1

Bachelor of Design Innovation – First Year Design

DSDN104

Digital Creation Course outline Trimester 2, 2011

GENERAL

Core (Industrial), Elective (Culture+Context, Media); Trimester Two; 15 points ASSESSMENT

100% internal by assignment

CLASSTIMES AND LOCATIONS

LECTURES*: All Streams Tuesday 14:40pm –15:30pm Room: LT1 STUDIO: Stream A Tuesday 15:40pm –18:30pm Room: VS322 Stream A Thursday 15:40pm –18:30pm Room: VS322 Stream B Tuesday 15:40pm –18:30pm Room: VS319 Stream B Thursday 15:40pm –18:30pm Room: VS319 * On selected Tuesdays only

COORDINATOR AND TUTORS

Coordinator Tutors Jeongbin Ok Room: WIG 405 Phone: 463-6278 Office Hours: Wed 2-4 pm (or by appointment) Email: Jeongbin.Ok@vuw.ac.nz

1. Earl Stewart Email: find.earlstewart@gmail.com 2. Richard Borrett Email: rich.borrett@gmail.com Room: WIG 302 Office Hours: to be confirmed with tutor

2

COURSE SYNOPSIS

This course introduces students to generic concepts, practices and theories of the use of computers in design. It will consider the similarities and distinctions between manual and digital techniques as well as developing potential overlaps, while also investigating the various possibilities of design

AIMS OF THE COURSE This course aims to empower students with a range of drawing methods specific to the analysis and representation of 3D form and space, while using various computer software and hardware applications to create innovative objects. While students use these methods and applications they will become acquainted with a basic understanding of design-specific vocabulary; with a personal priority and response with a statement of intent; with methods of thinking, observing, exploring, challenging, making, reflecting, and above all committing to design ideas and their realisation in a concrete language of design elements.

COURSE LEARNING OBJECTIVES

Knowledge By the end of the course, students will have learned to: • Create and organise ideas and thoughts in response to design challenges • Utilise computer-based 2D and 3D design techniques as a handy and efficient method of incarnating design

intent in graphical and physical forms • Demonstrate and propagate design initiative and development process using both verbal and digital ways • Understand and practise the whole design workflow including from ideation to rapid prototyping Creative & Critical Thinking By the end of the course, students will have learned to: • Respond to a design brief by resolving programmatic, formal and functional demands • Reinforce critical design explorations with ideas/precedents and foundations that build up complexity • Acquire a firm understanding of the problems and needs of experience design challenges and the manners in

which they may be addressed • Use innovation, imagination and lateral thinking to translate critical design issues (composition, aesthetics,

identity, meaning, perception, sensitivity to context, response to needs) into digital media project concepts • Understand how well-considered presentation styles can enhance a design idea and its impact Communication By the end of the course, students will have learned to: • Convincingly communicate design concepts in digital formats • Engage digital media design-specific knowledge and vocabulary • Speak to personal design ideas with confidence and present ideas in a structured & convincing way • Respond to design questions with clarity and insight Leadership By the end of the course, students will have learned to: • Have an evolving yet firm commitment towards design, and to demonstrate that commitment through a

willingness to explore design concepts, develop design skills, and produce coherent and expressive design products

• Challenge traditional preconceptions of digital media design, while engaging the requisite skills, realities, limitations, and potentials of digital media design.

• Incorporate digital media design–specific pragmatic factors (structural, technical, human, contextual) into a poetic, sensitive, aesthetic design response.

• Understand the responsibilities of the profession, and the potential these afford for creative design, innovative problem-solving, and the poetic expression of personal convictions

COURSE CONTENT

In DSDN104 students will use various computer software and hardware applications to create innovative objects. DSDN104 is an experiment based course. It therefore privileges trial and error, testing and retesting, along with multiple attempts. Computer software lends itself to this approach. You will find that making copies and multiple versions of objects is much easier with this medium than almost all other physical methods.

3

You'll also find that if you try hard enough you can make a piece of software do things its designers never intended from it. One implication of this is as you move through the stages of concepts to developed design and through multiple representations you'll benefit from using an entire suite of software. Another implication is that you probably won't be using the same software in ten (or even five) year's time that you use today. The two most important things that we aim to achieve in DSDN104 are, one: instilling in every student a desire to explore the potential of digital media in their design work and a passion for their outcomes, and two: the ability to learn and take advantage of new software and hardware applications.

COURSE DELIVERY

All students will be attending the lectures on selected Tuesdays at 2:40 - 3:30 pm in LT1. In the lectures students will be introduced to the briefs for each of the three experiments and will be shown inspirational imagery relating to each stage of the experiments as they progress. The lectures are an opportunity to draw your attention to work from the world’s best designers and to show you how you might be able to take advantage of their experiences in your own work. The lectures are also the most direct way to engage with all of you at once. This means that they are the best way to pass on new strategies for excelling in DSDN104 that have been developed in tutorial groups that are not your own. In addition to the lectures each student will have two studio sessions a week. These are in the computer studio VS 319 and 322 (depending on which stream you choose or are allocated). Students will be divided into tutorial groups of about 18. There is an emphasis on the use of user reference in the course, and your tutors have been instructed not to answer your question directly but to show you how to find the answer yourselves. While initially this will take a bit longer than just telling you the answer, our aim is to help you become an independent learner. During the normal course of the studio session your tutors will be pointing you towards a wide range of instructional media. One of the most important aspects of DSDN104 is that students become a part of, and take advantage of, a worldwide community of designers who are learning and using computational methods. Because computer software and hardware offer the most complex instruments you are ever likely to use there will always be a focus on skill acquisition. But all of the computational skills in the world are of no use unless they become a part of, and support, your unique design conception, development, representation and networks. Your tutors will be happy to engage with you individually to advise you on aspects of design and point you towards examples of work, and working methods, from other designers that they think you will find valuable. When discussing design ideas with your tutor the principal vehicles promoting discourse are your own design drawings and models. Therefore you will need to create something that in some way captures the, or a, quality of your idea before you meet with your tutor. In addition to verbal feedback throughout the entire course you will receive documented feedback and assessment following each experiment hand-in. As suggested above, a primary learning resource in DSDN104 are the students in the class with you. You will gain a lot from presenting your work and critiquing the work of others in your class.

ASSIGNMENTS / PROJECTS Included below are the three experiment abstracts. You will be given a full brief for each experiment on the first timetabled day for that experiment. The full experiment briefs will go into more detail regarding each of the 4 components listed below. The experiment abstracts are included here to give you an overall impression of the course and to bring your attention to the concepts, designers and software we will be working with. As well as physical submissions, all work must be captured/scanned/photographed and presented in an online blog format. Submitted work may be displayed in internal/external exhibitions and will be returned later. Experiment 1: Make and Modify: 40% of final grade (Due 9 Aug) In Experiment one, students will use 3D CAD modelling software to generate forms from sections and drawings. They will then manipulate the forms and multiply them into a range of different but still similar iterations. The work will be presented on a blog documenting the process and outcome. Experiment 2: Fabricate: 30% of final grade (Profile Due 7 Sep, Hand-in Due 20 Sep) Experiment two will build on experiment one by requiring the students to interpret their designs to be produced using digital manufacturing technologies. The students will explore the expressive potential of laser cutting, and

4

invent techniques for joints/connections to create unique and innovative designed objects. Documentation both physical and digital development will be presented on the student’s blog. Experiment 3: Grow: 30% of final grade (STL Due 3 Oct, Hand-in Due 13 Oct*) Experiment three will require the students to explore Additive Fabrication as a method of digital creation. Additive fabrication frees the design process from the typical constraints of manufacturing and allows an expressive and innovative design outcome. Students will investigate the opportunities of this technology and present their findings as a ‘grown’ object, alongside development imagery on their blog. *Dates are subject to confirmation of exam timetable.

ASSESSMENT REQUIREMENTS

• Creativity in the development of appropriate design intentions. • Evidence of a clear understanding and demonstrated potential of digital media as it relates to design conception,

development, representation and networks. • Evidence of making distinctions between different computer software and hardware applications and

demonstrated strategies for determining their most appropriate use. • Evidence of a clear understanding of strategies for learning different software and hardware applications. • Evidence of critical reflection of design outcomes with respect to the above DSDN 104 is internally assessed by assignment work in the form of 3 projects (otherwise referred to as experiments). Projects are assessed and graded A+, A, A-, B+, B, B-, C+, C, D, E, (where C is a PASS). Grades only are issued to students. The final grade for the course is based on the aggregation of the percentage marks for each of the projects, and a final grade of C or better is required to pass the course. The 3 experiments contribute towards the final course grade as follows: 11 Jul – 9 Aug Experiment 1: Make and Modify 40% 11 Aug – 20 Sep Experiment 2: Fabricate 30% 22 Sep – 13 Oct Experiment 3: Grow 30% Total 100% Note: Students should familiarise themselves with the University’s requirements, particularly those regarding assessment and course of study requirements, contained in the statutes in the VUW Calendar and read the requirements of this course outline in that context. Your work will be reviewed on the basis of the degree to which it meets the assessment criteria. Although visitors may be involved in some of the reviews, the assessment of the course is carried out by the course coordinator in consultation with the tutors. The School has a long tradition of providing critical review of student work as it progresses especially in design projects. This is part of feed-back for learning purposes. Such reviews must not be misunderstood as indicators of standards and they are different from assessment. Students have a responsibility to attend critical reviews at the appointed time as part of the learning process. Review panels are often composed of internal and external members for the appointed times and cannot be re-composed to consider late submissions. Consequently late work will not receive a critical review, though it will be assessed subject to any penalties as set out below. • Critical Review: May take place during the development phases of a project as well as at the time of the final

submission. Its purpose is to identify strengths and weaknesses in the work and to offer suggestions to generally encourage the student. An encouraging critical review does not necessarily mean a good assessment result.

• Assessment: May take place at a stage in a project or on final submission (or both). Its purpose is to value the work in terms of the objectives stated in the handout and to express this as a grade. Moderation of all assessment in design is undertaken at the end of the Trimester after critical reviews, involving a wider group of staff than the immediate lecturers in the course. This process ensures fairness.

All work submitted for assessment must be accompanied by an Assessment Declaration Form unless advised otherwise by the Course Co-ordinator. All grades posted during this course are only provisional results until confirmed by the School Examiners Committee which meets after the examination period.

5

GROUP WORK

While there is no assessed group component for this course, working with your fellow classmates will be critical to your overall development ad eventual success within this course. Being able to discuss and review each other's work in a critical but supportive environment will be the key.

ATTENDANCE AND PARTICIPATION The design studio operates at three levels of instruction: the whole class, the tutorial group, and the individual. The studio thus involves both collective and individual participation from individuals in the group. Tutors will be in the studio at all scheduled times undertaking group and individual instruction and reviewing project work. Ongoing discussion will be critical to the development of your design work. Therefore, for the studio to operate effectively, students are expected to arrive on time, to be present for the whole studio session, (unless there are reasons why they cannot) and to actively participate in group and one-to-one discussions with your tutor. It is also expected that students will bring to the studio sessions the appropriate equipment and supplies needed to work productively on the design projects and to complete this project work on time. The intensity and regularity of participation in the studio is unerringly reflected in the understanding and quality expressed in the resulting work. Students are expected to maintain an acceptable level of cleanliness and tidiness in the studio as outlined in the Studio Culture Policy which is displayed in all studios. Attendance and participation is an important aspect of the learning process, and you are required to attend all the lectures and tutorials. If extraordinary circumstances arise that require you to be absent from some class sessions, you should discuss the situation with the Course Coordinator as soon as possible.

MANDATORY COURSE REQUIREMENTS

In addition to achieving an average of at least ‘C’ across all assessments, in order to pass the course you must also satisfy the following mandatory course requirements:

• Attend at least 80% of the studio sessions (An attendance register will be kept for the duration of the course) • Attend and present your project work at all scheduled critical reviews • You MUST submit all three projects to be eligible to pass the course • SUBMISSION OF WORK

SUBMISSION OF WORK

Each student is responsible for ensuring their work is submitted to their course tutor on time and in the required format. Late submissions will be penalised as set out below, unless an extension is approved by the Course Coordinator.

EXTENSIONS In the event of illness or other extraordinary circumstances that prevent you from submitting a piece of work on time, or that you feel adversely affect the quality of the work you submit, it is important that you discuss your circumstances with the Course Coordinator as soon as possible so that appropriate arrangements may be made. You should complete an Application for Extension form (available from the Faculty Office) for the Course Coordinator to approve. You will also need to provide suitable evidence of your illness or other circumstances. In an emergency, or if you are unable to contact the Course Coordinator, you should advise the Faculty Office of your situation. Work submitted late must be submitted to the Course Coordinator.

RECORDING OF WORK AND PORTFOLIO

You are strongly encouraged to respect and care for your work, making and recording a visual summary of each project in this course. This may be in digital and/or hard copy. The principal purpose of this is to maintain a

6

record of your work for incorporation into your own personal ‘Design Portfolio’. Recording a summary of your work also means it is available if needed for you or the School to exhibit or publish.

PENALTIES

Students are required to personally present their work on time at all scheduled reviews and in the location and specified format as set out in project outlines. Except in emergency situations failure to personally present work at any scheduled graded review will result in an automatic failing grade of D for the work being reviewed, unless an extension has been approved in writing in advance by the Course Coordinator.

Late submissions will not be penalised in the event of illness or other extraordinary circumstances provided students have submitted a request for an extension and received approval in writing from the Course Coordinator (see the Student Administration Office for an Application for Extension form). The extension must be approved in advance of the scheduled review or hand-in except in situations where the nature of the illness or other circumstance prevents this. Work submitted late without the prior agreement of the Course Coordinator will be penalised by a failing grade of D. Furthermore, if work is not handed in within 5 working days of the review without the prior agreement of the Course Coordinator it will be recorded as a non submission.

Work submitted late must be submitted directly to the Course Coordinator. Any project work left on the project shelves or elsewhere will be entered on the grade sheet as a no-submission.

COURSE EXPECTED WORKLOAD

You should expect to spend a total of around 150 hours on this course, including both scheduled class time and independent study. Typically this involves around 12-20 hours per week during the twelve teaching weeks, with the balance during the mid trimester break, study week and examination period. http://www.victoria.ac.nz/home/about_victoria/avcacademic/publications/assessment-handbook.pdf

MATERIALS AND EQUIPMENT REQUIRED

Students will need to provide all materials and equipment as necessary for the completion of required work.

It is recommended that you have your own laptop although computer facilities are available at the School. If you are purchasing a laptop and would like information on the minimum requirements please contact the Student Administration Office. While digital cameras are available at the school, it is also recommended that students consider purchasing a mid-range digital camera with macro function (5.0mpxl minimum). Note: The Student Loan, administered by StudyLink, allows students to claim up to $1,000 for course related costs for each year of study. Students will be supplied two A4-size sheets (one cardboard and one acrylic) for Experiment 2. Any additional material will need to be supplied by the student. Experiment 3 will require students to pay approximately $25* towards the cost of building their 3D printed model. It is recommended that you purchase a Design Materials Kit if you are enrolled in First Year Design. Details of the Design Kit can be found at http://www.firstyeardesign.com/index.php?/Infodocs. The kit can be purchased from Gordon Harris on Victoria Street for $160**. There is a free safety kit available from the reprographic shop on the ground floor of the School of Design. * Price may slightly vary depending on the complexity and weight of each project. ** Price may vary.

COMMUNICATION OF ADDITIONAL INFORMATION

Important information and updates will be available on the course website therefore students are strongly recommended to visit www.firstyeardesign.com regularly and read the posts carefully.

7

READINGS AND REFERENCE MATERIAL

The following readings are also recommended for this course:

Author

Title

Call No.

Related lecture / course section

Schmal, Peter (2001)

Digital Real: Blobmeister Birkhäuser, Basel

NA 2728 D574 Course in general

Callicott, Nick (2001)

Computer-Aided Manufacture in Architecture: The Pursuit of Novelty Architectural Press, Oxford

NA2728 C158 C

Course in general

Filed, Marcus (1999)

Future Systems Phaidon Press, London

NA997 F89 F455 Course in general

Kolarevic, Branko (2005)

Architecture in the Digital Age: Design and Manufacturing Taylor & Francis, New York

NA2543 T43 A673 I 2005

Course in general

Leach, Neil Turnbull, David Williams, Chris (2004)

Digital Tectonics Wiley, Chichester

NA2750 D574 Course in general

Lindsey, Bruce (2001)

Digital Gehry Birkhäuser, Basel

NA737 G311 L752 D

Course in general

Lynn, Greg (1999)

Animate Form Princeton Architectural Press, New York

NA737 L989 A Course in general

Lynn, Greg (2006)

Greg Lynn: Predator Damdi, Seoul

NA737 G818 A4 F Course in general

It is worth looking in the AVERY index and Environmental Building News magazine, as much of the most recent material is in magazines. The Architecture and Design library has an extensive selection of books about sustainable architecture, design, materials, landscapes, energy use etc that are not listed here and that are on order currently. If students require specific information not listed here discuss with tutors or with the Course Coordinator. Any additional specific reading and reference material will be outlined in project / assignment hand outs or may be specified by guest lecturers and speakers. Useful web resources

Course Material: R:\Course_Material\DSDN\DSDN104 Hand-in Submission: R:\Hand-ins\DSDN\DSDN104 Other Reference Material: www.FirstYearDesign.com

8

SCHEDULE OF SESSIONS & ASSESSMENTS

Students must be seated in class no later than 5 minutes prior to the start of lectures. Mobile phones must be turned off.

Trimester 2 Planner Week Month

Day Date Lecture Submission Comments

Week 28 July

M 11 Trimester 2 starts T 12 EXP 1 Introduction W 13 TH 14 F 15

Week 29 July

M 18 T 19 W 20 TH 21 F 22

Week 30 July

M 25 T 26 Iterations W 27 TH 28 F 29

Week 31 August

M 1 T 2 W 3 TH 4 F 5

Week 32 August

M 8 T 9 EXP 2 Introduction EXP 1 Hand-in/Presentation - 40% W 10 TH 11 F 12

Week 33 August

M 15 T 16 Fabrication W 17 TH 18 F 19

Week 34 August

M 22 Mid trimester break T 23 W 24 TH 25 F 26

Week 35 August

M 29 T 30 W 1 TH 2 F 3

Week 36 Sept

M 5 Trimester 2 continues T 6 Guest W 7 EXP 2 Lasercut Profile Hand-in TH 8 F 9

Week 37 Sept

M 12 T 13 Guest W 14 TH 15 F 16

Week 38 Sept

M 19 T 20 EXP 3 Introduction EXP 2 Hand-in / Presentation - 30% W 21 TH 22

9

F 23 Week 39 Sept

M 26 T 27 Pattern W 28 TH 29 F 30

Week 40 Oct

M 3 EXP 3 STL Hand-in T 4 Guest W 5 TH 6 F 7

Week 41 Oct

M 10 T 11 W 12 TH 13 EXP 3 Hand-in / Presentation – 30% F 14

Week 42 M 17 Study break Oct T 18 W 19 TH 20 F 21 Week 43 M 24 Exams commence

Labour Day Oct T 25 W 26 TH 27 F 28 Week 44 M 31 Nov T 1 W 2 TH 3 F 4 Week 45 M 7 Nov T 8 W 9 TH 10 F 11 Week 46 M 14 Trimester 3 begins Nov T 15 W 16 TH 17 F 18

10

STUDENT REPRESENTATIVES

The Faculty of Architecture and Design operates a system of Class Representatives in 100-level courses, and Year Representatives in each of the professional disciplines. Student Representatives are elected during a class session in the first week of teaching. All student representatives will be listed on the STUDiO notice board in the Atrium, and the relevant Representatives are also listed on studio notice boards. Student Representatives have a role in liaising between staff and students to represent the interests of students to academic staff, and also in providing students with a communication channel to STUDiO and VUWSA.

ACADEMIC INTEGRITY AND PLAGIARISM Academic integrity means that University staff and students, in their teaching and learning are expected to treat others honestly, fairly and with respect at all times. It is not acceptable to mistreat academic, intellectual or creative work that has been done by other people by representing it as your own original work. Academic integrity is important because it is the core value in which the University’s learning, teaching and research activities are based. Victoria University’s reputation for academic integrity adds value to your qualification. The University defines plagiarism as presenting someone else’s work as if it were your own, whether you mean to or not. ‘Someone else’s work’ means anything that is not your own idea. Even if it is presented in your own style, you must acknowledge your sources fully and appropriately. This includes: • Material from books, journals or any other printed source • The work of other students or students or staff • Information from the internet • Software programs and other electronic material • Designs and ideas • The organisation or structuring of any such material Find out more about plagiarism, how to avoid it and penalties, on the University’s website: www.victoria.ac.nz/home/studying/plagiarism.html

USE OF TURNITIN

Student work provided for assessment in this course may be checked for academic integrity by the electronic search engine http://www.turnitin.com. Turnitin is an online plagiarism prevention tool which compares submitted work with a very large database of existing material. At the discretion of the Head of School, handwritten work may be copy-typed by the School and subject to checking by Turnitin. Turnitin will retain a copy of submitted material on behalf of the University for detection of future plagiarism, but access to the full text of submissions is not made available to any other party.

WHERE TO FIND MORE DETAILED INFORMATION

Find key University dates, explanations of grades and other useful information at www.victoria.ac.nz/home/study. Find out about academic progress requirements and restricted enrolment at www.victoria.ac.nz/home/study/academic-progress. The University’s statutes and policies are available at www.victoria.ac.nz/home/about/policy, except qualification statutes, which are available via the Calendar webpage at www.victoria.ac.nz/home/study/calendar (See Section C). Further information about the University’s academic processes can be found on the website of the Assistant Vice-Chancellor (Academic) at www.victoria.ac.nz/home/about_victoria/avcacademic/default.aspx Students with Impairments Refer to the Meeting the Needs of Students with Impairments Policy, available on the University’s policy website http://www.victoria.ac.nz/home/about/policy

11

Information regarding support is available from the Faculty Office reception desk. Student Support Staff at Victoria want students to have positive learning experiences at the University. There are a number of support services available to help you directly if your academic progress is causing concern or if there are elements in your life that are affecting your ability to study. These include: • Your course coordinator or programme director; • Staff in your Faculty Student Administration Office; Student Dedicated learning support through Student

Learning Support Service; Te Ropu Awhina; Kaiwawao Māori ;Maanaki Pihipihanga; Disability Support Services and Victoria International;

• Wider holistic support through the Health Service; Counselling Service; Financial Support and Advice; Accommodation Service and Career Development and Employment. Find out more at www.victoria.ac.nz/st_services/ or email student-services@vuw.ac.nz;

• VUWSA employs a Student Advocate who deals with academic problems and provides support, advice and advocacy services, as well as training and supporting class representatives and faculty delegates. The Education Office is located on the ground floor, Student Union Building. Email education@vuwsa.org.nz or tel. 463-6716 or 463-6984.

TE ARO CAMPUS BUILDING RULES AND FACILITIES

Students on the Te Aro Campus are required to comply with the Faculty Guidelines relating to the safe use, access and care of the Architecture and Design technical resources and building facilities. These are available on the School website, and in the following documents available from the student R drive: R:\Student Health and Safety Information FAD Health & Safety info – available to all students at R:\Student Health and Safety Information, covering: • Workshop and campus safety • Safety training and safety precautions for the workshops • FAD Hazard Register • Te Aro Campus floor plans FAD Technical Services and Facilities Handbook – issued to all staff and available to all students on the student R drive, covering various local practices, including information on: • Information for new staff and students • Access and booking of teaching / studio spaces, and technical resources • Studio etiquette and rules pertaining to exhibitions, critiques and storage of models/drawings • Housekeeping/cleaning within the studios and workshops • Information on Te Aro IT systems and support • Te Aro campus floor plans General information on Faculty/School Technical Facilities including technical staff and their associated areas - http://www.victoria.ac.nz/fad/facilities/technical-resource-centre.aspx

WHERE TO GET HELP Vivian Street – Faculty of Architecture and Design Student Administration Office The Faculty’s Student Administration Office is located on the first floor. The first floor counter is the first point of contact for general enquiries and Faculty of Architecture and Design forms. Student Administration Advisors are available to discuss course status and give further advice about Faculty of Architecture and Design qualifications. To check for opening hours call the Faculty Student Administration Office on (04) 463 6200.

HEALTH AND SAFETY

Students are reminded that they must comply with any health and safety instructions given by staff members in charge of work places and instructions and signs posted around the campus. All students should familiarise themselves with the FAD Health & Safety Manual and Notices around the Workshops and Laboratories. Students are advised to refer to the Student R drive for safety and other relevant information. R:\Student Health and Safety Information

12

WITHDRAWAL DATES Information on withdrawals and refunds can be found at: http://www.victoria.ac.nz/home/admisenrol/payments/withdrawlsrefunds.aspx

NOTE Please consider the environment before printing this document. If printing is required please set print properties to ‘black and white’ and ‘2-sided print’.

VICTORIA UNIVERSITY OF WELLINGTON Te Whare Wananga o te Upoko o te Ika a Maui

13

Faculty of Architecture and Design

Work Submitted for Assessment Declaration Form

Student’s full name : Course : Assignment/project : (number and title) Date submitted : _____________________________________________________________________ Refer to the information on Academic Integrity, Plagiarism and Copyright on the back of this form. I confirm that:

• I have read and understood the University’s information on academic integrity and plagiarism contained at http://www.victoria.ac.nz/home/study/plagiarism.aspx and outlined below:

• I have read and understood the general principles of copyright law as set out below:

• This project/assignment is entirely the result of my own work except where clearly acknowledged otherwise:

• Any use of material created by someone else is permitted by the copyright owner. Signed: Date:

14

Academic Integrity, Plagiarism and Copyright ACADEMIC INTEGRITY Academic integrity is important because it is the core value on which the University’s learning, teaching and research activities are based. University staff and students are expected to treat academic, intellectual or creative work that has been done by other people with respect at all times. Victoria University’s reputation for academic integrity adds value to your qualification. Academic integrity is simply about being honest when you submit your academic work for assessment

• You must acknowledge any ideas and assistance you have had from other people. • You must fully reference the source of those ideas and assistance. • You must make clear which parts of the work you are submitting are based on other people’s work. • You must not lie about whose ideas you are submitting. • When using work created by others either as a basis for your own work, or as an element within your own

work, you must comply with copyright law

(Summarised from information on the University’s Integrity and Plagiarism website: www.victoria.ac.nz/home/studying/plagiarism.html)

PLAGIARISM The University defines plagiarism as presenting someone else’s work as if it were your own, whether you mean to or not. ‘Someone else’s work’ means anything that is not your own idea. Even if it is presented in your own style, you must acknowledge your sources fully and appropriately. This includes:

• Material from books, journals or any other printed source • The work of other students or staff • Information from the internet • Software programs and other electronic material • Designs and ideas • The organisation or structuring of any such material

Find out more about plagiarism, how to avoid it and penalties, on the University’s website: www.victoria.ac.nz/home/studying/plagiarism.html COPYRIGHT Copyright law regulates the use of the work of an author, artist, designer or other creator.

• Copyright applies to created work including designs, music, computer programs, artistic and literary work.

• The work can be in printed, digital, audio, video or other formats. • Normally the author or creator of a work owns the copyright for their lifetime and for 50 years after their

death, (although sometimes someone other than the creator of a work owns the copyright to the work, such as the creator’s employer, or a person who commissions the creator’s work).

• You must have permission from the copyright owner to copy, alter, display, distribute or otherwise use created work.

• If the creator has applied a Creative Commons licence to a work, this permits others to use the work but only in accordance with that licence.

Further information on copyright is available on the Creative Commons Aotearoa FAQ website: http://www.creativecommons.org.nz/frequently_asked_questions#III1