DW SERIES Shredders - Doppstadt · DW SERIES Shredders DW 2060 K ... Exchange of shredding drum ......
Transcript of DW SERIES Shredders - Doppstadt · DW SERIES Shredders DW 2060 K ... Exchange of shredding drum ......
DW SERIESShredders
DW 2060 KDW 3060 - Type F
DW 3060 K - Type F
The ALL-IN-ONE SOLUTION in combination with
HS 401 HS 800
More flexible than ever!
2017
-02-
RO
W
Log timber
Logs and roots
DW 2060 K It’s fast and simple: change the roller
of the DW 2060 K with a flick of the
wrist – and your output rates rise up to
levels typically reserved for high-speed
shredding machines.
DW SERIES:
Green waste
DW 3080 K3 A 3 m long roller rotating at
25 rpm and a variety of
additional equipment, e.g.
magnets for iron separation,
make the DW 3080 K3 the
best solution for shredding
tasks that require full attention.
Waste wood / Pallets
Bulky waste / Waste wood Plastic waste
Residual / Industrial waste
Werner Doppstadt Umwelttechnik GmbH & Co. KG
Steinbrink 13 42555 Velbert Germany Phone: +49 (0)2052 889-0 Fax: +49 (0)2052 889-144 E-Mail: [email protected] Internet: www.doppstadt.com
YOU ALSO CAN GET THE ENGINES FOR ALL MODELS OF THE DW SERIES ACCORDING THE EUROMOT IIIA EXHAUST SYSTEM. - WE ARE HAPPY TO ADVISE YOU.
Best Solution. Smart Recycling.
Best Solution. Smart Recycling.
DW SERIES
SLIP-ON COUPLINGMachines equipped with drawbar coupling
can be moved by gripper of wheel loader
HYDRAULIC SELF-PROPELLED DRIVE
Perfect handling characteristics
in any working environment
MULTIFUNCTIONAL CONTROLLER 18-channel wireless remote control
for machine operation from
outside the dangerous zones
(e.g. from wheel loader)
Exact adjustment/reading of
machine data via multifunctional
controller
REAR DISCHARGE CONVEYOR
Large discharging
area for efficient
material discharge
MAINTENANCE
Large doors for easy maintenance
access to engine, gearbox and tank
CONTROL AND DISPLAY PANEL easy handling
exact adjustment/reading of
machine data via multifunctional
controller
operation via wireless remote
control
FEEDING HOPPER, ROLLER, SHREDDING COMB Efficient tearing of material with the aid of hydraulic shredding comb
Enhanced operational safety and wear protection through automatic opening
of comb, if large and unshreddable material and contamination is inside the waste pile
DoppLock appliance for quick and easy exchange of wear parts
*Optional equipment Annotations and illustrations using the example of the DW 3060 shredder
QUICKCHANGE SYSTEM: Exchange of shredding drum
including bearing shield
No interference with power unit
or gearbox
OVERBAND MAGNET*
Fe-separation by the way of overband
magnet* or magnetic drum*.
OVERLOAD PROTECTION SYSTEM Ensures continuous shredding
through automatic process
interruption in case of over-
load or contamination with
unshreddable, oversized
material
THE INNOVATIVE SHREDDING SYSTEM - versatile in use
The Variomat comb system made by Doppstadt is
perfectly prepared for almost any kind of material.
Thanks to the new Quickchange method the shredding
rollers are quickly and easily replacable. The patented
DoppLock tooth fixing unit ensure a secure holding of the
tool and a long service life thanks to special high-strength
steel.
SHREDDING DRUM
A wall thickness of up to 40 mm and
the quick-changing device make for
maximum robustness
and flexibility.
DOPPLOCK SYSTEM The self-retaining fixing system is designed
to sustain very high stress. The lock
screw only offers protection against loss. TOOTH BAR
Tool-free exchange
of tooth bar
ANTI-CONTAMINANT SYSTEM „LIMITER“ FOR FINE SHREDDING
The DW 2060 K, DW 3060 Type F and the
DW Ceron series applies the new „Limiter“
unit. The system combines the advantages of
the comb extensions with those of the grating
basket. Being able to move in all directions,
the gimbal-mounted Limiter successfully
dodges all kinds of contamination. Further-
more can also be used the conventional comb
extensions.
TECHNICAL DATA DW 3060 & DW 2060 K
Model DW 3060 DW 3060 K DW 2060 K
Total weight 25.000 kg (55,116 lb) 30.000 kg (66,139 lb) 20.000 kg (44,092 lb)
Chassis Center-axle trailer chassis for 80 km/h (50 mp/h) with ABS (Anti-lock braking system)
Track-mounted chassis, self-propelled with two speeds
Track-mounted chassis
Drive Diesel engine Diesel engine Diesel engine
Type MTU 6R1300* Mercedes-Benz OM 460 LA
MTU 6R1300* Mercedes-Benz OM 460 LA
Mercedes-Benz Mercedes-Benz OM 926 LA OM 926 LA
Power 320 kW (435 hp) 315 kW (428 hp) at 2.000 rpm at 2.000 rpm
320 kW (435 hp) 315 kW (428 hp) at 2.000 rpm at 2.000 rpm
240 kW (326 hp) 240 kW (326 hp) at 2.000 rpm at 2.000 rpm
Exhaust level EUROMOT IV EUROMOT III A EUROMOT IV EUROMOT III A EUROMOT III B EUROMOT III A
Cubic capacity 11.970 cm3 11.970 cm3 7.200 cm3
Fuel tank 600 l (159 gal) 600 l (159 gal) 300 l (79 gal)
Shredding drum
Length 3.000 mm (9’10”) 3.000 mm (9’10”) 2.000 mm (6’7”)
Diameter 600 mm (1’12”) 600 mm (1’12”) 600 mm (1’12”)
Shredding drum speed 31 rpm 31 rpm 27 rpm
Tooth width/length 60 mm/174 mm (Size L) (2.4”/ 6.9”) 60 mm/174 mm (Size L) (2.4”/ 6.9”) 60 mm/174 mm (Size L) (2.4”/ 6.9”)
Tooth number 21 21 28
Comb unit
Tooth width 60 mm (Size L) (2.4”) 60 mm (Size L) (2.4”) 60 mm (Size L) (2.4”)
Tooth number 20 (Size L) 20 (Size L) 13 (Size L)
Conveyor belt Lower belt Rear conveyor Lower belt Rear conveyor Lower belt Rear conveyor
Width 1.000 mm (3’3”) 1.200 mm (3’11”) 1.000 mm (3’3”) 1.200 mm (3’11”) 800 mm (2’7”) 1.000 mm (3’3”)
Length 3.335 mm (10’1”) 5.500 mm (18’5”) 3.335 mm (10’1”) 7.000 mm (23’) 2.410 mm (7’11”) 5.000 mm (16’5”)
Belt speed m/s (ft in/s) 2,8 (9’2”) 3,0 (9’10”) 2,8 (9’2”) 3,0 (9’10”) 2,8 (9’2”) 3,0 (9’10”)
Discharge height 3.300 mm (10’10”) 4.046 mm (13’3”) 3.020 mm (9’11”)
Standard equipment Roller tooth (Size L) 174 mm C, armored comb tooth, additional hydraulic connection 20l/min.
Roller tooth (Size L) 174 mm C, armored comb tooth, wireless remote control, moistening device, additional hydraulic connection 20l/min.
Roller tooth (Size L) 174 mm C, armored comb tooth, wireless remote control, additional hydrau-lic connection 20l & 40l/min., BioPower package
Optional equipment Fine-shredding system „Limiter“, comb „Variomat“, additional hydraulic connection 70l/min., Classic package, wireless remote control, self-propelled drive, overband magnet, magnetic drum, cover plates for feeding hopper, winter equipment package, LED lighting package
Fine-shredding system „Limiter“, comb „Variomat“, magnetic drum (permanent), antimagnetic driven drum, overband magnet, cover plates for feeding hopper, LED lighting package, central lube system
Fine-shredding system „Limiter“, comb „Vario-mat“, magnetic drum (permanent), antima-gnetic driven drum, overband magnet, cover plates for feeding hopper, additional hydraulic connection 70l/min.
BioPower option: More powerful drive train (larger gearing), nominal output: 360 kW (490 hp) at 2.000 min-1, rpm of shredding drum: 28 min-1
Info
rmat
ion
as o
f Jun
e 20
17 –
sub
ject
to m
odifi
catio
ns. A
ll di
men
sion
s in
mm
. Inf
orm
atio
n sh
ould
be
cons
ider
ed a
ppro
xim
ate.
Figu
res
and
spec
ifica
tions
may
incl
ude
optio
nal a
nd s
peci
al e
quip
men
t no
t in
clud
ed in
sta
ndar
d eq
uipm
ent.
* MTU engines based on established engine technology by Mercedes-Benz. To connect HS Selector systems, additional equipment is required.
DW 3060 K TYPE F Moved by a robust two-speed crawler track with
replaceable chain links, the DW 3060 K TYPE F
yields high throughput rates, which usually are
only expected from high-speed shredders, even
on rough terrain.
SHREDDING PACKAGES Shredding drum + Tooth Bar + Limiter (if required)
DW 2060 K Looking for a shredding solution
that produces finished material
of highest quality and purity?
We have it: the DW 2060 K.
PACKAGE*** SIZE XL (600/2) DW 3060 K only SIZE L (600/3) SIZE L (600/4)
BioPower SIZE M (800) SIZE S (800)*Type Shredding drum
equipped with14 teeth
Shredding drum equipped with21 teeth
Shredding drum equipped with42 teeth
Shredding drum equipped with125 teeth
Shredding drum equippedwith 95 / 115 oder 145 teeth,depending on drum length
Diameter 600 mm (1’12”) 600 mm (1’12”) 600 mm (1’12”) 800 mm (2’7”) 800 mm (2’7”)
Tooth height 170 mm (6.7”) 174 mm (6.9”) 174 mm (6.9”) 100 mm (3.9”) 60 mm (2.4”)
Limiter 15 x Limiter XL 600 (15 comb teeth)
20 x Limiter L 600 (20 comb teeth)
20 x Limiter L 600 (20 comb teeth)
26 x Limiter M 800(26 comb teeth)
30 x Limiter S 800 (30 comb teeth)
Main fields of application
heavy garbage garbage/roots green waste/waste wood waste wood/bulk garba-ge (to a limited extent)
waste wood only**
Size XL, Size L, Size L BioPower can also be used withconventional comb extensions
* available from 3rd quarter 2017 for DW 3060 and themodels DW 206 / 256 / 306 Ceron** including digger unit, or as 2nd increment*** for DW 2060 K / DW 3060 / DW 206 / 256 / 306 Ceron
STAR SCREEN HS SELECTOR HS 401 • HS 800 TECHNICAL DATA HS SELECTOR
Info
rmat
ion
as o
f Sep
tem
ber
2017
– s
ubje
ct to
mod
ifica
tions
. All
dim
ensi
ons
in m
m. I
nfor
mat
ion
shou
ld b
e co
nsid
ered
app
roxi
mat
e.Fi
gure
s an
d sp
ecifi
catio
ns m
ay in
clud
e op
tiona
l and
spe
cial
equ
ipm
ent
not
incl
uded
in s
tand
ard
equi
pmen
t.
The ALL-IN-ONE SOLUTION in combination with DW 3060 Type F
The ALL-IN-ONE SOLUTION in combination with DW 2060 K or DW 3060 Type F
NO MORE TROUBLE WITH UNDESIRED OVERSIZE GRAIN
Still fine enough or too coarse? In any material fraction there
are particles eluding classification. In this case, it’s always
good to have the star screen systems of the HS SELECTOR
series at hand, since they thoroughly extract the troublesome
contaminants. Combined with the fine shredding systems
DW 3060 Type F or DW 2060 K the SELECTOR is a compact,
efficient and economic solution for shredding and screening
purposes: DoppCut.
The combination perfectly fits all kinds of scenarios. For
example, the shredder reduces bio mass and waste wood to
the required grain sizes.
Then the oversize grain separator detects leftover particles and
transports the unwanted fraction back to the shredding process.
As a result, the finished product is free of oversize.
Modell HS 401 HS 800
Total weight 6.500 kg (14,330 lb) 9.200 kg (20,283 lb)
Chassis Hooklift Hooklift
Antrieb Hydraulic system for connection with DW shredder with additional hydraulic connection of 70 l/min.
Hydraulic system for connection with DW shredder with additional hydraulic connection of 70 l/min.
Dimensions
Length 8.700 mm (28’7”) 16.000 mm (52’6”)
Width 6.700 mm (21’12”) 2.750 mm (9’0”)
Height 4.900 mm (16’1”) 4.500 mm (14’9”)
Transport length 6.700 mm (21’12”) 7.900 mm (25’11”)
Transport width 2.550 mm (8’4”) 2.550 mm (8’4”)
Transport height 2.900 mm (9’6”) 2.700 mm (8’10”)
Conveyor belt
Belt speed m/s (ft in/s) 1,1 (3’7”) 1,1 (3’7”)
Screen deck
Fine screen deck length 3.500 mm (11’6”) 5.900 mm (19’4”)
Fine screen deck width 1.300 mm (4’3”) 1.400 mm (4’7”)
Standard equipment Hooklift-mounted for transportation by truck. Two rubber-tired wheels and trailer ball hitch for maneuvering with a wheel-loa-der. Integrated discharge belt conveyor for fine/oversized mate-rial. Inlet belt conveyor to star screen deck. Star screen deck at buyer’s option.
Hooklift-mounted for transportation by truck. Two rubber-tired wheels and trailer ball hitch for maneuvering with a wheel-loa-der. Integrated discharge belt conveyor for fine/oversized material. Integrated two-part return belt conveyor for oversized material, foldable for transport. Star screen deck with two separate segments, independently maneuverable, tool-free exchange of screen deck.
Optional equipment Screen deck MScreen deck L exactScreen deck LScreen deck XL
Removable screen deck L Removable screen deck L exact
Range of application The combination of the HS SELECTOR 401 with the shredder DW 2060 K or DW 3060 Type F provides you with a versatile ALL-IN-ONE solution for your recycling and screening requirements. The system is perfectly suited for processing waste wood and bio mass.
The HS 800 blends in particularly well with the shredder DW 3060 Type F (Package Size M or Size S). The machine can be used for extracting oversized material from pre-processed waste wood, root wood, and green waste.
HS 401 SELECTOR
HS 800 SELECTOR