Dye sublimation Dye fixation - sublimation Dye fixation ... Specifications * Unique AIT Features...
Embed Size (px)
Transcript of Dye sublimation Dye fixation - sublimation Dye fixation ... Specifications * Unique AIT Features...
Dye sublimation Dye fixation
R o t a r y H e a t T r a n s f e r M a c h i n e s
170 cm / 67
190 cm / 75
160 cm / 63
180 cm / 71
POWER INSTALLED@ 220/3PH
1450 kg / 3196 lbs
1900 kg / 4188 lbs
265 / 175 / 154 cm104 / 68 / 61
295 / 175 / 154 cm117/ 69 / 60
Oil-heated drum. Self contained with digital heat control Digital variable speed control* Automatic belt tracking Printing widths of 60 (1.5m) or 72 (1.8m) 3 unwind stations with adjustable tension * 2 rewind stations with separately controlled speed and tension Six light weight aluminum lift out bars easy-grip, 3-inch cores Self locking safety chucks for all unwind bars 3.5 LFM (1.3 LMM) production speed at 40 second dwell time 13.8 (35cm) diameter heated drum S wrap bars for fabric tensioning Hand safety protection at entrance E Stops at all corners* Lanyard controlled reversing system for safety & ease of feeding* Dual Safety Reversing Systems* Low maintenance, brushless drive motor * All electronic controls. No air required* Automatic cool down at shut down
* Unique AIT Features
Unwind blotting paper
265 - 295 cms 110 cms (43)
163.5 cms (64) 104 - 116
The new oil heated 7400 IJO SPORT series rotary heat press has been specifically designed to meet the increasing demand for cut part digital printing.This method is widely used to print sport and team apparel.The new oil heating system guarantees a uniform heat distribution across the width of the drum with a minimum of energy consumtion. This system uses 50% less energy than electrically heated presses. The 13.8 (35 cm) diameter drum is suitable in production speed for digital printing.
7400 IJO SPORT series has 3 different options of operation:
The transfer paper is placed design side up on the table and feeds continuously into the machine. The pre-cut parts are placed on the design and registered with maximum ease. The spent print paper and the printed parts exit via a variable speed conveyor.
The transfer paper is fed continuously into the machine and cut fabric parts are placed on to the design areas. In this case the used transfer paper is re-rolled continuously under the feed table and the printed parts are released on to the variable speed exit conveyor.
Continuous printing roll-to-roll on both print paper and fabric.
The top feeding hot oil calender system will eliminate seconds caused from fabric shrinking or paper movement and increase production, saving money and energy costs. High production, quality printing and our service after the sale give you the best of reasons to invest in AIT for all of your needs in digital sublimation printing.