E 930 fuse holders - ABB Group E 930 fuse holders The wide range of ABB SACE System pro M modular...
Transcript of E 930 fuse holders - ABB Group E 930 fuse holders The wide range of ABB SACE System pro M modular...
603052/011
E 930 fuse holders
The wide range of ABB SACESystem pro M modulardevices has been extendedwith the E 930 series of fuseholders with new enhancedperformance levels includingoperating at up to 690 V a.c.With the IP 20 degree ofprotection, the E 930 fuseholders are available for allversions (1P, 1P+N, 2P, 3Pand 3P+N) in sizes for gL andaM industrial cylindrical fusesof 8.5x31.5 mm (up to 20 A),10.3x38 mm (up to 32 A),14x51 mm (up to 50 A) and22x58 mm (up to 125 A) and,on request, in special 8.5x23mm (up to)10 A), 10.3x25 mm(up to 16 A) and 10.3x31.5mm (up to 25 A).The series also includes theE 930-S fuse holder/isolatorwhich complies with thereference StandardEN 60947-3 for 32 A fuses.With regard to application,these devices have beendesigned to be particularlysuitable for protection againstoverloads and short-circuits inelectrical installations, both inthe residential/tertiary sectorand the industrial sector.
Customized protection forfuses of all sizes
If overloads and short-circuitstake place, fuse interventioncan be signalled by replacingthe blind front of the fuseholders for fuses of 8.5x31.5mm (up to 20 A) and 10.3x38mm (up to 32 A) with an E930/KIT transparent cover
and installing a standard lamp6.3 x 28 mm in the specialhousing which lights up if thefuse trips.As far as the versions for fusesof 14x51 mm (up to 50 A) and22x58 mm (up to 125 A) areconcerned, the same remote
signalling function isguaranteed by specialmicroswitches which areavailable as accessoriestogether with a special kit forcoupling up to ten single polesfrom 50 A to 125 A.
E 930 fuse holders
Technical characteristicsFuses of 8.5x31.5 mm Fuses of 10.3x38 mm Fuses of 14x51 mm Fuses of 22x58 mm
(up to 20 A) (up to 32 A) (up to 50 A) (up to 125 A)Rated voltage Un [V] a.c. 400 a.c. 500 a.c. 690 a.c. 690
Rated voltage In [A] 20 32 50 125Rated frequency [Hz] 50/60 50/60 50/60 50/60Size of fuses [mm] 8.5 x 31.5 10,3 x 38 14 x 51 22 x 58Power consumption per pole [W] 0.08…2.6 0.08…2.6 0.25…5 0.3…12.5
Modules [n°] 1, 2, 3 1, 2, 3 1, 1/2, 3, 4, 1/2,6 2, 4, 6, 8Standards IEC 269.2 IEC 269.2 IEC 269.2 - IEC 947.3 IEC 269.2 - IEC 947.3
Approvals IMQ - UTE IMQ - UTE UL - CSA UL - CSA
Code Type DescriptionEA 191 5 E 931/20 one-pole fuse holder (1 module – 8.5x31.5 mm fuses)
EA 201 2 E 931/32 one-pole fuse holder (1 module – 10.3x38 mm fuses)EA 051 1 E 931/50 one-pole fuse holder (1 + modules)
EA 058 6 E 931/125 one-pole fuse holder (2 modules)
1P - Fuse holders for fuses of 8.5x31.5 mm (up to 20 A), 10.3x38 mm(up to 32 A), 14x51 mm (up to 50 A) and 22x58 mm (up to 125 A)
Code Type DescriptionEA 291 3 E 931N/20 one-pole fuse holder with disconnectable neutral on right (1 module – 8.5x31.5 mm fuses)
EA 293 9 E 931N/32 one-pole fuse holder with disconnectable neutral on right (1 module – 10.3x38 mm fuses)EA 052 9 E 931N/50 one-pole fuse holder with disconnectable neutral on right (14x51 mm fuses)EA 056 0 E 931N/50 one-pole fuse holder with disconnectable neutral on left (14x51 mm fuses)EA 059 4 E 931N/125 one-pole fuse holder with disconnectable neutral on right (22x58 mm fuses)
EA 063 6 E 931N/125 one-pole fuse holder with disconnectable neutral on left (22x58 mm fuses)
1P+N - Fuse holders for fuses of 8.5x31.5 mm (up to 20 A),10.3x38 mm(up to 32 A), 14x51 mm (up to 50 A) and 22x58 mm (up to 125 A)
2P - Fuse holders for fuses of 8.5x31.5 mm (up to 20 A), 10.3x38 mm(up to 32 A), 14x51mm (up to 50 A) and 22x58 mm (up to 125 A)
Code Type DescriptionEA 193 1 E 932/20 two-pole fuse holder (2 modules - 8.5x31.5 mm fuses)
EA 203 8 E 931/32 two-pole fuse holder (2 modules - 10.3x38 mm fuses)EA 053 7 E 932/50 two-pole fuse holder (2 modules – 14x51 mm fuses)
EA 060 2 E 932/125 two-pole fuse holder (4 modules – 22x58 mm fuses)TEM
P03
23
TEM
P03
22TE
MP
0321
1
2
1P
1
2
3
4
3P+N
5
6
N1
2
3
4
3P
5
6
1
2
N
1P+N
1
2
3
4
2P
Wiring diagram
Code Type DescriptionEA 194 9 E 933/20 three-pole fuse holder (3 modules – 8.5x31.5 mm fuses)EA 204 6 E 933/32 three-pole fuse holder (3 modules – 10.3x38 mm fuses)EA 054 5 E 933/50 three-pole fuse holder (4 + modules – 14x51 mm fuses)
EA 061 0 E 933/125 three-pole fuse holder (6 modules – 22x58 mm fuses)
3P+N - Fuse holders for fuses of 8.5x31.5 mm (up to 20 A), 10.3x38 mm(up to 32 A), 14x51 mm (up to 50 A) and 22x58 mm (up to 125 A)
Code Type DescriptionEA 292 1 E 933N/20 three-pole fuse holder with disconnectable neutral on right (4 modules-8.5x31.5 mm fuses)
EA 294 7 E 933N/32 three-pole fuse holder with disconnectable neutral on right (4 modules-10.3x38 mm fuses)EA 055 2 E 933N/50 three-pole fuse holder with disconnectable neutral on right (14x51 mm fuses)
EA 057 8 E 933N/50 three-pole fuse holder with disconnectable neutral on left (14x51 mm fuses)EA 062 8 E 933N/125 three-pole fuse holder with disconnectable neutral on right (22x58 mm fuses)EA 064 4 E 933N/125 three-pole fuse holder with disconnectable neutral on left (22x58 mm fuses)
Code Type DescriptionEA 206 1 E 931-S/32 one-pole fuse holder isolator (1 module)EA 295 4 E 931 N-S/32 fuse holder isolator with disconnectable neutral on right (1 moduleEA 208 7 E 932-S/32 two-pole fuse holder isolator (2 modules)
EA 209 5 E 933-S/32 three-pole fuse holder isolator (3 modules)EA 296 2 E 933 N-S/32 three-pole fuse holder isolator with disconnectable neutral on right (3 modules)
32 A fuse holder/isolator
Code Type DescriptionEA 211 1 E 930/KIT accessory (transparent cap) for “fuse blown” LED
EA 065 1 E 930/MCR1P50 microswitch for remote signalling on 50A 1P fuse holdersEA 066 9 E 930/MCR3P50 microswitch for remote signalling on 50 A 3P fuse holders
EA 067 7 E 930/MCR1P125 microswitch for remote signalling on 125 A 1P fuse holdersEA 066 9 E 930/MCR3P125 microswitch for remote signalling on 125A 3P fuse holdersEA 069 3 E 930/ACP50 kit for coupling max of 10 50 A single poles
Accessories
TEM
P03
25TE
MP
0324
TEM
P03
25
TEM
P04
20
3P - Fuse holders for fuses of 8.5x31.5 mm (up to 20 A), 10.3x38 mm(up to 32 A), 14x51 mm (up to 50 A) and 22x58 mm (up to 125 A)
6030
52/0
11 -
11-
‘01
Prin
ted
in It
aly
Tipo
graf
ia...
.
Overall dimensions (20 A-32 A)
1 module 2 modules 3 modules
1P - 1P+N 2P 3P - 3P+N
17.5 35 52.5
45
61
107
Overall dimensions (50 A-125 A)
26
45
70
44
61 35 35 x 2 x 3 x 4
45
70
44
5826 x 2 x 3 x 4
50 A 125 A
ABB SACE S.p.A.Line Protection DevicesViale dell’Industria, 1820010 Vittuone (MI) - ItalyTel.: +39 02 9034 1 - Telefax: +39 02 9034 7609
http://www.abb.com
Due to possible developments of Standards as well as ofmaterials, the characteristics and dimensions specified in thepresent document may be considered binding only uponconfirmation by ABB SACE.