Dti pab

Presented By:Management System Accreditation

Philippine Accreditation Bureau

Philippine Accreditation Bureau (PAB)

Philippine Accreditation Bureau (PAB) Brief Background

A spin-off from the Bureau of Product Standard (BPS)

In 2006, ISO/IEC 17011:2004, the international standards for operation of accreditation bodies, no longer allows accreditation bodies to also do certification, testing and other services that it accredits.

It is viewed as conflict of interest. A centralized accrediting office independent from BPS needs to be created.


Accreditation bodies not conforming to ISO/IEC 17011 will not be accepted into the MLA/MRA of the Pacific Accreditation Cooperation (PAC), Asia Pacific Laboratory Accreditation Cooperation (APLAC) and the International Laboratory Accreditation Cooperation (ILAC).

By virtue of Department of Trade and Industry Administrative Order (DAO) No. 04:2006, the Philippine Accreditation Office (PAO), was created and mandated to handle the accreditation of certification bodies, inspection bodies, testing, and calibration laboratories.


The Philippine Accreditation Office shall be the central body to accredit inspection, testing and certifying bodies and other bodies offering conformity assessment services needed by the country (Executive Order No. 802 series of 2009)

MandateMandate


17 October 2013 DTI Rationalization Plan was approved.

DTI Rationalization Plan DTI Rationalization Plan E.O No. 366 dated 4 October 2004E.O No. 366 dated 4 October 2004

Philippine Accreditation Office will have a new organizational name Philippine Accreditation Bureau.


Legal Basis for PAB’s Creation/Existence RA 9236:2003 National Metrology Act of 2003

(Strengthened and Recognized the laboratory accrediting body attached to DTI as national accreditation body) DAO 4:2006 Transfer of accreditation function from BPS to Philippine Accreditation Office E.O. 802:2009 (Signed by PGMA)

Strengthening and Recognizing the Philippine Accreditation Office (PAO) as the national accreditation body for Conformity Assessment Bodies (testing, inspection and

certification)

PAO Functional Structure

PAB Council : : Philippine Accreditation Bureau CouncilPAB : Philippine Accreditation BureauTCAC : Testing and Calibration Advisory CommitteeMSAC : Management System Advisory CommitteeIBAC : Inspection Body Advisory CommitteeMSA : Management System AccreditationLA : Laboratory AccreditationAEP : Accreditation Evaluation PanelLAC : Laboratory Accreditation CommitteeLATC : Laboratory Accreditation Technical Committee

PAB Council

PABDirector

CWBRG

MSAC

IBAC

AEP

Promotion Division

TCAC

LACQuality

Manager

Appeals Committee

LATC

LA Division Manager

MSADivision Manager

Assessors/ExpertsPool

Accreditation Officer

DCO

Assessors/ExpertsPool

Accreditation Officer

DCO


Functions:

National Accreditation Body for conformity assessments and related bodies

Run accreditation schemes for existing conformity assessment bodies

Give recognition to conformity assessment results, certification bodies, laboratories and related bodies


Achieve signatory status in regional/ international Mutual or Multilateral Recognition Arrangements (MRA or MLA)

Strengthen the technical infrastructure in the country through provision of reliable conformity assessment results thereby making Philippine products competitive in both domestic and foreign markets


Scope of accreditation service

Certification bodies for the following: QMS, EMS, HACCP, Product Certification, Personnel Certification, FSMS

Laboratory Accreditation Testing (all fields), calibration, medical testing Inspection

ISO/IEC 17011:2004 Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment Bodies

ISO/IEC 17011:2004 Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment BodiesManagement System Accreditation

ISO/IEC 17021:2011 Conformity Assessment – Requirements for Bodies Providing Audit and Certification of Management Systems

ISO/TS 22003 Food Safety Management System – Requirements for Bodies Providing Audit and Certification of Food Safety Management Systems

ISO/IEC 17024:2004 Conformity Assessment –General Requirements for Bodies

Operating Certification of PersonsISO/IEC 17065:2012 - Requirements for

bodies certifying products, processes and services

HACCP-CODEX - CAC/RCP 43R-1995

Standards used in accreditation

PNS ISO/IEC 9001:2008 Quality Management System – RequirementsPNS ISO/IEC 14001:2004 Environmental management systems - Requirements with guidance for useISO 22000:2005 Food Safety Management System – Requirements for any organization in the food chain

PNS ISO/IEC 9001:2008 Quality Management System – RequirementsPNS ISO/IEC 14001:2004 Environmental management systems - Requirements with guidance for useISO 22000:2005 Food Safety Management System – Requirements for any organization in the food chain



Laboratory AccreditationISO/IEC 17020:2012 General Criteria for the

Operation of Various Types of Bodies Performing Inspection

ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories

ISO 15189:2007 Medical Laboratories – Particular requirements for quality and competence.


Accreditation and Certification Accreditation Third-party attestation related to a conformity assessment body conveying formal demonstration of its competence to carry out specific conformity assessment tasks.

CertificationProcedure by which a third party gives a written assurance that a product, process or service conforms to specified requirements.


Benefits of Accreditation

Provides credibility and confidence to results of conformity assessment activities

Contributes to better consumer protection as accuracy of data generated is ensured

Improves acceptance of conformity assessment certificates within the country or abroad thus avoiding unnecessary costly repetitive activities

Boosts image of a CAB that provides certification services.

Worldwide Recognition and AcceptancePAB is signatory to the MLA/MRA of:

Pacific Accreditation Cooperation (PAC) Date of Signing: QMS 07 August 2002 EMS 12 July 2007

Asia-Pacific Laboratory Accreditation Cooperation (APLAC)

Date of Signing: Testing 15 November 2005

International Laboratory Accreditation Cooperation (ILAC) Date of Signing: Testing 16 November 2005



Benefit from MLA/MRA

Certificate issued by a PAB-accredited body is recognized as equivalent to a certificate issued by an accreditation body in any of the countries which are signatories to the MRAs/MLAs.

“Certified once—accepted everywhere”

Level of EvaluationLevel of Evaluation

Accredited CertificationAccredited Certification

Accreditation Body

Accreditation Body

Product Certification to ISO/IEC 17065:2012 and Scheme Rules

Product Certification to ISO/IEC 17065:2012 and Scheme Rules

Supplier who must ensure Compliance with Scheme

Rules and Product Standard

Supplier who must ensure Compliance with Scheme

Rules and Product Standard

May mark Compliant Product under

License Agreement

May mark Compliant Product under

License Agreement

Product (perhaps marked) complies with product

Standard

Product (perhaps marked) complies with product

Standard

AccreditsAccredits

MarkMark

Compliance Compliance

Certifies (May Issue License Agreement

Certifies (May Issue License Agreement

Accredited CertificationAccredited Certification

IAF/PAC Signatory

IAF/PAC Signatory

Product Certification

Bodies


Bodies

SupplierSupplier

ACCREDITSACCREDITS

CERTIFIESCERTIFIES

IAF/EA Signatory

IAF/EA Signatory


Bodies


Bodies

SupplierSupplier

ACCREDITSACCREDITS

CERTIFIESCERTIFIES

CO

NFI

DEN

CE

CO

NFI

DEN

CE

CO

NFI

DEN

CE

CO

NFI

DEN

CE

MUTUAL RECOGNITION

MUTUAL RECOGNITION ISO/IEC

17011 ISO 19011

ISO/IEC 17011 ISO

19011

ISO/IEC 17065

Scheme Rules

ISO/IEC 17065

Scheme Rules

Scheme Rules and Product

Standards

Scheme Rules and Product

Standards

Management System Accreditation Process

Corrective Action by Applicant

Corrective Action by Applicant

EvaluateCorrective Actions

EvaluateCorrective Actions

Revise ManualRevise Manual

Organize Assessment Team/Select Experts

Organize Assessment Team/Select Experts

Document ReviewDocument Review

ACCEPTABLEACCEPTABLE

Initial AssessmentStage 1 – Assessment of CB and its management system.Stage 2 – Competence assessment of CB’s auditors during actual audits.

Initial AssessmentStage 1 – Assessment of CB and its management system.Stage 2 – Competence assessment of CB’s auditors during actual audits.

SatisfactoryOutcome

SatisfactoryOutcome

Grant AccreditationGrant Accreditation

Surveillance AssessmentSurveillance Assessment

Renewal Assessment (every 5 years)

Renewal Assessment (every 5 years)

NO

YES

NO YES

ApplicationApplication

Dti pab

Documents

Transcript of Dti pab