Network 1 Setup (home) [DStv South Africa @ PAS 7/10]Signal Setup: EnabledOrbital Position: PAS7/10Use NIT: YesFrequency: 10970Symbol Rate: 30000Polarisation: VerticalFEC: 5/6 - See more at: http://forums.bulawayo24.com/showthread.php?tid=96#sthash.VOp8fm1s.dpuf

Set Frequency to "11170" Set Symbol Rate to "26652 Set Polarization to "Vertical" Set FEC to "5/6" Select "Accept these settings"Step 3: Select "Network 3 Setup" Set Signal Setup to "Enabled" Set Frequency to "11625" Set Symbol Rate to "15000 Set Polarization to "Vertical" Set FEC to "3/4" Select "Accept these settings"Step 4: Select "Network 4 Setup" Set Signal Setup to "Enabled" Set Frequency to "11674" Set Symbol Rate to "26652 Set Polarization to "Vertical" Set FEC to "5/6" Select "Accept these settings"Step 5: Select "Network 5 Setup" Set Signal Setup to "Enabled" Set Frequency to "12522" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2" Select "Accept these settings"Step 6: Select "Network 6 Setup" Set Signal Setup to "Enabled" Set Frequency to "12562" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2" Select "Accept these settings" Step 7: Select "Network 7 Setup" Set Signal Setup to "Enabled" Set Frequency to "12682" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2" Select "Accept these settings"Step 8: Select "Network 8 Setup" Set Signal Setup to "Enabled" Set Frequency to "12722" Set Symbol Rate to "26657 Set Polarization to "Vertical" Set FEC to "1/2" Select "Accept these settings"

STV / Open Source / Vivid Decoder Global settings for SA and surrounding countries

Here are the settings:On your decoder's remote control pressMenubutton.Go toAdvanced Options. Press OK.SelectDish Installations. Press OK.Type PIN no:9949.OnNetwork 2use right arrow; change toDSTV IS20orDSTV Pas7Press OK.Change the following settings:Frequency: Press OK and type in:11514. Press OK.Symbol Rate: Press OK and type in:28750. Press OK.FEC: Right Arrow: Change to1/2. Press OK.Polarization: Right arrow: Change toVertical.Use NIT: Right arrow: Change toYes.Accept all display settings and leave screen: PressOK.Now go toNetwork 3.OnNetwork 3: Right arrow: Change toDSTV IS20orDSTV Pas7Press OKChange the following settings:Frequency: Press OK and type in:11674. Press OK.Symbol Rate: Press OK and type in:28800. Press OK.FEC: Right Arrow: Change to7/8. Press OK.Polarization: Right arrow: Change toVertical.Use NIT: Right arrow: Change toYes.Accept all display settings and leave screen: PressOK.Press Exit. The decoder will reboot automaticallyAfter the scan has completed, press the [TV] button on your remote select [Public IS7/10] and press [OK] Look for a channel namedAlex TV.To return to normal DSTV Bouquet (Multi-choice Channels) after viewing Alex TV, simply press the [TV] button on your remote and select [DSTV]...There you go.