DRYING · 12 units on 53' flatbed can be loaded in a standard US tractor ... Portable...
Transcript of DRYING · 12 units on 53' flatbed can be loaded in a standard US tractor ... Portable...
DRYING
LGR Dehumidifiers
Desiccant Dehumidifiers
Air Scrubbers
Air Movers
Speciality Restoration
Moisture Control
Containment Wall System
hercrentals.com Call 888-777-2700 for rates and reservations.
DESICCANT DEHUMIDIFIERARID-DRY/MS-7500
PROSOLUTIONS
All The Gear You Need.
Call 888-777-2700 for rates and reservations56
DRY
ING
+ R
EMED
IATI
ON
DRI-EAZ/7000XLIDRI-EAZ/REVOLUTION LGR
• Removes 16 gallons per day• Self-monitoring system • Built-in humidistat
• Removes 8 gallons per day• Can be stacked to double footprint • Displays temperature and RH in real time
MAKE MODEL MOISTURE REMOVAL (MAX)
MOISTURE REMOVAL (AT AHAM) CFM RATING AMP RATING DIMENSIONS (LWH) WEIGHT CAT CLASS
Dri-Eaz Revolution LGR 10.1 Gal/Day 8 Gal/Day 121-180 6.2 22" x 18" x 13" 65 lbs 719-2020
Dri-Eaz 7000XLI 29.3 Gal/Day 16.2 Gal/Day 325 8.3 20" x 20" x 33.5" 107 lbs 719-2040
PHOENIX/D850
• 850 cfm• 208-240VAC 50/60HZ 1PH in 30A or 50A• 6 inch reactivation outlet• 62 gallons/day at AHAM moisture removal
DRI-EAZ/DriTec 4000i
• 395 cfm• Runs off (2) 115V plugs - requires separate circuits• 14 Gal/day at AHAM moisture removal
DEHUMIDIFIERS LGR
DEHUMIDIFIERS DESICCANT
MAKE MODEL MOISTURE REMOVAL (MAX)
MOISTURE REMOVAL (AT AHAM) CFM RATING AMP RATING DIMENSIONS
(LWH) WEIGHT CAT CLASS
Dri-Eaz DriTec 4000i N/A 14 Gal/Day 395 12 or 24 20" x 21" x 33" 95 lbs 719-2060
Phoenix D850 62 Gal/Day 46 Gal/Day 850 30 or 50 23" x 20" x 41" 153 lbs 719-2080
HercRentals.com 57
DRYIN
G + REM
EDIATIO
N
ARID-DRY/MS-7500
• 5500 - 7500 cfm in one machine• Allows placement in confined spaces• 8 inch rated extended static pressure
ARID-DRY/MS-2400
• Variable-frequency drive for cfm control from 1,000 to 2,400 cfm
• Electric reactivation
MAKE MODEL MOISTURE REMOVAL (MAX)
MOISTURE REMOVAL (AT AHAM) CFM RATING AMP RATING DIMENSIONS
(LWH) WEIGHT CAT CLASS
Arid-Dry MS-2400 230 Gal/Day 158 Gal/Day 2,400 60 92" x 35" x 63" 1,110 lbs 719-1010
Arid-Dry MS-7500 735 Gal/Day 577 Gal/Day 7,500 179 100" x 50" x 96" 4,400 lbs 719-1030
12 units on 53' flatbed can be loaded in a stan-dard US tractor trailer or 40-foot ocean container
Storage/Truckload:
DRI-EAZ/ACE TURBODRYER DRI-EAZ/VELO AIRMOVER
• Structural drying, carpet and hard floor cleaning, ventilation• Dry fast with powerful 1881 cfm • Compact design - stackable for operation
• 885 cfm • Daisy chain up to 6 units per 15 amp circuit for 5,400 cfm• Low profile with great portability
MAKE MODEL CFM AMPS DIMENSIONS (LWH) WEIGHT CAT CLASS
Dri-Eaz Ace TurboDryer 1,881 1.5 19" x 24" x 20.3" 33 lbs 925-3263
Dri-Eaz Velo Airmover 885 1.9 24" x 9" x 18" 21 lbs 925-3250
AIR MOVERS
DEHUMIDIFIERS DESICCANT
Call 888-777-2700 for rates and reservations58
DRY
ING
+ R
EMED
IATI
ON
ABATEMENT/BD2KM
• Two speed airflow 1,300 cfm (Low) & 2,000 cfm (High)• 12 inch exhaust collar • Visual "Change Filter" indicator lamp
DRI-EAZ/HEPA 500
• Maintains desired airflow and negative pressure • Compact design for easy transport • Daisy chain up to 4 units on (1) 115V 15 Amp outlet
MAKE MODEL MAX CFM FILTRATION POWER / AMP RATING DIMENSIONS WEIGHT CAT CLASS
Dri-Eaz DefendAir HEPA 500 500 2-Stage 115 V / 3 Amps 18.2" x 26.2" x 24.6" 44 lbs 925-3310
Abatement Technologies PRED750 750 3-Stage 115V / 1.9 Amps 25.5" x 19.5" x 20.5" 35 lbs 925-3312
Abatement Technologies BD2KM 2,000 3-Stage 115 V / 10 Amps 39.5" x 28.5" x 31.7" 117 lbs 925-3316
Abatement Technologies PAS2400 2,100 4-Stage 115 V / 12 Amps 31.5" x 25.3" x 49.8" 170 lbs 925-3318
International Ozone TITAN 4000 5,000 N/A 115 V / 4 Amps 26" x 26" x 12" 38 lbs 700-1725
Husqvarna A 1200 1,200 2-Stage 120 V / 4.9 Amps 18" x 27.5" x 32" 84 lbs 925-3314
INTERNATIONAL. OZONE / TITAN 4000 HUSQVARNA / A 1200
• Hydroxyl Generator for air purification/deodorizing • Can treat up to 40,000 cubic feet • Optimal results by pairing with the Cold Vapor Injector
• Lightweight and sturdy• Warning lights and alarms• Two-stage filtration
AIR SCRUBBERS
HercRentals.com 59
DRYIN
G + REM
EDIATIO
N
MAKE MODEL PRESSURE RATING FLOW CAPACITY DIMENSIONS (LWH) WEIGHT INLET/OUTLET
NU-ICE AGECommad Air350
232 psi MAX233 SCFM @ 100 psi 252 SCFM @ 232 psi MAX
48" x 26.6" x 18.8" 180 lbs 1.5 NPT F in 1" NPT F out
MAKE MODEL HOPPER CAPACITY
DRY ICE CONSUMPTION OPERATING RANGE BLASTING
PRESSURE DIMENSIONS (LWH) WEIGHT CAT CLASS
NU-ICE AGE Commando AP 40 lbs 0-425 lbs/hr 60-250 psi @85-185 cfm 60-250 psi 32"x20"x36.3" 168 lbs 100-5150
NU-ICE AGE Commando 75 75 lbs 0-425 lbs/hr 70-250 psi @ 375 cfm 70-250 psi 35" x 23.3" x 38.8" 225 lbs 100-5155
NU-ICE AGE/COMMANDO AP
NU-ICE AGE/COMMAND AIR350
Every Dry Ice blaster needs an aftercooler to ensure that dry, cool air is flowing into the machine. The COMMAND Air 350 ensures proper intake for your dry ice blaster.
Portable Aftercooler/Dryer• Sanitary cleaning of food
processing equipment• Weld cell cleaning, inc.
automation equipment• Production & packaging
equipment• Ventilation systems• Automotive parts• Tire & rubber molds• Core boxes, aluminum molds• Commercial printing presses• Fire & historical restoration• Mold remediation• Paper mills and paper related
manufacturing• Electrical and power generation
equipment• Graffiti removal• Cemeteries & monuments• Removal of fiberglass resin• Restaurants & bakeries - grills,
ovens, vents• Dry docking - commercial &
military• Commercial & military aircraft• Wine barrels• Asphalt & concrete trucks and
equipment
Applications:
PACKAGE
Includes:
• Environmentally friendly - no chemicals or harmful vapor• Non-abrasive, nonflammable and nonconductive• Does not generate any secondary waste• A 375 cfm air compressor is highly recommended for the Commando AP and
required for the Commando 75• Removes residue, spatter, slag, grease, contaminants, oils, mold and more• FDA approved method for the food & beverage industry• A Command Air350 Aftercooler is included in the Blaster rental package
SPECIALITY RESTORATION
Call 888-777-2700 for rates and reservations60
DRY
ING
+ R
EMED
IATI
ON
CONSTRUCTION DRYING
We can assist with:• Drywall joint compound drying too slowly• Excess moisture in concrete not allowing floor
coverings or adhesives to be installed• Warping of mill work & other wood products• Visible signs of mold on a project• Condensation on cool surfaces• Paints & other coverings drying too slowly• Project that is running behind schedule due to
moisture/temperature issues
Management Plan can help:• Keep construction schedule on track• Improve the quality of material installation• Maintain a “clean” building by dramatically
reducing the potential of mold growth• Eliminate moisture regain• Preserve new HVAC equipment and ducting
(no need to turn system on)• Remediation of water damage events during the
construction process/before occupancy
DEHUMIDIFICATION: Desiccant Dehumidifiers Sizes from 385 cfm to 5,000 cfm in a single unit
Refrigerant Dehumidifiers Portable LGR’s run on 110V
HEATING:Indirect & Direct Fired Heaters Heaters with BlowersInline Electric Heaters
COOLING: Air Conditioning Chillers (Air-Cooled & Water Cooled)Portable Spot Coolers
POWER:Generators – 20kW to 1000kWDistribution PanelsStringer Boxes
VENTILATION:Air-ScrubbersAir-MoversAxial FansBlower Only Units
Herc ProSolutions delivers the level of service that you deserve. We are available 24/7 to assist you. We work around your schedules. We strive to meet the level of attention you need, meaning that we can deliver and set-up all the equipment, train staff on operation and regularly monitor conditions, or we can simply drop-off what you need. You decide!
MOISTURE CONTROLControl the Moisture. Control the Climate. Build Healthy. Build On-Time.
You always want the best for your business, we believe
you deserve even better. That's why we’ve created a
partnership program that will earn us your business and
make Herc Rentals your indispensable partner of choice.
The best team, better
The best gear, better
The best service, better
For more information contact [email protected] to begin your Herc Plus partnership
Call 888-777-2700 for rates and reservations62
DRY
ING
+ R
EMED
IATI
ON
CONTAINMENT WALL SYSTEM
MODEL DETAILS CAT CLASS
S3-WM-12 12” width / 10’ -3” max height 913-6050
S3-WM-18 18” width / 10’ -3” max height 913-6055
S3-WM-24 24” width / 10’ -3” max height 913-6060
S3-WM-32 32” width / 10’ -3” max height 913-6065
S3-WM-42 42” width / 10’ -3” max height - Standard 913-6070
STARC/WALL PANELS
• Adjustable height• Air tight seal• Multiple widths• Sound attenuating
TEMPORARY WALL CONTAINMENTScan code to see how easy it is to eliminate disruptive renovations
WATCH VIDEO
12 18 24 32 42
STANDARD SIZE
HercRentals.com 63
DRYIN
G + REM
EDIATIO
N
CONTAINMENT WALL SYSTEM
RIGHT/LEFT WALL INTERFACEACCESSORY CART MOBILITY CART
RL
MODEL DETAILS CAT CLASS
S3-AIR-24 24” Width / 12”adjustable duct vent / 10’-3” max height 913-6080
S1-RPM-RT1 ABATEMENT standard single room wall mounted differential pressure monitor 913-6075
PRESSURE PORTS PRESSURE MONITOR STANDARD DUCT COLLAR
STARC/NEGATIVE AIR PANELS
STARC/DOORS
• Integrated pressure monitor mount• Pressure ports• Standard duct collar • Adjustable height
• Hinged and sliding options• Handle set included • Adjustable height• Air tight seal
MODEL DETAILS CAT CLASS
S3-HD-42H 42" Hinged Door Module with OTD Kit, Hardware Spares, Handleset, and Closer / 10' - 3" max height 913-6035
S3-SD-42 42" Sliding Door Module with Frame, OTD Kit, Hardware Kit, and Track Support with ICU and Dead Latch 913-6040
SCHLAGE HANDLE MODULAR “OVER THE DOOR “ KIT
THRESHOLD AND SWEEP
MODEL DETAILS CAT CLASS
S1-AC Accessory Cart, with straps and 5" swivel locking casters 913-6000
S1-MC-C8 Mobility Cart, 8 panel capacity, with straps and 8" swivel locking casters 913-6005
S1-RWI Right Side Wall Interface Module, Extendable 913-6010
S1-LWI Left Wall Interface Module, Extendable 913-6015
S1-FC STARC Flexible Corner: 15-90 deg. 12 ft. Max Height 913-6020
S1-FP Filler Panel Kit (set of panel and foam face tracks, includes Right Side Adapter Pole) 913-6025
FLEX CORNER FILLER PANEL
ACCESSORIES
Call 888-777-2700 for rates and reservations64
DRY
ING
+ R
EMED
IATI
ON
CONTAINMENT WALL SYSTEM
SOUND ATTENUATINGSound attenuating
foam core reduces work site noise by up to 50%.
REAL WALL APPEARANCE
Looks great. Projects are contained behind what looks
like a real wall.
FASTINSTALLATION
100' feet of wall can be installed in an hour, saving time and
money between phases.
GREAT
GOOD
POOR
Real Wall Appearance
Improves Sound Attenuation
Durability
Stability
Reduces Environment Waste
Ongoing Savings
STARC WALLS
DRYWALL PLASTICSHEETING
POLYCARBONATEPARTITIONS
BESTSOLUTION