Drums - CurTec · Drums . 1 April 2015 . The following information is intended for all of our...

Last revision: 2 April 2015 of 5

C H A N G E C O N T R O L

Drums 1 April 2015 The following information is intended for all of our valued customers who have purchased or intend to purchase drums. As part of our change control protocol, I would like to inform you about a proposed change to the raw materials and colourants used for drums and lids and the introduction of an alternative EPDM ring and a change to the UN marking on the 110 litre Total opening drum. Change to raw materials From 1 January 2016, the European legislation (EC 10/2011) on plastic materials that are intended for contact with food products will be tightened. CurTec wants all of its packaging products for food applications to meet the amended legislation. However, we found in a recent study that we are unable to do this with our current raw materials and colourants. That is why CurTec has changed the composition of several colourants and has added alternative raw materials and colourants in order to be able to maintain the reliability of our supplies. We have satisfied ourselves that products manufactured from these materials meet all technical and quality requirements. These changes do not apply to the conductive drums. Changes to rings To increase the reliability of our supplies, CurTec has chosen a second supplier for the EPDM rings. CurTec has decided to fit all standard drum lids with an EPDM ring over the long term. We will inform you about this in due course. Changes to UN marking The UN marking on the 110 litre Total opening drum (6994) has been changed. The gross weights for the other packaging groups will now also be stated alongside the gross weight for packaging group I. Changes to product data sheets For your information, I have prepared an extensive summary of the relevant technical data, certificates and other background information that will apply to these changes. The layout and the information on the product data sheets has been changed. The packaging units will no longer be mentioned on the product data sheets, but these remain unchanged. From now on, the raw materials will be described in a Specification of used materials. From now on, the colourants will be described in a Declaration of Compliance for contact with food. Material Track Clock The product data sheets for the 75 and 115 litre nestable drums (7276 & 7294) mention a Material Track Clock. This clock corresponds to a material indication on the actual drum. A Material Track Clock will be added to all product data sheets over time. We will inform you about this when CurTec introduces this.

PACKAGING SCAN


This document contains the following data: Technical comparison EPDM gaskets Modified UN marking Product data sheets Total opening drums Product data sheets Wide neck drums Product data sheets Nestable drums Product data sheets UV safe drums Introducing the Material Track Clock

Acceptance Please read this information carefully. If you require any additional information in order to introduce this change into your quality system, please contact us before 1 May 2015. If you do not reply by this date, CurTec will assume that you have formally accepted these changes. From 1 June 2015, these changes will be incorporated into the production of all drums and lids. From 1 August, all drums and lids will be delivered in accordance with this notification. With kind regards, Eef van Holland Regulatory Affairs & Compliance Officer CurTec International [email protected]

PACKAGING SCAN


Technical comparison EPDM gaskets Company Material Density

(g/cm³) Compression set (VPA2)

Heat resistance Compliant to

A Sponge rubber EPDM

0.6 ≤40 -35°C to +120°C FDA 177.2600 BFR 4th Category…

B Sponge rubber EPDM

0.6 ≤40 -35°C to +120°C FDA 177.2600 French Regulation 'Arrêté du 9 nov… '

Based on the EPDM Product Data sheets of both companies

Ferry Hage Product Developer CurTec International

PACKAGING SCAN


Modified UN marking In order to expand the range of applications for the 110 litre Total opening drum, CurTec has modified the maximum gross weights of the UN marking on the drum. The drum has been tested and certified for specific (higher) gross masses for hazardous goods from packaging groups II and III. Users are no longer limited to the maximum gross mass of the X-marking. The new maximum gross weights are:

Packaging group Marking type Max. gross weight in kg I X 90 II Y 135 III Z 180

The UN marking can be found on the lower side of the drum:

The 110 litre Total opening drum with the new UN insert will be available as of August 1st 2015. Please note that only Total opening drums with the new UN marking are allowed to carry a higher gross mass as described above. Ferry Hage Product Developer CurTec International

Last revision: 25 March 2015 Page 1 of 2

6942

55 litre Total opening drum

For dimensional tolerances see table on next page Product part Product code Description Materials Drum 6942B00-705 55 litre total opening drum HDPE Lid A6970-13-750 Screw lid HDPE Gasket H14 Sealing gasket Rubber Handle A6800 Handle HDPE

Capacity Litres Gallons Brimful 56 14.8 When closed 55 14.5

Weight Grams Ounces Drum 2100 74.08 Lid 650 22.93 Gasket 37 1.31 Handles 90 3.18 Total 2877 101.48

Colours Colour code PMS references Container Brown 705 174 C Lid Beige 750 482 C Handle Black 101 /

PACKAGING SCAN


Hazardous material information Hazardous material type Solids Packaging group I – II – III UN marking UN/1H2/X69/S/--/NL/CURTEC 934 Maximum gross mass (kg) X=69

Product identification

1. Manufacturer ID 2. Country of origin 3. Product no. 4. Food grade 5. Material type 6. Date clock 7. UN mark (on side wall)

Other information Maximum filling temperature is 70°C/ 158°F Contents must have cooled to 30°C/ 86°F before containers can be closed and stacked DoC available on request UN certificate available on request MVTR declaration available on request Other colours available on request User manual available on request

Wall thickness mm Minimal wall thickness ≥1.9 Nominal wall thickness ≥2.3

Dimensional tolerances % Height ±2.5 Diameter ±1.5

Weight tolerance All products have a tolerance of ±4% on the initial weight mentioned on this data sheet

© 2015 Property of CurTec International B.V. All rights explicitly reserved, it is not allowed to copy or communicate to other parties without written consent of CurTec.


6943





Colours Colour code PMS references Container Brown 705 174 C White 004 / Lid Beige 750 482 C Red 402 199 C Handle Black 101 /

PACKAGING SCAN











6944


For dimensional tolerances see table on next page

Product part Product code Description Materials Drum 6944B00-705 75 litre total opening drum HDPE Lid A6970-13-750 Screw lid HDPE Gasket H14 Sealing gasket Rubber Handle A6800 Handle HDPE

Capacity Litres Gallons Brimful 79.5 21 When closed 75 19.8


Colours Colour code PMS references Container Brown 705 174 C White 004 / Lid Beige 750 482 C Black 101 / Red 402 199 C Handle Black 101 /

PACKAGING SCAN











6945


For dimensional tolerances see table on next page Product part Product code Description Materials Drum 6945B00-004 17 litre total opening drum HDPE Lid A6950-13-402 Screw lid HDPE Gasket H14 Sealing gasket Rubber

Capacity Litres Gallons Brimful 17.9 4.7 When closed 17 4.5

Weight Grams Ounces Drum 800 28.22 Lid 374 13.19 Gasket 26 0.92 Total 1200 42.33

Colours Colour code PMS references Container White 004 / Lid Red 402 199 C Blue 680 3015 C

PACKAGING SCAN




1. Manufacturer ID 2. Country of origin 3. Product no. 4. Food grade 5. Material type 6. Date clock 7. UN-mark







6947





Colours Colour code PMS references Container White 004 / Lid Red 402 199 C Handle Black 101 /

PACKAGING SCAN




1. Manufacturer ID 2. Country of origin 3. Product no. 4. Food grade 5. Material type 6. Date clock 7. UN-mark (on side wall)







6948


For dimensional tolerances see table on next page Product part Product code Description Materials Drum 6948B00-004 39 litre total opening drum HDPE Lid A6950-13-402 Screw lid HDPE Gasket H14 Sealing gasket Rubber



Colours Colour code PMS references Container White 004 / Lid Red 402 199 C

PACKAGING SCAN











6950



Capacity Litres Gallons Brimful 34.9 9.2 When closed 34 9



PACKAGING SCAN











6994



Capacity Litres Gallons Brimful 115 30.4 When closed 110 29


Colours Colour code PMS references Container White 004 / Brown 705 174 C Lid Red 402 199 C Beige 750 482 C Handle Black 101 /

PACKAGING SCAN


Hazardous material information Hazardous material type Solids Packaging group I – II – III UN marking UN/1H2/X90/S/--/B/CURTEC-060100 Maximum gross mass (kg) X=90 Y=135 Z=180









7003

3.6 litre Wide neck drum

For dimensional tolerances see table on next page Product part Product code Description Materials Drum 7003B00-004 3.6 litre wide neck drum HDPE Lid A7006-13-402 Screw lid HDPE Gasket H14 Sealing gasket Rubber


Capacity Litres Gallons Brimful 3.6 0.9 When closed 3.6 0.9


PACKAGING SCAN




1. Manufacturer ID 2. Country of origin 3. Product no. 4. Food grade 5. Material type 6. Date clock 7. UN mark







7004

3.6 litre Wide neck drum without ribs

For dimensional tolerances see table on next page Product part Product code Description Materials

Drum 7004B00-004 3.6 litre wide neck drum without ribs

HDPE

Lid A7006-13-402 Screw lid HDPE Gasket H14 Sealing gasket Rubber




PACKAGING SCAN











7006

6 litre Wide neck drum

For dimensional tolerances see table on next page Product part Product code Description Materials Drum 7006B90-004 6 litre wide neck drum HDPE Lid A7006-13-402 Screw lid HDPE Gasket H14 Sealing gasket Rubber




PACKAGING SCAN











7010






PACKAGING SCAN











7011

10 litre Wide neck drum without ribs

For dimensional tolerances see table on next page Product part Product code Description Materials

Drum 7011B00-004 10 litre wide neck drum without ribs

HDPE

Lid A7026-13-402 Screw lid HDPE Gasket H14 Sealing gasket Rubber




PACKAGING SCAN











7015



Product part Product code Description Materials Drum 7015B00-004 15 litre wide neck drum HDPE Lid A7026-13-402 Screw lid HDPE Gasket H14 Sealing gasket Rubber




PACKAGING SCAN











7020






PACKAGING SCAN










Last revision: 2 April 2015 Page 1 of 2

7026



Product part Product code Description Materials Drum 7026B00-004 26 litre wide neck drum HDPE Lid A7026-13-402 Screw lid HDPE Gasket H14 Sealing gasket Rubber




PACKAGING SCAN











7042


For dimensional tolerances see table on next page Product part Product code Description Materials Drum 7042B01-004 42 litre wide neck drum HDPE Lid A7055-13-402 Screw lid HDPE Gasket H14 Sealing gasket Rubber Handle A6800 Handle HDPE




PACKAGING SCAN











7055




Capacity Litres Gallons Brimful 55 14.5 When closed 54.8 14.5


PACKAGING SCAN











7068




Capacity Litres Gallons Brimful 69.9 18.5 When closed 68 18


PACKAGING SCAN











7230

30 litre Nestable drum

For dimensional tolerances see table on next page Product part Product code Description Materials Drum 7230B00-004 30 litre nestable drum HDPE Lid A7140-13-605 Screw lid HDPE Gasket H14 Sealing gasket Rubber Handle A6800 Handle HDPE

Colours Colour code PMS references Container White 004 / Lid Blue 605 301 C Handle Black 101 /



Last revision 25 March 2015 Page 2 of 2

Hazardous material information Hazardous material type Solids Packaging group I – II – III UN marking 1H2/X40/Y40/Z40/S/--/NL/CurTec 3198 Maximum gross mass (kg) X=40 Y=40 Z=40






Weight tolerance All products have a tolerance of ±4% of the initial weight mentioned on this data sheet



7240



Colours Colour code PMS references Container White 004 / Lid Blue 605 301 C White 004 / Handle Black 101 /




7250






PACKAGING SCAN











7260




Capacity Litres Gallons Brimful 62.5 16.5 When closed 60.5 16


PACKAGING SCAN











7276






PACKAGING SCAN




1. Manufacturer ID 2. Country of origin 3. Product no. 4. Food grade 5. Date clock 6. Material type 7. Material track clock 8. UN mark (on side wall)







7294



Product part Product code Description Materials Drum 7294B00-004 114 litre nestable drum HDPE Lid A6990-23-605 Screw lid HDPE Gasket H14 Sealing gasket Rubber Handle A6800 Handle HDPE

Capacity Litres US gallons Drum 118 31.2 Lid 114 30.1



PACKAGING SCAN




1. Manufacturer ID 2. Country of origin 3. Product no. 4. Food grade 5. Date clock 6. Material type 7. Material track clock 8. UN mark (on side wall)







6942

55 litre UV safe drum

For dimensional tolerances see table on next page Product part Product code Description Material Drum 6942B00-101 55 litre total opening drum HDPE Lid A6970-13-101 Screw lid HDPE Gasket H14 Sealing gasket Rubber Handle A6800 Handle HDPE



Colours Colour code PMS references Container Black 101 / Lid Black 101 / Handle Black 101 /

PACKAGING SCAN





Other information All UV safe drums offer complete protection against UV-light within the 200-400 nm range Maximum filling temperature is 70°C/ 158°F Contents must have cooled to 30°C/ 86°F before containers can be closed and stacked DoC available on request UN certificate available on request MVTR declaration available on request User manual available on request






7006


For dimensional tolerances see table on next page Product part Product code Description Material Drum 7006B90-101 6 litre wide neck drum HDPE Lid A7006-13-101 Screw lid HDPE Gasket H14 Sealing gasket Rubber



Colours Colour code PMS references Container Black 101 / Lid Black 101 /

Hazardous material information

PACKAGING SCAN


Hazardous material type Solids Packaging group I – II – III UN marking UN/1H2/X20/S/--/NL/CURTEC 1352 Maximum gross mass (kg) X=20









7015






PACKAGING SCAN











7026






PACKAGING SCAN










PACKAGING SCAN


Introducing the Material Track Clock In 2015, CurTec introduces the Material Track Clock (MTC). The MTC is an adjustable clock that is used to indicate the raw matrial. The new 75 and 115 litre Nestable drums are the first to feature the MTC on the bottom of the drum. The MTC contains letters (A-K) which refer to raw material suppliers and brands. The letter and corresponding raw materials supplier and brand are mentioned in separate Declarations of Compliance (DoC). DoCs are available on request via Inside Sales ([email protected]).

In future, all CurTec drums, containers and lids will bear a MTC. Customers will receive a notification when these clocks become visible on the product. Ferry Hage Product Developer CurTec International

mailto:[email protected]

Drums - CurTec · Drums . 1 April 2015 . The following information is intended for all of our...

Documents

Transcript of Drums - CurTec · Drums . 1 April 2015 . The following information is intended for all of our...