DrySeal Hatch Sealing Tape - ShipServDrySeal Hatch Sealing Tape DrySeal by Soprema is a self...
Transcript of DrySeal Hatch Sealing Tape - ShipServDrySeal Hatch Sealing Tape DrySeal by Soprema is a self...
Contact:Key Marine Direct Sales Ltd.
www.keymarine.caPhone: +1 604 281 1102
Fax: +1 778 279 7771
Email: [email protected]
DrySeal | Technical Data Sheet
Specifications
• Wintergradehatchcovertapeinrolls
• HightackSBSmodifiedbitumenwithapolyethylenecover
• Modernelastomericmodificationprocesscreates
ultimateflexibility
• Performswellinextremehighandlowtemperatures
(-45to90°C)
DrySeal Hatch Sealing TapeDrySeal bySopremaisaselfadhesive“wintergrade”hatchsealingtapemanufactured
inCanadafromSBSModifiedBitumen,waterresistant,elastomeric,anddurableandat
thecuttingedgeoftechnologytoday.Itisthepremiumsolutionforwaterproofingship’s
hatchcoversandensuringthatvaluablecargoesarrivedamagefreeatunloading.
Standard Product Dimensions and Packaging
IMPA Code 23 24 52 23 24 53
Width 100mm(4") 150mm(6")
Length 23meters(75') 23meters(75')
Rolls/Carton 3 2
Weight/box(lbs) 15.3lbs 15.3lbs
Weight/box(kg) 7.0kg 7.0kg
TotalLength/Carton
69m(226') 46m(151')
Key Marine Direct Sales Ltd. is a sales and marketing company that links North American manufacturers of marine products directly to the marine industry.
DrySealHatchSealingTape
Contact:Key Marine Direct Sales Ltd.
www.keymarine.caPhone: +1 604 281 1102
Fax: +1 778 279 7771
Email: [email protected]
DrySeal | Technical Data Sheet
DrySeal Hatch Sealing Tapemembranesareapplieddirectlytomarinevessel’ssteelhatchcovers.
1. Makesurethehatchcoversareclean,dryanddustfree.
2. Removeallpaintflakesandlooserustfromsurface.
3. Unroll,alignandcutDrySealintorequiredlengths.
4. Peelbackabout150mm(6-inch)ofreleasesheet.
5. AlignDrySealandinstallbypeelingbackthereleasesheetto
adheretosurface.
6. Stepfirmlyalongthestripuntiltapeisfullyadheredtothesurface.
Properties• Dimension(m) –22.9x0.15(75ftx6")
–22.9x0.10(75ftx4")
• RollWeight(kg) –6"-3.5(7.6lb)
–4"-2.33(5.1lb)
• Underface(completeroll)–Siliconereleasepaper
• Underface(pre-cutroll)–Siliconereleaseplasticfilm
• Topface–Tri-laminatewovenpolyethylene
• Storage–Uprightonpallet
• Tensilestrength,MD/XD(kN/m)ASTMD514711.3/15.4(64/88lb/in)
• Tensilestrength,MD/XD(MPa)ASTMD41211.2/13.1
• Ultimateelongation,MD/XD(%)ASTMD514740/25
• Ultimateelongation,MD/XD(%)ASTMD41288/55
• Flexibilityatcoldtemperature(°C)ASTMD5147-35(-31°F)
• Staticpuncture(N)ASTMD5602400(90lb)
• Staticpuncture(N)ASTME154747(168lb)
• Tearresistance,MD/XD(N)ASTMD5601375/400(84/90lb)
• Lapadhesion(N/m)ASTMD18762000(11.4lb/in)
• Waterabsorption(%)ASTMD51470.1max
• Peelresistance(N/m)ASTMD9032800(16lb/in)
• Watervapourpermeance(ng/Pa·s·m2)ASTME96 (ProcedureB)<0.90(<0.016perm)
• Airpermeability,75Pa(L/s·m2)ASTME283<0.0003
• Airpermeability,75Pa(L/s.m2)ASTME21780.0013 (0.00025cfm/ft²)
• ResistancetogustwindloadASTME330(3000Pa–10s)Nosignofdelaminationnorvariationintheairpermeability
• ResistancetosustainedwindloadASTME330(100Pa–1h)Nosignofdelaminationnorvariationintheairpermeability
FormoreinformationaboutSOPREMA,pleasevisitthewebsite: www.soprema.ca
Right:
1) Torch and laying down of the dry seal
2) Pressing down after torch on dryseal
3) Finished product ready for voyage
Installation
1
2
3