Driven & Static t ooling | Mori Seiki - Flood Supply · Driven & Static Driven toolS ... T03005...

Driven & Static tooling | Mori Seiki

3

Mori SeikiMori Seiki

www.parlec.com | 1-800-866-5872 |

Driven & Static

Mori Seiki toolingNL1500, NL2000, NL2500, NL3000, NT 4200, NT4250, NT4300 Driven Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

NL1500, NL2000, NL2500, NL3000, NT 4200, NT4250, NT4300 Static Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

NL1500, NL2000, NL2500, NL3000, NT 4200, NT4250, NT4300 Capto Static Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

NL1500, NL2000, NL2500, NL3000, NT 4200, NT4250, NT4300 Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

tooling rebuilD Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Table of Contents

| 1-800-866-5872 | www.parlec.com

Driven & Static

All tools are not created equal!Innovative engineering is a cornerstone in the development of Parlec Driven & Static Tooling. Parlec tools are engineered to run at higher speeds and last longer than our competition – Just what you would expect from the worldwide leader in tooling, workholding, and presetting solutions.

Dedication To TechnologyToday Parlec is incorporating Supermill® technology into every tool we manufacture. Supermill technology is producing tools that provide superior surface finishes, increased rigidity, increased speed and feed rates, longer cutter lengths, and longer tool life over conventional tools.

Bearing TechnologyParlec uses only the highest grade of bearings in every tool to ensure the longest possible bearing life and maximum rigidity on the input and output spindles of a tool.

Seal TechnologyBy incorporating the latest advances in seal technology we have produced tools that can run at higher speeds and last longer than our competition.

Worldwide Commitment Parlec offers factory support around the world and hasover 500 locations globally offering sales, distribution, and product support.

5


www.parlec.com | 1-800-866-5872 |

Driven & Static

Driven toolSPart number Description oeM ref # output Spindle ratio Max. torque Speed Max coolant type Drawing index #T32206 STR TOOL ER32- EXT COOL 6000RPM T32206 ER32 1:1 84 Nm 6000 External 1T32206-TC STR TOOL ER32 - THRU COOL 6000RPM - ER32 1:1 84 Nm 6000 Internal 1T32213 STR TOOL ER40 - EXT COOL 6000RPM T32206 ER40 1:1 84 Nm 6000 External 2T32213-TC STR TOOL ER40 - THRU COOL 6000RPM - ER40 1:1 84 Nm 6000 Internal 2T32207 90-DEG TOOL ER32 - EXT COOL 6000RPM T32207 ER32 1:1 84 Nm 6000 External 3T32207-TC 90-DEG TOOL ER32- THRU COOL 6000RPM - ER32 1:1 84 Nm 6000 Internal 3T32214 90-DEG TOOL ER40 - EXT COOL 6000 RPM - ER40 1:1 84 Nm 6000 External 4T32214-TC 90-DEG TOOL ER40- THRU COOL 6000RPM - ER40 1:1 84 Nm 6000 Internal 4T32216 DBL END ER32 - EXT COOL 6000RPM T32216 ER32 1:1 84 Nm 6000 External 5T32217-22MM STR SHELL MILL 22MM EXT COOLANT 6000RPM - 22MM SHELL MILL 1:1 84 Nm 6000 External 6T32217-27MM STR SHELL MILL 27MM EXT COOLANT 6000RPM - 27MM SHELL MILL 1:1 84 Nm 6000 External 6T32217-1.00 STR SHELL MILL 1" EXT COOLANT 6000RPM - 1" SHELL MILL 1:1 84 Nm 6000 External 6T32217-0.75 SHELL MILL 3/4" EXT COOLANT 6000RPM - 3/4" SHELL MILL 1:1 84 Nm 6000 External 6T32226-22MM 90-DEG SHELL MILL 22MM EXT CLNT 6000RPM - 22MM SHELL MILL 1:1 84 Nm 6000 External 7

NL1500, NL2000, NL2500, NL3000 NT4200, NT4250, NT4300

INdex NuMber: 1 T32206




Mori Seiki Driven & Static

6

Mori

Seik

i

| 1-800-866-5872 | www.parlec.com

QTN NexuS 300, NexuS 350, NexuS 400, NexuS 450 SerIeS SQT 28, SQT 30, SQT 300

SocketSPart number Description53208001000 U' DRILL SOCKET 40MM X 20MM53208001100 U' DRILL SOCKET 40MM X 25MM53208001200 U' DRILL SOCKET 40MM X 32MM53428000200 BORING BAR SOCKET 50MM X 40MM53428000400 BORING BAR SOCKET 50MM X 32MM53428000500 BORING BAR SOCKET 50MM X 25MM53428001500 DRILL SOCKET 50MM X 4MT53428001600 DRILL SOCKET 50MM X 3MT53428001700 DRILL SOCKET 50MM X 2MT53428001900 BORING BAR SOCKET 2" X 1-3/4"53428002000 BORING BAR SOCKET 2" X 1-1/2"53428002100 BORING BAR SOCKET 2" X 1-1/4"53428002200 BORING BAR SOCKET 2" X 1"53428003100 DRILL SOCKET 2" X 4MT53428003200 DRILL SOCKET 2" X 3MT53428003300 DRILL SOCKET 2" X 2MT

7


www.parlec.com | 1-800-866-5872 |

Driven & Static

Driven toolSPart number Description oeM ref # output Spindle ratio Max. torque Speed Max coolant type Drawing index #T32206 STR TOOL ER32- EXT COOL 6000RPM T32206 ER32 1:1 84 Nm 6000 External 1T32206-TC STR TOOL ER32 - THRU COOL 6000RPM - ER32 1:1 84 Nm 6000 Internal 1T32213 STR TOOL ER40 - EXT COOL 6000RPM T32206 ER40 1:1 84 Nm 6000 External 2T32213-TC STR TOOL ER40 - THRU COOL 6000RPM - ER40 1:1 84 Nm 6000 Internal 2T32207 90-DEG TOOL ER32 - EXT COOL 6000RPM T32207 ER32 1:1 84 Nm 6000 External 3T32207-TC 90-DEG TOOL ER32- THRU COOL 6000RPM - ER32 1:1 84 Nm 6000 Internal 3T32214 90-DEG TOOL ER40 - EXT COOL 6000 RPM - ER40 1:1 84 Nm 6000 External 4T32214-TC 90-DEG TOOL ER40- THRU COOL 6000RPM - ER40 1:1 84 Nm 6000 Internal 4T32216 DBL END ER32 - EXT COOL 6000RPM T32216 ER32 1:1 84 Nm 6000 External 5T32217-22MM STR SHELL MILL 22MM EXT COOLANT 6000RPM - 22MM SHELL MILL 1:1 84 Nm 6000 External 6T32217-27MM STR SHELL MILL 27MM EXT COOLANT 6000RPM - 27MM SHELL MILL 1:1 84 Nm 6000 External 6T32217-1.00 STR SHELL MILL 1" EXT COOLANT 6000RPM - 1" SHELL MILL 1:1 84 Nm 6000 External 6T32217-0.75 SHELL MILL 3/4" EXT COOLANT 6000RPM - 3/4" SHELL MILL 1:1 84 Nm 6000 External 6T32226-22MM 90-DEG SHELL MILL 22MM EXT CLNT 6000RPM - 22MM SHELL MILL 1:1 84 Nm 6000 External 7

NL1500, NL2000, NL2500, NL3000 NT4200, NT4250, NT4300






8

Mori

Seik

i

| 1-800-866-5872 | www.parlec.com



INdex NuMber: 7 T32226-22MM

9


www.parlec.com | 1-800-866-5872 |

Driven & Static

NL1500, NL2000, NL2500, NL3000 NT4200, NT4250, NT4300Static toolSPart number Description Drawing index #T00184 OD CUTTING HOLDER-F/R-25MM 8T00185 OD CUTTING HOLDER-F/R-20MM 9T00186 OD CUTTING HOLDER -FORWARD-25MM 10T00187 OD CUTTING HOLDER-FORWARD-20MM 11T00199 OD CUTTING HOLDER-FORWARD/REVERSE-1" 12T00201 OD CUTTING HOLDER-FORWARD/REVERSE-3/4" 13T00202 OD CUTTING HOLDER-FORWARD-1" 14T00203 OD CUTTING HOLDER-FORWARD- 3/4" 15T10097 BORING BAR HOLDER-40MM (NL ONLY) 16T10098 BORING BAR HOLDER - 50MM (NL ONLY) 17T10101 BORING BAR HOLDER - 1-1/2" (NL ONLY) 18T10102 BORING BAR HOLDER - 2" (NL ONLY) 19T10113 BORING BAR HOLDER - 40MM (NT ONLY) 20T10114 BORING BAR HOLDER - 50MM (NT ONLY) 21T10134 BORING BAR HOLDER 1-1/2" (NT ONLY) 22T10135 BORING BAR HOLDER - 2" (NT ONLY) 23T10096 DOUBLE BORING BAR HOLDER - 32MM 24T10100 DOUBLE BORING BAR HOLDER - 1-1/4" 25T10104 TRIPLE BORING BAR HOLDER -25MM 26T10108 TRIPLE BORING BAR HOLDER -1" 27T00197 CUT-OFF HOLDER - 25MM 28T00198 CUT-OFF HOLDER - 1" 29T03005 FACE & I/D CUTTING HOLDER-25MM 30T03006 FACE & I/D CUTTING HOLDER-20MM 31T03013 FACE & I/D CUTTING HOLDER-1" 32T03014 FACE & I/D CUTTING HOLDER-3/4" 33T13128 U DRILL HOLDER- 40MM (NL ONLY) 34T13130 U DRILL HOLDER- 1-1/2" (NL ONLY) 35T13131 U DRILL HOLDER- 40MM (NT ONLY) 36T13137 U DRILL HOLDER-1-1/2" (NT ONLY) 37T17002 CENTER DRILL HOLDER - METRIC 38T17003 CENTER DRILL HOLDER -IMPERIAL 39T17004 CENTER DRILL HOLDER - METRIC 40T17005 CENTER DRILL HOLDER -IMPERIAL 41


10

Mori

Seik

i

| 1-800-866-5872 | www.parlec.com







11


www.parlec.com | 1-800-866-5872 |

Driven & Static








12

Mori

Seik

i

| 1-800-866-5872 | www.parlec.com







1-1/2”

13


www.parlec.com | 1-800-866-5872 |

Driven & Static








14

Mori

Seik

i

| 1-800-866-5872 | www.parlec.com







15


www.parlec.com | 1-800-866-5872 |

Driven & Static






16

Mori

Seik

i

| 1-800-866-5872 | www.parlec.com

nl SerieS caPto Static toolSPart number Description Drawing index #C4-LCe-NL2000-0680405A MORI NL-C4 OD TURN LH-FRONT SPINDLE MAX 42C4-rCe-NL2000-0680405A MORI NL-C4 OD TURN RH-FRONT SPINDLE MAX 42C5-LCe-NL3000-086053A MORI NL-C5 OD TURN LH - FRONT SPINDLE 43C5-rCe-NL3000-086053A MORI NL-C5 OD TURN RH - FRONT SPINDLE 43C4-LCe-NL2000-061089A MORI NL-C4 OD TURN LH - F/R SPINDLE 44C4-rCe-NL2000-061089A MORI NL-C4 OD TURN RH - F/R SPINDLE 44C5-LCe-NL3000-076098A MORI NL-C5 OD TURN LH - F/R SPINDLE 45C5-rCe-NL3000-076098A MORI NL-C5 OD TURN RH - F/R SPINDLE 45C4-LCI-NL2000-080075A MORI NL-C4 ID HOLDER LH - F/R SPINDLE 46C4-rCI-NL2000-080075A MORI NL-C4 ID HOLDER RH - F/R SPINDLE 46C5-LCI-NL3000-080075A MORI NL-C5 ID HOLDER LH-F/R SPINDLE 47C5-rCI-NL3000-080075A MORI NL-C5 ID HOLDER RH - F/R SPINDLE 47C5-LCI-NL3000-080037A MORI NL-C5 SET BACK LH I .D . HOLDER 48C5-rCI-NL3000-080037A MORI NL-C5 SET BACK RH I .D . HOLDER 48C4-LCe-NL2000-061089AdT MORI NL-C4 DLB OD TURN LH - F/R SPINDLE 49C4-rCe-NL2000-061089AdT MORI NL-C4 DLB OD TURN RH - F/R SPINDLE 49C4-LCI-NL2000-125075AdT MORI NL-C4 DBL ID HOLDER LH-F/R SPINDLE 50C4-rCI-NL2000-125075AdT MORI NL-C4 DBL ID HOLDER RH-F/R SPINDLE 50

NL1500, NL2000, NL2500, NL3000 NT4200, NT4250, NT4300

nt SerieS caPto Static toolSPart number Description Drawing index #C4-LCe-NL2000-0680405A MORI NL-C4 OD TURN LH-FRONT SPINDLE MAX 42C4-rCe-NL2000-0680405A MORI NL-C4 OD TURN RH-FRONT SPINDLE MAX 42C5-LCe-NL3000-086053A MORI NL-C5 OD TURN LH - FRONT SPINDLE 43C5-rCe-NL3000-086053A MORI NL-C5 OD TURN RH - FRONT SPINDLE 43C4-LCe-NL2000-061089A MORI NL-C4 OD TURN LH - F/R SPINDLE 44C4-rCe-NL2000-061089A MORI NL-C4 OD TURN RH - F/R SPINDLE 44C5-LCe-NL3000-076098A MORI NL-C5 OD TURN LH - F/R SPINDLE 45C5-rCe-NL3000-076098A MORI NL-C5 OD TURN RH - F/R SPINDLE 45C4-LCI-NT4200-120075A MORI NL-C4 ID HOLDER LH F/R SPINDLE 51C4-rCI-NT4200-120075A MORI NL-C4 ID HOLDER RH-F/R SPINDLE 51C5-LCI-NT4200-120075A MORI NL-C5 ID HOLDER LH- F/R SPINDLE 52C5-rCI-NT4200-120075A MORI NL-C5 ID HOLDER RH- F/R SPINDLE 52C5-LCI-NT4200-120037A MORI NL-C5 SET BACK ID HLDR LH-F/R SPIN 53C5-rCI-NT4200-120037A MORI NL-C5 SET BACK ID HLDR RH-F/R SPIN 53C4-LCe-NL2000-061089AdT MORI NL-C4 DLB OD TURN LH - F/R SPINDLE 49C4-rCe-NL2000-061089AdT MORI NL-C4 DLB OD TURN RH - F/R SPINDLE 49C4-LCI-NT4200-120075AdT MORI NL-C4 DBL ID HOLDER LH-F/R SPINDLE 54C4-rCI-NT4200-120075AdT MORI NL-C4 DBL ID HOLDER RH-F/R SPINDLE 54

17


www.parlec.com | 1-800-866-5872 |

Driven & Static

INdex NuMber: 46 C4-L/RCI-NL2000-080075A


INdex NuMber: 42 C4-L/RCE-NL2000-0680405A





18

Mori

Seik

i

| 1-800-866-5872 | www.parlec.com

INdex NuMber: 51 C5-L/RCI-NT4200-120075A




INdex NuMber: 50 C4-L/RCE-NL2000-125075ADT

INdex NuMber: 49 C4-L/RCE-NL2000-061089ADT

19


www.parlec.com | 1-800-866-5872 |

Driven & Static

NL1500, NL2000, NL2500, NL3000 NT4200, NT4250, NT4300SocketSPart number DescriptionT20098 BORING BAR SLEEVE 40MM - 32MMT20096 BORING BAR SLEEVE 40MM - 25MMT20094 BORING BAR SLEEVE 40MM - 20MMT20092 BORING BAR SLEEVE 40MM - 16MMT20090 BORING BAR SLEEVE 40MM - 12MMT20088 BORING BAR SLEEVE 40MM - 10MMT20086 BORING BAR SLEEVE 40MM - 8MMT20099 BORING BAR SLEEVE 1-1/2" - 1-1/4"T20097 BORING BAR SLEEVE 1-1/2" - 1"T20095 BORING BAR SLEEVE 1-1/2" - 3/4"T20093 BORING BAR SLEEVE 1-1/2" - 5/8"T20091 BORING BAR SLEEVE 1-1/2" - 1/2"T20089 BORING BAR SLEEVE 1-1/2" - 3/8"T20196 BORING BAR SLEEVE 40MM - 20MMT20194 BORING BAR SLEEVE 40MM - 16MMT20110 BORING BAR SLEEVE 40MM - 12MMT20108 BORING BAR SLEEVE 40MM - 10MMT20106 BORING BAR SLEEVE 40MM - 8MMT20197 BORING BAR SLEEVE 1-1/2" - 3/4" (COOLANT THRU)T20195 BORING BAR SLEEVE 1-1/2" - 5/8" (COOLANT THRU)T20111 BORING BAR SLEEVE 1-1/2" - 1-1/4" (COOLANT THRU)T20109 BORING BAR SLEEVE 1-1/2" - 3/8" (COOLANT THRU)T20122 BORING BAR SLEEVE 32MM - 25MMT20120 BORING BAR SLEEVE 32MM - 20MMT20118 BORING BAR SLEEVE 32MM - 16MMT20116 BORING BAR SLEEVE 32MM - 12MM

T20114 BORING BAR SLEEVE 32MM - 10MMT20112 BORING BAR SLEEVE 32MM - 8MMT20123 BORING BAR SLEEVE 1-1/4" - 1"T20121 BORING BAR SLEEVE 1-1/4" - 3/4"T20119 BORING BAR SLEEVE 1-1/4" - 5/8"T20117 BORING BAR SLEEVE 1-1/4" - 1/2"T20115 BORING BAR SLEEVE 1-1/4" - 3/8"T22042 DRILL SOCKET 40MM - MT3T22044 DRILL SOCKET 40MM - MT4T22046 DRILL SOCKET 40MM - MT2T22066 DRILL SOCKET 40MM - MT1T22043 DRILL SOCKET 1-1/2" - MT3T22045 DRILL SOCKET 1-1/2" - MT4T22047 DRILL SOCKET 1-1/2" - MT2T22067 DRILL SOCKET 1-1/2" - MT1T22048 DRILL SOCKET 32MM - MT2T22050 DRILL SOCKET 32MM - MT1T22049 DRILL SOCKET 1-1/4" - MT2T22051 DRILL SOCKET 1-1/4" - MT1T20100 THROW-AWAY DRILL SOCKET 40MM - 32MMT20102 THROW-AWAY DRILL SOCKET 40MM - 25MMT20104 THROW-AWAY DRILL SOCKET 40MM - 20MMT20190 THROW-AWAY DRILL SOCKET 40MM - 16MMT20101 THROW-AWAY DRILL SOCKET 1-1/2" - 1-1/4"T20103 THROW-AWAY DRILL SOCKET 1-1/2" - 1"T20105 THROW-AWAY DRILL SOCKET 1-1/2" - 3/4"

INdex NuMber: 54 C4-L/RCI-NT4200-120075ADT

Driven & Static

20

Mori

Seik

i

| 1-800-866-5872 | www.parlec.com

Tool Rebuild Service

TIred of wAITINg weekS ANd MoNThS To hAve your TooLS ShIpped To The fACTory? We offer rebuild services in North America and Europe . Evaluations are complete within 3–5 days of receipt of the tool and a standard repair is complete within 10 days of customer approval . Emergency tool repairs are also available for customers who have machines down due to broken tools .

CAN I repAIr The TooLS MySeLf or purChASe CoMpoNeNTS for pArLeC TooLS?

■ We are willing to supply components on all Parlec tools but do not recommend that you try the repair yourself . There is a lot more to a repair than just changing a component .

■ Our assembly team is trained in:

– Tool Design and Failure Modes – Bearing Failure Analysis – Seal Technology & Wear Analysis – Gear Failure Analysis – Tool Assembly, Preloads, Tool Break In and Tool Inspection

■ This allows us to identify the root cause of the failure so that it does not cause premature tool failure in the future .

eCoNoMICAL – rebuILdS Economical – rebuilds typically cost 50% or less than the cost of a new tool and come with Parlec’s standard 6-month warranty on components we repair or replace .

pArLeC offerS rebuILd ServICeS oN ALL MAkeS ANd ModeLS of drIveN ANd STATIC TooLS.How can Parlec rebuild competitor’s tools? The majority of tools that we repair have worn seals and bearings as the root cause of problem . This means that we have access to the same components that were supplied with the original tool . Should there be a failure in an OEM proprietary component that we do not have access to then we would recommend that you send the tool back to the manufacturer .

whAT To do? ■ Send us your tool marked “Repair Evaluation”, to:

parlec Inc. 101 Perinton Parkway Fairport, NY 14450, USA

■ Be sure to include your company name and contact information and the make and model of the machine that the tool is used on inside the box .

6 MoNTh wArrANTy oN every TooL ■ All tools are calibrated in accordance with Parlec’s ISO 9001:2000 Quality System ■ Free estimate on every tool ■ Repairs available on all makes & models of tool ■ Over 20 years of experience in repairing driven and static tools ■ Annual maintenance contracts available

© 2011 Parlec, Inc. All rights reserved.Made in U .S .A .

BY ANY MEASURE

Measurably Better

americasTel: 585-425-4400Fax: 585-425-7542

Headquarters101 Perinton ParkwayFairport, NY 14450 USA

asia PacificTel: 86-25-6661-2228Fax: 86-25-6661-2278

europeTel: 01-585-425-4400Fax: 01-585-425-7542

For a quotation, please contact 1-800-TOOL-USA (1-800-866-5872) or visit www.parlec.com.

Driven & Static t ooling | Mori Seiki - Flood Supply · Driven & Static Driven toolS ... T03005...

Documents

Transcript of Driven & Static t ooling | Mori Seiki - Flood Supply · Driven & Static Driven toolS ... T03005...