Drum coating technology - Glatt · First for clinical sample production. ... RPMs 1/min 2 - 22...
4
Drum coating technology GC 2 FILM COATING GC 2
Transcript of Drum coating technology - Glatt · First for clinical sample production. ... RPMs 1/min 2 - 22...
Drum coating technology
GC 2
FILM COATING
GC 2
T h e v e r y b e s t fo r y o u r l a b o r a to r y
The innovative GC 2 from Glatt
Total flexibility Top-quality coating. For new ideas and the best
products.
• Filmcoatingintherangefrom
approx. 1 kg to approx. 10 kg.
• 4interchangeabledrumsizeswith
working volumes of 2.5 l, 5 l, 9 l and 12 l.
• 1or2ABCnozzles.
• Foraqueousandorganicprocesses.
The highest of requirements apply in the manu-
factureofclinical samples.Choose the trouble-
freesolution:GC2.
• Easy-to-cleandesign.
• Comprehensiveprocessdocumentation.
• Qualificationpackageoptional.
• Validationofprocesses.
• OptionalHEPA-filteredairinlet.
• AllrelevantmaterialsFDAcompliant.
First for clinical sample production
Fo r m a n d f u n c t i o n t a k e n to p e r fe c t i o n
GC 2.Glatt quality.In every detail.
Optimum process control
Raise your expectations with ProcessView!
Fast and simple process control providing a con-
vincing solution.
• Touch-screencontrol.
• Rotatingoperatingpanel.
• Perfectergonomicsfortheoperator.
• Integratedrecipemanagement.
Outstanding handling and integrated technology.
Perfectsolutionsandsophisticateddesign.The
GC2offersalltheadvantagesofintegratedtech-
nology and top-quality finish.
• 4exchangeabledrumswithcentralfixing,
very easy to replace.
• Largefrontdoor,easy-to-cleanprocess
areas.
• Ergonomicallyarrangedconnections.
Perfectintegration.
• Uniqueworksurfacemadeofsynthetic
granite. Resistant to solvents, scratch-
proofandimpact-proof.Itstilllooks
like new even after years of use.
• Innovativenozzlearm,removable
androtatable.Nozzlepositioneasily
adjustable.
Modular design
Benefitfrommaximumflexibility.Theintegrated
extra modules mean that all options are available
to you, either now or later. You are well prepared
for the future.
• Dehumidificationofinletair.
• Largeexhaustfilterfordust-intensive
coating processes.
• Additionalstoragespaceforprocess
accessories.
Plug & Play
Justconnectitupandyou’reoff!
Some performance features named in the brochure are optional.
7
1000
1950
2650 1000780 600 1030
Technicaldata/Addresses
Exchangeable drums Working volume* Litres 2.5 5 9 12
RPMs 1/min 2 - 22
Motor rating kW 0.25
Ventilators Air volume Nm3/h 50 - 300
Motor rating kW 3
Air heater Max. inlet air temp. °C 80
Max. electr. heating capacity kW 7
Spray system Spray system Binary nozzles
Number 1 1 2 2
Pump motor kW 0.06
Air filter Inlet 1 acc. to EN 779 F 7
Inlet 2 acc. to EN 779 F 9
Inlet 2 (optional) acc. to DIN EN 1822 H 13
Outlet air acc. to EN 779 F 9
Exhaust (optional) acc. to DIN EN 1822 H 13
Power Operating voltage V 400
Frequency Hz 50 / 60
Total connected load kW 12
Max. compressed air consumption Nm3/h 30
Max. compressed air consumption 6 bar
Connector 5-pole CEE form
Dimensions Height mm 1950
Width mm 2650
Depth mm 1030
Weight GC 2 kg a pprox. 1000
GC 2
Glatt GmbH Process Technology Werner-Glatt-Straße 179589 Binzen / GermanyPhone: +49 7621 6640Fax: +49 7621 64723e-mail: [email protected]
Glatt Maschinen- & Apparate bau AG Kraftwerkstrasse 64133 Pratteln / SwitzerlandPhone: +41 61 8264747Fax: +41 61 8264848e-mail: [email protected]
www.glatt.com
©GLA
TT G
MBH
BIN
ZEN
– GC
2 –
M
ARCH
201
4 –
EN
*Max. working volume, min. working volume 50% (Subject to technical alterations)
