DT-Msuperpro.com/-/media/selkirk/reference-documents/common/... · 2016-06-07 · DT-M...

1
DT-M Direct-Temp ® for Multi-Fuel c-UL-us Listed One-inch clearance for installations in stud walls or floor spaces. Concentric venting speeds installation with exhaust & intake through one vent. Constructed of AL 29-4C® with built-in seal. ALL NEW! Selkirk Direct-Temp ® Multi-Fuel Appliance Venting Solution BIO-FUEL ALTERNATIVES Corn Hulled wheat Soy beans Olive pits Cherry pits Bio-mass fuel grains Processed silage Grass pellets Waste paper pellets Features: SURE SEAL Direct-Temp for Multi-Fuel Stoves (DT-M) is a unique venting system designed to address the problem of highly corrosive flue gases produced by burning corn or other bio-fuels. Converts any conventional corn-burning or multi-fuel stove into a Direct Vent system. DT-M 3x5 and 4x7 systems easily connect to 3” or 4” flue outlets. No RTV We’ve combined our proven EZ Seal gasket tech- nology with years of experience in special stainless steel fabrication to give you an easy-to-install vent system with a strong positive seal that’s able to handle both positive and negative pressure direct venting applications. Dual Use: Conventional or Concentric Venting Selkirk’s DT-M provides more than just a laser-weld- ed double-wall system made from the toughest al- loys. It also supports concentric venting, exhausting flue gases through the inner conduit while taking in combustion air through the annular space be- tween the flue and the outer jacket. The combined flue exhaust/combustion air intake eliminates the need for two separate penetrations through the wall or roof. Cut only one installation hole, install necessary hangers once, install one termination/air intake. One-Inch Clearance To Combustibles The airspace between the inner flue gas conduit and the outer jacket considerably reduces the required clearance to combustible materials. This enables Selkirk’s DT-M to be easily installed in con- fined spaces. Saf-T Vent DT-M is engineered from the appliance vent adapter to the outside termina- tion with a full array of parts that meet or exceed appliance manufacturers’ recommendations. DT-M is part of the complete line-up of Direct-Temp venting products: Direct-Temp/Gas Fireplaces & Stoves Direct-Temp/Pellet Stoves Direct-Temp/Multi-Fuel Stoves

Transcript of DT-Msuperpro.com/-/media/selkirk/reference-documents/common/... · 2016-06-07 · DT-M...

Page 1: DT-Msuperpro.com/-/media/selkirk/reference-documents/common/... · 2016-06-07 · DT-M Direct-Temp® for Multi-Fuel • c-UL-us Listed • One-inch clearance for installations in

DT-MDirect-Temp® for Multi-Fuel

• c-UL-us Listed

• One-inch clearance for installations in stud walls or floor spaces.

• Concentric venting speeds installation with exhaust & intake through one vent.

• Constructed of AL 29-4C® with built-in seal.

ALL NEW!Selkirk Direct-Temp® Multi-Fuel Appliance Venting Solution

BiO-FUeL AlternAtives• Corn• Hulled wheat• Soy beans• Olive pits• Cherry pits

• Bio-mass fuel grains• Processed silage• Grass pellets• Waste paper pellets

Features:SURE SEAL

SURE SEAL

• Direct-TempforMulti-FuelStoves(DT-M)isauniqueventingsystemdesignedtoaddresstheproblemofhighly corrosivefluegasesproducedbyburningcornorotherbio-fuels.• Convertsanyconventionalcorn-burningormulti-fuelstoveintoaDirectVentsystem.• DT-M3x5and4x7systemseasilyconnectto3”or4”flueoutlets.

No RTVWe’vecombinedourprovenEZSealgaskettech-nologywithyearsofexperienceinspecialstainlesssteelfabricationtogiveyouaneasy-to-installventsystemwithastrongpositivesealthat’sabletohandlebothpositiveandnegativepressuredirectventingapplications.

Dual Use: Conventional or Concentric VentingSelkirk’sDT-Mprovidesmorethanjustalaser-weld-eddouble-wallsystemmadefromthetoughestal-loys.Italsosupportsconcentricventing,exhaustingfluegasesthroughtheinnerconduitwhiletakingincombustionairthroughtheannularspacebe-tweentheflueandtheouterjacket.Thecombinedflueexhaust/combustionairintakeeliminatestheneedfortwoseparatepenetrationsthroughthewallorroof.Cutonlyoneinstallationhole,installnecessaryhangersonce,installonetermination/airintake.

One-Inch Clearance To CombustiblesTheairspacebetweentheinnerfluegasconduitandtheouterjacketconsiderablyreducestherequiredclearancetocombustiblematerials.ThisenablesSelkirk’sDT-Mtobeeasilyinstalledincon-finedspaces.Saf-TVentDT-Misengineeredfromtheapplianceventadaptertotheoutsidetermina-tionwithafullarrayofpartsthatmeetorexceedappliancemanufacturers’recommendations.

DT-Mispartofthecompleteline-upofDirect-Tempventingproducts:•Direct-Temp/GasFireplaces&Stoves•Direct-Temp/PelletStoves•Direct-Temp/Multi-FuelStoves