Dust Collector for Mica Undercutters-dsh0
-
Upload
ferozmujawar -
Category
Documents
-
view
217 -
download
1
description
Transcript of Dust Collector for Mica Undercutters-dsh0
-
System Horsepower 1.0 HP CFM (Maximum) 98 cfm Vacuum (Maximum) 50 S.P. Voltage/Phase 115/1 or 220/1 Dimensions (LxWxH) 18 x 21 x 51 Storage (US Gallon) 9.0 Noise Level @ 3 ft. 78 dBa Weight 145 lbs.
Model 011885-1 for 115 V, 1 Ph. Model 011885-2 for 220 V, 1 Ph.
TEL: (717) 637-5988 FAX: (717) 637-9329 215 Philadelphia Street, Hanover, PA 17331 USA
caminnovation.com custom-taping-machines.com
The Dust Collector is specifically designed for fast, efficient operation as well as dependable performance in a compact size. This powerful yet quiet vacuum increases your productivity where intermittent duty vacuums fail. It is very effective when used with the specially designed dust collector nozzle on CAMs line of mica undercutters. Common Features:
Continuous duty regenerative vacuum producer
TEFC 3600 rpm high efficiency motor Heavy duty cloth filter Filter efficiency of 99.99% @ 2.0 microns,
standard Motor for 50 or 60 cycle aluminum blower and impeller Discharge filter silencer Powder coat finish paint 15 ft. hose, 1 hose ID
Dust Collector for Mica Undercutting