Dynasty 350and700 - Miller - Welding Equipment - /media/miller electric... · PDF...

Click here to load reader

  • date post

    07-May-2018
  • Category

    Documents

  • view

    214
  • download

    1

Embed Size (px)

Transcript of Dynasty 350and700 - Miller - Welding Equipment - /media/miller electric... · PDF...

  • ProcessesTIG (GTAW) Pulsed TIG (GTAW-P) Stick (SMAW) Air Carbon Arc (CAC-A) 350: 1/4-in. maximum 700: 3/8-in. maximum

    Input Power 208 575 V, 3- or 1-Phase PowerAmperage Range 350: 3 350 A 700: 5 700 ARated Output 350: 300 A at 32 V, 60% Duty Cycle 700: 600 A at 44 V, 60% Duty CycleNet Weight 350: 135 lb. (61 kg) 700: 198 lb. (90 kg)

    Industrial ApplicationsPrecision FabricationHeavy FabricationPipe and Tube FabricationAerospaceAluminum Ship RepairAnodized Aluminum Fabrication

    Dynasty350 and 700Issued Dec. 2014 Index No. AD/5.0

    Power source is warranted for 3 years, parts and labor.

    Allows for any input voltage hookup (208575 V) with no manual linking,providing convenience in any job setting.Ideal solution for dirty or unreliable power.

    Meter calibration allows digital meters tobe calibrated for certification.

    120-volt auxiliary power receptacle for cooling system or small tools.

    Wind Tunnel Technologyprotects internal electrical components from airborne contaminants, extending the product life.

    Fan-On-Demand power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine.

    Lift-Arc provides AC or DC arc initiation without the use of high frequency.

    Blue Lightning high-frequency (HF) arc starter for non-contact arc initiation.Provides more consistent arc starts and greater reliability compared to traditional HF arc starters.

    Program memory features nineindependent program memories that maintain/save your parameters.

    Auto-postflow adjusts the length ofpostflow time based on the amperagesetting, shielding your tungsten and eliminating the need to set the postflow time.

    AC/DC Stick FeaturesDIG control allows the arc characteristics to be changed forspecific applications and electrodes. Lower the DIG settingfor smooth running electrodes like E7018 and increase theDIG setting for stiffer, more penetrating electrodes like E6010.

    Hot Start adaptive control provides positive arc startswithout sticking.

    AC frequency control adds additional stability when Stickwelding in AC for smoother welds.

    AC TIG FeaturesIndependent amplitude/amperagecontrol allows EP and ENamperages to be set independentlyto precisely control heat input to the work and electrode.Balance control provides adjustableoxide removal which is essential for creating the highest qualityaluminum welds. These modelsprovide extended ranges.Frequency controls the width of the arc cone and can improvedirectional control of the arc.

    AC WaveformsAdvanced squarewave, fast freezing puddle, deep

    penetration and fast travel speeds.Soft squarewave for a softbuttery arc with maximum

    puddle control and good wetting action.Sine wave for customers that like a traditional arc.

    Quiet with good wetting.Triangular wave reduces the heat input and is good on

    thin aluminum. Fast travel speeds.

    DC TIG FeaturesExceptionally smooth and precisearc for welding exotic materials.

    Pulse. Pulsing can increase puddleagitation, arc stability and travelspeeds while reducing heat inputand distortion. These modelsprovide extended ranges.

    Dynasty 350 Wireless Complete W-375

    Dynasty 350machine only

    QuickSpecs

    Miller Electric Mfg. Co.An ITW Company1635 West Spencer StreetP.O. Box 1079Appleton, WI 54912-1079 USA

    MillerWelds.comEquipment Sales US and CanadaPhone: 866-931-9730FAX: 800-637-2315International Phone: 920-735-4554International FAX: 920-735-4125

    TIG/Stick Welding Power Source

  • 2

    Control Panel

    InputPower

    3-phase

    1-phase

    3-phase

    1-phase

    Rated Output

    250 A at 30 V, 100% duty cycle

    300 A at 32 V, 60% duty cycle

    180 A at 27.2 V, 100% duty cycle

    225 A at 29 V,60% duty cycle

    500 A at 40 V,100% duty cycle

    600 A at 44 V, 60% duty cycle

    360 A at 34 V, 100% duty cycle

    450 A at 38 V, 60% duty cycle

    WeldingAmperage Range

    3 350 A

    3 350 A

    5 700 A

    5 700 A

    Model

    Dynasty350

    Dynasty700

    Max. Open-Circuit Voltage

    75 VDC(10 15 VDC*)

    75 VDC(10 15 VDC*)

    Net Weight

    135.5 lb. (61 kg)

    withTIGRunner308 lb. (140 kg)

    198 lb. (90 kg)

    withTIGRunner370 lb. (168 kg)

    Specifications (Subject to change without notice.)

    Amps Input at Rated Load Output, 50/60 Hz 208 V 230 V 400 V 460 V 575 V KVA KW

    29 26 15 13 10 10.3 9.9

    35 32 18 16 13 12.7 12.1

    35 32 15 12 7.4 6.8

    47 43 21 17 9.8 9.1

    75 68 39 34 27 27 26

    97 88 51 44 35 35 34

    82 74 37 30 17 16

    115 104 52 42 24 22

    Dimensions

    H: 24.75 in. (629 mm)W: 13.75 in. (349 mm)D: 22 in. (559 mm)

    with TIGRunnerH: 43.125 in. (1146 mm)W: 23.125 in. (587 mm)D: 43.75 in. (1111 mm)

    H: 34.5 in. (876 mm)W: 13.75 in. (349 mm)D: 22 in. (559 mm)

    with TIGRunnerH: 53.125 in. (1400 mm)W: 23.125 in. (587 mm)D: 43.75 in. (1111 mm)

    All CE models conform to the applicable parts of the IEC 60974 series of standards.Certified by Canadian Standards Association to both the Canadian and U.S. Standards.

    *Indicates sense-voltage for Lift-Arc TIG and Low OCV Stick.

    1. Memory 36 Combinations (9 AC TIG) (9 AC Stick) (9 DC TIG) (9 DC Stick)

    2. Polarity AC/DC 3. Process/ TIG: HF Impulse, Lift Arc

    Arc Starting STICK: Adaptive Hot Start 4. Output Control Standard Remote,

    2T Trigger Hold, Output ON 5. Pulser Control

    Pulses per Second DC: 0.1 5000 PPS AC: 0.1 500 PPSPeak Time 5 95%Background Amps 5 95%

    6. Sequencer ControlInitial Amps Dynasty 350: 3 350 A Dynasty 700: 5 700 AInitial Slope 0.0 50.0 secondsFinal Slope 0.0 50.0 secondsFinal Amps Dynasty 350: 3 350 A Dynasty 700: 5 700 A

    7. Gas/DIG Preflow 0.0 25.0 seconds Postflow Auto Postflow,

    Adjust 0.0 50 seconds DIG 0 100% 8. AC Waveshape

    EN Amperage 3 350 A/5 700 AEP Amperage 3 350 A/5 700 ABalance 30 99%AC Frequency 20 400 Hz

    9. Amperage Control10. Encoder Control11. Ammeter Display 12. Voltmeter Display13. Memory Display

    Additional Setup Parameter ValuesPreprogrammed StartsDynasty 350 .020 3/16 in. tungstenDynasty 700 .040 1/4 in. tungsten

    Programmable StartsAmperage Dynasty 350: 3 200 A Dynasty 700: 5 200 ATime 0 200 millisecondsRamp Time 0 250 millisecondsMinimum Amperage Dynasty 350: 3 25 A Dynasty 700: 5 25 A

    Additional Triggers 3T, 4T, Mini Logic, 4T Momentary

    Waveshapes Advance Squarewave, Soft Squarewave, Sine Wave, Triangular wave

    Amplitude Lock EN EP Same, EN EP Independent

    Spot/Weld Timer 0.0 999 seconds

    OCV Low OCV, Normal OCV

    Stick-Stuck Check On/Off

    Lockouts Four levels

    Arc Timer 0.0 9999 hours and 0 59 minutes

    Cycle Counter 0 999,999 cycles

    Meter Calibration 0 20.0 amps 0 20.0 volts

    f

    13 10

    9

    1112

    1

    2 3 64 5 7 8

    Control Panel Parameter Values

  • UPGRADE

    1/2-in. Aluminum

    Continuous HF

    Fixed at 60 Hz

    Soft Squarewave

    496 lb. (225 kg)

    Manual Link208/230/460 V

    1-Phase

    110 A, 230 V, 1-Phase

    Some Digital Controls

    Maximum Thickness Capacity

    High Frequency Arc Starting

    AC Frequency Control(Aluminum TIG)

    AC Waveforms(Aluminum TIG)

    Weld Aluminum with Pointed Tungsten(Aluminum TIG)

    Portability

    Power Flexibility

    Line Draw at 300 Amps

    Precise Controls

    Increases aluminum thickness.

    Start Only limits HF interference issues.

    Higher frequencies provide better arc control and faster travel speeds.

    Advanced Squarewave =Travel faster

    Soft Squarewave = Maximum puddle control

    Sine Wave = Traditional characteristics

    Triangular Wave = Reduced heat input

    Waveshaping controls maintain the point. The benefits are: reduced heat input into your part, smaller weld beads, better starting and more control of the arc.

    Easier to move because of size and weight.

    Auto-Line allows the unit to operate on any voltage. 1- or 3-phase. Even generators!

    Line requirement to operate is much less. Smaller electrical service needed, smaller breaker/fuses and power cord.

    Accuracy and repeatability with all digital controls.

    5/8-in. Aluminum

    Start Only

    Variable 20400 Hz

    135 lb. (61 kg)

    Auto-