Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30...
Transcript of Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30...
![Page 1: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/1.jpg)
DryingDrying
Wood drying should be used seasoning Wood drying should be used seasoning for decreasingfor decreasing moisture content in wood lesser than 30 moisture content in wood lesser than 30 % for 1 month,% for 1 month,
then drying with kiln drying for 1 month.then drying with kiln drying for 1 month.Lumber should be control drying at surface, not rapidity Lumber should be control drying at surface, not rapidity
dried. dried. If moisture content in wood and surface of wood are If moisture content in wood and surface of wood are
difference moredifference more than 5 %, wood stress due to wood than 5 %, wood stress due to wood failure, e.g. bow,failure, e.g. bow, case hardening, and honeycombing. case hardening, and honeycombing.
![Page 2: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/2.jpg)
DryingDrying
• But some wood failure occurred from natural But some wood failure occurred from natural property of wood, e.g. grain and age,property of wood, e.g. grain and age,
• that fast growing species such as Eucalyptus and that fast growing species such as Eucalyptus and SaDuaTium, due to stress in wood, emphasize high SaDuaTium, due to stress in wood, emphasize high
growth stress of young tree. growth stress of young tree. • That is easily the end split. That is easily the end split.
• Therefore, the end of lumber should be printcoat Therefore, the end of lumber should be printcoat for decreased evaporate moisture from wood. for decreased evaporate moisture from wood.
• In addition to, piling should be used stick at the In addition to, piling should be used stick at the end of lumber and pressed on the top by weight.end of lumber and pressed on the top by weight.
![Page 3: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/3.jpg)
III. Processing and UtilizationIII. Processing and Utilization
• 1. Primary processing1. Primary processing• 1.1 Sawing1.1 Sawing• 1.2 Wood preservation1.2 Wood preservation
• 2. Secondary processing2. Secondary processing• 2.1 Furniture manufacturing2.1 Furniture manufacturing• 2.2 Wood-based panels manufacturing2.2 Wood-based panels manufacturing• 2.3 Pulp and paper manufacturing2.3 Pulp and paper manufacturing• 2.4 Charcoal production2.4 Charcoal production
![Page 4: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/4.jpg)
FurnitureFurniture
•1) Stable furniture or Furnished furniture1) Stable furniture or Furnished furniture
•2) Knock down furniture2) Knock down furniture
•1) Usage skilled labor more than unskilled labor1) Usage skilled labor more than unskilled labor
•2) Manufacturing by machine2) Manufacturing by machine
•3) Manufacturing by machine more than skilled labor3) Manufacturing by machine more than skilled labor
![Page 5: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/5.jpg)
Wood-based panelsWood-based panels
• - Veneer and plywood- Veneer and plywood• - Composite board- Composite board• - Fiberboard- Fiberboard• - Particleboard- Particleboard• - Wood cement board- Wood cement board
![Page 6: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/6.jpg)
Veneer and plywood
• The shortage of large log, due to some The shortage of large log, due to some factory changed peeling machine from 8 ft. factory changed peeling machine from 8 ft. to 4 ft. length and slicing machine for the to 4 ft. length and slicing machine for the
thinnest veneer, 0.1 mm. thickness. thinnest veneer, 0.1 mm. thickness.
• Some factory imported log for veneer Some factory imported log for veneer production and re-export or overlay on production and re-export or overlay on
wood products of factory. wood products of factory.
![Page 7: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/7.jpg)
Composite board
• Flooring (parquet and mosaic parquet) and block Flooring (parquet and mosaic parquet) and block board are common technology. board are common technology. • by finger joint technique. by finger joint technique.
• Raw materials are Teak and Eucalyptus from Raw materials are Teak and Eucalyptus from plantation, rejected wood in flooring production 20-plantation, rejected wood in flooring production 20-
25 % and 50-60 %, respectively.25 % and 50-60 %, respectively.• Colour coating need to production because of still Colour coating need to production because of still
sapwood (cream colour), that difference from sapwood (cream colour), that difference from heartwood (dark colour).heartwood (dark colour).
![Page 8: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/8.jpg)
FiberboardFiberboard
• Hardboard and Medium Density Fiberboard (MDF). Hardboard and Medium Density Fiberboard (MDF).
• All of Hardboard in Thailand produce with wet All of Hardboard in Thailand produce with wet process. process.
• Raw materials of Hardboard are Eucalyptus and wood Raw materials of Hardboard are Eucalyptus and wood from plantation e.g. KraTinTaPa (Acacia sp.) and also from plantation e.g. KraTinTaPa (Acacia sp.) and also
Bagasse. Bagasse.
• Raw materials of MDF are Rubberwood, Eucalyptus, Raw materials of MDF are Rubberwood, Eucalyptus, KraTinTaPa, and Bagasse (MDF, which Bagasse used KraTinTaPa, and Bagasse (MDF, which Bagasse used
the first factory of the world).the first factory of the world).
![Page 9: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/9.jpg)
ParticleboardParticleboard
• **Particleboard used as raw material for construction Particleboard used as raw material for construction and furniture production because of decreasing of solid and furniture production because of decreasing of solid
wood and logging ban in 1989. Due to particleboard wood and logging ban in 1989. Due to particleboard used increasing in wood working.used increasing in wood working.
• Extruded pressed processing used only one factory. Extruded pressed processing used only one factory. Another factory used platen pressed processing. Another factory used platen pressed processing.
• Raw materials are Rubberwood, Eucalyptus and Raw materials are Rubberwood, Eucalyptus and Bagasse. 3 layers sheet, 12 and 16 mm. thickness, is Bagasse. 3 layers sheet, 12 and 16 mm. thickness, is
characteristically of particleboard in Thailand. characteristically of particleboard in Thailand.
![Page 10: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/10.jpg)
Wood cement board• Raw material of Wood Wool Cement Board is SomPhong (Tetrameles nudiflora
R.Br.), import from Myanmar, today.
Wood Cement Particleboard produced from Eucalyptus.
Wood Cement Fiberboard, plank for wall house, produced from cement approximately 90 % and
recovered paper approximately 10 % with mixed a little asbestos.
![Page 11: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/11.jpg)
Pulp and paper
• Raw materials ; non-wood (e.g. Straw, Bamboo, Raw materials ; non-wood (e.g. Straw, Bamboo, Kenaf and Bagasse) and wood (Eucalyptus). Kenaf and Bagasse) and wood (Eucalyptus).
• That is short fiber, so Thailand must imported That is short fiber, so Thailand must imported long fiber and also recovered paper.long fiber and also recovered paper.
![Page 12: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/12.jpg)
• All pulp factories produce with chemical process All pulp factories produce with chemical process except one factory produced pulp with except one factory produced pulp with
semichemical process yield approximately 45 %. semichemical process yield approximately 45 %.
• The products are kraft paper 50 % and other The products are kraft paper 50 % and other papers : printing-writing paper, paperboard, papers : printing-writing paper, paperboard,
newsprint paper, household and sanitary paper newsprint paper, household and sanitary paper etc.etc.
![Page 13: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/13.jpg)
Charcoal• It’s produced with soil or
rice husk mound and mud beehive.
• Commercial charcoal produced usually with brick beehive.
Now, lapwood of Eucalyptus from plantation widespread produced charcoal and briquett for export. In addition to, activated carbon produced from charcoal for industry.
![Page 14: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/14.jpg)
• Each year, Thailand has consumption charcoal 3 million kg. Demand of charcoal for export is
large scale.
• Recovery rate of charcoal production is 30-35 % Recovery rate of charcoal production is 30-35 % of wood at oven dry weight. of wood at oven dry weight.
• Pile of Eucalyptus 1 cu.m. can be produced Pile of Eucalyptus 1 cu.m. can be produced charcoal 120 kg. Heat value of Eucalyptus charcoal 120 kg. Heat value of Eucalyptus
charcoal is 7.35 kg.cal/g. charcoal is 7.35 kg.cal/g. • The highest heat value is charcoal from The highest heat value is charcoal from KongKang (Rhizophora sp.), 7.50 kg.cal./g.KongKang (Rhizophora sp.), 7.50 kg.cal./g.
![Page 15: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/15.jpg)
IV. Markets and Socio-Economics• Wood consumption in Thailand is about 3-4 million cu.m./year. • Imported wood and wood products : (1999)
• 1. Log 0.47 million cu.m. cost $ 80.8 million and sawntimber 1.25 million cu.m. cost $ 169.9 million.
• 2. Wood productions : plywood, particleboard, fiberboard, parquet, fuelwood, charcoal, furniture, door, window, etc total cost $ 28.9 million.
• 3. Pulp 438,525 tons of total cost $ 177.5 million.
• 4. Paper 365,208 tons of total cost $ 362.8 million.
0
50
100
150
200
250
300
350
400
Value
Log
Sawtimber
Woodproducts
Pulp
Paper
$ million.
![Page 16: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/16.jpg)
IV. Markets and Socio-Economics
• The averaged increasing of Thailand’s population is 1.2 % per year. In 1985, Thailand has 53 million populations and increased to 61
million in 1999, • therefore, the demand in wood and wood products consumption increased every year.
• The country’s capacity to produce and reforest cannot meet the demand so the price of wood
and wood products still high.
![Page 17: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/17.jpg)
Sawmills and Wood working factories
Bangkok
Central region
Northern region
Notheastern region
Southern region
Small factory
Medium factory
Large factory
Bangkok 38 %
Central region 33 %
Northeastern region 10 %
Southern region 10 %
Northern region 8 %
LOCATION
SIZE OF FACTORY
89 % of these factories are the small factory, 10 % of medium factories and only 1 % of the large factories.
Total 6,911 factories,
6,342 of furniture factories
![Page 18: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/18.jpg)
Investment and Labors
• The capital investment cost $ 1,085 million, which 176,000 labors were
employed.
• 262 of 2,692 furniture factories are the factories which used Rubberwood for
furniture production and employ 68,992 labors.
![Page 19: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/19.jpg)
Eucalyptus wood marketing
Table 10 Expense in plantation per rai of Eucalyptus for 5 years of Thailand, 1999
Item Cost (baht)1. Seeding (270 units) 2702. Post planting care (5 years) 2,5003. Fertilizer 3754. Felling (16.65 tons x 75 baht) 1,2495. transportation (16.65 tons x 225 baht) 3,746Total 8,140
Note : 45 baht = $ 1Source : Forest Products R&D Division, 1999
• Eucalyptus aged 5 years gave wood 16.65 tons/rai.
• The total capital were 8,140 baht/rai.
• The selling price of log was 850 baht/ton, thus, the income was 14,152 baht and the net profit was 6,012 baht,
• that the averaged income per year total 1,200 baht/rai.
![Page 20: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/20.jpg)
The price of the thinning teak wood
• from the FIO (Forest Industry Organizaion) • at girth 30-140 cm. and 2-6 m. length will cost
2,100-18,400 baht/cu.m.
![Page 21: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/21.jpg)
Import and export Thailand’s wood products for the wood industry
• 1. Lumber Industry
• 2. Furniture Industry
• 3. Wood products industry for household
• 4. Pulp and paper industry
![Page 22: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/22.jpg)
2243
214
16 0 8
2311
2 11 11 1630
1812 4
36
6
44
3
80
152
52
127
0
20
40
60
80
ASEAN
E.U.
JAPAN
ASEAN U.S.A E.U. OTHERS JAPAN
80
60
40
20
0
%
In 1999, the imported value cost $ 51.11 million.
The important to import lumber are ASEAN (80 %), U.S.A. (12 %), European Union (2 %), and other
countries (6 %).
ASEAN (80 %)U.S.A. (12 %)
E.U. (2 %)OTHERS (6 %)
Lumber Industry
![Page 23: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/23.jpg)
2243
214
16 0 8
2311
2 11 11 1630
1812 4
36
6
44
3
80
152
52
127
0
20
40
60
80
ASEAN
E.U.
JAPAN
ASEAN U.S.A E.U. OTHERS JAPAN
80
60
40
20
0
%
The exported value was $ 103.23 million, the important country to export were Japan (22 %),
ASEAN (15 %), European Union (11 %) and U.S.A. (4 %).
Japan (22 %)
ASEAN (15 %)
E.U. (11 %)U.S.A. (4 %)
Lumber Industry
![Page 24: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/24.jpg)
Furniture Industry
2243
214
16 0 8
2311
2 11 11 1630
1812 4
36
6
44
3
80
152
52
127
0
20
40
60
80
ASEAN
E.U.
JAPAN
ASEAN U.S.A E.U. OTHERS JAPAN
80
60
40
20
0
%
In 1998, the total exported furniture value was $ 434.92 million,
60 % of Rubberwood furniture, 30 % of particleboard and MDF furniture
and 10 % of hardwood furniture.
JAPAN (43 %)
U.S.A. (36 %)E.U. (11 %)
OTHERS (8 %)
ASEAN (2 %)
![Page 25: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/25.jpg)
Wood products industry for household
2243
214
16 0 8
2311
2 11 11 1630
1812 4
36
6
44
3
80
152
52
127
0
20
40
60
80
ASEAN
E.U.
JAPAN
ASEAN U.S.A E.U. OTHERS JAPAN
80
60
40
20
0
%
The import value in 1989 were $ 34.88 million by import
plywood, veneer and other products
ASEAN (52 %)
OTHERS (23 %)E.U. (16 %)
U.S.A. (6 %)
JAPAN (2 %)
![Page 26: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/26.jpg)
2243
214
16 0 8
2311
2 11 11 1630
1812 4
36
6
44
3
80
152
52
127
0
20
40
60
80
ASEAN
E.U.
JAPAN
ASEAN U.S.A E.U. OTHERS JAPAN
80
60
40
20
0
%
The export, in 1989, were $ 293.21 million ;
U.S.A. (44 %)E.U. (30 %)
JAPAN (14 %)OTHERS (11 %)
ASEAN (1 %)
Wood products industry for household
The handicraft such as the plates produced from Rubberwood, the decoration : frame, carved wood, which always produced from Mango wood and Teak.The exported were 80 % and used in domestic only 20 %.
![Page 27: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/27.jpg)
Pulp and paper industry
2243
214
16 0 8
2311
2 11 11 1630
1812 4
36
6
44
3
80
152
52
127
0
20
40
60
80
ASEAN
E.U.
JAPAN
ASEAN U.S.A E.U. OTHERS JAPAN
80
60
40
20
0
%
The value of thailand’s export pulp, paper, and paper products such as household and sanitary paper were $ 463.58 million,
ASEAN (27 %)
E.U. (18 %)U.S.A. (3 %)
JAPAN (1 %)
![Page 28: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/28.jpg)
• Thailand have of import pulp especially long fiber from U.S.A., Canada, and Africa total
value cost $ 168.95 million • and also import paperboard, box, kraft paper,
printing-writing paper, newsprint paper, and sanitary paper etc.
• In 1988, the total value were $ 35.92 million.
Pulp and paper industry
![Page 29: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/29.jpg)
V. Policy and Legislation
• 1. Forestry Act
• 2. National Forest Policy
• 3. Thai Forestry Sector Master Plan
• 4. Funding support
• 5. The composed cooperatives
• 6. Reformation in the Industrial Structure
• 7. Tariff measurement
![Page 30: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/30.jpg)
1. Forestry Act
• The Forestry Act 1941 for protect the selection cutting and illegal logging. The
mentioned law did not support to the present wood industry development.
• The act improvement is quite difficult and more complex, thus the promulgated
the new act is the success way, for example The Forest Plantation Act 1992
![Page 31: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/31.jpg)
2. National Forest Policy
• Created in 1983 for the long term in forest resources management and development were
concerned about this issue :• - government organization, private and
community sector • - wood industry
• - reforestation, plantation• - etc
![Page 32: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/32.jpg)
3. Thai Forestry Sector Master Plan
• formulated during 1990-1993 by the technical assistant of the Finland
government.
• for solving the problem of the short of wood and strengthen the confidence on
the raw materials by the management of forest plantation, community forest and
private forest. (within 2010)
![Page 33: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/33.jpg)
4. Funding support
• from the Agriculture and Cooperatives Bank and the Japan Oversea Economic
Cooperative Funding (OECF)• but the rules and conditions is complex
• In conclusion, the funding which the farmer received was only 3,000 baht/rai from the Farmer Extension for Forest
Plantation Project.
![Page 34: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/34.jpg)
5. The composed cooperatives
• For the forest plantation farmer to compose and set the cooperatives in each
province. • The targets of the cooperatives are for
log selling and wood industries for producing to support domestic demand
and export. • There are 30 cooperatives, at present
(Thailand has 76 provinces).
![Page 35: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/35.jpg)
6. Reformation in the Industrial Structure
• The Ministry of Industry hold a meeting to discuss for the new structure of
Thailand industry :
• For the problems and create the strategies on Thailand’s wood products
and furniture industry
![Page 36: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/36.jpg)
7. Tariff measurement
• The tariff measurement appointed the tax of exported log and lumber 40 %, and 10 % for
the unsuitable wood for wood production. • The imported wood products can be locally
produced is 20 % and 10 % of them which cannot locally produced.
![Page 37: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/37.jpg)
VI. Institutional Capacity• 1. Planning sector
– 1.1 The National Research Council of Thailand
– 1.2 The Forestry Research Office
• 2. Operating sector – 2.1 Forest Products R&D Division (FPRD)
– 2.2 Kasetsart University (KU) • 2.2.1 Forest Products Division, Faculty of Forestry
• 2.2.2 Pulp/paper and Wood Composites Research Unit
![Page 38: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/38.jpg)
National Research Council of National Research Council of ThailandThailand
• For the National Research in 4 directions :For the National Research in 4 directions :• 1)1) self dependence country self dependence country
• 2)2) improvement in productivity and value improvement in productivity and value added added
• 3)3) improvement in quality of life, social, improvement in quality of life, social, and environmentand environment
• 4) information reception in country ability4) information reception in country ability
![Page 39: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/39.jpg)
Forestry Research Office
• 3 policy of planning in R&D as follows :3 policy of planning in R&D as follows :• 1)1) forest conservation and protection planforest conservation and protection plan
• 2)2) forest resource processing and utilization forest resource processing and utilization planplan
• 3)3) sustainable forestry management plansustainable forestry management plan• Wood utilization program is appointed for the Wood utilization program is appointed for the purpose of developing new efficient technology for purpose of developing new efficient technology for
local wood sp. instead of imported wood. local wood sp. instead of imported wood.
![Page 40: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/40.jpg)
Forest Products R&D Division (FPRD)
• FPRD is directly responsible to study to FPRD is directly responsible to study to products: products:
• - properties of wood, - properties of wood, • - wood products, - wood products, • - wood and non-wood industry, - wood and non-wood industry, • - non-wood utilization, - non-wood utilization, • - other materials instead of wood, - other materials instead of wood,
• - energy from wood or residual agriculture.- energy from wood or residual agriculture.
![Page 41: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/41.jpg)
Kasetsart University (KU)
• 2.2.1 Forest Products Division, Faculty of 2.2.1 Forest Products Division, Faculty of ForestryForestry
• the majority to produce graduate in wood the majority to produce graduate in wood industry for government office and industry for government office and
emphasize wood industrial company. emphasize wood industrial company. • graduated of wood science and technology. graduated of wood science and technology.
And start up in this year for graduated of And start up in this year for graduated of pulp and paper technologypulp and paper technology
![Page 42: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/42.jpg)
Pulp/paper and Wood Composites Research Unit
• supported by Japan International supported by Japan International Cooperation Agency (JICA). Cooperation Agency (JICA).
• Study to wood and residual Study to wood and residual agriculture, developing new technology agriculture, developing new technology
for pulp and paper, and wood for pulp and paper, and wood composite board. composite board.
![Page 43: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/43.jpg)
Company of wood industry Company of wood industry
• has R&D unit, only large factory. has R&D unit, only large factory.
• The main target of study for received The main target of study for received product standard and decrease product standard and decrease
production cost. production cost.
• Some issue they study with FPRD and Some issue they study with FPRD and KU.KU.
![Page 44: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/44.jpg)
VII. Overview and Conclusion
• THAILAND
• area 51,311,502 hectares
• population 61.7 million.
• Forest area 12,972,200 hectares (25.28 %)
• to increase forest lands to 40 %
• wood consumption is 0.2 cu.m./year/person or 12.34 million cu.m./year.
• logging ban in 1989,
• imported wood and wood products over than $ 800 million.
![Page 45: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/45.jpg)
VII. Overview and Conclusion
• Wood shortage is still a major problem for related industries.
• At present, there is an attempt to develop • Rubberwood species for timber,
• high yield of fiber from Eucalyptus, including to add more value for wood from plantation to
furniture and flooring industries. • Teak from thinning period is found to be too
small and low recovery rate
![Page 46: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/46.jpg)
VII. Overview and Conclusion
• Thailand has a privilege for plantation due to its location.
• Only 4-6 years for fast growing species and 30-40 years for normal
trees, harvesting can be done
![Page 47: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/47.jpg)
Model of Wood Utilization
• The best way to use a tree is to consider how to efficiently use every part of the tree such as root, stump, log and branches, which manufacturing
process has to be employed. Wood may be dried and preserved to make it strong and last longer time.
• Lapwood can be used for tools, wood products, parquet, woodfuel, charcoal and chipwood. Stumps and branches can be used as woodfuel
and chipwood, as well, for large scale of industries of wood chemical products, pulp and paper, fiberboard, which made from chipwood through defibration process. Chipwood, also can be dissolved into
particle, without defibrator, mixed with resin and cement for particleboard and wood cement board, respectively.
• Timber can be added for highest value by using as veneer or plywood. Core and lapwood from the veneer process can be used as chipwood.
Moreover some parts of wood from the process can be raw material for carving as well. Small log can be used as poles for construction.
• As mentioned above, the uses of wood will be efficient and intelligent if there are industries to support or so called “Integrated Wood Industries”.
![Page 48: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/48.jpg)
Model of Wood Utilization
Log
Branches
Stump/Root
Sawmill
Peeling/Slicing
Lumber
Drying
Preservation
Furniture
Constructed lumber
Household utensils
Lapwood
Flooring/Parquet
Fuelwood
Chipper
Chipwood Carved wood
Veneer
PlywoodCore/Veneer
residue
ParticleboardCement-bonded Particleboard
Defibrator
Pulp & PaperFiberboard
Wood Chemical
Wood-wool CementboardPole/
Post
![Page 49: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/49.jpg)
VII. Overview and Conclusion
• Due to economic crisis in Thailand, last 5 years there was decreasing of wood and
wood products.
• On the other hand export of such was increasing.
• This may be results from industrial and economic reform.
![Page 50: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/50.jpg)
VII. Overview and Conclusion
• At present, • there is a concept to encourage local people to
live on their feet. • The attitudes of using local products or their
household products are arising. • The government has also launched a campaign
namely “One village, one product” to promote indigenous knowledge to create their own
specific product.
![Page 51: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/51.jpg)
VII. Overview and Conclusion
• For International Role on wood industry, • Thailand has joined the Commission on Sustainable
Development (CSD) to pursue sustainable wood industries and make an agreement done on February
1997 in New York,
• following the proposal of Open-ended adhoc Intergovernmental Panel on Forests (IPF) to conduct
sustainable forest management for wood industry in all aspect;
• business, environment, products and services from the forest.
![Page 52: Drying l Wood drying should be used seasoning for decreasing moisture content in wood lesser than 30 % for 1 month, then drying with kiln drying for 1.](https://reader035.fdocuments.net/reader035/viewer/2022062216/56649caf5503460f94972d38/html5/thumbnails/52.jpg)
THANK YOU
FROM
THAILAND