2

DYMO LetraTag 100-H

Figure 1

Space BarBackspace

Settings

Cancel

Memory SaveOK

Memory Recall

CAPs

Clear

Insert

Label Exit

Print

LCD Display

Cutter Button

Format

Navigation

Num Lock

Power

About Your New LabelmakerWith your new DYMO LetraTag™ labelmaker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different sizes and styles. The labelmaker uses DYMO LetraTag (LT) 12 mm label cassettes. LT cassettes are available in multiple colors of plastic tape and in white iron-on tape.Visit www.dymo.com for information on obtaining labels and accessories for your labelmaker.

Warranty RegistrationPlease complete the warranty registration card and return it to the appropriate Customer Support address within seven days. Visit www.dymo.com/registration for details or to register online.

Getting StartedFollow the instructions in this section to print your first label.

Connecting the PowerThe labelmaker is powered by standard batteries. To save power, the labelmaker will automatically turn off after two minutes of inactivity.

Inserting the BatteriesThe labelmaker uses four high-capacity AA alkaline batteries.

3

To insert the batteries1. Remove the battery compartment

cover. See Figure 2.

2. Insert the batteries following the polarity markings (+ and –).

3. Replace the cover.

Remove the batteries if the labelmaker will not be used for a long period of time.

Inserting the Label CassetteYour labelmaker comes with one label cassette. Visit www.dymo.com for information about purchasing additional label cassettes.To insert the label cassette1. Press and release the label cassette

cover to open the label compartment. See Figure 3.

Figure 2

Figure 3

4

2. Insert the cassette with the label positioned between the print head and pinch roller. See Figure 4.

3. Press firmly until cassette clicks into place.

4. Close the label cassette cover and press to turn on the power.

Selecting a LanguageThe first time you turn on the power, you are asked to select your desired language. By default, the language is set to English. The language option you choose determines the character set and date format that are available. To select a language1. Press .2. Use the up or down arrow keys to select Language and press .3. Use the up or down arrow keys to select the language you want and

press .

Setting the Date and TimeYou need to set the current date and time so that the date is correct if you choose to automatically insert a date on your label.

Figure 4

5

The default date and time format depends upon the language you select for the labelmaker. US English uses the date format MMM DD, YY and the 12-hour time format; all other languages use the date format DD MMM YY and the 24-hour time format.To set the date and time1. Press .

2. Use the up or down arrow keys to select Set Date, and press .

The default date is displayed.

3. Use the left or right arrow key to move the cursor over each setting (month, day, and year) and use the up or down arrow keys to increase or decrease the value.

4. When finished, press .The default time is displayed.

5. Use the left or right arrow key to move the cursor over each setting (hours and minutes) and use the up or down arrow keys to increase or decrease the value.

6. When finished, press .

6

Printing Your First LabelYou are now ready to print your first label.To print a label1. Enter text to create a simple label.2. Press . 3. Press the cutter button to cut the label.Congratulations! You have printed your first label. Continue reading to learn more about the options available for creating labels.

Getting to Know the LabelmakerBecome familiar with the location of the feature and function keys on your labelmaker. Refer to Figure 1 on the inside front cover. The following sections describe each feature in detail.

Power The button turns the power on and off. After two minutes of no activity, the power is switched off automatically. The last label created is remembered and displayed when the power is turned back on. The previously selected style settings are also restored.You can also press to cancel printing and return to edit mode.

7

LCD DisplayYou can enter up to 100 characters and spaces on a label; however, the display will only show a small portion of the characters. And, with DYMO’s exclusive graphical display, any formatting you add is visible instantly. For example, the italics and rounded border added to the text in Figure 5 are clearly displayed.

Feature indicators appear along the top of the display to let you know when a feature is selected.

CAPS ModeThe key toggles capitalization on or off. When CAPS mode is turned on, the CAPS mode indicator is shown on the display and all letters that you enter will be capitalized. The default setting is CAPS mode on. When CAPS mode is off, all letters appear in lower case.

Font size # lines CAPs Num Lock

Figure 5

8

Num LockThe key provides access to the numbers located on the A through J keys. When Num Lock mode is turned on, the Num Lock indicator is shown on the display and the numbers 1 through 0 appear when you press the letters A through J. Num Lock is turned off by default.

BackspaceThe key removes the character to the left of the cursor.

ClearThe key clears all label text and formatting.

Navigation KeysYou can review and edit your label using the left and right arrow keys on the Navigation key.You can navigate through menu selections using the up and down arrow keys, and then press to make a selection.

Cancel

The key allows you to exit from a menu without making a selection or to cancel an action.

9

Format

The key displays the font size, style, and borders submenus. These formatting features are described later in this User Guide.

Insert

The key allows you to insert symbols, a second line, or the date on your label.

Settings The key displays the Preview, Set Date, Language, and Set Print Contrast submenus. These features are described later in this User Guide.

Formatting Your LabelYou can choose from a number of formatting options to enhance the appearance of your labels.

Changing the Font SizeFive font sizes are available for your labels: Extra Small, Small, Medium, Large, and Extra Large.

10

When you select a size, that size applies to all characters on a label. To set the font size1. Press the key.2. Use the up or down arrow keys to select Size and press . 3. Use the up or down arrow keys to select the desired font size and

then press .

Adding Font StylesYou can choose from six different font styles:

When you select a style, that style applies to all characters. Styles can be used with alphanumeric characters and some symbols. To set the font style1. Press . 2. Use the up or down arrow keys to select Style and press . 3. Use the up or down arrow keys to select a font style and press .

NormalBoldItalicOutlineShadowVertical

11

Creating Two-Line LabelsYou can print a maximum of two lines on labels. To create a two-line label1. Type the text for the first line and press .2. Use the arrow keys to select Second Line and press . A multi-

line symbol is inserted at the end of the first line, but will not print on the label.

3. Type the text for the second line.

Adding the Date You can insert the date on your label. The date format is MMM DD, YY (US) or DD MMM YY (Europe) depending upon the version of your labelmaker.To insert the date1. Press .

2. Select Date and press .

12

Adding Box and Underline StylesYou can highlight your text by choosing a box or underline style.

A label can be underlined or enclosed in a box, but not both together.

To add an underline or box style

1. Press .2. Select Borders, and press .3. Select underline or a box style and press .On two-line labels, both lines are underlined. In box style mode, all the lines are enclosed in one box style.

Underline Edged

Square Train

Pointed Sweet Hearts

Rounded Flowers

Crocodile

13

Using Symbols and Special CharactersSymbols and other special characters can be added to your labels.

Adding SymbolsThe labelmaker supports the extended symbol set shown below.

14

To insert a symbol

1. Press , select Symbols, and press . The first row of symbols shown in the table appears in the display.

2. Use the arrow keys to move to the desired symbol. The left and right arrows move horizontally along a row of symbols. The up and down arrow keys scroll vertically through the rows of symbols.

3. When you locate the symbol, press to add the symbol to your label.

Adding International CharactersThe labelmaker supports the extended Latin character set using RACE technology. Similar to using a mobile phone keypad, when you hold down a letter key for longer than one second, you will scroll through variations on that letter. To insert the character, release the key when the desired character appears.For example, if French is selected as the language and you hold down the letter a, you will see and so on through all the variations available. The character variations and the order in which the variations appear depend on the language you have selected to use.

a à â æ

15

Printing OptionsYou can preview your label and adjust the printing contrast.

Previewing Your LabelYou can preview the text or format of your label prior to printing. A two-line label is previewed as a single-line label with a line break character between the two lines.To preview your label1. Press .2. Select Preview and press .The text of the label scrolls across the display.

Adjusting the Print ContrastYou can adjust the print contrast to fine tune the print quality of your label.To set the contrast1. Press .2. Select Set Contrast and press .3. Use the arrow keys to select a contrast setting and press .

16

Using Labelmaker MemoryThe labelmaker has a powerful memory feature that allows you to store the text of up to nine labels you use frequently.

Storing Label TextYou can store up to nine specific labels you use frequently.To store the current label text1. Press . The first of the memory fields is displayed. 2. Use the arrow keys to move through the fields. You can store new

text in any of the memory locations.3. Select a memory location and press .Your label text is saved and you are returned to the label.

Recalling Stored Labels You can easily recall labels stored in memory to use at a later time.To recall labels1. Press . The first memory location is displayed similar to

storing a label or format.2. Use the arrow keys to select a label to recall and press .To clear a memory field, first recall a label and then press .

17

Caring for Your LabelmakerYour labelmaker is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your labelmaker from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette.To clean the cutter blade1. Remove the label cassette.2. Place the tip of a ball-point pen

or pencil on the black post as shown in Figure 6, and press the post down.

3. While holding the post down, press and hold the cutter lever to expose the cutter blade.

4. Use a cotton ball and alcohol to clean both sides of the blade.5. Release the cutter lever.

You can also follow this procedure if the cutter blade becomes lodged in the forward position and will not move.

Press in and hold

Figure 6

!

18

19

To clean the print head Clean the print head using the cleaning tool located inside the label

compartment lid. If you do not have a cleaning tool, contact DYMO Customer Care (http://support.dymo.com).

TroubleshootingReview the following possible solutions if you encounter a problem while using your labelmaker.Problem/Error Message Solution

No display • Ensure the labelmaker is turned on.• Replace discharged batteries.

Poor Print Quality • Replace discharged batteries.• Ensure label cassette is installed properly.• Clean the print head.• Replace the label cassette.

Poor Cutter Performance Clean the cutter blade. See Caring for Your Labelmaker.

Printing No action required. Message disappears when printing is finished.

Too many charactersExceeded maximum number of characters in buffer.

Delete some or all of the buffer text.

Battery lowBatteries almost discharged. Replace batteries.

If you still need assistance, contact DYMO Customer Support (http://support.dymo.com).

Documentation FeedbackWe are constantly working to produce the highest quality documentation for our products. We welcome your feedback. Send us your comments or suggestions about our user guides. Please include the following information with your feedback:• Product name, model number, and User Guide page number• Brief description of instructions that are inaccurate or unclear, areas where more

detail is needed, and so onWe also welcome your suggestions about additional topics you would like to see covered in the documentation.Send email messages to: documentation@dymo.comPlease keep in mind that this email address is only for documentation feedback. If you have a technical question, please contact Customer Support.

Tape JamMotor is stalled due to label jam.

• Remove jammed label and replace label cassette. • Clean cutter blade.

Problem/Error Message Solution

This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards:US FCC Class B Compatibility

Safety - EN 60950, IEC 950, UL 1950 EMC Compatibility EN 61000 3-2/3; EN 61000 4-2/3/4/5/6/8/11; ENV 50204;

EU Immunity - EN 55024 & addendum A1, A2 Electromagnetic Compatibility (EMC) - Information Technology equipment, Immunity CharacteristicsEmissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6: Generic Standards - Section 3: Emission standard for residential, commercial and light industrial environments.

RoHS 2002/95/EC

20

21