Dremel Catalog

19
Kipper Tool Company 1-800-295-9595 Fax 1-800-295-9596 [email protected] www.kippertool.com (6/00) DREMEL DRE-01 PROFESSIONAL HIGH SPEED ROTARY TOOL PROFESSIONAL HIGH SPEED ROTARY TOOL KIT Don’t See What You Need ? Call 1-800-295-9595 Made in USA Features / Benefits 1. Electric feedback controller. Enhances overall torque and performance at low & mid-speed ranges. 2.Variable speeds (5,000 - 30,000 RPM). Provides increased control & precision. 3. Separate on / off and variable speed buttons. Provides easy access & convenient speed adjustment. 4. Digital LCD readout. Provides accurate speed readouts in 1,000 RPM increments. 5. “Soft Start”. Allows the tool to come up to a selected speed gradually. 6. Ergonomic design. Balanced, easy to handle & comfortable to use. 7. Ball bearing construction. Smooth & quiet operation. 8. Unique fan design. Maximizes airflow for cool motor performance. 9. Replaceable motor brushes. Longer tool life. 10. Accepts all Dremel rotary tool accessories and attachments. Motor: 120V, 50-60 Hz, AC, 1.15 Amps. Power Cord: 10’ RPM: 5,000 - 30,000 Contents • Professional High Speed Rotary Tool • Customized Storage Case • Collect Wrench • 25 Assorted Accessories • 175+ Uses Book Dremel Cat. No. 3981

Transcript of Dremel Catalog

Page 1: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-01

PROFESSIONAL HIGH SPEED ROTARY TOOL

PROFESSIONAL HIGH SPEED ROTARY TOOL KIT

Don’t See What You Need ?Call 1-800-295-9595

Made in USA

Features / Benefits

1. Electric feedback controller.Enhances overall torque and performance at low & mid-speed ranges.

2.Variable speeds (5,000 - 30,000 RPM).Provides increased control & precision.

3. Separate on / off and variable speed buttons.Provides easy access & convenient speed adjustment.

4. Digital LCD readout.Provides accurate speed readouts in 1,000 RPM increments.

5. “Soft Start”.Allows the tool to come up to a selected speed gradually.

6. Ergonomic design.Balanced, easy to handle & comfortable to use.

7. Ball bearing construction.Smooth & quiet operation.

8. Unique fan design.Maximizes airflow for cool motor performance.

9. Replaceable motor brushes.Longer tool life.

10. Accepts all Dremel rotary tool accessories and attachments.

Motor: 120V, 50-60 Hz, AC, 1.15 Amps.Power Cord: 10’ RPM: 5,000 - 30,000

Contents

• Professional High Speed Rotary Tool• Customized Storage Case• Collect Wrench• 25 Assorted Accessories• 175+ Uses Book

Dremel

Cat. No.3981

Page 2: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-02

MULTIPROTM HIGH SPEED ROTARY TOOL

MULTIPROTM SINGLE SPEEDROTARY TOOL

Features / Benefits

1. High speed rotary tool with speeds up to 30,000 RPM.Speed does the work!

2. Slide switch controls on / off & variable RPM.Convenient & easy to adjust.

3. Lightweight design fits your hand comfortably.Easy to handle & use in any position.

4. Cool running, ball bearing construction.Smooth & quiet operation.

5. Replaceable motor brushes.Longer tool life.

6. 175+ uses book.Shows applications & tips for effective use of the tool (included with most rotary tools).

7. Accepts over 150 Dremel accessories.8. Can be used with a variety of versatile

attachments.

Cat. No.395

Contents

• Variable Speed Multipro Tool• Quick Change Collect Nut• Collect Wrench• 5 Assorted Accessories• 175+ Uses Book

• 30,000 RPM• Ideal for grinding, sanding carving & drilling.

• Can be used with external speed control.

Motor: 120V, 50-60 Hz, AC, 1.15 Amps.Power Cord: 6’ RPM: 30,000

MULTIPROTM TWO SPEEDROTARY TOOL

• 15,000 & 30,000 RPM• Ideal for multiple applications on a variety of materials.

Motor: 120V, 50-60 Hz, AC, 1.15 Amps.Power Cord: 6’ RPM: 15,000 & 30,000

MULTIPROTM VARIABLE SPEEDROTARY TOOL

• 15,000 & 30,000 RPM• Ideal for multiple applications on a variety of materials.

Motor: 120V, 50-60 Hz, AC, 1.15 Amps.Power Cord: 6’ RPM: 15,000 & 30,000

MULTIPROTM VARIABLE SPEEDROTARY TOOL

• 15,000 - 30,000 RPM• Provides control and precision cutting action.

• Ideal for special do-it-yourself projects using various speed ranges for added versatility.

Motor: 120V, 50-60 Hz, AC, 1.15 Amps.Power Cord: 6’ RPM: 15,000 - 30,000

VARIABLE SPEED MULTIPROTM TOOL KIT

www.kippertool.com

Page 3: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-03

Contents

• Variable Speed Multipro Tool• Customized Storage Case• Wrench• 72 Assorted Accessories• 175+ Uses Book

VARIABLESPEED

MULTIPROTM

KIT

Contents

• Variable Speed Multipro Tool• Flex-Shaft Attachment• “New” Customized Storage Case• Wrench• 72 Assorted Accessories• 175+ Uses Book

VARIABLESPEED

MULTIPROTM

SUPER KIT

Cat. No.2850

Contents

• Two Speed Multipro Tool• Quick Change Collet Nut• Customized Storage Case• Wrench• 30 Assorted Accessories• 175+ Uses Book

TWO SPEED MULTIPROTM

KIT

Cat. No.275

Contents

• Single Speed Multipro Tool• Quick Change Collet Nut• Wrench• 5 Assorted Accessories• 175+ Uses Book

SINGLE SPEED MULTIPROTM TOOL KIT

Cat. No.2750

Contents

• Single Speed Multipro Tool• Quick Change Collet Nut• Accessory Holder• Wrench• 15 Assorted Accessories• 175+ Uses Book

SINGLE SPEED MULTIPROTM KIT

Cat. No.565

Includes cutting guide, (2) drywall cuttingbits for cutting drywall for electrical boxes& air vents. (1) Multipurpose cutting bit formaking cuts in ceiling, tile, wood, plastic,fiberglass, drywall, laminate and vinyl siding.

CUTTING KITS

MULTIPROTM

TOOL ATTACHMENTS

Cat. No.3956

MULTIPURPOSECUTTING KIT

Cat. No.566

Includes cutting guide, (1) tile cutting bit forfor shaping ceramic wall tile around fixturesor plumbing pipes. Not for use on ceramicfloor tile.

TILE CUTTING KIT

Cat. No.3955

Provides controlled cutting in a variety ofmaterials.1. Easily attaches to corded Rotary Tool in

place of the housing cap.2. Easy depth adjustment. Set cutting

depth to 19 mm material thickness.

Don’t See What You Need ?

Call 1-800-295-9595

Dremel

Page 4: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-04

Cat. No.231

Converts your corded Rotary Tool into abench mounted wood shaper.

• Features an adjustable fence and large 8” x 6” worktable.

• Slot, groove, sand and trim edges.

SHAPER / ROUTER TABLE

Cat. No.1453

• Easily sharpen the dullest of chains.• Use with rotary tools Nos. 275, 285, 395, 398 and 595.

Contents

• Sharpening Attachment• 3 Sharpening Stones Nos. 453, 454 & 455• Gauge• 2 Spacers• Instruction Manual

Tool not included with attachments.

CHAIN SAW SHARPENINGATTACHMENT KIT

Cat. No.212

Convert your corded Rotary Tool into a drillpress.• Includes rack & pinion feed lever, large base and many other features of larger units.

• Easily modifies to a tool holder for added versatility.

Tool not included with attachments.

DRILL PRESSATTACHMENT

Cat. No.225

Ideal for hard to reach places.• Easily attaches to corded Rotary Tool.• Cable is 36” long with a slim 1/2” diameter handpiece.

Tool not included with attachments.

FLEX SHAFTATTACHMENT

Cat. No.2222

Conveniently suspends any Dremel RotaryTool above your workbench.• Perfect for use with the Flex-Shaft attachment.

• Clamps to workbenches up to 2” thick, and adjusts in height from 12” to 42”.

• Store extra bits on base.

Tool not included with attachments.

FLEX SHAFTTOOL

HOLDER

ROTARY ATTACHMENT

Don’t See What You Need ?

Call 1-800-295-9595

Features / Benefits

1. Convenient bit storage in handle2. Reversible edge guide gives precise

straight line cuts.3. Perfect for freehand routing,4. Routs accurate circles.

Tool not included with attachment.

Cat. No.330

Page 5: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-05

Cat. No.15009

• Free hands for better control.• Variable speed from 0 to full RPM.• 6 Amp. capacity.

*Use only with single speed rotary tools.

TOOL STORAGE CASE

Cat. No.15010

DELUXE STORAGE CASE

Cat. No.221

FOOT SPEED CONTROL*

• Firmly holds rotary tool in any position.• Control workplace (hands free) for better results.

Cat. No.2217

TOOL HOLDER & BASE

• Vise swivels 360o and tilts 180o in all directions.

• Jaws open to 4-1/2”.

Cat. No.2214

D-VISE

• For ease of changing bits.

Cat. No.90962

WRENCH

MISCELLANEOUS ACCESSORIES

MULTIPROTM CORDLESS / MINIMITE® ROTARY TOOLS

Cat. No.7700

Motor: 7.2V DC2 Speed: 7500 / 15,000 RPM Collet Cap.: 1/32” - 1/8” (0,79 mm - 3,18 mm)Weight With Battery.: 12 oz. (340 g)

Cat. No.750

Motor: 4.8V DC2 Speed: 5000 / 10,000 RPM Collet Cap.: 1/32” - 1/8” (0,79 mm - 3,18 mm)Weight With Battery.: 9 oz. (255 g)

Features / Benefits

1. Light and compact.Easy to handle and fun to use anywhere.

2.Two speeds.For better control & accuracy.

3. Removable battery packs.Continuous use to finish your projects.

4. Unique knurled collet nut.Fast accessory change; no wrench needed.

5. 3 Hour charger.Quick battery recharge with LED charging indicator light.

6. Accepts over 150 Dremel accessories.

Contents• 7.2 V Two Speed Cordless Multipro

• Quick Change Collet Nut• Customized Storage Case• 3 Hour Charger• 25 Assorted Accessories• 175+ Uses Book

Additional Accessories• 757 Battery Pack• 758 3 Hour Battery Charger• 759 1 Hour Battery Charger

Contents

• 4.8 V Two Speed Minimite• Quick Change Collet Nut• 3 Hour Charger• Assorted Accessories

Additional Accessories

• 755 Battery Pack• 756 3 Hour Battery Charger

MULTIPROTM

CORDLESSKIT

MINIMITE® CORDLESS KIT

755

757

758

759 756

Page 6: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-06

HEAVY DUTY FLEX-SHAFT TOOLS

Motor: 1/5 HP 120V, 2 Amps (120 V 2,0 A)2 Speed: 22,000 RPM Ft. Spd Control: 0-22,000 RPM, 6 Amps.

(6,0 A) #221Tool Weight: 2 lbs. 15 oz. (1,3 kg)

Features / Benefits1. High torque & long life motor.

Powerful 1/5 h.p. Ideal for professional / industrial, hobby and craft applications.

2. High speed (22,000 RPM).For professional control.

3. Ball bearing motor construction.For smooth performance action.

4. Built in hanger.For out of the way placement during use.

5. Accepts most standard handpieces.For added versatility.

Contents• Heavy Duty Flex-Shaft Tool• 39” neoprene covered Flex-Shaft with spring strain reliefs (accepts most quick disconnect handpieces).

• Lubricant.

HEAVY DUTY

FLEX-SHAFTTOOL

Cat. No.732

All handpieces feature sealed ball bearingconstruction for long life and cool running.Knurled aluminum body for non-slip grip.235 - Accepts collets & bits 1/8” or less:includes 1/8” & 3/32” collets & wrench. 236 - Accepts collets & bits 3/32” - 1/4”:includes 1/8” & 1/4” collets & wrench. 237 - Accepts collets & bits 1/8” or less:includes 1/8” & 3/32” collets & wrench.

HEAVY DUTY FLEX-SHAFT TOOL

ACCESSORIES & ATTACHMENTS

Cat. No.2222

Conveniently suspends any Dremel RotaryTool above your workbench.• Perfect for use with the Flex-Shaft attachment.

• Clamps to workbenches up to 2” thick, and adjusts in height from 12” to 42”.

• Store extra bits on base.Tool not included with attachments.

FLEX SHAFTTOOL

HOLDER

Cat. No.2223

Detachable 360o swivel base makes workeasier by securely holding tool on workbench.

TABLE TOP HOLDER

• Free hands for better control.• Variable speed from 0 to full RPM.• 6 Amp. capacity.

*Use only with single speed rotary tools.

Cat. No.221

FOOT SPEED CONTROL*

Collets for heavy duty Flex-ShaftHandpiece No. 236.

COLLETS

585

1/8”3,2

3/16”4,8

1/4”6,3

3/32”2,3

586 587 590

Contents• Heavy Duty Flex-Shaft Tool• 39” neoprene covered Flex-Shaft with spring strain reliefs.

• 1” handpiece (model 236) for rough sanding and heavy work. Accepts 1/4” collets.

• Foot speed control (model 221) for 0-full RPM control.

• Wrench and lock pin.• Lubricant.

HEAVY DUTY FLEX-SHAFTROTARY TOOL

Cat. No.7360

4-1/2”114,3 mm

1/2”

12,7 mm

5-1/4”133,4 mm

1”

25,3 mm

4-1/4”114,3 mm

3/4”(19 mm)

235

236

237

Don’t See What You Need ?Call 1-800-295-9595

Page 7: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-07

ENGRAVING CUTTERS DRYWALL, MULTIPURPOSE

AND TILE CUTTERS

DRYWALL CUTTING BIT

Cat. No.560

Gives you fast clean cuts in drywall.

Do not run in excess of 30,000 RPM.Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals.

MULTIPURPOSE CUTTING BIT

Cat. No.561

Cuts wood, plastic, fiberglass, drywall, lam-inate, aluminum & vinyl siding.

Do not run in excess of 30,000 RPM.

TILE CUTTING BIT

Cat. No.562

Cuts ceramic wall tile, cement board, andplaster. (Not for use on floor tile).

Do not run in excess of 30,000 RPM.

1/32”0,8 mm

1/16”1,6 mm

3/32”2,4 mm

1/32”0,8 mm

1/16”1,6 mm

5/64”1,9 mm

1/32”0,8 mm

3/64”1,2 mm

1/16”1,6 mm

105 106 107 108 109 110 111 112 113

Don’t See What You Need ?Call 1-800-295-9595

DIAMOND WHEEL POINTS

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade,ceramic, glass, hardened steel, semiprecious stones and other hard materials. Bits are covered with diamond particles.

5/64”2,0 mm

11/64”4,4 mm

3/8”9,5 mm

17/64”6,7 mm

3/32”2,4 mm

3/16”4,8 mm

5/64”2,0 mm

3/32”2,4 mm

7103 7105 7117 7120 7122 7123 7134 7144

HIGH SPEED CUTTERS

High speed cutters can be used for shaping, hollowing, grooving, slotting, making taperedholes in soft metals, plastics and woods. No 198 and 199 cutters can be used to make smallslits. Do not run in excess of 30,000 RPM.

1/4”6,4 mm

5/16”7,8 mm

5/16”7,8 mm

1/4”6,4 mm

1/4”6,4 mm

1/8”3,2 mm

1/4”6,4 mm

5/16”7,8 mm

1/4”6,4 mm

1/4”6,4 mm

1/4”6,4 mm

5/16”7,8 mm

3/32”2,4 mm

1/8”3,2 mm

3/16”4,8 mm

5/64”2,0 mm

1/84”3,2 mm

7/32”5,6 mm

9/32”7,0 mm

3/8”9,5 mm

134 144 190 191 192 193 194 196 198 199

100 114 115 116 117 118 121 124 125 131

Dremel

Page 8: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-08

Don’t See What You Need ?

Call 1-800-295-9595

orLook Us Up On The Web

www.kippertool.com

ROUTER BITS

For routing, inlaying, and mortising in wood and other soft materials. Use with Dremel No.230 & 330 Router Attachment and No. 231 Shaper / Router Table. Made of high speed steel.Do not run in excess of 30,000 RPM.

1/4”6,4 mm

Core Box

1/2”12,7 mmChamfer

3/32”2,4 mm

Piloted Beading

1/8”3,2 mm

Corner Rounding

1/4”6,4 mm

V Groove

1/8”3,2 mmStraight

3/16”4,8 mmStraight

1/4”6,4 mmStraight

617 618 612 615 640 650 652 654

TUNGSTEN CARBIDE CUTTERS

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel,cast iron, non ferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Do not run in excess of 30,000 RPM.

1/8”3,2 mm

3/32”2,4 mm

3/32”2,4 mm

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

9901 9902 9903 9904 9905 9906 9909 9910 9911 9912

TUNGSTEN CARBIDE CUTTERS

Use for shaping, smoothing and materialremoval. Use on hardened steel, stainless steel, cast iron, non ferrousmetals, fired ceramics, plastics, hardwoods and other hard materials.Use with 236 handpiece. Do not run in excess of 30,000 RPM.

1/4”6,4 mm

1/4”6,4 mm

1/4”6,4 mm

9951 9953 9955

TUNGSTEN CARBIDE CUTTERS

Use for shaping, smoothing and materialremoval. Use on hardened steel, stainless steel, cast iron, non ferrousmetals, fired ceramics, plastics, hardwoods and other hard materials.Use with 236 handpiece. Do not run in excess of 30,000 RPM.

1/4”6,4 mm

1/4”6,4 mm

9958 9959

STRUCTURED TOOTH TUNGSTEN CARBIDE CUTTERS

Fast cutting sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy,rubber, laminates, particle board, soft metals, ceramic tile. Use 1/4” shank with 236 handpiece.Do not run in excess of 30,000 RPM.

1/4”6,4 mm

1/4”6,4 mm

5/16”7,8 mm

5/16”7,8 mm

5/16”7,8 mm

3/4”19,0 mm

9931 9932 9933 9934 9935 9936

5/8”15,9 mm

5/8”15,9 mm

5/8”15,9 mm

5/8”15,9 mm

1-5/32”29,4 mm

9981 9982 9983 9985 9986

Page 9: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-09

Cat. No.542

For cutting and shaping on soft and hardwoods, fiberglass, plastics and laminates.Do not run in excess of 30,000 RPM.

SILICON CARBIDE GRINDING STONES (BLUE / GREEN)

Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals.Do not run in excess of 30,000 RPM.

9/32”7,0 mm

1/8”3,2 mm

1/8”3,2 mm

3/16”4,8 mm

25/32”19,8 mm

13/32”10,3 mm

1/2”13,0 mm

83142 83322 83702 84922 85422 85602 85622

ALUMINUM OXIDE GRINDING STONES (RED / BROWN)5/8”

15,9 mm7/16”

11,1 mm1/2”

13,0 mm3/8”

9,5 mm5/8”

15,9 mm3/8”

9,5 mm3/16”

4,8 mm1/4”

6,4 mm

903 911 921 932 941 952945

ABRASIVE POINTS

Abrasive points are great for finishing workand light deburring. They can be used forpaint and rust removal without removingany of the base matter.Do not run in excess of 30,000 RPM.

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

516 517 518

ALUMINUM OXIDE ABRASIVE WHEELS

Perfect for cleaning, deburring, removingrust, and polishing of most metals, including stainless steel.Do not run in excess of 30,000 RPM.

1”25,4 mm

500

5/32”4,0 mm

3/16”4,8 mm

7/32”5,6 mm

ALUMINUM OXIDE GRINDING WHEELS

Use for deburring, removing rust and general purpose grinding. Use with Mandrel 402.Do not run in excess of 30,000 RPM.

541 2 Per Pack

CHAIN SAW SHARPENING STONES

Precision ground for quick, easy sharpen-ing of chain saw blades.Do not run in excess of 30,000 RPM.

453 454 455

CUTTING / SHAPING WHEEL(CARBIDE) MANDREL INCLUDED

953

1/4”6,4 mm

5/8”15,9 mm

1/4”6,4 mm

3/16”4,8 mm

3/8”9,5 mm

1”25,4 mm

5/8”15,9 mm

954 971 997 8153 8175 82158193

Use on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring andgeneral purpose grinding of most materials. Do not run in excess of 30,000 RPM. www.kippertool.com

Page 10: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-10

CUT OFF WHEELS

5 Per PackDiameter: 1-1/4” (32,0 mm)Thickness: .045” (4,5 mm)

For slicing and cutting metal, wood andplastic. Cut off wheels make it easy to cutor slot bolts, screws, sheet metal, thin woodand plastic. The cut off wheels cuts onlyalong its edge. Do not attempt to sand orcut curved holes with them.Do not run in excess of 30,000 RPM.

POLISHING ACCESSORIES

Ideal for polishing metals and plastics.Using compound No. 421 with wheels produces a high luster. Do not run inexcess of 30,000 RPM.

Cat. No.426

5 Per PackDiameter: 1-1/4” (32,0 mm)Thickness: .0625” (1,6 mm)

Cat. No.540

CUT OFF WHEELFIBERGLASS REINFORCED

Use with felt or cloth accessories to polishmetals and plastics. Compound will removea dull oxidized film and/or light surfaceimperfections.

Cat. No.421

POLISHINGCOMPOUND

Use with Mandrel 401. Diameter: 1/2”

Cat. No.414

FELT

Cat. No.425 Use with Mandrel 402.

EMERY IMPREGNATED

Cat. No.427 Use with Mandrel 424.

Use with Mandrel 401. Diameter: 3/8”

Cat. No.422

Use with Mandrel 401. Diameter: 1”

Cat. No.429

CUT OFF WHEEL

20 Per PackDiameter: 15/16” (23,8 mm)Thickness: .040” (1,0 mm)

Cat. No.420

HEAVY DUTY CUT OFF WHEEL

36 Per PackDiameter: 15/16” (23,8 mm)Thickness: .025” (0,64 mm)

Cat. No.409

CUT OFF WHEEL

1/4”6,4 mm

1/4”6,4 mm

1/4”6,4 mm

RUBBER POLISHING POINTS

Blue points for finishing and polishing allferrous metals. Removes small burrs andscratch marks left be grinding and sanding,and cleans and defines grooves. Alsoeffective on many stones and ceramic.Do not run in excess of 30,000 RPM.

461 462 463

Page 11: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-11

CLOTH

Cat. No.423 Use with Mandrel 402. Do not run in excess of 30,000 RPM.

Cat. No.502

FLAPWHEELS

Cat. No.411 Course 180 Grit412 Medium 220 Grit413 Fine 240 GritUse with mandrel 402.

3/4”19,0 mm

1/2”13,0 mm

1/8”3,2 mm

BRISTLE BRUSHES

Use for light deburring, cleaningpolishing of silverware, jewelryand other precious metals. Can be used with polishing compound. Do not run inexcess of 15,000 RPM.

403 404 405

3/4”19,0 mm

1/2”13,0 mm

1/8”3,2 mm

STAINLESS STEEL BRUSHES

Stainless steel brushes do notcause “after-rust” when used oncorrosive-resistant materials likepewter, aluminum and stainlesssteel. Do not run in excess of15,000 RPM.

530 531 532

DISCS

402

3/8”9,5 mm

80 Grit

Cat. No.504

Cat. No.505

3/16”4,8 mm

80 Grit

Cat. No.503

3/8”9,5 mm

120 Grit

3/16”4,8 mm

120 Grit

411

412

413

3/4”19,0 mm

1/2”13,0 mm

1/8”3,2 mm

STAINLESS STEEL BRUSHES

Stainless steel brushes do notcause “after-rust” when used oncorrosive-resistant materials likepewter, aluminum and stainlesssteel. Do not run in excess of15,000 RPM.

530 531 532

3/4”19,0 mm

1/2”13,0 mm

1/8”3,2 mm

CARBON STEEL BRUSHES

Versatile brush for removing rustand corrosion, polish metal surfaces. Deburr and blend surface junctures, clean electrical components. Do notrun in excess of 15,000 RPM.

428 442 443

Flapwheels grind and polish flat or contoured surfaces. They are used mosteffectively as a finishing sander after heavier surface sanding and materialremoval is completed.

3/4”19,0 mm

1/2”13,0 mm

1/8”3,2 mm

BRASS BRUSHES

Brass brushes are non sparkingand softer than steel. They willnot scratch soft metals like gold,copper, brass. Do not run inexcess of 15,000 RPM.

535 536 537

Page 12: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-12

MULTIPROTM CHUCK

Cat. No.4486

SANDING BANDS & DISCS

The Dremel MultioPro chuck allows you toquickly and easily change accessories onyour Dremel MultiPro rotary tools withoutchanging collets. Will accept accessorieswith 1/32” - 1/8” shanks. Use only with cord-ed MultiPro rotary tool models 395, 285,275, and 595.

DRESSING STONE

Cat. No.415

Clean grinding wheels. Shape or reshapefor desired applications.

CARBON MOTOR BRUSHES

Cat. No. Tools Type90826 26090827 270, 280,

370 & 38090828 232 & 33290935 73290929 275, 285 1 & 2

& 39590930 275, 285, 3, 4 & 5

395 & 59590930 6000 1 & 2

QUICK CHANGE COLLET NUT SET

Includes collet nut and 4 collets. For use with all rotary tools except models1, 2, & 260, 270, 280 series 1 or earlier.

1/8”3,2 mm

3/32”2,4 mm

1/16”1,6 mm

1/32”0,8 mm

1”25,4 mm

3/8”9,5 mm

1/8” INCH DRILL

Cat. No.150

480 481 482 483

For rough shaping and smoothing wood and fiberglass; removing rust from metal surfaces;shaping rubber surfaces. Sander bands are easily replaceable on drums.

Diameter 60 Grit 120 Grit Shank

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

1/4”6,4 mm

* Do not run in excess of 30,000 RPM.

† Do not run in excess of 15,000 RPM.

DREMEL

www.kippertool.com

Don’t See What You Need ?

Call 1-800-295-9595

Page 13: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-13

ACCESSORY PROJECT KITS

FURNITURE REFINISHING KIT

Cat. No.620

Decorative carving in furniture; clean outdetail grooves; clean glue off dowels, joints;cuts off dowels; remove glue to redo caningand upholstery. 62 Pieces!

AUTO/CYCLE REPAIR KIT

Cat. No.621

Clean spark plugs; cut off muffler nuts/bolts;rust removal; deburr engine block; grindcylinder heads; cut off hose clamps. 50 Pieces!

HOME IMPROVEMENT KIT

Cat. No.622

Drill holes in wood; sand door locks orjams, window frames or woodwork; cut wire closet organizers; polish door plate or drawer handles; sharpen lawn mower blade or tools. 65 Pieces!

AUTO/CYCLE DETAIL KIT

Cat. No.623

Clean cracks and crevices in the dash orhood; polish chrome emblems; remove rustand paint; brush away dirt and corrosion. 22 Pieces!

HANDYMAN KIT

Cat. No.629

Cut or trim nuts/bolts; fine sanding on furni-ture; drill a hole to hang a picture; sharpenscissors, blades or other tools; polish brassfixtures. 60 Pieces!

CRAFT KIT

Cat. No.630

To shape, sand wood animal figures orornaments; etch designs; miniature doll fur-niture making; cut off backs of earrings andbuttons for decorations. 56 Pieces!

CLEANING / POLISHING SET

Cat. No.624

16 Pieces!

CUTTING / CARVING SET

Cat. No.625

30 Pieces!

SANDING / GRINDING SET

Cat. No.626

44 Pieces!

GENERAL PURPOSE SET

Cat. No.627

50 Pieces!

w w w . k i p p e r t o o l . c o m

Page 14: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-14

HIGH SPEED CUTTER SET

ACCESSORY SETS

Packaged in reusable plastic storage casesto protect your bits.

1/8”3,2 mm

5/16”7,8 mm

5/16”7,8 mm

1/4”6,4 mm

3/16”4,8 mm

7/32”5,6 mm

Cat. No.326

Cat. No.602

115 125 134 192 194 196

CUT-OFF WHEEL SET

Cat. No.690

65 Pieces!

Cat. No.9923

GENERAL PURPOSE SET

Cat. No.695

65 Pieces!

STRUCTURED TOOTH CARBIDE SET

5/16”7,8 mm

1/4”6,4 mm

5/16”7,8 mm

DRILL BIT SET7/64”

2,8 mm5/64”

2,0 mm3/64”

1,2 mm1/32”

0,8 mm1/16”

1,6 mm3/32”

2,4 mm1/8”

3,2 mm

ROUTER BIT SET1/8”

3,2 mm1/8”

3,2 mm1/4”

6,4 mm3/16”

4,8 mm1/8”

3,2 mm1/4”

6,4 mm

610 613 614 615 650 654

9931 9933 9935

TUNGSTEN CARBIDE CUTTER SET

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

1/8”3,2 mm

9901 9903 9905 9905 9905

Do not run accessories in excess of 30,000 RPM. Do not run accessories in excess of 30,000 RPM.

Cat. No.628

Cat. No.9925

DIAMOND WHEEL POINT SET5/64”

2,0 mm3/32”

2,4 mm5/64”

2,0 mm3/32”

2,4 mm

7103 7122 7134Cat. No.9927

7144

Page 15: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-15

CONTOUR SANDER KIT

3/16”4,8 mm

3/8”9,5 mm

5/8”15,9 mm

3/16”4,8 mm

3/8”9,5 mm

5/8”15,9 mm

30” 60o

6018 6020 6022 6024 6026 6028 6032 6030

CONTOUR SANDERFeatures / Benefits

1. Wide selection of accessories.A variety of sandpaper, contour shapes and detail pads sand a range of curved, angled shapes and larger surfaces to eliminate hand sanding.

2. Compact, lightweight design.At under 2 lbs. this tool is designed for hours of comfortable use with precision control.

3. 4,000 - 8,500 variable strokes per minute.Variable speed gives you all the power and control to complete a variety of sanding tasks.

4. Exclusive quick change accessory release.Quickly, change from contour to detail pad without extra keys or wrenches.

5. Long lasting reusable sanding tubes.Sanding tubes slip easily over all contours and can be rotated 360o for longer life.

6. Longer tool life. Cool running ball bear-ing construction and easily replaceablemotor brushes help sander perform longerand operate more efficiently.

Tool Weight: 1.75 lbs. (793,8g)Volts: 120 V ACAmps: 1.15 (1,15)Power Cord: 10’ (3m)Strokes per Minute: 4,000 - 8,500Stroke Length: .060” (1,5 mm)

Cat. No.6000

Cat. No.6048

Contents

• Variable Speed Tool• 10 Sanding Contours• 3 Sanding Tubes• Detail Sanding Pad• 3 Sheets of Detail Pad Sandpaper• Customized Storage Case

DETAIL PAD SANDPAPER

Cat. No. Grit6060 806061 1206062 2206065 1-80, 2-120, 2-220

5 Pieces!

Cat. No.6046

SANDINGTUBES

Cat. No. Grit6050 806052 1206054 2206055 1-80, 2-120, 2-220

5 Pieces!

80

220120

SHUTTER / EXTENSION PAD

CONTOUR ACCESSORIES, 8 PIECE SET

Page 16: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-16

Features / Benefits1. Two speed motor.

Low 890 SPM; High 1790 SPM allows for greater cutting versatility.

2. Quick release tension lever.Quickly adjust blade tension.

3. Quick change blade adapter.For fast plain-end blade changes.

4. Accepts pin and plain-end blades.For cutting wood, plastics and metal.

5. 3/4” blade stroke.6. Smooth 12” round cast

aluminum table.Supports workpiece evenly.

7. Tilt table from 0” to 45o.2” material capacity when flat and 1” capacity when tilted to 45o for bevel cuts.

8. Sturdy cast iron base.9. Vacuum hose dust port.10. Easy access door.

Access lower blade assembly.

11. Saw dust blower.Keeps cutting line clear.

12. Handy blade storage case.

Contents

• Two Speed Saw• Blade Adapter Set• Selection of 13 Blades• 2 Allen Wrenches• Quick Change Blade Adapter and T-Wrench

Direct Drive Motor: 120 V. 50-60 HzAmps LO & HI: 1.65 / 1.68 (1,65 / 1,68)2 Speeds LO & HI: 890 / 1790 SPM (CPM)Max. Cutting Cap: 2” (50,8 mm)Horsepower LO & HI: 1/20 hp (1/20 hp)

1/10 hp (1/10 hp)Blade Stroke: 3/4” (19,0 mm)Weight: 45 lbs. (20,4 kg)3 Wire Grounded Cord: 7 ft. (2,1m)

ENGRAVER

TWO SPEED

SCROLL SAW

290

99249929

DRE 290 Engraver(NSN 5130-01-336-5533)

• Stroke adjustment dialRegulates engraving depth from fine lines to deep grooves.

• Light and compact designComfortable use for precision engraving performance.

• Replaceable carbide and diamond pointsEngrave on soft or hard materials.

Contents

• Engraver Tool• Carbide Point (9924)

Available Accessories

• 9924 Carbide Point (Normal applications)• 9929 Diamond Point (For continuous use)

Motor: 115V, AC / 115 V, 60 Hz,.02 Amps / 0,02 A

Strokes: 7,200 / SPM / 7500 GPMTool Weight: 12 oz (340 g) / (340 g)

Don’t See What You Need ?

Call

1-800-295-9595

12”30.48 cm

16”40.64 cm

Cat. No.1672

Dremel

Page 17: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-17

Cat. No.1680

PIN- END BLADES

Plain-End Blades See Page 18

Features / Benefits

1. Top mounted controls..Upfront controls for easy access.

2. Two way table tilt.Tilts 45o both left and right for two way bevel cutting.

3. Table angle detents.Angle indentation every 15o for consistent bevel cutting, with an indent at 0o to quickly and easily square the table.

4. Tool-less blade holder.No tools needed for fast and easy pin or plain end blade changes.

5. Light.An attached light to improve visibility during use.

6. Dust blower.An adjustable, multidirectional blower to keep cutting line clear.

7. Smooth table finish.An extra smooth finish to provide

effortless workpiece manipulation.8. Variable speed.

Speeds of 500 - 1,600 strokes per minute to cut a variety of materials.

9. Cast iron table.To evenly support your workpiece.

10. Blade holder storage.Handy storage to keep extra blades at your fingertips.

Contents

• 16” Variable Speed Scroll Saw• 12 Blade Assortment

Motor: 1,4 A, 120 V. 60 Hz, 1/6 HPSpeed: 500 - 1,600 SPM (CPM)Blade: 5” (12,7 mm)Blade Stroke: 3/4” (19,0 mm)Cutting Capacity: 2” at 0o, 1” at 45o

Net Weight: 40 lbs. (18,15 kg)

Cat. No.16411

16” VARIABLE SPEED SCROLL SAW

Cat. No.16412

Cat. No.16413

Easiest to take in and out of saw. For tightradius cutting in hard and soft wood. 5 per pack.

BLADE ADAPTER SET

Cat. No.16436

Secures all of the following plain-endblades to the scroll saw’s blade holder.

Not available in Canada

Universal TeethNumber Width Thickness Per Inch7 .110 .018 15

Universal TeethNumber Width Thickness Per Inch7 .110 .018 10

Universal TeethNumber Width Thickness Per Inch2/0 .070 .010 18.5

Page 18: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-18

PLAIN- END BLADES

Cat. No.16440

Cat. No.16443

Cat. No.16446

Cat. No.16463

Cat. No.16432

Cat. No.16433

Cat. No.16448

Cat. No.16453

Allow for extremely tight radius cutting andintricate cuts in wood, plastic, and fibrousmaterials. 5 per pack.

METAL PIERCING BLADES

Cat. No.16483

Cut precious and non-ferrous metals. Mustbe used at slow speed. Perform best whenlubricated with bees wax. 5 per pack.

REVERSE TOOTH BLADES

Provides a smooth, splinter free finish.Leaves a clean, sharp edge on both the topand bottom of your wood piece. 12 per pack.

Cat. No.16461

SPIRAL BLADES

Cut in all directions without turning the workpiece. 5 per pack.

PERMA-GRITTM BLADES

Tungsten carbide coated blades shape andcut ceramic wall tiles. Also for cutting thinwood. Cut in any direction without turningyour workpiece. Not for use on floor tiles. 1 per pack.

Universal TeethNumber Width Thickness Per Inch2/0 .022 .010 28

Universal TeethNumber Width Thickness Per Inch2 .029 .012 20

Universal TeethNumber Width Thickness Per Inch5 .038 .016 12.5

Universal TeethNumber Width Thickness Per Inch7 .045 .017 11.5

Cat. TeethNumber Kerf Per Inch16471 .031-033 60

Cat. TeethNumber Kerf Per Inch16472 .046-048 120

Universal TeethNumber Width Thickness Per Inch12 .062 .020 9.5

Universal TeethNumber Width Thickness Per Inch5 .032 .016 36

Universal TeethNumber Width Thickness Per Inch2R .026 .012 20-F

14-R

Universal TeethNumber Width Thickness Per Inch5R .047 .017 11.5-F

14-R

Universal TeethNumber Width Thickness Per Inch7R .038 .016 12.5-F

9-R

Universal TeethNumber Kerf Per Inch0 .028- .030 46

Cat. No.16463

Universal TeethNumber Kerf Per Inch2 .034- .036 41

Don’t See What You Need ?Call 1-800-295-9595

Page 19: Dremel Catalog

Kipper Tool Company • 1-800-295-9595 • Fax 1-800-295-9596 • [email protected] • www.kippertool.com (6/00)

DREMEL DRE-19

SCROLL SAW ACCESSORIES

MAGNIFIERLAMP

VERSA TIP®

MULTIPURPOSE TOOL

Cat. No.1550

Cat. No.1304

Cat. No.16500

Made in USA

• 6 Different design tips!Replaceable and interchangeable for maximum versatility.

Contents

• Versa Tip Tool• 5 Tips (470, 471, 473, 474 & 499)• Tool Stand• Handy Tip Storage Tube

Accessories

• 470 Soldering Tip• 471 General Purpose Tip• 472 Grading Tip• 473 Script Tip• 474 Fine Cutting Tip• 499 Hot Knife Tip

Max. Tip Temp: 1,050o F (565o C)Volts: 110 - 120V, ACWatts: 30 Tool Length: 7-3/8” (187,3mm)

Multipurpose lamp with 4”diameter, magnifier lensand adjustable 39” armreach for superior worklighting. Includes bracketfor bench or desk topmounting. For models1671, 1672 and 1695.

SCROLL SAWSTAND

Painted finish resistsrusting and leg padskeep stand from slipping.For models 1671, 1672,1680 and 1695.

Dremel

1304

471470

473 474 49947216500

www.kippertool.com