EPC : FLUOR DANIEL INDIA PVT LTD. RFQ No. : AXGA004

OWNER : BASF INDIA LTD DATE : 29.02.2012

LOCATION : DAHEJ, GUJARAT, INDIA. DRG NO. : HP-32-7324

UNIT : 2020 P. CURVE NO. : 0321602A4387

SERVICE : PROPYLENE OXIDE (PO) UNLOADING PUMP PUMP MODEL : VRJ 32-160/2.2H2/GB/C

ITEM NO. : 202-P-1103 REV. NO./DATE : ---

NO. OF PUMP REQ'D : 01 SHEET NO. : 01 OF 04

OPERATING CONDITIONS PERFORMANCE

LIQUID : PROPYLENE OXIDE CAP.@PT(m3/hr) NOR : 10.0 WITH RATED IMP.130mm

NATURE : -- MAX. : -- SPEED(rpm) : 2900

RATED. : 10.0 NPSHR(WATER) (m) : 1.5

SP. GR. @PT : 0.84 DIS. PRESS. (barg) : 2.1 MIN. CONT. FLOW (m3/hr) : 1.5

VAP. PRESS.@PT(bara) : 1.22 SUCT. PRESS. MAX. : 0.430 ROTATION Clock Wise

VISCOSITY @PT(cp) : 0.38 RATED (barg) : -- (VIEWED FROM MOTOR)

SOLID CONTENT : NIL DIFF. PRESS.(barg) : 1.60 PUMP EFF. (%) : 37.0

CONC. :--- SIZE :--- DIFF. HEAD (m) : 20.0 RATED BKW : 1.24

SOLIDIFICATION TEMP. :--- NPSHA (m) : 1.80 SHUT-OFF HEAD (m) : 23.0

CORR/EROS. CAUSED BY : ---

CONSTRUCTION AUXILIARY PIPING

CASING MOUNT : FOOT COOLING JACKET : INCLUDED

TYPE : SINGLE VOLUTE C.W.REQ'D (m3/hr) : 1.0

REV. CIRCULATION (m3/hr) : 1.5

EXT. FLUSH FLUID ( Lit/hr) : ---

IMPELLER DIA (mm) RATED : 130 MAX : 169 MIN : 130 PRESSURE ( kg/cm2 g) : ---

IMPELLER MOUNT : OVERHUNG IMPELLER TYPE : CLOSED PUMP CASING JACKET : ---

BEARING TYPE : JOURNAL MATERIALS

LUBRICATION : SELF LUBRICATION CASING : CF8

NO. OF. STAGES : 01 IMPELLER : CF8

NOZZLES OR PORTS SIZE RATING FACING LOCATION SHAFT : SS 304L

SUCTION 50 150# RF END STATOR LINER (CAN) : SS 316L

DISCHARGE 32 150# RF TOP ROTOR LINER (CAN) : SS 316L

BEARING : CARBON

CANNED MOTOR DRIVER BEARING SLEEVE : SS 304+HCR

MOTOR RATING (KW) : 2.2 SYNCHRONOUS SPEED (rpm) : 3000 THRUST WASHER : SS 304+HCR

VOLTAGE/PHASE/Hz : 415 / 3 / 50 GASKETS/'O'RINGS : CFT/PTFE

FULL LOAD AMPS : 6.3 LOCKED ROTOR AMPS : 24.3 STATOR BODY : STEEL

MANUFACTURER: HYDRODYNE BASE PLATE : STEEL

TYPE : SQUIRREL CAGE INDUCTION ENCL/EX-PROOF:IP66/EEx-d IIBT6 (Ex)ds BEARING MONITOR : SS316L

INSULATION CLASS : H : 180 SAFETY FEATURES

CONDUIT FOR MOTOR LEAD : 1" BSP 1. THERMOSTAT : INCLUDED

FOR THERMOSTAT : 3/4" BSP 2. BEARING MONITOR : INCLUDED

BEARING MONITOR: MECHANICAL TYPE 3. DRY RUN PROTECTION : OPTIONAL

WEIGHT OF THE PUMP MOTOR UNIT APPX.: 115 Kgs. 4. PRESSURE TRANSMITER : OPTIONAL

PUMP TYPE : VERTICAL REVERSE CIRCULATION JACKETED PUMP 5. THERMOWELL + TT : OPTIONAL

ADDITIONAL SCOPE

1. BASE PLATE : INCLUDED

2. FOUNDATION BOLTS : INCLUDED

3.COMPANION FLANGES : INCLUDED

PREPARED BY

HY-FM-03/R1 CHECKED BY

HYDRODYNE (INDIA) PVT. LTD. HYDRODYNE CANNED MOTOR PUMP SPECIFICATION DATA SHEET

PUMPING TEMP.(0C) : 32

MAX. ALLOWABLE PRESS. (kgf/cm2g) : 10

HYDROSTATIC TEST PRESS. (kgf/cm2g) : 15

THERMOSTAT TEMP.(0C)

HYDRODYNE

EPC : FLUOR DANIEL INDIA PVT LTD. RFQ No. : AXGA004

OWNER : BASF INDIA LTD DATE : 29.02.2012

LOCATION : DAHEJ, GUJARAT, INDIA. DRG NO. : HP-32-7325

UNIT : 2020 P. CURVE NO. : 040125M2A4388

SERVICE : PROPYLENE OXIDE (PO) TRANSFER PUMP PUMP MODEL : MTVRJ 40-125/12H2/GB/C

ITEM NO. : 202-P-1104 REV. NO./DATE : ---

NO. OF PUMP REQ'D : 01 SHEET NO. : 02 OF 04

OPERATING CONDITIONS PERFORMANCE

LIQUID :PROPYLENE OXIDE (PO) CAP.@PT(m3/hr) NOR : 10.0 WITH RATED IMP.137mm

NATURE : -- Min. : 4.5 SPEED(rpm) : 2900

RATED. : 10.0 NPSHR(WATER) (m) : 1.5

SP. GR. @PT : 0.84 DIS. PRESS. (barg) : 12.01 MIN. CONT. FLOW (m3/hr) : 2.0

VAP. PRESS.@PT(bara) : 1.22 SUCT. PRESS. MAX. : 0.400 ROTATION Clock Wise

VISCOSITY @PT(cp) : 0.38 RATED (barg) : -- (VIEWED FROM MOTOR)

SOLID CONTENT : NIL DIFF. PRESS.(barg) : 11.60 PUMP EFF. (%) : 32.0

CONC. :--- SIZE :--- DIFF. HEAD (m) : 140.0 RATED BKW : 10.01

SOLIDIFICATION TEMP. :--- NPSHA (m) : 1.9 SHUT-OFF HEAD (m) : 154.0

CORR/EROS. CAUSED BY : ---

CONSTRUCTION AUXILIARY PIPING

CASING MOUNT : FOOT COOLING JACKET : INCLUDED

TYPE : SINGLE VOLUTE C.W.REQ'D (m3/hr) : 2.0

REV. CIRCULATION (m3/hr) : 2.0

EXT. FLUSH FLUID ( Lit/hr) : ---

IMPELLER DIA (mm) RATED : 137 MAX : 145 MIN : 125 PRESSURE ( kg/cm2 g) : ---

IMPELLER MOUNT : OVERHUNG IMPELLER TYPE : CLOSED PUMP CASING JACKET : ---

BEARING TYPE : JOURNAL MATERIALS

LUBRICATION : SELF LUBRICATION CASING : CF8

NO. OF. STAGES : 07 IMPELLER : CF8

NOZZLES OR PORTS SIZE RATING FACING LOCATION SHAFT : SS 304L

SUCTION 50 150# RF END STATOR LINER (CAN) : SS 316L

DISCHARGE 40 150# RF TOP ROTOR LINER (CAN) : SS 316L

BEARING : CARBON

CANNED MOTOR DRIVER BEARING SLEEVE : SS 304+HCR

MOTOR RATING (KW) : 12 SYNCHRONOUS SPEED (rpm) : 3000 THRUST WASHER : SS 304+HCR

VOLTAGE/PHASE/Hz : 415 / 3 / 50 GASKETS/'O'RINGS : CFT/PTFE

FULL LOAD AMPS : 24 LOCKED ROTOR AMPS : 120 STATOR BODY : STEEL

MANUFACTURER: HYDRODYNE BASE PLATE : STEEL

TYPE : SQUIRREL CAGE INDUCTION ENCL/EX-PROOF:IP66/EEx-d IIBT6 (Ex)ds BEARING MONITOR : SS316L

INSULATION CLASS : H : 180 SAFETY FEATURES

CONDUIT FOR MOTOR LEAD : 1" BSP 1. THERMOSTAT : INCLUDED

FOR THERMOSTAT : 3/4" BSP 2. BEARING MONITOR : INCLUDED

BEARING MONITOR: MECHANICAL TYPE 3. DRY RUN PROTECTION : OPTIONAL

WEIGHT OF THE PUMP MOTOR UNIT APPX.: 270Kgs. 4. PRESSURE TRANSMITER : OPTIONAL

PUMP TYPE : VERTICAL MULTISTAGE REVERSE CIRCULATION JACKETED PUMP 5. THERMOWELL + TT : OPTIONAL

ADDITIONAL SCOPE

1. BASE PLATE : INCLUDED

2. FOUNDATION BOLTS : INCLUDED

3.COMPANION FLANGES : INCLUDED

PREPARED BY

HY-FM-03/R1 CHECKED BY

HYDRODYNE (INDIA) PVT. LTD. HYDRODYNE CANNED MOTOR PUMP SPECIFICATION DATA SHEET

PUMPING TEMP.(0C) : 32

MAX. ALLOWABLE PRESS. (kgf/cm2g) : 13

HYDROSTATIC TEST PRESS. (kgf/cm2g) : 18

THERMOSTAT TEMP.(0C)

HYDRODYNE

EPC : FLUOR DANIEL INDIA PVT LTD. RFQ No. : AXGA004

OWNER : BASF INDIA LTD DATE : 29.02.2012

LOCATION : DAHEJ, GUJARAT, INDIA. DRG NO. : HP-32-7326

UNIT : --- P. CURVE NO. : 040125M2A4389

SERVICE : BUTADIENE FEED PUMP PUMP MODEL : MTHRJ 40-125/12H2/GQ/C

ITEM NO. : P 1192A REV. NO./DATE : ---

NO. OF PUMP REQ'D : 01 SHEET NO. : 03 OF 04

OPERATING CONDITIONS PERFORMANCE

LIQUID : BUTADIENE ( MONOMER) CAP.@PT(m3/hr) NOR : 7.5 WITH RATED IMP.133mm

NATURE : -- Min. : --- SPEED(rpm) : 2900

RATED. : --- NPSHR(WATER) (m) : 1.5

SP. GR. @PT : 0.63 DIS. PRESS. (barg) : --- MIN. CONT. FLOW (m3/hr) : 2.0

VAP. PRESS.@PT(bara) : 1.39 SUCT. PRESS. MAX. : --- ROTATION Clock Wise

VISCOSITY @PT(cp) : 0.15 to 0.6 RATED (barg) : --- (VIEWED FROM MOTOR)

SOLID CONTENT : NIL DIFF. PRESS.(barg) : --- PUMP EFF. (%) : 26.0

CONC. :--- SIZE :--- DIFF. HEAD (m) : 200.0 RATED BKW : 9.90

SOLIDIFICATION TEMP. :--- NPSHA (m) : * SHUT-OFF HEAD (m) : 211.0

CORR/EROS. CAUSED BY : ---

CONSTRUCTION AUXILIARY PIPING

CASING MOUNT : FOOT COOLING JACKET : INCLUDED

TYPE : SINGLE VOLUTE C.W.REQ'D (m3/hr) : 2.0

REV. CIRCULATION (m3/hr) : 2.0

EXT. FLUSH FLUID ( Lit/hr) : ---

IMPELLER DIA (mm) RATED : 133 MAX : 145 MIN : 125 PRESSURE ( kg/cm2 g) : ---

IMPELLER MOUNT : OVERHUNG IMPELLER TYPE : CLOSED PUMP CASING JACKET : ---

BEARING TYPE : JOURNAL MATERIALS

LUBRICATION : SELF LUBRICATION CASING : CF3M

NO. OF. STAGES : 10 IMPELLER : CF3M

NOZZLES OR PORTS SIZE RATING FACING LOCATION SHAFT : SS 316L

SUCTION 50 300# RF END STATOR LINER (CAN) : SS 316L

DISCHARGE 40 300# RF TOP ROTOR LINER (CAN) : SS 316L

BEARING : SIC

CANNED MOTOR DRIVER BEARING SLEEVE : SIC

MOTOR RATING (KW) : 12 SYNCHRONOUS SPEED (rpm) : 3000 THRUST WASHER : SS316L+SIC

VOLTAGE/PHASE/Hz : 415 / 3 / 50 GASKETS/'O'RINGS : CFT/PTFE

FULL LOAD AMPS : 24 LOCKED ROTOR AMPS : 120 STATOR BODY : STEEL

MANUFACTURER: HYDRODYNE BASE PLATE : STEEL

TYPE : SQUIRREL CAGE INDUCTION ENCL/EX-PROOF:IP66/EEx-d IIBT6 (Ex)ds BEARING MONITOR : SS316L

INSULATION CLASS : H : 180 SAFETY FEATURES

CONDUIT FOR MOTOR LEAD : 1" BSP 1. THERMOSTAT : INCLUDED

FOR THERMOSTAT : 3/4" BSP 2. BEARING MONITOR : INCLUDED

BEARING MONITOR: MECHANICAL TYPE 3. DRY RUN PROTECTION : OPTIONAL

WEIGHT OF THE PUMP MOTOR UNIT APPX.: 310Kgs. 4. PRESSURE TRANSMITER : OPTIONAL

PUMP TYPE : MULTISTAGE REVERSE CIRCULATION JACKETED PUMP 5. THERMOWELL + TT : OPTIONAL

*REMARKS:NPSH(A) at site should be at least 1m greater than NPSH(R) ADDITIONAL SCOPE

1. BASE PLATE : INCLUDED

2. FOUNDATION BOLTS : INCLUDED

3.COMPANION FLANGES : INCLUDED

PREPARED BY

HY-FM-03/R1 CHECKED BY

HYDRODYNE (INDIA) PVT. LTD. HYDRODYNE CANNED MOTOR PUMP SPECIFICATION DATA SHEET

PUMPING TEMP.(0C) : 5-30

MAX. ALLOWABLE PRESS. (kgf/cm2g) : 15

HYDROSTATIC TEST PRESS. (kgf/cm2g) : 22.5

THERMOSTAT TEMP.(0C)

HYDRODYNE

EPC : FLUOR DANIEL INDIA PVT LTD. RFQ No. : AXGA004

OWNER : BASF INDIA LTD DATE : 29.02.2012

LOCATION : DAHEJ, GUJARAT, INDIA. DRG NO. : HP-32-7327

UNIT : --- P. CURVE NO. : 0502502A4390

SERVICE : BUTADIENE UNLOADING PUMP PUMP MODEL : HRJ 50-250/12H2/GQ/C

ITEM NO. : P 1195 REV. NO./DATE : ---

NO. OF PUMP REQ'D : 01 SHEET NO. : 04 OF 04

OPERATING CONDITIONS PERFORMANCE

LIQUID : BUTADIENE ( MONOMER) CAP.@PT(m3/hr) NOR : 35.0 WITH RATED IMP.230mm

NATURE : -- Min. : --- SPEED(rpm) : 2900

RATED. : --- NPSHR(WATER) (m) : 3.0

SP. GR. @PT : 0.63 DIS. PRESS. (barg) : --- MIN. CONT. FLOW (m3/hr) : 7.0

VAP. PRESS.@PT(bara) : 1.39 SUCT. PRESS. MAX. : --- ROTATION Clock Wise

VISCOSITY @PT(cp) : 0.15 to 0.6 RATED (barg) : --- (VIEWED FROM MOTOR)

SOLID CONTENT : NIL DIFF. PRESS.(barg) : --- PUMP EFF. (%) : 47.0

CONC. :--- SIZE :--- DIFF. HEAD (m) : 70.0 RATED BKW : 8.94

SOLIDIFICATION TEMP. :--- NPSHA (m) : * SHUT-OFF HEAD (m) : 73.5

CORR/EROS. CAUSED BY : ---

CONSTRUCTION AUXILIARY PIPING

CASING MOUNT : FOOT COOLING JACKET : INCLUDED

TYPE : SINGLE VOLUTE C.W.REQ'D (m3/hr) : 2.0

REV. CIRCULATION (m3/hr) : 2.0

EXT. FLUSH FLUID ( Lit/hr) : ---

IMPELLER DIA (mm) RATED : 230 MAX : 260 MIN : 200 PRESSURE ( kg/cm2 g) : ---

IMPELLER MOUNT : OVERHUNG IMPELLER TYPE : CLOSED PUMP CASING JACKET : ---

BEARING TYPE : JOURNAL MATERIALS

LUBRICATION : SELF LUBRICATION CASING : CF3M

NO. OF. STAGES : 01 IMPELLER : CF3M

NOZZLES OR PORTS SIZE RATING FACING LOCATION SHAFT : SS 316L

SUCTION 80 300# RF END STATOR LINER (CAN) : SS 316L

DISCHARGE 50 300# RF TOP ROTOR LINER (CAN) : SS 316L

BEARING : SIC

CANNED MOTOR DRIVER BEARING SLEEVE : SIC

MOTOR RATING (KW) : 12 SYNCHRONOUS SPEED (rpm) : 3000 THRUST WASHER : SS316L+SIC

VOLTAGE/PHASE/Hz : 415 / 3 / 50 GASKETS/'O'RINGS : CFT/PTFE

FULL LOAD AMPS : 24 LOCKED ROTOR AMPS : 120 STATOR BODY : STEEL

MANUFACTURER: HYDRODYNE BASE PLATE : STEEL

TYPE : SQUIRREL CAGE INDUCTION ENCL/EX-PROOF:IP66/EEx-d IIBT6 (Ex)ds BEARING MONITOR : SS316L

INSULATION CLASS : H : 180 SAFETY FEATURES

CONDUIT FOR MOTOR LEAD : 1" BSP 1. THERMOSTAT : INCLUDED

FOR THERMOSTAT : 3/4" BSP 2. BEARING MONITOR : INCLUDED

BEARING MONITOR: MECHANICAL TYPE 3. DRY RUN PROTECTION : OPTIONAL

WEIGHT OF THE PUMP MOTOR UNIT APPX.: 250Kgs. 4. PRESSURE TRANSMITER : OPTIONAL

PUMP TYPE : REVERSE CIRCULATION JACKETED PUMP 5. THERMOWELL + TT : OPTIONAL

*REMARKS:NPSH(A) at site should be at least 1m greater than NPSH(R) ADDITIONAL SCOPE

1. BASE PLATE : INCLUDED

2. FOUNDATION BOLTS : INCLUDED

3.COMPANION FLANGES : INCLUDED

PREPARED BY

HY-FM-03/R1 CHECKED BY

HYDRODYNE (INDIA) PVT. LTD. HYDRODYNE CANNED MOTOR PUMP SPECIFICATION DATA SHEET

PUMPING TEMP.(0C) : 5-30

MAX. ALLOWABLE PRESS. (kgf/cm2g) : 15

HYDROSTATIC TEST PRESS. (kgf/cm2g) : 22.5

THERMOSTAT TEMP.(0C)

HYDRODYNE