:: -

:

: Wellford 0.1: May 26, 2015

: 400.0 l/s: 47.00 m: 0.999: 1185 rpm

: 1: A-5996625: 300-DS-553

CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.

CustomerItem numberServiceFlowserve referenceDate

Pump speedSpecific gravityHeadCapacity

Number of stagesBased on curve no.Pump size & type

: Hydraulic Institute Level BTest tolerance

FlowSelex v2.2Copyright 2009 Flowserve. All rights reserved.

1 of 5

Hydraulic Datasheet

: Wellford 0.1: A-5996625: 300-DS-553

: May 26, 2015

Pump / StagesBased on curve no.Flowserve referenceDate

/ 1

: -

Customer reference:

Service :

Customer

Item number: Wellford

: 400.0 l/s: -

: -

: 47.00 m: -

: 10.2 m: -

: 0.0 barg

: Fresh water: 16 C: -

: 1.0 cP

: 247 hp: 1185 rpm: 78.7 %

: 5.0 m: 313 hp: 323 hp: 350 hp / 261 kW: 6.8 barg

: 23.0 barg: 35.0 barg

: FD1: -

: 551.0 mm: 600.0 mm: 488.0 mm: 12990 US units: 122.3 l/s: 69.10 m: 325.9 l/s: 122.7 %: -

: 91.8 %: 47.0 %

Operating Conditions Materials / Specification

Liquid

Other Requirements

Performance

CapacityWater capacity (CQ=1.00)Normal capacityTotal Developed HeadWater head (CH=1.00)NPSH available (NPSHa)NPSHa less NPSH marginMaximum suction pressure

Liquid typeTemperature / Spec. GravitySolid Size - Actual / LimitViscosity / Vapor pressure

Material column codePump specification

Hydraulic selection : No specification

Hydraulic powerPump speedEfficiency (CE=1.00)

NPSH required (NPSHr)Rated powerMaximum powerDriver powerCasing working pressure(based on shut off and Rated specific gravity @ Cut dia)

Maximum allowableHydrostatic test pressure

Impeller diameterRatedMaximumMinimum

Suction specific speedMinimum continuous flowMaximum head @ rated diaFlow at BEPFlow as % of BEPEfficiency at normal flowImpeller dia ratio (rated/max)Head rise to shut off

Construction : No specificationTest tolerance : Hydraulic Institute Level BDriver Sizing : Max Power(MCSF to EOC)with SF

0.999 /

/ 1.76 kPa.a / -

CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.

Est. rated seal chamb. press. : - Total head ratio (rated/max) : 76.6 %

FlowSelex v2.2Copyright 2009 Flowserve. All rights reserved.2 of 5

Construction Datasheet

: May 26, 2015

Pump / StagesBased on curve no.

: 300-DS-553

: Wellford 0.1Flowserve reference

/

Date

1: A-5996625

Pump / Stages

: May 26, 2015

CustomerCustomer reference

ServiceItem number

:

: -

: Wellford:

Face Pos'n350300

PN25PN25

RFRF

EndTop

: Foot: Other: Closed: NU217ECP: 1: 7217BECBP: 2: Grease: CW per Hyd. Institute

: -

: -

: -

: -

: -

: -

: -

:

: -

: 670.0 kg: -

: -

: -

: -

: -

: -

: FPD Std: -

:

: 350 hp / 261 kW

: -

: IEC

: -

: /: /

: Direct on line (DOL): Cl. F: 80 C: -

: -

: -

: -

: -

: -

: -

: /

: -

: -

: /: /: /

: None: -

: -

: -

: -

: -

-

-

-

-

-

-

: -

: /: /

Nozzles

Casing mountingCasing splitImpeller typeBearing type (radial)Bearing number (radial)Bearing type (thrust)Bearing number (thrust)Bearing lubricationRotation (view from cplg)

CasingImpellerCase wear ringImpeller wear ringInducerShaftSleeve

Baseplate typeBaseplate materialCoupling manufacturerCoupling sizeCoupling / Shaft guard

Bareshaft pump(nett)Baseplate(nett)Driver(nett)Shipping gross weight/vol.

Hydrostatic testPerformance testNPSH test

Pump paintBase grout surface prepShipment type

ManufacturerPower

BearingsLubricationMotor mounted by

Temperature rise

Amps-full load/locked rotorMotor startingInsulation

EnclosureHazardous area classExplosion 'T' ratingVolts / Phase / Hz

Speed

Driver TypeFrame-size / material

Service factor (req'st / act)

Driver, expectedPump & driver, estimated

ArrangementSize

Material code (Man'f/API)Internal neck bushing

Gland materialFlushVentDrainAuxiliary seal device

Seal flush planSeal flush constructionSeal flush materialAux seal flush planAux seal flush constructionAux seal flush material

Construction Driver Information

Materials

Baseplate, Coupling and Guard

Weights (Approx.)

Testing

Paint and Package

Sound Pressure (dBA @ 1.0 m)

Seal Information

Gland

Piping

Notes

: 770.5 kg / -

: 1.0 / -

: Horizontal / Foot

: - /

: 400 V / 3 / 50 Hz: - / -

: FPD Choice / FPD Choice: - / /

Orientation / Mounting

Manufacturer / Type

RatingSizeSuctionDischarge

Copyright 2009 Flowserve. All rights reserved. FlowSelex v2.23 of 5

:: -

:

: -

: 300-DS-553: 1185 rpm / 1: 400.0 l/s / 47.00 m: 350 hp / 261 kW /

: Wellford 0.1 : 400 / 3 / 50

: May 26, 2015

: FPD Choice: None

All dimensions are in millimeters unless otherwise specified: -

: -

Item number

ServiceCustomer PO #Flowserve reference

Customer

Volts / Phase / HzDriver power / FrameFlow / HeadPump speed / Stages Date

Certified by / Date :Seal typeSeal flush plan

Pump size & type Drawing number

Full Page GA Drawing

Copyright 2009 Flowserve. All rights reserved. FlowSelex v2.2

4 of 5

CustomerItem NumberServiceFlowserve ReferenceDate

:

: -

:

: Wellford 0.1: May 26, 2015 : 400.0 l/s

: 47.00 m: 0.999: 1185 rpm

CapacityHead

Specific gravity

: 1: A-5996625: 300-DS-553Pump size & type

Based on curve no.Number of stages

Pump speed

Copyright 2009 Flowserve. All rights reserved. FlowSelex v2.2

5 of 5