Dsc11 Assembly Full
-
Upload
anupam-rana -
Category
Documents
-
view
234 -
download
0
Transcript of Dsc11 Assembly Full
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 1/15
Assembly Instructions
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 2/15
Note
TO BEGIN
Items of Caution
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size as there
are many differences in dimensions depending on the
type of printer used.
Tools and materials needed
-Ruler -Scissors - Blade cutter or "Exacto-knife" - Awl or
other pointed tool (for making a folding crease) - Felt
pen - Pin set - Glue - Hand towel ( for cleaning your
fingers) - Dictionary or other heavy book ( to press thepapers flat)
HOW TO ASSEMBLE
Basic working method and markings
Fold along these lines. The printed
surface should be on the outside of
the folded shape.
Solid lines
Dotted line
Fold along these lines. The printed
surface should be on the inside of
the folded shape.
Broken lines
Cut along these lines
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 3/15
A-5
Fuel TankSheet A, 5 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
1 Assembling the Fuel Tank
Fold and glue the corresponding tabs (dotted parts)so that they make good symmetrical pairs.
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 4/15
SteeringSheet B, 34 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
2 Assembling the Steering
B-3
B-34
B-5B-6
B-33
B-24
B-10
B-7
B-11
B-1B-2
B-8
B-9
B-12
B-20B-4B-27
B-21
After inserting B-2 and B-3 through B-1, fold B-1according to the arrows indicated in the diagram.
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 5/15
C-12
C-1C-2C-14 C-15 C-16 C-17 C-13 C-10
C-9
C-18C-19 C-20
C-6C-5
C-11C-22
C-23
C-24
C-30
C-28
C 29
C-3
C-31
C-7
C-21
FrameSheet C, 33 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
3 Assembling the Frame
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 6/15
D-24
D-25
D-15
D 30
D-17
D-18D-16
D-23
D-3
D-1
D-2
D-19
D-21
D-22
D-11
D-20D-10
D-6
D-14
D 13
D-9
D-5
D-8D-12
D-4
D-7
EngineSheet D, 32 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
4 Assembling the Engine
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 7/15
E-8E-7
E-6E-4
E-1
E-2
E-9
E-10
E-14E-11
E-13E-16
E-15
E-17
E-12
E-3
E-5
Exhaust PipesSheet E, 17 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
5 Assembling the Exhaust Pipes,Footboards
Reference photo
Exhaust Pipe (b)
Exhaust Pipe (a)
E h t Pi (b)
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 8/15
G 17
G-15 G-16
G 26 G 27 G 18
G-9
G-2
G-3
G-13
G-10
G-11
G-5
G-19G-21
G-
20
G-12
G-7
G-14
G-4
Rear ArmSheet G, 28 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
6 Assembling the Rear Arm
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 9/15
H-14 H-17H-15
H-16
H-8
H-1
H-3H-2
Side Cover (b)
Side Cover (a)Side Cover (c)
Side CoversSheet H, 17 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
7 Assembling the Side Covers
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 10/15
10
I-8I-5
I-6
I-4
I-1I-2
I-7I-3
I-9
I-11
I-12
Rear FenderSheet I, 12 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
8 Assembling the Rear Fender,Seat
Reference photo
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 11/15
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
9 Assembling the Front Tire
K-8
K-11
K-10
Front TireSheet K, 14 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
*Glue the completed front wheel to the assembled front tire.
[Front tire]
[Front wheel]
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 12/15
L-1 L-12
L-3
L-8
L-9L-4
L-6
L-5
L-10
L 7
Rear TireSheet L, 21 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
10 Assembling the Rear Tire
[Rear tire]
*Glue the completed rear wheel to the assembled rear tire.
[Rear wheel]
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 13/15
glue the assembled parts in numerical
order through .
Assembly Instructions
- 13 -
Please use the dots on each component as reference when gluing surfaces.
11 Finish
Complete the assembly by gluing the left andright footboards to each side of the frame.
1
2
3
4
5
6
7
8
910
11
12
Glue the rear arm to the frame.
Glue the rear tire to the rear arm.
Glue the rear fender to the frame.
Glue the seat to the frame.
Glue the side covers, d and c, to the engine.
Glue the exhaust pipes, a and b, to the engine.
Glue the part completed in to the frame.
Glue side covers, a, b and c, to the frame.
Glue the front tire to the steering.
Glue the steering to the frame.
Glue the fuel tank to the frame.
Steering Frame
Fuel Tank
Seat
Rear Fender
Engine
Front Tire
Side Cover (a)
Side Cover (b)
Side Cover (c)
Side Cover (d)
Side Cover (e)
Rear Tire
Rear Arm
Exhaust Pipe (a)
Exhaust Pipe (b)
Footboard (left)
Footboard (right)
6
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 14/15
- 14 -
RIGHT FRONT
E-1E-2E-3E-4E-5
E-6E-7E-8E-9E-10
E-11E-12E-13E-14E-15
K-1K-2K-3K-4K-5
B-1B-2B-3B-4B-5B-6
K-6K-7K-8K-9K-10
K-11K-12K-13K-14
A-1A-2A-3A-4A-5
L-1L-2L-3L-4L-5
L-6L-7L-8L-9L-10
J-1J-2
L-11L-12L-13L-14L-15
L-16L-17L-18L-19L-20L-21
H-1H-2H-3H-4H-5H-6
H-7H-8H-9H-10H-11H-12
H-13H-14H-15H-16H-17
B-7B-8B-9B-10B-11B-12
B-13B-14B-15B-16B-17B-18
B-19B-20B-21B-22B-23B-24
B-25B-26B-27B-28B-29B-30
B-31B-32B-33B-34
12 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
SteeringFront Tire
Rear Tire
Exhaust Pipes
Fuel TankSeat Side Covers
E-16E-17
7/30/2019 Dsc11 Assembly Full
http://slidepdf.com/reader/full/dsc11-assembly-full 15/15
- 15 -
LEFT REAR
D-1D-2D-3D-4D-5
D-6D-7D-8D-9D-10
D-11D-12D-13D-14D-15
D-16D-17D-18D-19D-20
D-21D-22D-23D-24D-25
13 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
Engine
D-26D-27D-28D-29D-30
D-31D-32
G-1G-2G-3G-4G-5
G-6G-7G-8G-9G-10
G-11G-12G-13G-14G-15
G-16G-18G-19G-20G-21
Rear Arm
G-22G-23G-24G-25G-26
G-27G-28
I-1I-2I-3I-4I-5
Rear Fender
I-6I-7I-8I-9I-10
I-11I-12
F-1F-2F-3F-4
F-5F-6F-7F-8
Footboards
F-9F-10F-11
C-1C-2C-3C-4C-5C-6
C-7C-8C-9C-10C-11C-12
C-13C-14C-15C-16C-18C-19
C-20C-21C-22C-23C-24C-25
C-26C-27C-28C-29C-30C-31
Frame
C-32C-33