE ABOVE CEILING
TRANSFER DUCT
AWT-02
LOCATIONS AR610 / 611 FOR REQ. REFER TO
FOR NATURAL VENT. ZONE ABOVE CEILING
TRANSFER DUCT
CORRIDOR WORKSPACE CORRIDOR INSIDE
VA
RIE
S - R
EFE
R E
LE
V.
AWT-03
STR.SLABU/S
FCL
FFL
SSL
LINING, FINISH AS SPECIFIEDWITH 0.8MM THICK ALUMINIUM 25MM THICK MDF CAPPING
1200MM FROM PARTITION 1200MM FROM PARTITION
AWT-03
WG-107
AWT-03
BOTH SIDESACOUSTIC SEALANT
WG-308
VA
RIE
S - R
EFE
R E
LE
V.
AWT-03
AS SPECIFIED
GLAZINGLAMINATED V-LAM HUSH NOMINAL12.5mm
ACOUSTIC/SMOKE SEAL
AS SPECIFIED
SLIDING DOOR AS SPECIFIED
AS SPECIFIED
STUDSEACH SIDE OF 76mm STEEL 1 x 13mm PLASTERBOARD TO
LINING, FINISH AS SPECIFIEDWITH 0.8MM THICK ALUMINIUM 25MM THICK MDF CAPPING
SMOKE SEALANT
AWT-10
1200MM FROM PARTITION 1200MM FROM PARTITION 1200MM FROM PARTITION 1200MM FROM PARTITION
AS SPECIFIED
FFL
SSL
WG-108
AWT-03
ABOVE CEILING TBCFOR VENTILATION ACOUSTIC TRANSFER
GLAZINGLAMINATED V-LAM HUSH NOMINAL12.5mm
OTHER SIDE. LAMINATED GLAZING TO ONE SIDE, 12.38mm MIN. LAMINATED GLAZING TO 10.38mm MIN.
GLAZINGLAMINATED V-LAM HUSH NOMINAL12.5mm
FULL DEPTH SEALANT
LINING, FINISH AS SPECIFIEDTHICK ALUMINIUM CAPPING WITH 0.8MM 25MM THICK MDF
20
AWT-01
AS SPECIFIED
BOTH SIDESACOUSTIC SEALANT
WG-309
CORRIDOR INSIDE
VA
RIE
S - R
EFE
R E
LE
V.
AWT-02
STUDSEACH SIDE OF 76mm STEEL 1 x 13mm PLASTERBOARD TO
LINING, FINISH AS SPECIFIEDWITH 0.8MM THICK ALUMINIUM 25MM THICK MDF CAPPING
ABOVECONCRETE SLAB
SMOKE SEALANT
TO CONCRETE SOFFITTRACK SECURELY FIXED DEFLECTION HEAD
GLAZINGLAMINATED NOMINAL10.38mm
BOTH SIDESACOUSTIC SEALANT
WG-310
CORRIDOR INSIDE
VA
RIE
S - R
EFE
R E
LE
V.
AWT-04
STUDSEACH SIDE OF 76mm STEEL 1 x 13mm PLASTERBOARD TO
LINING, FINISH AS SPECIFIEDWITH 0.8MM THICK ALUMINIUM 25MM THICK MDF CAPPING
SMOKE SEALANT
XA-05 XA-05
XA-05
XA-05
XA-05
XA-05
XA-05
XA-05
XA-05
XA-05
XA-05
XA-05
XA-05 XA-05
XA-05
XA-05
XA-05
XA-05
HEAD AS SPECIFIEDOVER PARTITIONINSULATION BATT LAID
FOAM STRIP6mm THICK CLOSED CELL
HEAD AS SPECIFIEDOVER PARTITIONINSULATION BATT LAID
ANODIZED FINISH.PROFILE.PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT
100mm STRUCTURALLY GLAZED.GLAZING CHANNEL. ANODISED ALUMINIUM 25mm W x 25mm H
NO MULLIONS.BETWEEN GLASS PANES. SILICONE BUTT JOINTS NOTE, FULL HEIGHT
IN FLOOR FINISH.CHANNEL, RECESSEDALUMINIUM GLAZING 30x40x6mm ANODISED
SOFFIT.CONCRETE EXPOSED
WINDOW.PERIMETER OF ACOUSTIC SEAL TO CONTINUOUS
BEYONDALUMINIUM MULLIONS 150mm X 44mm ANODISED
GP-01
MOUNTED TO CEILING.CHANNEL. SURFACE ALUMINIUM GLAZING 32 x 32 ANODISED
FULL HEIGHT GLAZING.
MOUNTED TO CEILING.CHANNEL. SURFACE ALUMINIUM GLAZING 32 x 32 ANODISED
FULL HEIGHT GLAZING.FULL HEIGHT GLAZING.
IN FLOOR FINISH.CHANNEL RECESSEDALUMINIUM GLAZING 32 W x20 mm H ANODISED
FLUSH WITH CEILING RECESSED TO FINISH GLAZING CHANNEL. ANODISED ALUMINIUM 30mm W x 20mm H
FLUSH WITH CEILING RECESSED TO FINISH GLAZING CHANNEL ANODISED ALUMINIUM 32mm W x 32mm H
FULL HEIGHT GLAZING.
IN FLOOR FINISH.CHANNEL RECESSEDALUMINIUM GLAZING 32 W x20 mm H ANODISED
GLAZINGLAMINATED V-LAM HUSH NOMINAL12.5mm
GLAZINGLAMINATED V-LAM HUSH NOMINAL12.5mm
GLAZINGLAMINATED V-LAM HUSH NOMINAL12.5mm
CONRETE SOFFITSURFACE-MOUNTED TO GLAZING CHANNEL ANODISED ALUMINIUM NOMINAL 32x32mm
ACOUSTIC SEALANT
GLAZING.STRUCTURAL SILICONE GLAZING ANGLE. ANODISED ALUMINIUM 32mm H x 20mm W
GLAZINGSTRUCTURAL
UPSTANDINSITU CONCRETE
CF-04
GLAZING.STRUCTURAL SILICONE mm FIXING ANGLE. GLAZING ANGLE AND 32 x 50 ANODISED ALUMINIUM 32mm H x 20mm W
BETWEEN PANES.SILICONE BUTT JOINTS RATING. VERTICAL GLASS FOR ACOUSTIC 10.38mm LAMINATED
MULLIONS ??????.
FIXINGCOMPRESSED BY SCREW FOAM STRIP BOTH SIDES 6mm THICK CLOSED CELL
ANODIZED FINISH.PROFILE.PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT
100mmWINDOW.PERIMETER OF ACOUSTIC SEAL TO CONTINUOUS
BETWEEN PANES.SILICONE BUTT JOINTS RATING. VERTICAL GLASS FOR ACOUSTIC 10.38mm LAMINATED
SILL.SEALANT TO WINDOW CONTINUOUS SMOKE
FIXINGCOMPRESSED BY SCREW FOAM STRIP BOTH SIDES 6mm THICK CLOSED CELL
ANODIZED FINISH.PROFILE.PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT
WINDOW.PERIMETER OF ACOUSTIC SEAL TO CONTINUOUS
BETWEEN PANES.SILICONE BUTT JOINTS RATING. VERTICAL GLASS FOR ACOUSTIC 10.38mm LAMINATED
SILL.SEALANT TO WINDOW CONTINUOUS SMOKE
ANODIZED FINISH.PROFILE.PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT
GLAZINGSILICONE BUTT JOINT
GLAZINGSILICONE BUTT JOINT
CONCRETE SOFFIT
NO MULLIONS.BETWEEN GLASS PANES. SILICONE BUTT JOINTS
NO MULLIONS.BETWEEN GLASS PANES. SILICONE BUTT JOINTS
CONCRETE SOFFITSURFACE MOUNTED TO GLAZING CHANNEL ANODISED ALUMINIUM NOMINAL 32x32mm
DRAWINGS FOR DETAIL.REFER ENGINEERS CONCRETE SOFFIT. SUSPENDED FROM HEADER RESTRAINT FABRICATED STEEL
ANODIZED FINISH.PROFILE.PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30 mm DOUBLE
CONCRETE SOFFIT
MIN. 50mm SPACE.OTHER SIDE. LAMINATED GLAZING TO 16.38mm MIN. GLAZING TO ONE SIDE. 12.38mm MIN. LAM.
ANODIZED FINISH.PROFILE.PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT
CONCRETE SOFFIT
50mm SPACEOTHER SIDE WITH MIN. LAMINATED GLAZING TO 16.38mm MIN. GLAZING TO ONE SIDE, 12.38mm MIN. LAM. DOUBLE GLAZED
FOR ACOUSTIC.LAMINATED GLASS MIN. 10.38mm
GLASS.SILICONE BUTT JOINTS TO ANODIZED FINISH.PROFILE.PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30mm FRONT
DRAWINGS FOR DETAIL.REFER ENGINEERS CONCRETE SOFFIT. SUSPENDED FROM HEADER RESTRAINT FABRICATED STEEL
CONCRETE SOFFIT.
DRAWINGS FOR DETAIL.REFER ENGINEERS CONCRETE SOFFIT. SUSPENDED FROM HEADER RESTRAINT FABRICATED STEEL
CONCRETE SOFFIT. CONCRETE SOFFIT.
ACOUSTIC SEALANT
STEEL STUDS.OTHER SIDE OF 2 x 92mm PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE 2 x 13mm FYRCHEK
150MM AIR GAPLAMINATED GLASS GLASS & 12.76mm 10.36mm LAMINATED
DRAWINGS FOR DETAIL.REFER ENGINEERS CONCRETE SOFFIT. SUSPENDED FROM HEADER RESTRAINT FABRICATED STEEL
ACOUSTIC SEALANT
AS SPECIFIEDXA-05
ACOUSTIC SEALANT
150
AIR GAP
CONCRETE SOFFIT.
OVER PARTITIONINSULATION BATT LAID
SOFFIT.EXPOSED CONCRETE
CHANNEL.ALUMINIUM GLAZING 32 W x20 mm H ANODISED
CHANNEL.ALUMINIUM GLAZING 32 W x20 mm H ANODISED
GLASS.SILICONE BUTT JOINTS TO JOINERY SILL.PLASTERBOARD OR CHANNEL RECESSEDALUMINIUM GLAZING 32 W x 32 mm H ANODISED
TO LOUVRES.LAMINATED GLASS V-LAM HUSH NOMINAL12.5mm
GP-01 GP-01GP-02GP-02
GP-04
GP-03GP-04
GP-05
GP-05
GP-04GP-04
GP-10
GP-06
ANODIZED FINISH.PROFILE.PERIMETER SHADOWLINE ALUMINIUM WINDOW SUITE. GLAZED PROPRIETRY 100mm X 30 mm DOUBLE
GP-07 GP-08
GP-09
ANGLES.BETWEEN GLAZING ALUMINIUM INFILL SURFACES OF THE GLASS. BETWEEN INTERNAL HEAD & SILL. MIN 150 mm GLAZING ANGLES TO ANODISED ALUMINIUM 75 x 75 x 3mm thick FRAME. CUSTOM FABRICATED
CHANNELS.BETWEEN GLAZING ALUMINIUM INFILL SURFACES OF THE GLASS. BETWEEN INTERNAL SILL. MIN 100 mm CHANNELS TO HEAD & ALUMINIUM GLAZING 2 No 32 x 32 ANODISED FRAME. CUSTOM FABRICATED
GP-11
WG-404
AWT-05
ACOUSTIC SEALANT
150MM AIR GAPLAMINATED GLASS GLASS & 12.76mm 10.36mm LAMINATED
ACOUSTIC SEALANT
STEEL STUD OTHER SIDE OF 1x150mm
PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE
2 x 13mm FYRCHEK
CONCRETE SOFFIT.
AS SPECIFIEDXA-05
STEEL STUD OTHER SIDE OF 1x150mm
PLASTERBOARD TO SIDE, 1 x 13mm FYRCHEK PLASTERBOARD TO ONE
2 x 13mm FYRCHEK
ACOUSTIC SEALANT
ANGLES.BETWEEN GLAZING ALUMINIUM INFILL SURFACES OF THE GLASS. BETWEEN INTERNAL HEAD & SILL. MIN 150 mm GLAZING ANGLES TO ANODISED ALUMINIUM 75 x 75 x 3mm thick FRAME. CUSTOM FABRICATED
GP-09
- - -Dec 2011
7505
WALL TYPE DETAILS
SHEET 6
1:5 @ A0
1:10 @ A2
![msky.ws filefE]sg~z´* )b~6¡D* G&* E¤](https://static.fdocuments.net/doc/165x107/5caa546388c993e3548b6d1c/mskyws-sgz-b6d-g-e.jpg)
