DRIVEN and STATIC TOOLING MAZAK · Live Tooling M. T. Marchetti, a major live tool manufacturer in...

DRIVEN and STATIC TOOLING

For

MAZAK

10139 BERGIN RD. HOWELL, MI 48843 PHONE : 877-91-TOOLS ( 810-632-4446 ) FAX: 877-92-TOOLS ( 810-632-4467 ) EMAIL: [email protected] WEBSITE: www.mdtooling.com

Live Tooling

M. T. Marchetti, a major live tool manufacturer in northern Italy, is a leader in live tool technology. The formula is simple. Use only the best angular contact high-speed bearings available. Add to this an exacting tolerances for all ground shafts, gears and bearing pocket features. Next, develop a sealed system that will not allow any contamination from chips or coolant.

Top this all off with a superior design and you end up with a live tool that is more rigid, faster and will last longer. We back this up with a 2-Year factory warranty.

Our Live Tool Warranty Our tooling will give years of service in the most demanding applications. The superior design and rugged construction has proven this over the last 12 years. The reliability of our tools allows us to provide a 2-year factory warranty, for non-wear components.

MD Tooling will repair any defective tool holders for a period of 2 years from the date of purchase.

Product Range We have the largest range of live tooling available for most major machine tool manufactures. Our available products include an extensive line of standard live tooling as well as specialty tool holders such as 0-180 adjustable angle tool holders, gear hobbers, and even worm gear generators. Our product range includes geared up holders to 60,000 RPM and are engineered for 1,000 PSI coolant through.

We are an industry leader in providing complete tooling solutions with hundreds of static tool options as well.

Technical Support Here at MD Tooling we have a full technical support department with over 35 years of CNC experience.

Our highly qualified staff can help with part processing, tooling up a job from a blue print and even assist with part programming. Applications Engineers are always available by phone to answer any questions you may have about our tooling or any other CNC related issue.

Stock and Replenishment MD Tooling maintains an extensive inventory of tooling in our warehouse in Michigan. Our current “fill” rate on orders is 93% from our stock in Michigan for same day shipping.

Should you require a non-stock item, our manufacturer, M.T. Marchetti also maintains a large inventory in Italy. Tooling can be obtained in as little as 3-5 business days.

Shipping MD Tooling realizes that when you need tooling, often you can’t wait until the next day. We process orders and ship from available stock right up until 4PM EST to make certain we get your tooling solutions to you as quickly as possible.

We regularly ship throughout the day via UPS, FedEx or any other carrier that a customer requests.

10139 Bergin Road Howell, MI 48843 Phone: (810) 632-4446 Fax: (810) 632-4467 Email: [email protected] Web: www.mdtooling.com

Fast, Friendly, Reliable Service!

Quality tooling at highly competitive pricing.

2-Year Warranty on all live tools.

Extensive inventory. We currently ship over 93% of all orders same day.

In-house repair services available.

If a warranty tool needs to be returned for inspection, service or repair, loaner tools are available to keep your machine tool production up and running.

More specialty tool holders than any other manufacturer.

Custom tool holders available.

All available tooling may not be shown in this catalog. If you can’t find the holder you’re looking for, please contact our office for assistance.

12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12STATION - SUPER QUADREX 200-250M -IVS200/300M

SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY

1DRIVEN 1

RADIAL DRIVEN TOOL 1RADIAL MTSK DRIVEN TOOL 1RADIAL RE-DIRECTED DRIVEN TOOL 50mm 2GEARED DOWN RADIAL REDIRECTED TOOL IN Z BY 50mm 2GEARED UP RADIAL REDIRECTED TOOL IN Z BY 50mm 3RADIAL REINFORCED REDIRECTED IN Z BY 50mm 3RADIAL REINFORCED GEARED-DOWN REDIRECTED IN Z BY 50mm 4RADIAL GEARED-UP REINFORCED REDIRECTED IN Z BY 50mm 4RADIAL ±25° ADJUSTABLE ANGLE DRIVEN TOOL RE-DIRECTED BY 50mm 4



5DRIVEN 5

AXIAL DRIVEN TOOL H=80mm 5AXIAL DRIVEN TOOL H=130mm 5AXIAL MTSK DRIVEN TOOL 6AXIAL GEARED-UP DRIVEN TOOL 6AXIAL OPPOSITE FACE REAR-SET DRIVEN TOOL 7AXIAL GEARED-UP OPPOSITE FACE TWIN DRIVEN TOOL 7



8DRIVEN 8

(0-180) ADJUSTABLE ANGLE DRIVEN TOOL 8(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY 8(0-180) ADJUSTABLE ANGEL DRIVEN TOOL 9(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY 9(0-180) GEARED UP ADJUSTABLE ANGLE DRIVEN TOOL 10

DIGITAL DISPLAY(0-180) ADJUSTABLE ANGLE DRIVEN TOOL GEARED-UP 1:2 WITH

10DRIVEN 11

BROACHING/SLOTTING TOOL 25mm H=130mm 11BROACHING/SLOTTING TOOL 50mm H=130mm 11

SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS200-250M/MS/MY/MSY 12 STATION - QT NEXUS200II-250II M/MS/MY/MSY 12 STATION - SUPERQUADREX 200-250M

SQT 15-18M/MS/MY/MSY 12 STATION

12STATIC 12

RADIAL SINGLE TOOL STATIC HOLDER 12RADIAL SINGLE TOOL DOUBLE SIDED STATIC HOLDER 12RADIAL DOUBLE BLADE HOLDER WITH BLADE KIT 12

STATIC 13INCLUDED)

RADIAL DOUBLE BLADE HOLDER INTERNAL COOLANT (BLADEKIT NOT13

AXIAL SINGLE TOOL STATIC HOLDER 13AXIAL SINGLE BORING BAR HOLDER H=130mm 13

SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS200-250M/MS/MY/MSY 12 STATION - QT NEXUS200II-250II M/MS/MY/MSY 12 STATION - SUPERQUADREX 200-250M

SQT 15-18M/MS/MY/MSY 12 STATION

14AXIAL SINGLE BORING BAR HOLDER H=140mm 14AXIAL 3+3 POSITION BORING BAR HOLDER 14

200-250M/MS/MY/MSY 16 STATION - QT NEXUS200II-250IIM/MS/MY/MSY 16 STATION - QT NEXUS100-150M/MS 12 STATION - QT NEXUS 100IIM/MS -SQT100M/MS/MY/MSY - SQT10M/MS 12 STATION -SQT200-250M/MS/MY/MSY 16 STATION

SQT 15-18M/MS/MY/MSY 16 STATION - QT NEXUS

15DRIVEN 15

(0-180) ADJUSTABLE ANGLE DRIVEN TOOL 15(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY 15

DRIVEN 16(0-180) GEARED UP ADJUSTABLE ANGLE DRIVEN TOOL ERA16 16(0-180) ADJUSTABLE ANGLE GEARED-UP 1:2 WITH DIGITAL DISPLAY 16DRIVEN GEAR HOBBER 17

200-250M/MS/MY/MSY 16 STATION - QT NEXUS200II-250IIM/MS/MY/MSY 16 STATION - QT NEXUS100-150M/MS 12 STATION - SQT100M/MS/MY/MSY -SQT10M/MS 12 STATION -SQT200-250M/MS/MY/MSY 16 STATION


18STATIC 18

AXIAL SINGLE BORING BAR HOLDER H=130mm 18

QUADREX 200-250MSY 12 STATION MULTIPLEX8200 (TURRET SUP. 12 STATION) / MULTIPLEXW-200 12 STATION

MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER

19DRIVEN 19

RADIAL REDIRECTED DRIVEN TOOL 19RADIAL GEARED UP REDIRECTED DRIVEN TOOL 19RADIAL GEARED DOWN REDIRECTED DRIVEN TOOL 20RADIAL REINFORCED REDIRECTED IN Z BY 50mm 20RADIAL REINFORCED GEARED-DOWN REDIRECTED IN Z BY 50mm 21RADIAL GEARED UP REDIRECTED DRIVEN TOOL IN Z BY 50mm 21AXIAL DRIVEN TOOL H=130mm 22AXIAL MTSK DRIVEN TOOL 22AXIAL GEARED-DOWN DRIVEN TOOL 23AXIAL GEARED-UP 1:3 DRIVEN TOOL 23(0-180) ADJUSTABLE ANGLE DRIVEN TOOL 24

QUADREX 200-250MSY 12 STATION MULTIPLEX8200 (TURRET SUP. 12 STATION) / MULTIPLEXW-200 12 STATION

MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER

25DRIVEN 25

(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY 25(0-180) ADJUSTABLE ANGLE DRIVEN TOOL 25(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY 26(0-180) ADJUSTABLE ANGLE DRIVEN TOOL GEARED-UP 1:2 26


27BROACHING/SLOTTING TOOL 25mm STROKE H=130mm 28BROACHING/SLOTTING TOOL 50mm STROKE H=130mm 28

STATIC 29RADIAL DOUBLE STATIC TOOL 29RADIAL SINGLE STATIC TOOL CAPTO C4 29RADIAL SINGLE STATIC TOOL CAPTO C5 29AXIAL SINGLE STATIC TOOL CAPTO C4 30AXIAL SINGLE STATIC TOOL CAPTO C5 30

STATION - HYPER QUADREX 100/150MSX/MSY 12STATION - HYPER QUADREX 200-250MS/MSY 16STATION

MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16

31DRIVEN 31

RADIAL DRIVEN REDIRECTED IN Z BY 50mm 31RADIAL GEARED UP REDIRECTED IN Z BY 50mm 31

Table of ContentsCategorized Listing



32DRIVEN 32

RADIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y 32AXIAL DRIVEN TOOL 32

DRIVEN 33AXIAL MTSK DRIVEN TOOL 33AXIAL GEARED-UP 1:3 DRIVEN TOOL 33



34DRIVEN 34

AXIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y FOR SUBSPINDLE 34AXIAL MULTIPLE 2/4 OUTLET DRIVEN TOOL IN Y H=118mm 34(0-180) ADJUSTABLE ANGLE DRIVEN TOOL 35(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY 35(0-180) ADJUSTABLE ANGLE DRIVEN TOOL GEARED-UP 1:2 36


36DRIVEN GEAR HOBBER 37

STATIC 38RADIAL SINGLE SIDE TWIN STATIC TOOL 38AXIAL SINGLE BORING BAR HOLDER H=130mm 38AXIAL DOUBLE BORING BAR HOLDER 2+2 POSITIONS IN Y 39AXIAL 3+3 POSITION BORING BAR HOLDER 39AXIAL 6 POSITION BORING BAR HOLDER 40

M/MY - SQT 28/30 - MEGATURN NEXUS 900M -SLANT TURN NEXUS 500/550M - UNIVERSAL2000/3000M - HYPER QUADREX 450M -SQT300/350/400/450M/MY

QT NEXUX 300/350/400/450M/MY - QT NEXUS 300II/350II/400II/450II

41DRIVEN 41

(0-180) ADJUSTABLE ANGLE DRIVEN TOOL 41(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY 41

M/MY - SQT 28/30 - MEGATURN NEXUS 900M -SLANT TURN NEXUS 500/550M - UNIVERSAL2000/3000M - HYPER QUADREX 450M -SQT300/350/400/450M/MY

QT NEXUX 300/350/400/450M/MY - QT NEXUS 300II/350II/400II/450II

42DRIVEN 42

DRIVEN GEAR HOBBER 42MULTIPLEX 630/6300 43

DRIVEN 43AXIAL GEARED-DOWN 2:1 DRIVEN TOOL H=175mm 43

STATIC 44RADIAL SINGLE STATIC TOOL 44

QTC100/200/300M - QTU200/350MQUICK TURN SMART 100M/150M/200M/250M - QT200/250M

45DRIVEN 45

RADIAL DRIVEN TOOL 45AXIAL DRIVEN TOOL 45AXIAL OPPOSITE FACE REAR SET DRIVEN TOOL H=85mm 45


46DRIVEN 46

BROACHING/SLOTTING TOOL 25mm STROKE H=87mm 46BROACHING/SLOTTING TOOL 50mm STROKE H=87mm 46

STATIC 47RADIAL BLADE HOLDER WITH BLADE KIT 47

ACCESSORIES 48DRIVEN 48

MTSK-40 ER ADAPTORS 48MTSK-40 MILL ADAPTORS 48MTSK-50 MILL ADAPTORS 49MTSK-50 SHELL & MILL HOLDERS 49MTSK-63 CLAMPING UNITS ER 50MTSK-63 CLAMPING UNITS MILL 50POLYGON MAKING MILL HEAD (2 INSERTS) 51POLYGON MAKING MILL HEAD (3 INSERTS) 51

Table of ContentsCategorized Listing

SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVENRADIAL DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext. Cool A A1 D LMZK0090225 Radial ERA25 Standard ERA25 1:1 6000 X 83.33MZK0090232 Radial ER32 Standard ER32 1:1 6000 X 97.46MZK0091232 Radial ER32 Cool Thru* ER32 1:1 6000 X X 110.46MZK0092219 Radial Mill Head 22x19mm 22x19 1:1 6000 X 98.8 22 19

RADIAL MTSK DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext Cool AMZK0640140 Radial MTSK40 MTSK40 1:1 6000 X 82.8MZK0640240 Radial MTSK40 Cool Thru* MTSK40 1:1 6000 X X 95.8

All prices are subject to change without notice and we reserve the right to correct misprints.

Mazak Spring 2019 : www.mdtooling.com Phone: 810-632-4446 : Fax: 810-632-4467 1

SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVENRADIAL RE-DIRECTED DRIVEN TOOL 50mm

PartNumber Description Spindle I RPM Ext. Cool A A1 D LMZK0010025 Radial Redirected ER25 ER25 1:1 6000 X 106.1MZK0010032 Radial Redirected ER32 ER32 1:1 6000 X 118.1MZK0010017 Radial Redirected Mill Head 16x17mm 16x17 1:1 6000 X 86 16 17MZK0010019 Radial Redirected Mill Head 22x19mm 22x19 1:1 6000 X 88 22 19MZK0010027 Radial Redirected Mill Head 27x21mm 27x21 1:1 6000 X 90 27 21

GEARED DOWN RADIAL REDIRECTED TOOL IN Z BY 50mm

PartNumber Description Spindle I RPM Ext. Cool A A1 D LMZK0011232 Radial Redirected Geared Down 2:1 ER32 ER32 2:1 3000 X 118.1MZK0011227 Radial Redirected Geared Down 2:1 Mill Head 27x21 2:1 3000 X 90 27 21



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVENGEARED UP RADIAL REDIRECTED TOOL IN Z BY 50mm

PartNumber Description Spindle I RPM Ext. Cool AMZK0012125 Radial Redirected Geared Up 1:2 ER25 ER25 1:2 12000 X 106.2MZK0012132 Radial Redirected Geared Up 1:2 ER32 ER32 1:2 12000 X 118.7

RADIAL REINFORCED REDIRECTED IN Z BY 50mm

PartNumber Description Spindle I RPM Ext. Cool A A1 D LMZK0241125 Radial Reinforced ER25 ER25 1:1 6000 X 111.6MZK0241132 Radial Reinforced ER32 ER32 1:1 6000 X 114.6MZK0241116 Radial Reinforced Mill Head 16x17mm 16x17 1:1 6000 X 88 16 17MZK0241122 Radial Reinforced Mill Head 22x19mm 22x19 1:1 6000 X 90 22 19MZK0241127 Radial Reinforced Mill Head 27x21mm 27x21 1:1 6000 X 92 27 21



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVENRADIAL REINFORCED GEARED-DOWN REDIRECTED IN Z BY 50mm

PartNumber Description Spindle I RPM Ext. Cool A A1 D LMZK0241225 Radial Reinforced Geared-Down ER25 ER25 2:1 3000 X 111.6MZK0241232 Radial Reinforced Geared-Down ER32 ER32 2:1 3000 X 114.6MZK0241216 Radial Reinforced Geared-Down Mill Head 16x17mm 16x17 2:1 3000 X 88 16 17MZK0241222 Radial Reinforced Geared-Down Mill Head 22x19mm 22x19 2:1 3000 X 90 22 19MZK0241227 Radial Reinforced Geared-Down Mill Head 27x21mm 27x21 2:1 3000 X 92 27 21

RADIAL GEARED-UP REINFORCED REDIRECTED IN Z BY 50mm

PartNumber Description Spindle I RPM Ext. Cool AMZK0242125 Radial Geared-Up Reinforced ER25 ER25 1:2 12000 X 111.6MZK0242132 Radial Geared-Up Reinforced ER32 ER32 1:2 12000 X 114.6

RADIAL ±25° ADJUSTABLE ANGLE DRIVEN TOOL RE-DIRECTED BY 50mm

PartNumber Description Spindle I RPM Ext CoolMZK0660332 Radial ±25° Adj. Angle ERA32 Re-Directed by 50mm ERA32 1:1 6000 X



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVENAXIAL DRIVEN TOOL H=80mm

PartNumber Description Spindle I RPM Cool Thru Ext Cool A BMZK0021132 Axial ER32 Standard ER32 1:1 6000 X 99.7 58.5MZK0021232 Axial ER32 Cool Thru* ER32 1:1 6000 X X 99.7 69.5MZK0021140 Axial ER40 Standard ER40 1:1 6000 X 103.7 58.5MZK0021240 Axial ER40 Cool Thru* ER40 1:1 6000 X X 103.7 69.5

AXIAL DRIVEN TOOL H=130mm

PartNumber Description Spindle I RPM Cool Thru Ext. Cool A A1 B D LMZK0020132 Axial ER32 Standard ER32 1:1 6000 X 99.7 58.5MZK0021032 Axial ER32 Cool Thru* ER32 1:1 6000 X X 99.7 69.5MZK0020140 Axial ER40 Standard ER40 1:1 6000 X 103.7 58.5MZK0020240 Axial ER40 Cool Thru* ER40 1:1 6000 X X 103.7 69.5MZK0020022 Axial Mill Head 22x19mm 22x19 1:1 6000 X 78.5 58.5 22 19MZK0020027 Axial Mill Head 27x21mm 27x21 1:1 6000 X 78.5 58.5 27 21



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVENAXIAL MTSK DRIVEN TOOLSee ACCESSORIES for MTSK Clamping Units

PartNumber Description Spindle I RPM Cool Thru Ext. Cool BMZK0280140 Axial MTSK-40 MTSK-40 1:1 6000 X 58.5MZK0280240 Axial MTSK-40 Cool Thru* MTSK-40 1:1 6000 X X 69.5

AXIAL GEARED-UP DRIVEN TOOL

PartNumber Description Spindle I RPM Ext. CoolMZK0390016 Axial Geared-Up Driven Tool ER16 ER16 1:3 18000 X



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVENAXIAL OPPOSITE FACE REAR-SET DRIVEN TOOL

PartNumber Description Spindle I RPM Ext. CoolMZK0210232 Axial Opposite Face Rear-Set ERA32/ERA32 ERA32+ERA32 1:1 6000 X

AXIAL GEARED-UP OPPOSITE FACE TWIN DRIVEN TOOL

PartNumber Description Spindle I RPM Ext. CoolMZK0470225 Axial Opposite Face Geared-Up ERA25+ERA25 ERA25+ERA25 1:2 12000 X



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVEN(0-180) ADJUSTABLE ANGLE DRIVEN TOOL

PartNumber Description Spindle I RPM Ext Cool A A1 D LMZK0580120 (0-180) Adj. Angle ER20 ER20 1:1 6000 X 85.16MZK0580125 (0-180) Adj. Angle ER25 ER25 1:1 6000 X 86.16MZK0580519 (0-180) Adj. Angle 3/4"x3/4" 3/4"x3/4" 1:1 6000 X 65 3/4" 3/4"MZK0580516 (0-180) Adj. Angle 16x17mm 16x17 1:1 6000 X 65 16 17MZK0580522 (0-180) Adj. Angle 22x19mm 22x19 1:1 6000 X 66 22 19

(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY

PartNumber Description Spindle I RPM Ext Cool A A1 D LMZK0530120 (0-180) Adj. Angle ER20 with Digital Display ER20 1:1 6000 X 85.16MZK0530125 (0-180) Adj. Angle ER25 with Digital Display ER25 1:1 6000 X 86.16MZK0530519 (0-180) Adj. Angle 3/4"x3/4" with Digital Display 3/4"x3/4" 1:1 6000 X 65 3/4" 3/4"MZK0530516 (0-180) Adj. Angle 16x17mm with Digital Display 16x17 1:1 6000 X 65 16 17MZK0530522 (0-180) Adj. Angle 22x19mm with Digital Display 22x19 1:1 6000 X 66 22 19



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVEN(0-180) ADJUSTABLE ANGEL DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext. CoolMZK0250120 (0-180) Adj. Angle ERA20 ERA20 1:1 6000 XMZK0250220 (0-180) Adj. Angle ERA20 Cool Thru* ERA20 1:1 6000 X X


PartNumber Description Spindle I RPM Cool Thru Ext CoolMZK0255120 (0-180) Adj. Angle ERA20 with Digital Display ERA20 1:1 6000 XMZK0255220 (0-180) Adj. Angle ERA20 with Digital Display Cool Thru* ERA20 1:1 6000 X X



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVEN(0-180) GEARED UP ADJUSTABLE ANGLE DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext. CoolMZK0250316 (0-180) Adj. Angle Geared Up ERA16 ERA16 1:2 12000 XMZK0250416 (0-180) Adj. Angle Geared Up ERA16 Cool Thru* ERA16 1:2 12000 X X

(0-180) ADJUSTABLE ANGLE DRIVEN TOOL GEARED-UP 1:2 WITH DIGITAL DISPLAY

PartNumber Description Spindle I RPM Cool Thru Ext CoolMZK0255316 (0-180) Adj. Angle ERA16 Geared-Up 1:2 with Digital Display ERA16 1:2 12000 XMZK0255416 (0-180) Adj. Angle ERA16 Geared-Up 1:2 with Digital Display

Cool Thru*ERA16 1:2 12000 X X



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M - IVS200/300MDRIVENBROACHING/SLOTTING TOOL 25mm H=130mm

PartNumber Description I RPM MAX Ext. CoolMZK0440200 Broaching/Slotting Driven Tool 25mm Stroke H=130mm 4:1 2400 X

BROACHING/SLOTTING TOOL 50mm H=130mm




SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250MSTATICRADIAL SINGLE TOOL STATIC HOLDER

PartNumber Description # of Tools Dimension B HMZK0032540 Radial Single Tool : 1" 1/2 Inch 1" 1"MZK0032500 Radial Single Tool : 25mm 1/2 mm 25 25

RADIAL SINGLE TOOL DOUBLE SIDED STATIC HOLDER

PartNumber Description # of Tools Dimension B HMZK0042540 Radial Double Tool: 1" 2/4 Inch 1" 1"MZK0042500 Radial Double Tool: 25mm 2/4 mm 25 25

RADIAL DOUBLE BLADE HOLDER WITH BLADE KIT

PartNumber Description # of ToolsMZK0060132 Radial Double Blade Holder 1BLADEKIT Blade Kit: 1 Blade, 10 Inserts



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250MSTATICRADIAL DOUBLE BLADE HOLDER INTERNAL COOLANT (BLADEKIT NOT INCLUDED)

PartNumber Description # of Tools Ext Cool Cool ThruMZK0570132 Radial Double Blade Holder Cool Thru* 1 X XCOOL THRU BLADEKIT Blade Kit: 1 Blade, 10 Inserts

AXIAL SINGLE TOOL STATIC HOLDER

PartNumber Description # of Tools Dimension B HMZK0052540 Axial Single Tool: 1" 1/2 Inch 1" 1"MZK0052500 Axial Single Tool: 25mm 1/2 mm 25 25

AXIAL SINGLE BORING BAR HOLDER H=130mm

PartNumber Description # of Tools Cool Thru Ext. Cool Dimension D HMZK0073810 Axial Boring Bar Holder: 1-1/2" 1 X X Inch 1-1/2" 130MZK0074000 Axial Boring Bar Holder: 40mm 1 X X mm 40 130KIT1003003 40mm Plug to Make BBH Cool ThruKIT1003004 1-1/2" Plug to Make BBH Cool Thru



SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250MSTATICAXIAL SINGLE BORING BAR HOLDER H=140mm

PartNumber Description # of Tools Cool Thru Ext. Cool Dimension D HMZK0083810 Axial Boring Bar Holder: 1-1/2" 1 X X Inch 1-1/2" 140MZK0084000 Axial Boring Bar Holder: 40mm 1 X X mm 40 140KIT1000003 40mm Plug to Make BBH Cool ThruKIT1000004 1-1/2" Plug to Make BBH Cool Thru

AXIAL 3+3 POSITION BORING BAR HOLDERTHIS TOOL WILL ONLY FIT THE FOLLOWING MACHINE MODELS:SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12 STATION - SUPER QUADREX 200-250M

PartNumber Description # of Tools Cool Thru Ext. CoolMZK0222500 Axial 3+3 Position BBH 25mm 3+3 X XKIT1000024 25mm Plug to Make BBH Cool Thru



SQT 15-18M/MS/MY/MSY 16 STATION - QT NEXUS 200-250M/MS/MY/MSY 16 STATION - QT NEXUS 200II-250IIM/MS/MY/MSY16 STATION - QT NEXUS 100-150M/MS 12 STATION - QT NEXUS 100IIM/MS - SQT100M/MS/MY/MSY - SQT10M/MS 12 STATION- SQT200-250M/MS/MY/MSY 16 STATIONDRIVEN(0-180) ADJUSTABLE ANGLE DRIVEN TOOL






SQT 15-18M/MS/MY/MSY 16 STATION - QT NEXUS 200-250M/MS/MY/MSY 16 STATION - QT NEXUS 200II-250IIM/MS/MY/MSY16 STATION - QT NEXUS 100-150M/MS 12 STATION - QT NEXUS 100IIM/MS - SQT100M/MS/MY/MSY - SQT10M/MS 12 STATION- SQT200-250M/MS/MY/MSY 16 STATIONDRIVEN(0-180) GEARED UP ADJUSTABLE ANGLE DRIVEN TOOL ERA16


(0-180) ADJUSTABLE ANGLE GEARED-UP 1:2 WITH DIGITAL DISPLAY

PartNumber Description Spindle I RPM Cool Thru Ext CoolMZK0265316 (0-180) Adj. Angle Geared-Up ERA16 with Digital Display ERA16 1:2 12000 XMZK0265416 (0-180) Adj. Angle Geared-Up ERA16 with Digital Display




SQT 15-18M/MS/MY/MSY 16 STATION - QT NEXUS 200-250M/MS/MY/MSY 16 STATION - QT NEXUS 200II-250IIM/MS/MY/MSY16 STATION - QT NEXUS 100-150M/MS 12 STATION - QT NEXUS 100IIM/MS - SQT100M/MS/MY/MSY - SQT10M/MS 12 STATION- SQT200-250M/MS/MY/MSY 16 STATIONDRIVENDRIVEN GEAR HOBBER

PartNumber Description I RPM MAX Ext. Cool D (mm) D (Inch)MZK0351100 Driven Gear Hobber 1:1 6000 X 16-22-27-32 3/4"-1"-1-1/4"MZK0352100 Driven Gear Hobber Geared-Down 2:1 3000 X 16-22-27-32 3/4"-1"-1-1/4"



SQT 15-18M/MS/MY/MSY 16 STATION - QT NEXUS 200-250M/MS/MY/MSY 16 STATION - QT NEXUS 200II-250IIM/MS/MY/MSY16 STATION - QT NEXUS 100-150M/MS 12 STATION - SQT100M/MS/MY/MSY - SQT10M/MS 12 STATION -SQT200-250M/MS/MY/MSY 16 STATIONSTATICAXIAL SINGLE BORING BAR HOLDER H=130mm

PartNumber Description # of Tools Cool Thru Ext Cool Dimensions DMZK0653175 Axial Single Boring Bar Holder 1-1/4" 1 X X Inch 1-1/4MZK0653200 Axial Single Boring Bar Holder 32mm 1 X X mm 32KIT1000001 Plug for 32mm or 1-1/4" to Make BBH Cool Thru



MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVENRADIAL REDIRECTED DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext. Cool A A1 D LMZK0121125 Radial Redirected ER25 ER25 1:1 6000 X 120.1MZK0121132 Radial Redirected ER32 ER32 1:1 6000 X 132.1MZK0121032 Radial Redirected ER32 Cool Thru* ER32 1:1 6000 X X 132.1MZK0121116 Radial Redirected Mill Head 16x17mm 16x17 1:1 6000 X 100 16 17MZK0121122 Radial Redirected Mill Head 22x19mm 22x19 1:1 6000 X 102 22 19MZK0121127 Radial Redirected Mill Head 21x27mm 27x21 1:1 6000 X 104 27 21

RADIAL GEARED UP REDIRECTED DRIVEN TOOL

PartNumber Description Spindle I RPM Ext. Cool AMZK0122125 Radial Geared-Up 1:2 ER25 ER25 1:2 12000 X 120.2MZK0122132 Radial Geared-Up 1:2 ER32 ER32 1:2 12000 X 132.7



MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVENRADIAL GEARED DOWN REDIRECTED DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext. Cool A A1 D LMZK0121232 Radial Geared-Down 2:1 ER32 ER32 2:1 3000 X 132.1MZK0122432 Radial Geared-Down 2:1 ER32 Cool Thru* ER32 2:1 3000 X X 132.1MZK0121227 Radial Geared-Down Mill Head 27x21mm 27x21 2:1 3000 X 104 27 21

RADIAL REINFORCED REDIRECTED IN Z BY 50mm

PartNumber Description Spindle I RPM Cool Thru Ext. Cool A A1 D LMZK0231125 Radial Reinforced ER25 ER25 1:1 6000 X 125.6MZK0231025 Radial Reinforced ER25 Cool Thru* ER25 1:1 6000 X X 125.6MZK0231132 Radial Reinforced ER32 ER32 1:1 6000 X 128.6MZK0231032 Radial Reinforced ER32 Cool Thru* ER32 1:1 6000 X X 128.6MZK0231116 Radial Reinforced Mill Head 16x17mm 16x17 1:1 6000 X 102 16 17MZK0231122 Radial Reinforced Mill Head 22x19mm 22x19 1:1 6000 X 104 22 19MZK0231127 Radial Reinforced Mill Head 27x21mm 27x21 1:1 6000 X 106 27 21



MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVENRADIAL REINFORCED GEARED-DOWN REDIRECTED IN Z BY 50mm

PartNumber Description Spindle I RPM Cool Thru Ext. Cool A A1 D LMZK0231225 Radial Geared-Down ER25 ER25 2:1 3000 X 125.6MZK0232425 Radial Geared Down ER25 Cool Thru* ER25 2:1 3000 X X 125.6MZK0231232 Radial Geared-Down ER32 ER32 2:1 3000 X 128.6MZK0232432 Radial Geared-Down ER32 Cool Thru* ER32 2:1 3000 X X 128.6MZK0231216 Radial Mill Head Geared-Down 16x17mm 16x17 2:1 3000 X 102 16 17MZK0231222 Radial Mill Head Geared-Down 22x19mm 22x19 2:1 3000 X 104 22 19MZK0231227 Radial Mill Head Geared-Down 27x21mm 27x21 2:1 3000 X 106 27 21

RADIAL GEARED UP REDIRECTED DRIVEN TOOL IN Z BY 50mm

PartNumber Description Spindle I RPM Ext. Cool AMZK0232125 Radial Reinforced Geared-Up ER25 ER25 1:2 12000 X 125.6MZK0232132 Radial Reinforced Geared-Up ER32 ER32 1:2 12000 X 128.6



MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVENAXIAL DRIVEN TOOL H=130mm

PartNumber Description Spindle I RPM Cool Thru Ext. Cool A A1 B D LMZK0130132 Axial ER32 Standard ER32 1:1 6000 X 99.7 58.5MZK0131032 Axial ER32 Cool Thru* ER32 1:1 6000 X X 99.7 69.5MZK0130140 Axial ER40 Standard ER40 1:1 6000 X 103.7 58.5MZK0130240 Axial ER40 Cool Thru* ER40 1:1 6000 X X 103.7 69.5MZK0132219 Axial Mill Head 22x19mm 22x19 1:1 6000 X 78.5 58.5 22 19MZK0132721 Axial Mill Head 27x21mm 27x21 1:1 6000 X 78.5 58.5 27 21

AXIAL MTSK DRIVEN TOOLSee ACCESSORIES for MTSK Clamping Units

PartNumber Description Spindle I RPM Cool Thru Ext. Cool BMZK0290140 Axial MTSK-40 MTSK-40 1:1 6000 X 58.5MZK0290240 Axial MTSK-40 Cool Thru* MTSK-40 1:1 6000 X X 69.5



MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVENAXIAL GEARED-DOWN DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext. Cool BMZK0480132 Axial Geared-Down Driven Tool ER32 ER32 2:1 3000 X 61.5MZK0480232 Axial Geared-Down Driven Tool ER32 Cool Thru* ER32 2:1 3000 X X 71.5

AXIAL GEARED-UP 1:3 DRIVEN TOOL

PartNumber Description Spindle I RPM Ext CoolMZK0620125 Axial Geared-Up 1:3 ER25 ER25 1:3 18000 X



MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVENAXIAL GEARED-UP 1:3 DRIVEN TOOL

PartNumber Description Spindle I RPM Ext. CoolMZK0370016 Axial Geared-Up 1:3 ER16 ER16 1:3 18000 X

(0-180) ADJUSTABLE ANGLE DRIVEN TOOL




MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVEN(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY


(0-180) ADJUSTABLE ANGLE DRIVEN TOOL




MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVEN(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY


(0-180) ADJUSTABLE ANGLE DRIVEN TOOL GEARED-UP 1:2




MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVEN(0-180) ADJUSTABLE ANGLE DRIVEN TOOL GEARED-UP 1:2 WITH DIGITAL DISPLAY

PartNumber Description Spindle I RPM Cool Thru Ext CoolMZK0275316 (0-180) Adj. Angle Geared-Up ERA16 with Digital Display ERA16 1:2 12000 XMZK0275416 (0-180) Adj. Angle Geared-Up ERA16 with Digital Display Cool

Thru*ERA16 1:2 12000 X X



MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONDRIVENBROACHING/SLOTTING TOOL 25mm STROKE H=130mm


BROACHING/SLOTTING TOOL 50mm STROKE H=130mm




MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONSTATICRADIAL DOUBLE STATIC TOOLTHIS TOOL WILL ONLY FIT THE FOLLOWING MACHINE MODELS:HYPER QUADREX 200-250MSY 12 STATION

PartNumber Description # of Tools Dimensions B HMZK0842500 Radial Double Static Tool 25mm 2 mm 25 25

RADIAL SINGLE STATIC TOOL CAPTO C4

PartNumber Description # of Tools Cool Thru SizeMZK0514010 Radial Single Static Capto C4 1 X C4

RADIAL SINGLE STATIC TOOL CAPTO C5

PartNumber Description # of Tools Cool Thru Size MZK0515010 Radial Single Static Capto C5 1 X C5



MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX 200-250MSY 12 STATION MULTIPLEX 8200 (TURRETSUP. 12 STATION) / MULTIPLEX W-200 12 STATIONSTATICAXIAL SINGLE STATIC TOOL CAPTO C4

PartNumber Description # of Tools Cool Thru SizeMZK0524010 Axial Single Static Capto C4 1 X C4

AXIAL SINGLE STATIC TOOL CAPTO C5

PartNumber Description # of Tools Cool Thru SizeMZK0525010 Axial Single Static Capto C5 1 X C5



MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONDRIVENRADIAL DRIVEN REDIRECTED IN Z BY 50mm

PartNumber Description Spindle RPM Ext. Cool A A1 D LMZK0201125 Radial Redirected ER25 ER25 6000 X 106.1MZK0201132 Radial Redirected ER32 ER32 6000 X 118.1MZK0201116 Radial Mill Head D=16mm, L=17mm 16x17 6000 X 86 16 17MZK0201122 Radial Mill Head D=22mm, L=19mm 22x19 6000 X 88 22 19MZK0201127 Radial Mill Head D=27mm, L=21mm 27x21 6000 X 90 27 21

RADIAL GEARED UP REDIRECTED IN Z BY 50mm

PartNumber Description Spindle I RPM Ext. Cool AMZK0202125 Radial Redirected Geared-Up ER25 ER25 1:2 12000 X 106.2MZK0202132 Radial Redirected Geared-Up ER32 ER32 1:2 12000 X 118.7



MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONDRIVENRADIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN YTHIS TOOL WILL ONLY FIT THE FOLLOWING MACHINE MODELS:HYPER QUADREX 100/150MSY 12 STATION - HYPER QUADREX 200/250MSY 16 STATION

PartNumber Description Spindle I RPM Ext CoolMZK0760225 Radial Single Side Twin Head ERA25 ERA25 1:1 6000 X

AXIAL DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext. Cool A B A1 D LMZK0410132 Axial Driven Tool ER32 ER32 1:1 6000 X 99.7 58.5MZK0410232 Axial Driven Tool ER32 Cool Thru* ER32 1:1 6000 X X 99.7 69.5MZK0410140 Axial Driven Tool ER40 ER40 1:1 6000 X 103.7 58.5MZK0410240 Axial Driven Tool ER40 Cool Thru* ER40 1:1 6000 X X 103.7 69.5MZK0410522 Axial Mill Head 22x19mm 22x19 1:1 6000 X 58.5 78.5 22 19MZK0410527 Axial Mill Head 27x21mm 27x21 1:1 6000 X 58.5 78.5 27 21



MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONDRIVENAXIAL MTSK DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext. Cool BMZK0420140 Axial MTSK-40 Driven Tool MTSK-40 1:1 6000 X 58.5MZK0420240 Axial MTSK-40 Driven Tool Cool Thru* MTSK-40 1:1 6000 X X 69.5

AXIAL GEARED-UP 1:3 DRIVEN TOOL

PartNumber Description Spindle I RPM Ext. CoolMZK0430016 Axial Geared-Up 1:3 Driven Tool ER16 ER16 1:3 18000 X



MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONDRIVENAXIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y FOR SUBSPINDLETHIS TOOL WILL ONLY FIT THE FOLLOWING MACHINE MODELS:HYPER QUADREX 200/250MSY 16 STATION

PartNumber Description Spindle I RPM Ext CoolMZK0720225 Axial Single Side Twin Head ER25 ER25 1:1 6000 X

AXIAL MULTIPLE 2/4 OUTLET DRIVEN TOOL IN Y H=118mmTHIS TOOL WILL ONLY FIT THE FOLLOWING MACHINE MODELS: HYPER QUADREX 100/150MSY 12 STATION - HYPER QUADREX 200/250MSY 16 STATION

PartNumber Description Spindle I RPM # of Tools Ext Cool A BMZK0680120 Axial Multiple 2/4 Outlet ER20 ER20 1:1 6000 2 X 113.2MZK0680220 Axial Multiple 2/4 Outlet ER20+ER20 ER20+ER20 1:1 6000 2+2 X 113.2 113.2



MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONDRIVEN(0-180) ADJUSTABLE ANGLE DRIVEN TOOL






MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONDRIVEN(0-180) ADJUSTABLE ANGLE DRIVEN TOOL GEARED-UP 1:2

PartNumber Description Spindle I RPM Cool Thru Ext. CoolMZK0550316 (0-180) Adj. Angle Geared-Up 1:2 ERA16 ERA16 1:2 12000 XMZK0550416 (0-180) Adj. Angle Geared-Up 1:2 ERA16 Cool Thru* ERA16 1:2 12000 X X

(0-180) ADJUSTABLE ANGLE DRIVEN TOOL GEARED-UP 1:2 WITH DIGITAL DISPLAY

PartNumber Description Spindle I RPM Cool Thru Ext CoolMZK0555316 (0-180) Adj. Angle Geared-Up ERA16 with Digital Display ERA16 1:2 12000 XMZK0555416 (0-180) Adj. Angle Geared-Up ERA16 with Digital Display




MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONDRIVENDRIVEN GEAR HOBBER

PartNumber Description I RPM Ext. Cool D (mm) D (inch)MZK0191100 Gear Hobber 1:1 6000 X 16-22-27-32 3/4"-1"-1 1/4"MZK0192100 Geared-Down Gear Hobber 2:1 2:1 3000 X 16-22-27-32 3/4"-1"-1 1/4"



MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONSTATICRADIAL SINGLE SIDE TWIN STATIC TOOLTHIS TOOL WILL ONLY FIT THE FOLLOWING MACHINE MODELS: HYPER QUADREX 100/150MSY 12 STATION - HYPER QUADREX 200/250MSY 16 STATION

PartNumber Description Ext Cool Dimensions H BMZK0751905 Radial Single Twin Static Tool 3/4" X Inch 3/4" 3/4"

AXIAL SINGLE BORING BAR HOLDER H=130mm

PartNumber Description # of Tools Cool Thru Ext. Cool DimensionsMZK0563200 Axial Single Boring Bar Holder 32mm H=130mm 1 X X mmKIT1000020 Plug for 32mm BBH to Make Cool Thru



MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONSTATICAXIAL DOUBLE BORING BAR HOLDER 2+2 POSITIONS IN YTHIS TOOL WILL ONLY FIT THE FOLLOWING MACHINE MODELS:HYPER QUADREX 100/150MSY 12 STATION - HYPER QUADREX 200/250MSY 16 STATION

PartNumber Description # of Tools Cool Thru Ext Cool Dimensions DMZK0743175 Axial 2+2 Double Boring Bar Holder 1-1/4" 2+2 X X Inch 1-1/4MZK0742000 Axial 2+2 Double Boring Bar Holder 20mm 2+2 X X mm 20KIT1000015 20mm Plug to Make BBH Cool Thru

AXIAL 3+3 POSITION BORING BAR HOLDERTHIS TOOL WILL ONLY FIT THE FOLLOWING MACHINE MODELS:HYPER QUADREX 100/150MSY 12 STATION - HYPER QUADREX 200/250MSY 16 STATION

PartNumber Description # of Tools Ext Cool Cool Thru Dimensions DMZK0692000 Axial 3+3 Position BBH 20mm 3+3 X X mm 20KIT1000015 20mm Plug to Make BBH Cool Thru



MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 16 STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION -HYPER QUADREX 200-250MS/MSY 16 STATIONSTATICAXIAL 6 POSITION BORING BAR HOLDERTHIS TOOL WILL ONLY FIT THE FOLLOWING MACHINE MODELS:HYPER QUADREX 100/150MSY 12 STATION - HYPER QUADREX 200/250MSY 16 STATION

PartNumber Description # of Tools Ext Cool Dimensions DMZK0701905 Axial 6 Position BBH 3/4" 6 X Inch 3/4"



QT NEXUX 300/350/400/450M/MY - QT NEXUS 300II/350II/400II/450II M/MY - SQT 28/30 - MEGATURN NEXUS 900M - SLANTTURN NEXUS 500/550M - UNIVERSAL 2000/3000M - HYPER QUADREX 450M - SQT300/350/400/450M/MYDRIVEN(0-180) ADJUSTABLE ANGLE DRIVEN TOOL






QT NEXUX 300/350/400/450M/MY - QT NEXUS 300II/350II/400II/450II M/MY - SQT 28/30 - MEGATURN NEXUS 900M - SLANTTURN NEXUS 500/550M - UNIVERSAL 2000/3000M - HYPER QUADREX 450M - SQT300/350/400/450M/MYDRIVENDRIVEN GEAR HOBBER

PartNumber Description I RPM Ext. Cool D (mm) D (inch)MZK0171100 Gear Hobber 1:1 6000 X 16-22-27-32 3/4"-1"-1 1/4"MZK0172100 Geared-Down Gear Hobber 2:1 2:1 3000 X 16-22-27-32 3/4"-1"-1 1/4"



MULTIPLEX 630/6300DRIVENAXIAL GEARED-DOWN 2:1 DRIVEN TOOL H=175mm

PartNumber Description Spindle I RPM Cool Thru Ext. Cool BMZK0360140 Axial Geared-Down 2:1 Driven Tool ER40 ER40 2:1 2000 X 63MZK0360240 Axial Geared-Down 2:1 Driven Tool ER40 Cool Thru* ER40 2:1 2000 X X 76.5



MULTIPLEX 630/6300STATICRADIAL SINGLE STATIC TOOL

PartNumber Description # of Tools Dimensions B HMZK0302540 Radial Single Static Tool 1" 1/2 Inch 1" 1"MZK0302500 Radial Single Static Tool 25mm 1/2 mm 25 25



QUICK TURN SMART 100M/150M/200M/250M - QT200/250M - QTC100/200/300M - QTU200/350MDRIVENRADIAL DRIVEN TOOL

PartNumber Description Spindle I RPM Ext. CoolMZK0320332 Radial ERA32 Standard ERA32 1:1 6000 X

AXIAL DRIVEN TOOL

PartNumber Description Spindle I RPM Cool Thru Ext. Cool BMZK0310332 Axial ERA32 Standard ERA32 1:1 6000 X 60.4MZK0310432 Axial ERA32 Cool Thru* ERA32 1:1 6000 X X 74

AXIAL OPPOSITE FACE REAR SET DRIVEN TOOL H=85mm

PartNumber Description Spindle I RPM Ext CoolMZK0810232 Axial Opposite Face Rear Set ERA32+ERA32 ERA32+ERA32 1:1 6000 X



QUICK TURN SMART 100M/150M/200M/250M - QT200/250M - QTC100/200/300M - QTU200/350MDRIVENBROACHING/SLOTTING TOOL 25mm STROKE H=87mm


BROACHING/SLOTTING TOOL 50mm STROKE H=87mm




QUICK TURN SMART 100M/150M/200M/250M - QT200/250M - QTC100/200/300M - QTU200/350MSTATICRADIAL BLADE HOLDER WITH BLADE KIT

PartNumber Description # of Tools Ext. CoolMZK0330132 Radial Blade Holder 1 XBLADEKIT Blade Kit: 1 Blade, 10 Inserts



ACCESSORIESDRIVENMTSK-40 ER ADAPTORS

PartNumber Description Spindle AMTSK40B03 MTSK-40 Adaptor ERA20 ERA20 14MTSK40A03 MTSK-40 Adaptor ER25 ER25 32.6MTSK40B02 MTSK-40 Adaptor ERA25 ERA25 16MTSK40A02 MTSK-40 Adaptor ER32 ER32 35.6

MTSK-40 MILL ADAPTORS

PartNumber Description Spindle Dimension A D LMTSK40C03 MTSK-40 Adaptor Mill 3/4" 3/4"x3/4" Inch 15.5 3/4" 3/4"MTSK40C02 MTSK-40 Adaptor Mill 16x17 16x17 mm 15 16 17MTSK40C04 MTSK-40 Adaptor Mill 22x19 22x19 mm 17 22 19MTSK40C05 MTSK-40 Adaptor Mill 27x21 27x21 mm 22 27 21MTSK40D11 MTSK-40 Adaptor Weldon 1/4" Weldon 1/4" 8MTSK40D12 MTSK-40 Adaptor Weldon 5/16" Weldon 5/16" 8MTSK40D13 MTSK-40 Adaptor Weldon 3/8" Weldon 3/8" 9MTSK40D14 MTSK-40 Adaptor Weldon 1/2" Weldon 1/2" 14



ACCESSORIESDRIVENMTSK-50 MILL ADAPTORS

PartNumber Description Spindle A Cool Thru Ext CoolMTSK50B03 MTSK-50 Adaptors ERA20 ERA20 9mm X XMTSK50A03 MTSK-50 Adaptors ER25 ER25 32.6mm X XMTSK50B02 MTSK-50 Adaptors ERA25 ERA25 14mm X XMTSK50A02 MTSK-50 Adaptors ER32 ER32 35.6mm X XMTSK50B01 MTSK-50 Adaptors ERA32 ERA32 19mm X XMTSK50A01 MTSK-50 Adaptors ER40 ER40 46.6mm X X

MTSK-50 SHELL & MILL HOLDERS

PartNumber Description Spindle A D L Cool Thru Ext CoolMTSK50C03 MTSK-50 Adaptors Mill 3/4"x3/4" 5/8" 3/4" 3/4" XMTSK50C05 MTSK-50 Adaptors Mill 1"x3/4" 3/4" 1" 3/4" XMTSK50C02 MTSK-50 Adaptors Mill 16x17mm 15 16 17 XMTSK50C04 MTSK-50 Adaptors Mill 22x19mm 17 22 19 XMTSK50C06 MTSK-50 Adaptors Mill 27x21mm 19 27 21 XMTSK50D11 MTSK-50 Adaptor Weldon 1/4" ID 8 X XMTSK50D12 MTSK-50 Adaptor Weldon 5/16" ID 8 X XMTSK50D13 MTSK-50 Adaptor Weldon 3/8" ID 8 X XMTSK50D14 MTSK-50 Adaptor Weldon 1/2" ID 9 X XMTSK50D15 MTSK-50 Adaptor Weldon 5/8" ID 12 X XMTSK50E01 MTSK-50 Adaptor Weldon POWERGRIP PG25 40 X X



ACCESSORIESDRIVENMTSK-63 CLAMPING UNITS ER

PartNumber Description Spindle A Cool Thru Ext CoolMTSK63A04 MTSK-63 Clamping Unit ER25 ER25 33.6 X XMTSK63B03 MTSK-63 Clamping Unit ERA25 ERA25 10 X XMTSK63A03 MTSK-63 Clamping Unit ER32 ER32 36.6 X XMTSK63B02 MTSK-63 Clamping Unit ERA32 ERA32 18 X XMTSK63A02 MTSK-63 Clamping Unit ER40 ER40 39.6 X XMTSK63B01 MTSK-63 Clamping Unit ERA40 ERA40 20 X XMTSK63A01 MTSK-63 Clamping Unit ER50 ER50 53.9 X X

MTSK-63 CLAMPING UNITS MILL

PartNumber Description Spindle A D L Ext CoolMTSK63C03 MTSK-63 Clamping Unit 3/4"x3/4" 3/4"x3/4" 5/8" 3/4" 3/4" XMTSK63C05 MTSK-63 Clamping Unit 1"x3/4" 1"x3/4" 3/4" 1" 3/4" XMTSK63C02 MTSK-63 Clamping Unit 16x17 16x17mm 16 16 17 XMTSK63C04 MTSK-63 Clamping Unit 22x19 22x19mm 18 22 19 XMTSK63C06 MTSK-63 Clamping Unit 27x21 27x21mm 20 27 21 XMTSK63E01 MTSK-63 POWERGRIP PG32 POWERGRIP PG32 53 X



ACCESSORIESDRIVENPOLYGON MAKING MILL HEAD (2 INSERTS)

PartNumber DescriptionP01Z20A100 2-Insert Polygon Making Head (with Inserts)TPGN220408 10 Inserts for Polygon Making Heads

POLYGON MAKING MILL HEAD (3 INSERTS)

PartNumber DescriptionP01Z30A100 2-Insert Polygon Making Head (with Inserts)TPGN220408 10 Inserts for Polygon Making Heads



ER COLLET NUMBER DESCRIPTION MD LIST PRICE

ER16-SET ER16 Collet Set (11 Collets) 150.00$

ERX16-SET ER16 Sealed Collet Set (9 Collets) 220.00$

ER20 SET ER20 Collet Set (15 Collets) 220.00$








LIVE TOOL WRENCHESER COLLET NUMBER DESCRIPTION

From List Above ER Collet Wrench (Identify Holder)

From List Above Spindle Locking Wrench (Identify Holder)

Phone: 810-632-4446 : Fax: 810-632-4467

ER COLLETS

((0-180) ADJUSTABLE ANGEL DRIVEN TOOL 9(0-180) ADJUSTABLE ANGLE DRIVEN TOOL 8, 15, 24-25, 35, 41(0-180) ADJUSTABLE ANGLE DRIVEN TOOL GEARED-UP 1:2 26, 36


10, 27, 36

25-26, 35, 41(0-180) ADJUSTABLE ANGLE DRIVEN TOOL WITH DIGITAL DISPLAY 8-9, 15,

(0-180) ADJUSTABLE ANGLE GEARED-UP 1:2 WITH DIGITAL DISPLAY 16(0-180) GEARED UP ADJUSTABLE ANGLE DRIVEN TOOL 10(0-180) GEARED UP ADJUSTABLE ANGLE DRIVEN TOOL ERA16 16

AACCESSORIES 48-51AXIAL 3+3 POSITION BORING BAR HOLDER 14, 39AXIAL 6 POSITION BORING BAR HOLDER 40AXIAL DOUBLE BORING BAR HOLDER 2+2 POSITIONS IN Y 39AXIAL DRIVEN TOOL 32, 45AXIAL DRIVEN TOOL H=130mm 5, 22AXIAL DRIVEN TOOL H=80mm 5AXIAL GEARED-DOWN 2:1 DRIVEN TOOL H=175mm 43AXIAL GEARED-DOWN DRIVEN TOOL 23AXIAL GEARED-UP 1:3 DRIVEN TOOL 23-24AXIAL GEARED-UP 1:3 DRIVEN TOOL 33AXIAL GEARED-UP DRIVEN TOOL 6AXIAL GEARED-UP OPPOSITE FACE TWIN DRIVEN TOOL 7AXIAL MTSK DRIVEN TOOL 6, 22, 33AXIAL MULTIPLE 2/4 OUTLET DRIVEN TOOL IN Y H=118mm 34AXIAL OPPOSITE FACE REAR SET DRIVEN TOOL H=85mm 45AXIAL OPPOSITE FACE REAR-SET DRIVEN TOOL 7AXIAL SINGLE BORING BAR HOLDER H=130mm 13, 18, 38AXIAL SINGLE BORING BAR HOLDER H=140mm 14AXIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y FOR SUBSPINDLE 34AXIAL SINGLE STATIC TOOL CAPTO C4 30AXIAL SINGLE STATIC TOOL CAPTO C5 30AXIAL SINGLE TOOL STATIC HOLDER 13

BBROACHING/SLOTTING TOOL 25mm H=130mm 11BROACHING/SLOTTING TOOL 25mm STROKE H=130mm 28BROACHING/SLOTTING TOOL 25mm STROKE H=87mm 46BROACHING/SLOTTING TOOL 50mm H=130mm 11BROACHING/SLOTTING TOOL 50mm STROKE H=130mm 28BROACHING/SLOTTING TOOL 50mm STROKE H=87mm 46

DDRIVEN 1-11, 15-17, 19-28, 31-37, 41-43, 45-46, 48-51DRIVEN GEAR HOBBER 17, 37, 42

GGEARED DOWN RADIAL REDIRECTED TOOL IN Z BY 50mm 2GEARED UP RADIAL REDIRECTED TOOL IN Z BY 50mm 3

MMTSK-40 ER ADAPTORS 48MTSK-40 MILL ADAPTORS 48MTSK-50 MILL ADAPTORS 49MTSK-50 SHELL & MILL HOLDERS 49MTSK-63 CLAMPING UNITS ER 50MTSK-63 CLAMPING UNITS MILL 50

200-250MSY 12 STATION MULTIPLEX 8200 (TURRET SUP.12 STATION) / MULTIPLEX W-200 12 STATION

MULTIPLEX 420-620-625-6200-6250 12 STATION / HYPER QUADREX19-30

STATION - HYPER QUADREX 100/150MSX/MSY 12 STATION- HYPER QUADREX 200-250MS/MSY 16 STATION

MULTIPLEX 610/6100 12 STATION - MULTIPLEX 620/6200 1631-40

MULTIPLEX 630/6300 43-44

POLYGON MAKING MILL HEAD (3 INSERTS) 51


45-47

RADIAL BLADE HOLDER WITH BLADE KIT 47

INCLUDED)RADIAL DOUBLE BLADE HOLDER INTERNAL COOLANT (BLADEKIT NOT

13RADIAL DOUBLE BLADE HOLDER WITH BLADE KIT 12RADIAL DOUBLE STATIC TOOL 29RADIAL DRIVEN REDIRECTED IN Z BY 50mm 31RADIAL DRIVEN TOOL 1, 45RADIAL GEARED DOWN REDIRECTED DRIVEN TOOL 20RADIAL GEARED UP REDIRECTED DRIVEN TOOL 19RADIAL GEARED UP REDIRECTED DRIVEN TOOL IN Z BY 50mm 21RADIAL GEARED UP REDIRECTED IN Z BY 50mm 31RADIAL GEARED-UP REINFORCED REDIRECTED IN Z BY 50mm 4RADIAL MTSK DRIVEN TOOL 1RADIAL REDIRECTED DRIVEN TOOL 19RADIAL RE-DIRECTED DRIVEN TOOL 50mm 2RADIAL REINFORCED GEARED-DOWN REDIRECTED IN Z BY 50mm 4, 21RADIAL REINFORCED REDIRECTED IN Z BY 50mm 3, 20RADIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y 32RADIAL SINGLE SIDE TWIN STATIC TOOL 38RADIAL SINGLE STATIC TOOL 44RADIAL SINGLE STATIC TOOL CAPTO C4 29RADIAL SINGLE STATIC TOOL CAPTO C5 29RADIAL SINGLE TOOL DOUBLE SIDED STATIC HOLDER 12RADIAL SINGLE TOOL STATIC HOLDER 12

12 STATION - QT NEXUS 200-250M/MS/MY/MSY 12STATION - QT NEXUS 200II-250II M/MS/MY/MSY 12STATION - SUPER QUADREX 200-250M


12-14

STATION - QT NEXUS 200-250M/MS/MY/MSY 12 STATION -QT NEXUS 200II-250II M/MS/MY/MSY 12 STATION - SUPERQUADREX 200-250M - IVS200/300M

SQT 15-18M/MS/MY/MSY 12 STATION - SQT200-250M/MS/MY/MSY 12

1-11

200-250M/MS/MY/MSY 16 STATION - QT NEXUS200II-250IIM/MS/MY/MSY 16 STATION - QT NEXUS100-150M/MS 12 STATION - QT NEXUS 100IIM/MS -SQT100M/MS/MY/MSY - SQT10M/MS 12 STATION -SQT200-250M/MS/MY/MSY 16 STATION


15-17

200-250M/MS/MY/MSY 16 STATION - QT NEXUS200II-250IIM/MS/MY/MSY 16 STATION - QT NEXUS100-150M/MS 12 STATION - SQT100M/MS/MY/MSY -SQT10M/MS 12 STATION - SQT200-250M/MS/MY/MSY 16STATION


18STATIC 12-13, 18, 29-30, 38-40, 44, 47

PPOLYGON MAKING MILL HEAD (2 INSERTS) 51

Q300II/350II/400II/450II M/MY - SQT 28/30 - MEGATURNNEXUS 900M - SLANT TURN NEXUS 500/550M -UNIVERSAL 2000/3000M - HYPER QUADREX 450M -SQT300/350/400/450M/MY

QT NEXUX 300/350/400/450M/MY - QT NEXUS

41-42

RRADIAL ±25° ADJUSTABLE ANGLE DRIVEN TOOL RE-DIRECTED BY 50mm 4

SSee ACCESSORIES for MTSK Clamping Units 6, 22

Table of ContentsAlphabetized Listing

B12BLADEKIT Blade Kit: 1 Blade, 10 Inserts47BLADEKIT Blade Kit: 1 Blade, 10 Inserts

C13COOL THRU

BLADEKITBlade Kit: 1 Blade, 10 Inserts

K18KIT1000001 Plug for 32mm or 1-1/4" to Make BBH Cool Thru14KIT1000003 40mm Plug to Make BBH Cool Thru14KIT1000004 1-1/2" Plug to Make BBH Cool Thru39KIT1000015 20mm Plug to Make BBH Cool Thru39KIT1000015 20mm Plug to Make BBH Cool Thru38KIT1000020 Plug for 32mm BBH to Make Cool Thru14KIT1000024 25mm Plug to Make BBH Cool Thru13KIT1003003 40mm Plug to Make BBH Cool Thru13KIT1003004 1-1/2" Plug to Make BBH Cool Thru

M48MTSK40A02 MTSK-40 Adaptor ER3248MTSK40A03 MTSK-40 Adaptor ER2548MTSK40B02 MTSK-40 Adaptor ERA2548MTSK40B03 MTSK-40 Adaptor ERA2048MTSK40C02 MTSK-40 Adaptor Mill 16x1748MTSK40C03 MTSK-40 Adaptor Mill 3/4"48MTSK40C04 MTSK-40 Adaptor Mill 22x1948MTSK40C05 MTSK-40 Adaptor Mill 27x2148MTSK40D11 MTSK-40 Adaptor Weldon 1/4"48MTSK40D12 MTSK-40 Adaptor Weldon 5/16"48MTSK40D13 MTSK-40 Adaptor Weldon 3/8"48MTSK40D14 MTSK-40 Adaptor Weldon 1/2"49MTSK50A01 MTSK-50 Adaptors ER4049MTSK50A02 MTSK-50 Adaptors ER3249MTSK50A03 MTSK-50 Adaptors ER2549MTSK50B01 MTSK-50 Adaptors ERA3249MTSK50B02 MTSK-50 Adaptors ERA2549MTSK50B03 MTSK-50 Adaptors ERA2049MTSK50C02 MTSK-50 Adaptors Mill49MTSK50C03 MTSK-50 Adaptors Mill49MTSK50C04 MTSK-50 Adaptors Mill49MTSK50C05 MTSK-50 Adaptors Mill49MTSK50C06 MTSK-50 Adaptors Mill49MTSK50D11 MTSK-50 Adaptor Weldon49MTSK50D12 MTSK-50 Adaptor Weldon49MTSK50D13 MTSK-50 Adaptor Weldon49MTSK50D14 MTSK-50 Adaptor Weldon49MTSK50D15 MTSK-50 Adaptor Weldon49MTSK50E01 MTSK-50 Adaptor Weldon50MTSK63A01 MTSK-63 Clamping Unit ER5050MTSK63A02 MTSK-63 Clamping Unit ER4050MTSK63A03 MTSK-63 Clamping Unit ER3250MTSK63A04 MTSK-63 Clamping Unit ER2550MTSK63B01 MTSK-63 Clamping Unit ERA4050MTSK63B02 MTSK-63 Clamping Unit ERA3250MTSK63B03 MTSK-63 Clamping Unit ERA2550MTSK63C02 MTSK-63 Clamping Unit 16x1750MTSK63C03 MTSK-63 Clamping Unit 3/4"x3/4"50MTSK63C04 MTSK-63 Clamping Unit 22x1950MTSK63C05 MTSK-63 Clamping Unit 1"x3/4"50MTSK63C06 MTSK-63 Clamping Unit 27x2150MTSK63E01 MTSK-63 POWERGRIP PG32

2MZK0010017 Radial Redirected Mill Head 16x17mm2MZK0010019 Radial Redirected Mill Head 22x19mm2MZK0010025 Radial Redirected ER252MZK0010027 Radial Redirected Mill Head 27x21mm2MZK0010032 Radial Redirected ER32

2MZK0011227 Radial Redirected Geared Down 2:1 Mill Head 2MZK0011232 Radial Redirected Geared Down 2:1 ER32 3MZK0012125 Radial Redirected Geared Up 1:2 ER25 3MZK0012132 Radial Redirected Geared Up 1:2 ER32 5MZK0020022 Axial Mill Head 22x19mm5MZK0020027 Axial Mill Head 27x21mm5MZK0020132 Axial ER32 Standard5MZK0020140 Axial ER40 Standard5MZK0020240 Axial ER40 Cool Thru*5MZK0021032 Axial ER32 Cool Thru*5MZK0021132 Axial ER32 Standard5MZK0021140 Axial ER40 Standard5MZK0021232 Axial ER32 Cool Thru*5MZK0021240 Axial ER40 Cool Thru*

12MZK0032500 Radial Single Tool : 25mm12MZK0032540 Radial Single Tool : 1"12MZK0042500 Radial Double Tool: 25mm12MZK0042540 Radial Double Tool: 1"13MZK0052500 Axial Single Tool: 25mm13MZK0052540 Axial Single Tool: 1"12MZK0060132 Radial Double Blade Holder13MZK0073810 Axial Boring Bar Holder: 1-1/2"13MZK0074000 Axial Boring Bar Holder: 40mm14MZK0083810 Axial Boring Bar Holder: 1-1/2"14MZK0084000 Axial Boring Bar Holder: 40mm

1MZK0090225 Radial ERA25 Standard1MZK0090232 Radial ER32 Standard1MZK0091232 Radial ER32 Cool Thru*1MZK0092219 Radial Mill Head 22x19mm

19MZK0121032 Radial Redirected ER32 Cool Thru*19MZK0121116 Radial Redirected Mill Head 16x17mm 19MZK0121122 Radial Redirected Mill Head 22x19mm 19MZK0121125 Radial Redirected ER2519MZK0121127 Radial Redirected Mill Head 21x27mm 19MZK0121132 Radial Redirected ER3220MZK0121227 Radial Geared-Down Mill Head 27x21mm 20MZK0121232 Radial Geared-Down 2:1 ER32 19MZK0122125 Radial Geared-Up 1:2 ER2519MZK0122132 Radial Geared-Up 1:2 ER3220MZK0122432 Radial Geared-Down 2:1 ER32 Cool Thru*22MZK0130132 Axial ER32 Standard22MZK0130140 Axial ER40 Standard22MZK0130240 Axial ER40 Cool Thru*22MZK0131032 Axial ER32 Cool Thru*22MZK0132219 Axial Mill Head 22x19mm22MZK0132721 Axial Mill Head 27x21mm42MZK0171100 Gear Hobber42MZK0172100 Geared-Down Gear Hobber 2:137MZK0191100 Gear Hobber37MZK0192100 Geared-Down Gear Hobber 2:131MZK0201116 Radial Mill Head D=16mm, L=17mm31MZK0201122 Radial Mill Head D=22mm, L=19mm31MZK0201125 Radial Redirected ER2531MZK0201127 Radial Mill Head D=27mm, L=21mm31MZK0201132 Radial Redirected ER3231MZK0202125 Radial Redirected Geared-Up ER2531MZK0202132 Radial Redirected Geared-Up ER32

7MZK0210232 Axial Opposite Face Rear-Set ERA32/ERA3214MZK0222500 Axial 3+3 Position BBH 25mm20MZK0231025 Radial Reinforced ER25 Cool Thru*20MZK0231032 Radial Reinforced ER32 Cool Thru*20MZK0231116 Radial Reinforced Mill Head 16x17mm20MZK0231122 Radial Reinforced Mill Head 22x19mm20MZK0231125 Radial Reinforced ER2520MZK0231127 Radial Reinforced Mill Head 27x21mm20MZK0231132 Radial Reinforced ER32

Table of ContentsPart Number Index

21MZK0231216 Radial Mill Head Geared-Down 16x17mm21MZK0231222 Radial Mill Head Geared-Down 22x19mm21MZK0231225 Radial Geared-Down ER2521MZK0231227 Radial Mill Head Geared-Down 27x21mm21MZK0231232 Radial Geared-Down ER3221MZK0232125 Radial Reinforced Geared-Up ER2521MZK0232132 Radial Reinforced Geared-Up ER3221MZK0232425 Radial Geared Down ER25 Cool Thru*21MZK0232432 Radial Geared-Down ER32 Cool Thru*

3MZK0241116 Radial Reinforced Mill Head 16x17mm3MZK0241122 Radial Reinforced Mill Head 22x19mm3MZK0241125 Radial Reinforced ER253MZK0241127 Radial Reinforced Mill Head 27x21mm3MZK0241132 Radial Reinforced ER324MZK0241216 Radial Reinforced Geared-Down Mill Head

16x17mm 4MZK0241222 Radial Reinforced Geared-Down Mill Head

22x19mm4MZK0241225 Radial Reinforced Geared-Down ER254MZK0241227 Radial Reinforced Geared-Down Mill Head

27x21mm 4MZK0241232 Radial Reinforced Geared-Down ER324MZK0242125 Radial Geared-Up Reinforced ER254MZK0242132 Radial Geared-Up Reinforced ER329MZK0250120 (0-180) Adj. Angle ERA209MZK0250220 (0-180) Adj. Angle ERA20 Cool Thru*

10MZK0250316 (0-180) Adj. Angle Geared Up ERA1610MZK0250416 (0-180) Adj. Angle Geared Up ERA16 Cool Thru*

9MZK0255120 (0-180) Adj. Angle ERA20 with Digital Display9MZK0255220 (0-180) Adj. Angle ERA20 with Digital Display Cool

Thru*10MZK0255316 (0-180) Adj. Angle ERA16 Geared-Up 1:2 with

Digital Display10MZK0255416 (0-180) Adj. Angle ERA16 Geared-Up 1:2 with

Digital Display Cool Thru*15MZK0260120 (0-180) Adj. Angle ERA2015MZK0260220 (0-180) Adj. Angle ERA20 Cool Thru*16MZK0260316 (0-180) Adj. Angle Geared Up ERA1616MZK0260416 (0-180) Adj. Angle Geared Up ERA16 Cool Thru*15MZK0265120 (0-180) Adj. Angle ERA20 with Digital Display15MZK0265220 (0-180) Adj. Angle ERA20 with Digital Display Cool

Thru*16MZK0265316 (0-180) Adj. Angle Geared-Up ERA16 with Digital

Display16MZK0265416 (0-180) Adj. Angle Geared-Up ERA16 with Digital

Display Cool Thru*25MZK0270120 (0-180) Adj. Angle ERA2025MZK0270220 (0-180) Adj. Angle ERA20 Cool Thru*26MZK0270316 (0-180) Adj. Angle Geared Up ERA1626MZK0270416 (0-180) Adj. Angle Geared Up ERA16 Cool Thru*26MZK0275120 (0-180) Adj. Angle ERA20 with Digital Display26MZK0275220 (0-180) Adj. Angle ERA20 with Digital Display Cool



Display Cool Thru*6MZK0280140 Axial MTSK-406MZK0280240 Axial MTSK-40 Cool Thru*

22MZK0290140 Axial MTSK-40 22MZK0290240 Axial MTSK-40 Cool Thru*44MZK0302500 Radial Single Static Tool 25mm44MZK0302540 Radial Single Static Tool 1"45MZK0310332 Axial ERA32 Standard45MZK0310432 Axial ERA32 Cool Thru*45MZK0320332 Radial ERA32 Standard47MZK0330132 Radial Blade Holder46MZK0340100 Broaching/Slotting Driven Tool 50mm Stroke

46MZK0340100H=87mm

46MZK0340200 Broaching/Slotting Driven Tool 25mm StrokeH=87mm

17MZK0351100 Driven Gear Hobber17MZK0352100 Driven Gear Hobber Geared-Down43MZK0360140 Axial Geared-Down 2:1 Driven Tool ER4043MZK0360240 Axial Geared-Down 2:1 Driven Tool ER40 Cool

Thru*24MZK0370016 Axial Geared-Up 1:3 ER16

6MZK0390016 Axial Geared-Up Driven Tool ER1628MZK0400100 Broaching/Slotting Driven Tool 50mm Stroke

H=130mm28MZK0400200 Broaching/Slotting Driven Tool 25mm Stroke

H=130mm32MZK0410132 Axial Driven Tool ER3232MZK0410140 Axial Driven Tool ER4032MZK0410232 Axial Driven Tool ER32 Cool Thru*32MZK0410240 Axial Driven Tool ER40 Cool Thru*32MZK0410522 Axial Mill Head 22x19mm32MZK0410527 Axial Mill Head 27x21mm33MZK0420140 Axial MTSK-40 Driven Tool33MZK0420240 Axial MTSK-40 Driven Tool Cool Thru*33MZK0430016 Axial Geared-Up 1:3 Driven Tool ER1611MZK0440100 Broaching/Slotting Driven Tool 50mm Stroke

H=130mm11MZK0440200 Broaching/Slotting Driven Tool 25mm Stroke

H=130mm7MZK0470225 Axial Opposite Face Geared-Up ERA25+ERA25

23MZK0480132 Axial Geared-Down Driven Tool ER3223MZK0480232 Axial Geared-Down Driven Tool ER32 Cool Thru*29MZK0514010 Radial Single Static Capto C429MZK0515010 Radial Single Static Capto C530MZK0524010 Axial Single Static Capto C430MZK0525010 Axial Single Static Capto C5

8MZK0530120 (0-180) Adj. Angle ER20 with Digital Display8MZK0530125 (0-180) Adj. Angle ER25 with Digital Display8MZK0530516 (0-180) Adj. Angle 16x17mm with Digital Display8MZK0530519 (0-180) Adj. Angle 3/4"x3/4" with Digital Display8MZK0530522 (0-180) Adj. Angle 22x19mm with Digital Display

25MZK0540120 (0-180) Adj. Angle ER20 with Digital Display25MZK0540125 (0-180) Adj. Angle ER25 with Digital Display25MZK0540516 (0-180) Adj. Angle 16x17mm with Digital Display25MZK0540519 (0-180) Adj. Angle 3/4"x3/4" with Digital Display25MZK0540522 (0-180) Adj. Angle 22x19mm with Digital Display35MZK0550120 (0-180) Adj. Angle ERA2035MZK0550220 (0-180) Adj. Angle ERA20 Cool Thru*36MZK0550316 (0-180) Adj. Angle Geared-Up 1:2 ERA1636MZK0550416 (0-180) Adj. Angle Geared-Up 1:2 ERA16 Cool

Thru*35MZK0555120 (0-180) Adj. Angle ERA20 with Digital Display35MZK0555220 (0-180) Adj. Angle ERA20 with Digital Display Cool



Display Cool Thru*38MZK0563200 Axial Single Boring Bar Holder 32mm H=130mm13MZK0570132 Radial Double Blade Holder Cool Thru*

8MZK0580120 (0-180) Adj. Angle ER208MZK0580125 (0-180) Adj. Angle ER258MZK0580516 (0-180) Adj. Angle 16x17mm8MZK0580519 (0-180) Adj. Angle 3/4"x3/4"8MZK0580522 (0-180) Adj. Angle 22x19mm

24MZK0590120 (0-180) Adj. Angle ER2024MZK0590125 (0-180) Adj. Angle ER2524MZK0590516 (0-180) Adj. Angle 16x17mm24MZK0590519 (0-180) Adj. Angle 3/4"x3/4"24MZK0590522 (0-180) Adj. Angle 22x19mm


41MZK0600120 (0-180) Adj. Angle ER2041MZK0600125 (0-180) Adj. Angle ER2541MZK0600516 (0-180) Adj. Angle 16x17mm41MZK0600519 (0-180) Adj. Angle 3/4"x3/4"41MZK0600522 (0-180) Adj. Angle 22x19mm41MZK0610120 (0-180) Adj. Angle ER20 with Digital Display41MZK0610125 (0-180) Adj. Angle ER25 with Digital Display41MZK0610516 (0-180) Adj. Angle 16x17mm with Digital Display41MZK0610519 (0-180) Adj. Angle 3/4"x3/4" with Digital Display41MZK0610522 (0-180) Adj. Angle 22x19mm with Digital Display23MZK0620125 Axial Geared-Up 1:3 ER25

1MZK0640140 Radial MTSK40 1MZK0640240 Radial MTSK40 Cool Thru*

18MZK0653175 Axial Single Boring Bar Holder 1-1/4"18MZK0653200 Axial Single Boring Bar Holder 32mm

4MZK0660332 Radial ±25° Adj. Angle ERA32 Re-Directed by 50mm34MZK0680120 Axial Multiple 2/4 Outlet ER2034MZK0680220 Axial Multiple 2/4 Outlet ER20+ER2039MZK0692000 Axial 3+3 Position BBH 20mm40MZK0701905 Axial 6 Position BBH 3/4"34MZK0720225 Axial Single Side Twin Head ER2539MZK0742000 Axial 2+2 Double Boring Bar Holder 20mm39MZK0743175 Axial 2+2 Double Boring Bar Holder 1-1/4"38MZK0751905 Radial Single Twin Static Tool 3/4"32MZK0760225 Radial Single Side Twin Head ERA2545MZK0810232 Axial Opposite Face Rear Set ERA32+ERA3229MZK0842500 Radial Double Static Tool 25mm

P51P01Z20A100 2-Insert Polygon Making Head (with Inserts)51P01Z30A100 2-Insert Polygon Making Head (with Inserts)

T51TPGN220408 10 Inserts for Polygon Making Heads51TPGN220408 10 Inserts for Polygon Making Heads


DRIVEN and STATIC TOOLING MAZAK · Live Tooling M. T. Marchetti, a major live tool manufacturer in...

Documents

Transcript of DRIVEN and STATIC TOOLING MAZAK · Live Tooling M. T. Marchetti, a major live tool manufacturer in...